Blue Smart IP67 charger - wirelessly monitored car batteries with Bluetooth Smart Download the VictronConnect app to your smartphone and connect to the battery charger via Bluetooth. This allows you to monitor the voltage, current and charge status wirelessly via the app and keep you fully informed. Less heat and power consumption with high charging power Compared to the industry standard, Victron Blue Smart IP67 chargers emit very little energy to the outside in the form of heat. After a full charge, the power consumption is less than 0.5 watts (W). Corrosion-resistant thanks to aluminum and resin The ingress of liquids and dust is prevented by an aluminum housing. In addition, the coating of the electronics with special industrial resin ensures optimum protection against shocks and ambient heat. In addition, the output current is automatically reduced at temperatures above fifty degrees.

The clever Victron Blue Smart charger IP22 The Victron Blue Smart Charger IP22 is one of the smartest battery chargers on the market. Its particular strengths include the adaptive charging algorithm with six stages (Test, Bulk, Absorption, Recondition, Float and Storgage), which automatically adapts to the type of battery usage. This enables the charger to achieve an efficiency of up to 94 percent with low heat generation. In the event of overheating (over 50 degrees Celsius), the output current is automatically reduced to prevent damage. Innovation at the highest level The charging technology of the Victron Blue Smart charger IP22 impresses with the highest level of innovation. Lithium-ion (LiFePO4) batteries can also be charged. The sophisticated algorithm, consisting of a constant current phase, constant voltage phase and charge retention voltage phase, comes into play here. Thanks to the matching cell phone app, voltage and current can be monitored wirelessly. The settings can also be adjusted at any time. The ability to update the charger makes it a long-term companion. The best care for your batteries The Victron Blue Smart charger IP22 protects the batteries from damage. As soon as the charging process is complete, the power consumption drops to less than 0.5 watts to prevent overcharging. When the batteries are not in use, innovative trickle charging is possible. Among other things, gas development is minimized to prevent corrosion on the positive plates. The voltage is automatically increased once a week to prevent premature battery failure due to electrolyte stratification or sulphation.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

The clever Victron Blue Smart charger IP22 The Victron Blue Smart Charger IP22 is one of the smartest battery chargers on the market. Its particular strengths include the adaptive charging algorithm with six stages (Test, Bulk, Absorption, Recondition, Float and Storgage), which automatically adapts to the type of battery usage. This enables the charger to achieve an efficiency of up to 94 percent with low heat generation. In the event of overheating (over 50 degrees Celsius), the output current is automatically reduced to prevent damage. Innovation at the highest level The charging technology of the Victron Blue Smart charger IP22 impresses with the highest level of innovation. Lithium-ion (LiFePO4) batteries can also be charged. The sophisticated algorithm, consisting of a constant current phase, constant voltage phase and charge retention voltage phase, comes into play here. Thanks to the matching cell phone app, voltage and current can be monitored wirelessly. The settings can also be adjusted at any time. The ability to update the charger makes it a long-term companion. The best care for your batteries The Victron Blue Smart charger IP22 protects the batteries from damage. As soon as the charging process is complete, the power consumption drops to less than 0.5 watts to prevent overcharging. When the batteries are not in use, innovative trickle charging is possible. Among other things, gas development is minimized to prevent corrosion on the positive plates. The voltage is automatically increased once a week to prevent premature battery failure due to electrolyte stratification or sulphation.

The clever Victron Blue Smart charger IP22 The Victron Blue Smart Charger IP22 is one of the smartest battery chargers on the market. Its particular strengths include the adaptive charging algorithm with six stages (Test, Bulk, Absorption, Recondition, Float and Storgage), which automatically adapts to the type of battery usage. This enables the charger to achieve an efficiency of up to 94 percent with low heat generation. In the event of overheating (over 50 degrees Celsius), the output current is automatically reduced to prevent damage. Innovation at the highest level The charging technology of the Victron Blue Smart charger IP22 impresses with the highest level of innovation. Lithium-ion (LiFePO4) batteries can also be charged. The sophisticated algorithm, consisting of a constant current phase, constant voltage phase and charge retention voltage phase, comes into play here. Thanks to the matching cell phone app, voltage and current can be monitored wirelessly. The settings can also be adjusted at any time. The ability to update the charger makes it a long-term companion. The best care for your batteries The Victron Blue Smart charger IP22 protects the batteries from damage. As soon as the charging process is complete, the power consumption drops to less than 0.5 watts to prevent overcharging. When the batteries are not in use, innovative trickle charging is possible. Among other things, gas development is minimized to prevent corrosion on the positive plates. The voltage is automatically increased once a week to prevent premature battery failure due to electrolyte stratification or sulphation.

Das Blue Smart IP22 24/12(1) Ladegerät von Victron Energy (MPN BPC241242002), ist ein professionelles, kompaktes 24V 12A Batterieladegerät der neusten Generation mit einem Ladeausgang und eingebautem Bluetooth! Das Blue Smart IP22 24/12(1) Ladegerät lässt sich mit Geräten in Ihrer Werkstatt oder mit Kraftfahrzeugen wie mit (klassischen) Autos, Motorrädern, Booten und Wohnmobilen verwenden und lädt sowohl klassische 24V Blei-Batterien als auch moderne Lithium Akkus. Es bietet Highlights des 24/12(1) Blue Smart IP22 Charger intelligentes Laden, bis zum perfekten Batteriezustand... Der sieben-stufige Lade-Algorithmus holt das Beste aus Ihrer Batterie heraus. Das Ladegerät liefert der Batterie die Energie, die sie benötigt, hält sie in einem gesunden Zustand, sichert eine bessere Leistung... und ein längeres Leben. Wiederherstellung von tiefen-entladenen "toten" Batterien Anders als die meisten anderen Marken und Produktreihen wird das Blue Smart IP22 Ladegerät versuchen, eine tiefen-entladene Batterie wieder aufzuladen, indem es ihr einen schwachen Ladestrom aufzwingt. Der normale Ladebetrieb wird dann wiederaufgenommen, sobald zwischen den Batterieanschlüssen ausreichend Spannung anliegt. Batteriestatus aus der Ferne abrufen, mit der VictronConnect App Das Blue Smart IP22 24/12(1) Ladegerät verfügt über eingebautes Bluetooth. Auf diese Weise lassen sich der Status des Ladegeräts und der Batterie auf einem Smartphone, Tablet oder Laptop überprüfen. Sämtliche Einstellungen des Ladegerätes können mit der VictronConnect App konfiguriert werden. die wichtigsten technischen Merkmale des 24/12(1) Blue Smart IP22 Charger Victron Teilenummer: BPC241242002lädt 24V Blei-Säure-, Gel-, AGM- und Lithium-Batterien12A maximaler Ladestrom1 Batterie-Ladeausgangsehr kompakte Abmessungen: 235 x 108 x 65mmhoch moderner, sieben-stufiger Lade-Algorithmusmit integriertem Bluetooth zur Nutzung mit der kostenlosen VictronConnect App sonstige Leistungsmerkmale des 24/12(1) Blue Smart IP22 Batterieladers richtungsweisender Wirkungsgrad Mit einem Wirkungsgrad von bis zu 94% erzeugen diese Ladegeräte im Vergleich zum Industriestandard bis zu viermal weniger Wärme. Nachdem die Batterie außerdem vollständig aufgeladen wurde, sinkt der Stromverbrauch auf weniger als 0,5 Watt, das ist etwa fünf bis zehn Mal besser, als der Industriestandard. adaptiver 7-stufiger Lade-Algorithmus Das 24/12(1) Blue Smart-Ladegerät zeichnet sich durch sein mikroprozessorgesteuertes, „adaptives” Batterie-Management aus. “Adaptiv“ bedeutet, dass der Ladevorgang automatisch der Art der Batterienutzung angepasst wird. Lagerungs-Modus: Weniger Wartung und Alterung im Ruhezustand der Batterie Der Lagerungs-Modus wird immer dann aktiviert, wenn innerhalb von 24 Stunden keine Entladung erfolgt ist. Die Ladeerhaltungsspannung wird dann auf 2,2V/Zelle (13,2V für eine 24V-Batterie) gesenkt, um die Gasentwicklung zu minimieren und damit eine Korrosion an den positiven Platten zu verhindern. Einmal pro Woche wird die Spannung auf den Level der Gasungsspannung erhöht. Dadurch wird eine Art Ausgleichsladung erzielt, die die Elektrolytschichtung und die Sulfatierung - die beiden Hauptgründe für vorzeitigen Batterieausfall - verhindert. Lieferumfang: 1x Victron Energy BPC241242002 24/12(1) IP22 Blue Smart Charger 1x Bedienungsanleitung

Das Blue Smart IP22 24/12(1) Ladegerät von Victron Energy (MPN BPC241242002), ist ein professionelles, kompaktes 24V 12A Batterieladegerät der neusten Generation mit einem Ladeausgang und eingebautem Bluetooth! Das Blue Smart IP22 24/12(1) Ladegerät lässt sich mit Geräten in Ihrer Werkstatt oder mit Kraftfahrzeugen wie mit (klassischen) Autos, Motorrädern, Booten und Wohnmobilen verwenden und lädt sowohl klassische 24V Blei-Batterien als auch moderne Lithium Akkus. Es bietet Highlights des 24/12(1) Blue Smart IP22 Charger intelligentes Laden, bis zum perfekten Batteriezustand... Der sieben-stufige Lade-Algorithmus holt das Beste aus Ihrer Batterie heraus. Das Ladegerät liefert der Batterie die Energie, die sie benötigt, hält sie in einem gesunden Zustand, sichert eine bessere Leistung... und ein längeres Leben. Wiederherstellung von tiefen-entladenen "toten" Batterien Anders als die meisten anderen Marken und Produktreihen wird das Blue Smart IP22 Ladegerät versuchen, eine tiefen-entladene Batterie wieder aufzuladen, indem es ihr einen schwachen Ladestrom aufzwingt. Der normale Ladebetrieb wird dann wiederaufgenommen, sobald zwischen den Batterieanschlüssen ausreichend Spannung anliegt. Batteriestatus aus der Ferne abrufen, mit der VictronConnect App Das Blue Smart IP22 24/12(1) Ladegerät verfügt über eingebautes Bluetooth. Auf diese Weise lassen sich der Status des Ladegeräts und der Batterie auf einem Smartphone, Tablet oder Laptop überprüfen. Sämtliche Einstellungen des Ladegerätes können mit der VictronConnect App konfiguriert werden. die wichtigsten technischen Merkmale des 24/12(1) Blue Smart IP22 Charger Victron Teilenummer: BPC241242002lädt 24V Blei-Säure-, Gel-, AGM- und Lithium-Batterien12A maximaler Ladestrom1 Batterie-Ladeausgangsehr kompakte Abmessungen: 235 x 108 x 65mmhoch moderner, sieben-stufiger Lade-Algorithmusmit integriertem Bluetooth zur Nutzung mit der kostenlosen VictronConnect App sonstige Leistungsmerkmale des 24/12(1) Blue Smart IP22 Batterieladers richtungsweisender Wirkungsgrad Mit einem Wirkungsgrad von bis zu 94% erzeugen diese Ladegeräte im Vergleich zum Industriestandard bis zu viermal weniger Wärme. Nachdem die Batterie außerdem vollständig aufgeladen wurde, sinkt der Stromverbrauch auf weniger als 0,5 Watt, das ist etwa fünf bis zehn Mal besser, als der Industriestandard. adaptiver 7-stufiger Lade-Algorithmus Das 24/12(1) Blue Smart-Ladegerät zeichnet sich durch sein mikroprozessorgesteuertes, „adaptives” Batterie-Management aus. “Adaptiv“ bedeutet, dass der Ladevorgang automatisch der Art der Batterienutzung angepasst wird. Lagerungs-Modus: Weniger Wartung und Alterung im Ruhezustand der Batterie Der Lagerungs-Modus wird immer dann aktiviert, wenn innerhalb von 24 Stunden keine Entladung erfolgt ist. Die Ladeerhaltungsspannung wird dann auf 2,2V/Zelle (13,2V für eine 24V-Batterie) gesenkt, um die Gasentwicklung zu minimieren und damit eine Korrosion an den positiven Platten zu verhindern. Einmal pro Woche wird die Spannung auf den Level der Gasungsspannung erhöht. Dadurch wird eine Art Ausgleichsladung erzielt, die die Elektrolytschichtung und die Sulfatierung - die beiden Hauptgründe für vorzeitigen Batterieausfall - verhindert. Lieferumfang: 1x Victron Energy BPC241242002 24/12(1) IP22 Blue Smart Charger 1x Bedienungsanleitung

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP67 charger - wirelessly monitored car batteries with Bluetooth Smart Download the VictronConnect app to your smartphone and connect to the battery charger via Bluetooth. This allows you to monitor the voltage, current and charge status wirelessly via the app and keep you fully informed. Less heat and power consumption with high charging power Compared to the industry standard, Victron Blue Smart IP67 chargers emit very little energy to the outside in the form of heat. After a full charge, the power consumption is less than 0.5 watts (W). Corrosion-resistant thanks to aluminum and resin The ingress of liquids and dust is prevented by an aluminum housing. In addition, the coating of the electronics with special industrial resin ensures optimum protection against shocks and ambient heat. In addition, the output current is automatically reduced at temperatures above fifty degrees.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

The Blue Smart ip22 12/20(1) charger from Victron Energy (mpn bpc122042002), is a professional, compact 12v 20a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/20(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/20(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/20(1) charger features built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/20(1) Blue Smart ip22 Charger Victron Part number: bpc122042002charges 12v lead-acid, gel, agm and lithium batteries20a maximum charge current1 battery charging outputvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/20(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/20(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc122042002 12/20(1) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/20(1) charger from Victron Energy (mpn bpc122042002), is a professional, compact 12v 20a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/20(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/20(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/20(1) charger features built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/20(1) Blue Smart ip22 Charger Victron Part number: bpc122042002charges 12v lead-acid, gel, agm and lithium batteries20a maximum charge current1 battery charging outputvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/20(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/20(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc122042002 12/20(1) ip22 Blue Smart Charger 1x instruction manual

Das Blue Smart IP 67 24/8 24V 230V Akkuladegerät von Victron Energy (MPN BPC240813006) ist ein smartes, hochleistungsfähiges Batterieladegerät der neusten Generation mit 8A Ladestrom zum aufladen von 24V AGM-, Gel- und Bleisäure-Batterien so wie Lithium Ionen Akkus. Vom Funktionsumfang her ist die Blue Smart IP67 Serie bis auf wenige Funktionen identisch mit den Ladegeräten der Blue Smart IP 65 und IP 22 Geräte-Familien. Lediglich die Einsatzumgebung, für die diese Ladegeräte ausgelegt sind, unterscheidet sich.Die Blue Smart IP 67 Batterieladegeräte bieten dank integriertem Bluetooth eine Kabellose Lösung zur Überwachung von Spannung und Strom, zum Anpassen von Einstellungen und zur Aktualisierung des Ladegerätes, wenn neue Funktionen verfügbar sind.wichtige Merkmale des Blue Smart IP67 24/8 8A Batterieladegeräts Victron Teilenummer: BPC240813006Modelbezeichnung: Blue Smart IP 67 24/8max. Ladestrom: 8Afür Batteriespannung: 24V DCfür Netzspannung: 180-265 VAC 45-65 Hzvollständig ummantelt: wasserdicht, stoßgeschu¨tzt und feuerhemmendsmarte Konfiguration und Überwachung über integriertes Bluetooth und kostenlose Appadaptiver, 5-stufiger Ladealgorithmusverlängert das Leben Ihrer Batterien dank integriertem Lagermoduslässt sich zur Stromversorgung von 24V Verbrauchern einsetzenhochwertiges Gehäuse aus AluminiumgussSchutz vor Anwendungsfehlern:  Verpolung an Batterie (Sicherung), Schutz vor Übertemperatur, Schutz vor Ausgangskurzschluss vollständig ummantelt: wasserdicht, stoßgeschützt und feuerhemmendWasser, Öl oder Schmutz können das Blue Smart IP67 Ladegerät nicht beschädigen. Das Gehäuse besteht aus Aluminiumguss und die Elektronik ist mit Harz überzogen.einer der höchsten Ladewirkungsgrade aller Zeiten!Einen neuen Industriestandard setzen: Mit einer Effizienz von mindestens 92 % oder mehr produzieren diese Ladegeräte drei- bis viermal weniger Hitze.adaptiver 5-stufiger LadealgorithmusDas Blue Smart 24/5 IP67 Ladegerät zeichnet sich durch sein mikroprozessorgesteuertes, „adaptives” Batterie-Management aus. “Adaptiv“ bedeutet, dass der Ladevorgang automatisch der Art der Batterienutzung angepasst wird. "Bulk" (Konstantstromphase)"Absorption" (Konstantspannungsphase)"Recondition" (Regenerierungsphase)"Float" (Ladeerhaltungsspannungsphase)"Storage" (Lagermodus) Lagermodus: Weniger Wartung und Alterung im Ruhezustand der BatterieDer Lagermodus wird immer dann aktiviert, wenn innerhalb von 24 Stunden keine Entladung erfolgt ist. Im Lagerungs-Modus wird die Ladeerhaltungsspannung dann auf 2,2 V/Zelle (13,2 V für eine 24-V-Batterie) gesenkt, um eine Gasentwicklung und eine Korrosion an den positiven Platten zu minimieren. Einmal pro Woche wird die Spannung auf den Level der Gasungsspannung erhöht. Dadurch wird eine Art Ausgleichsladung erzielt, die die Elektrolytschichtung und die Sulfatierung - die beiden Hauptgründe für vorzeitigen Batterieausfall - verhindert.wesentliche Unterschiede zur Blue Smart IP 65 FamilieDie beiden Gerätegruppen unterscheiden sich in folgenden Punkten: die Schutzart, die IP 67 Geräte verfügen über den bestmöglichen SchutzBlue Smart IP 65 Gertäte verfügen über einen 7-stufigen Ladealgorithmus , beim IP67 ist er 5-stufig Lieferumfang1x Victron BPC240513006 Blue Smart IP67 24/5 5A 24V 230V Batterieladegerät1x Bedienungsanleitung1x 1,5m Batterieanschlusskabel Rot/Schwarz

Das Blue Smart IP 67 24/8 24V 230V Akkuladegerät von Victron Energy (MPN BPC240813006) ist ein smartes, hochleistungsfähiges Batterieladegerät der neusten Generation mit 8A Ladestrom zum aufladen von 24V AGM-, Gel- und Bleisäure-Batterien so wie Lithium Ionen Akkus. Vom Funktionsumfang her ist die Blue Smart IP67 Serie bis auf wenige Funktionen identisch mit den Ladegeräten der Blue Smart IP 65 und IP 22 Geräte-Familien. Lediglich die Einsatzumgebung, für die diese Ladegeräte ausgelegt sind, unterscheidet sich.Die Blue Smart IP 67 Batterieladegeräte bieten dank integriertem Bluetooth eine Kabellose Lösung zur Überwachung von Spannung und Strom, zum Anpassen von Einstellungen und zur Aktualisierung des Ladegerätes, wenn neue Funktionen verfügbar sind.wichtige Merkmale des Blue Smart IP67 24/8 8A Batterieladegeräts Victron Teilenummer: BPC240813006Modelbezeichnung: Blue Smart IP 67 24/8max. Ladestrom: 8Afür Batteriespannung: 24V DCfür Netzspannung: 180-265 VAC 45-65 Hzvollständig ummantelt: wasserdicht, stoßgeschu¨tzt und feuerhemmendsmarte Konfiguration und Überwachung über integriertes Bluetooth und kostenlose Appadaptiver, 5-stufiger Ladealgorithmusverlängert das Leben Ihrer Batterien dank integriertem Lagermoduslässt sich zur Stromversorgung von 24V Verbrauchern einsetzenhochwertiges Gehäuse aus AluminiumgussSchutz vor Anwendungsfehlern:  Verpolung an Batterie (Sicherung), Schutz vor Übertemperatur, Schutz vor Ausgangskurzschluss vollständig ummantelt: wasserdicht, stoßgeschützt und feuerhemmendWasser, Öl oder Schmutz können das Blue Smart IP67 Ladegerät nicht beschädigen. Das Gehäuse besteht aus Aluminiumguss und die Elektronik ist mit Harz überzogen.einer der höchsten Ladewirkungsgrade aller Zeiten!Einen neuen Industriestandard setzen: Mit einer Effizienz von mindestens 92 % oder mehr produzieren diese Ladegeräte drei- bis viermal weniger Hitze.adaptiver 5-stufiger LadealgorithmusDas Blue Smart 24/5 IP67 Ladegerät zeichnet sich durch sein mikroprozessorgesteuertes, „adaptives” Batterie-Management aus. “Adaptiv“ bedeutet, dass der Ladevorgang automatisch der Art der Batterienutzung angepasst wird. "Bulk" (Konstantstromphase)"Absorption" (Konstantspannungsphase)"Recondition" (Regenerierungsphase)"Float" (Ladeerhaltungsspannungsphase)"Storage" (Lagermodus) Lagermodus: Weniger Wartung und Alterung im Ruhezustand der BatterieDer Lagermodus wird immer dann aktiviert, wenn innerhalb von 24 Stunden keine Entladung erfolgt ist. Im Lagerungs-Modus wird die Ladeerhaltungsspannung dann auf 2,2 V/Zelle (13,2 V für eine 24-V-Batterie) gesenkt, um eine Gasentwicklung und eine Korrosion an den positiven Platten zu minimieren. Einmal pro Woche wird die Spannung auf den Level der Gasungsspannung erhöht. Dadurch wird eine Art Ausgleichsladung erzielt, die die Elektrolytschichtung und die Sulfatierung - die beiden Hauptgründe für vorzeitigen Batterieausfall - verhindert.wesentliche Unterschiede zur Blue Smart IP 65 FamilieDie beiden Gerätegruppen unterscheiden sich in folgenden Punkten: die Schutzart, die IP 67 Geräte verfügen über den bestmöglichen SchutzBlue Smart IP 65 Gertäte verfügen über einen 7-stufigen Ladealgorithmus , beim IP67 ist er 5-stufig Lieferumfang1x Victron BPC240513006 Blue Smart IP67 24/5 5A 24V 230V Batterieladegerät1x Bedienungsanleitung1x 1,5m Batterieanschlusskabel Rot/Schwarz

The Blue Smart ip22 12/30(1) charger from Victron Energy (mpn bpc123042002), is a professional, compact 12v 30a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/30(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/30(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/30(1) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/30(1) Blue Smart ip22 Charger Victron Part number: bpc123042002charges 12v lead acid, gel, agm and lithium batteries30a maximum charge current1 battery charge outputvery compact dimensions: 235 x 108 x 65mmhighly advanced seven-step charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/30(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/30(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc123042002 12/30(1) ip22 Blue Smart Charger1x instruction manual

The Blue Smart ip22 12/30(1) charger from Victron Energy (mpn bpc123042002), is a professional, compact 12v 30a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/30(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/30(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/30(1) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/30(1) Blue Smart ip22 Charger Victron Part number: bpc123042002charges 12v lead acid, gel, agm and lithium batteries30a maximum charge current1 battery charge outputvery compact dimensions: 235 x 108 x 65mmhighly advanced seven-step charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/30(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/30(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc123042002 12/30(1) ip22 Blue Smart Charger1x instruction manual

The Blue Smart ip22 12/15(3) charger from Victron Energy (mpn bpc121544002), is a professional, compact 12v 15a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/15(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/15(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/15(3) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/15(3) Blue Smart ip22 Charger Victron Part number: bpc121544002charges 12v lead-acid, gel, agm and lithium batteries15a maximum charge current3 battery charging outputsvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/15(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/15(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc121544002 12/15(3) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/15(3) charger from Victron Energy (mpn bpc121544002), is a professional, compact 12v 15a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/15(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/15(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/15(3) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/15(3) Blue Smart ip22 Charger Victron Part number: bpc121544002charges 12v lead-acid, gel, agm and lithium batteries15a maximum charge current3 battery charging outputsvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/15(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/15(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc121544002 12/15(3) ip22 Blue Smart Charger 1x instruction manual

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

The Blue Smart ip22 12/20(3) charger from Victron Energy (mpn bpc122044002), is a professional, compact 12v 20a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/20(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/20(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/20(3) charger features built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the most important technical features of the 12/20(3) Blue Smart ip22 Charger Victron Part number: bpc122044002charges 12v lead-acid, gel, agm and lithium batteries20a maximum charge current3 battery charging outputsvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/20(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/20(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc122044002 12/20(3) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/20(3) charger from Victron Energy (mpn bpc122044002), is a professional, compact 12v 20a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/20(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/20(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/20(3) charger features built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the most important technical features of the 12/20(3) Blue Smart ip22 Charger Victron Part number: bpc122044002charges 12v lead-acid, gel, agm and lithium batteries20a maximum charge current3 battery charging outputsvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/20(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/20(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc122044002 12/20(3) ip22 Blue Smart Charger 1x instruction manual

Das Blue Smart IP 67 24/5 12V 230V Akkuladegerät von Victron Energy (MPN BPC240513006) ist ein smartes, hochleistungsfähiges Batterieladegerät der neusten Generation mit 5A Ladestrom zum aufladen von 24V AGM-, Gel- und Bleisäure-Batterien so wie Lithium Ionen Akkus. Vom Funktionsumfang her ist die Blue Smart IP67 Serie bis auf wenige Funktionen identisch mit den Ladegeräten der Blue Smart IP 65 und IP 22 Geräte-Familien. Lediglich die Einsatzumgebung, für die diese Ladegeräte ausgelegt sind, unterscheidet sich.Die Blue Smart IP 67 Batterieladegeräte bieten dank integriertem Bluetooth eine Kabellose Lösung zur Überwachung von Spannung und Strom, zum Anpassen von Einstellungen und zur Aktualisierung des Ladegerätes, wenn neue Funktionen verfügbar sind.wichtige Merkmale des Blue Smart IP67 24/5 5A Batterieladegeräts Victron Teilenummer: BPC240513006Modelbezeichnung: Blue Smart IP 67 24/5max. Ladestrom: 5Afür Batteriespannung: 24V DCfür Netzspannung: 180-265 VAC 45-65 Hzvollständig ummantelt: wasserdicht, stoßgeschu¨tzt und feuerhemmendsmarte Konfiguration und Überwachung über integriertes Bluetooth und kostenlose Appadaptiver, 5-stufiger Ladealgorithmusverlängert das Leben Ihrer Batterien dank integriertem Lagermoduslässt sich zur Stromversorgung von 24V Verbrauchern einsetzenhochwertiges Gehäuse aus AluminiumgussSchutz vor Anwendungsfehlern:  Verpolung an Batterie (Sicherung), Schutz vor Übertemperatur, Schutz vor Ausgangskurzschluss vollständig ummantelt: wasserdicht, stoßgeschützt und feuerhemmendWasser, Öl oder Schmutz können das Blue Smart IP67 Ladegerät nicht beschädigen. Das Gehäuse besteht aus Aluminiumguss und die Elektronik ist mit Harz überzogen.einer der höchsten Ladewirkungsgrade aller Zeiten!Einen neuen Industriestandard setzen: Mit einer Effizienz von mindestens 92 % oder mehr produzieren diese Ladegeräte drei- bis viermal weniger Hitze.adaptiver 5-stufiger LadealgorithmusDas Blue Smart 24/5 IP67 Ladegerät zeichnet sich durch sein mikroprozessorgesteuertes, „adaptives” Batterie-Management aus. “Adaptiv“ bedeutet, dass der Ladevorgang automatisch der Art der Batterienutzung angepasst wird. "Bulk" (Konstantstromphase)"Absorption" (Konstantspannungsphase)"Recondition" (Regenerierungsphase)"Float" (Ladeerhaltungsspannungsphase)"Storage" (Lagermodus) Lagermodus: Weniger Wartung und Alterung im Ruhezustand der BatterieDer Lagermodus wird immer dann aktiviert, wenn innerhalb von 24 Stunden keine Entladung erfolgt ist. Im Lagerungs-Modus wird die Ladeerhaltungsspannung dann auf 2,2 V/Zelle (13,2 V für eine 24-V-Batterie) gesenkt, um eine Gasentwicklung und eine Korrosion an den positiven Platten zu minimieren. Einmal pro Woche wird die Spannung auf den Level der Gasungsspannung erhöht. Dadurch wird eine Art Ausgleichsladung erzielt, die die Elektrolytschichtung und die Sulfatierung - die beiden Hauptgründe für vorzeitigen Batterieausfall - verhindert.wesentliche Unterschiede zur Blue Smart IP 65 FamilieDie beiden Gerätegruppen unterscheiden sich in folgenden Punkten: die Schutzart, die IP 67 Geräte verfügen über den bestmöglichen SchutzBlue Smart IP 65 Gertäte verfügen über einen 7-stufigen Ladealgorithmus , beim IP67 ist er 5-stufig Lieferumfang1x Victron BPC240513006 Blue Smart IP67 24/5 5A 24V 230V Batterieladegerät1x Bedienungsanleitung1x 1,5m Batterieanschlusskabel Rot/Schwarz

Das Blue Smart IP 67 24/5 12V 230V Akkuladegerät von Victron Energy (MPN BPC240513006) ist ein smartes, hochleistungsfähiges Batterieladegerät der neusten Generation mit 5A Ladestrom zum aufladen von 24V AGM-, Gel- und Bleisäure-Batterien so wie Lithium Ionen Akkus. Vom Funktionsumfang her ist die Blue Smart IP67 Serie bis auf wenige Funktionen identisch mit den Ladegeräten der Blue Smart IP 65 und IP 22 Geräte-Familien. Lediglich die Einsatzumgebung, für die diese Ladegeräte ausgelegt sind, unterscheidet sich.Die Blue Smart IP 67 Batterieladegeräte bieten dank integriertem Bluetooth eine Kabellose Lösung zur Überwachung von Spannung und Strom, zum Anpassen von Einstellungen und zur Aktualisierung des Ladegerätes, wenn neue Funktionen verfügbar sind.wichtige Merkmale des Blue Smart IP67 24/5 5A Batterieladegeräts Victron Teilenummer: BPC240513006Modelbezeichnung: Blue Smart IP 67 24/5max. Ladestrom: 5Afür Batteriespannung: 24V DCfür Netzspannung: 180-265 VAC 45-65 Hzvollständig ummantelt: wasserdicht, stoßgeschützt und feuerhemmendsmarte Konfiguration und Überwachung über integriertes Bluetooth und kostenlose Appadaptiver, 5-stufiger Ladealgorithmusverlängert das Leben Ihrer Batterien dank integriertem Lagermoduslässt sich zur Stromversorgung von 24V Verbrauchern einsetzenhochwertiges Gehäuse aus AluminiumgussSchutz vor Anwendungsfehlern:  Verpolung an Batterie (Sicherung), Schutz vor Übertemperatur, Schutz vor Ausgangskurzschluss vollständig ummantelt: wasserdicht, stoßgeschützt und feuerhemmendWasser, Öl oder Schmutz können das Blue Smart IP67 Ladegerät nicht beschädigen. Das Gehäuse besteht aus Aluminiumguss und die Elektronik ist mit Harz überzogen.einer der höchsten Ladewirkungsgrade aller Zeiten!Einen neuen Industriestandard setzen: Mit einer Effizienz von mindestens 92 % oder mehr produzieren diese Ladegeräte drei- bis viermal weniger Hitze.adaptiver 5-stufiger LadealgorithmusDas Blue Smart 24/5 IP67 Ladegerät zeichnet sich durch sein mikroprozessorgesteuertes, „adaptives” Batterie-Management aus. “Adaptiv“ bedeutet, dass der Ladevorgang automatisch der Art der Batterienutzung angepasst wird. "Bulk" (Konstantstromphase)"Absorption" (Konstantspannungsphase)"Recondition" (Regenerierungsphase)"Float" (Ladeerhaltungsspannungsphase)"Storage" (Lagermodus) Lagermodus: Weniger Wartung und Alterung im Ruhezustand der BatterieDer Lagermodus wird immer dann aktiviert, wenn innerhalb von 24 Stunden keine Entladung erfolgt ist. Im Lagerungs-Modus wird die Ladeerhaltungsspannung dann auf 2,2 V/Zelle (13,2 V für eine 24-V-Batterie) gesenkt, um eine Gasentwicklung und eine Korrosion an den positiven Platten zu minimieren. Einmal pro Woche wird die Spannung auf den Level der Gasungsspannung erhöht. Dadurch wird eine Art Ausgleichsladung erzielt, die die Elektrolytschichtung und die Sulfatierung - die beiden Hauptgründe für vorzeitigen Batterieausfall - verhindert.wesentliche Unterschiede zur Blue Smart IP 65 FamilieDie beiden Gerätegruppen unterscheiden sich in folgenden Punkten: die Schutzart, die IP 67 Geräte verfügen über den bestmöglichen SchutzBlue Smart IP 65 Gertäte verfügen über einen 7-stufigen Ladealgorithmus , beim IP67 ist er 5-stufig Lieferumfang1x Victron BPC240513006 Blue Smart IP67 24/5 5A 24V 230V Batterieladegerät1x Bedienungsanleitung1x 1,5m Batterieanschlusskabel Rot/Schwarz

The Blue Smart ip22 12/30(3) charger from Victron Energy (mpn BPC123044002), is a professional, compact 12v 30a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/30(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/30(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/30(3) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/30(3) Blue Smart ip22 Charger Victron Part number: bpc123044002charges 12v lead acid, gel, agm and lithium batteries30a maximum charge current3 battery charging outputsvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/30(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/30(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy BPC123044002 12/30(3) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/30(3) charger from Victron Energy (mpn BPC123044002), is a professional, compact 12v 30a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/30(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/30(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/30(3) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/30(3) Blue Smart ip22 Charger Victron Part number: bpc123044002charges 12v lead acid, gel, agm and lithium batteries30a maximum charge current3 battery charging outputsvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/30(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/30(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy BPC123044002 12/30(3) ip22 Blue Smart Charger 1x instruction manual

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP67 charger - wirelessly monitored car batteries with Bluetooth Smart Download the VictronConnect app to your smartphone and connect to the battery charger via Bluetooth. This allows you to monitor the voltage, current and charge status wirelessly via the app and keep you fully informed. Less heat and power consumption with high charging power Compared to the industry standard, Victron Blue Smart IP67 chargers emit very little energy to the outside in the form of heat. After a full charge, the power consumption is less than 0.5 watts (W). Corrosion-resistant thanks to aluminum and resin The ingress of liquids and dust is prevented by an aluminum housing. In addition, the coating of the electronics with special industrial resin ensures optimum protection against shocks and ambient heat. In addition, the output current is automatically reduced at temperatures above fifty degrees.

Blue Smart IP67 charger - wirelessly monitored car batteries with Bluetooth Smart Download the VictronConnect app to your smartphone and connect to the battery charger via Bluetooth. This allows you to monitor the voltage, current and charge status wirelessly via the app and keep you fully informed. Less heat and power consumption with high charging power Compared to the industry standard, Victron Blue Smart IP67 chargers emit very little energy to the outside in the form of heat. After a full charge, the power consumption is less than 0.5 watts (W). Corrosion-resistant thanks to aluminum and resin The ingress of liquids and dust is prevented by an aluminum housing. In addition, the coating of the electronics with special industrial resin ensures optimum protection against shocks and ambient heat. In addition, the output current is automatically reduced at temperatures above fifty degrees.

The Blue Smart ip22 12/15(1) charger from Victron Energy (mpn bpc121542002), is a professional, compact 12v 15a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/15(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/15(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/15(1) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/15(1) Blue Smart ip22 Charger Victron Part number: bpc121542002charges 12v lead acid, gel, agm and lithium batteries15a maximum charge current1 battery charging outputvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/15(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/15(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc121542002 12/15(1) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/15(1) charger from Victron Energy (mpn bpc121542002), is a professional, compact 12v 15a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/15(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/15(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/15(1) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/15(1) Blue Smart ip22 Charger Victron Part number: bpc121542002charges 12v lead acid, gel, agm and lithium batteries15a maximum charge current1 battery charging outputvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/15(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/15(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc121542002 12/15(1) ip22 Blue Smart Charger 1x instruction manual

Das Blue Smart IP67 12/25 230V Akkuladegerät von Victron Energy (MPN: BPC122514006) ist ein intelligentes und leistungsstarkes Batterieladegerät der neuesten Generation. Mit einem Ladestrom von 25A eignet es sich hervorragend zum Aufladen von 12V AGM-, Gel- und Bleisäure-Batterien sowie Lithium-Ionen-Akkus. Der 5-stufige adaptive Ladealgorithmus sorgt automatisch für die bestmögliche Batterienutzung. Die Funktionen der Blue Smart IP67 Serie erweitern die der IP65 und IP22 Serien, um die möglichen Einsatzgebiete, da diese zudem wasserdicht und stoßgeschützt sind. Dank integriertem Bluetooth bietet dieses Ladegerät eine kabellose Lösung zur Überwachung von Spannung und Strom, zur Anpassung von Einstellungen und zur Aktualisierung des Geräts, sobald neue Funktionen verfügbar sind. Produktvorteile 95% WirkungsgradAdaptiver 5-stufiger Ladealgorithmus3 leicht wählbare LademodiTemperaturkompensationÜberhitzungsschutzGeräuschloser BetriebVollwertiger Schutz - wasserdicht, stoßgeschützt und feuerhemmendStatusanzeige via LED-AnzeigeÜberwachung mit VictronConnect-App Adaptiver 5-stufiger Ladealgorithmus Das Blue Smart Ladegerät zeichnet sich durch sein mikroprozessorgesteuertes, „adaptives” Batterie-Management aus. “Adaptiv“ bedeutet, dass der Ladevorgang automatisch der Art der Batterienutzung angepasst wird. "Bulk" (Konstantstromphase) - Die Batterie wird zuerst mit maximalem Ladestrom geladen. Sobald die konfigurierte Absorptionsspannung erreicht ist, wird der Ladevorgang optimal angepasst."Absorption" (Konstantspannungsphase) - Der Akku wird mit der konfigurierten Absorptionsspannung geladen. Dabei nimmt der Ladestrom allmählich ab, je näher die Batterie ihrer vollen Ladung kommt."Recondition" (Regenerierungsphase) - Das Ladegerät erhöht die Batteriespannung auf die konfigurierte Wiederherstellungsspannung. Dabei wird der Ausgangsstrom automatisch auf 8 % des Nennladestroms begrenzt (zum Beispiel maximal 1,2 A bei einem 15-A-Ladegerät)."Float" (Ladeerhaltungsspannungsphase) - Die Batteriespannung wird bei der eingestellten Erhaltungsspannung gehalten, um ein Entladen zu verhindern. Sobald die Float-Phase beginnt, ist die Batterie vollständig geladen und bereit für den Einsatz."Storage" (Lagermodus) - Die Batteriespannung wird auf die konfigurierte Speicherspannung eingestellt, die etwas niedriger ist als die Erhaltungsspannung. Dadurch wird die Gasbildung minimiert und die Lebensdauer des Akkus verlängert, während sie unbenutzt bleibt und kontinuierlich geladen wird. Höchster Ladewirkungsgrad aller Zeiten Das Akku-Ladegerät setzt einen neuen Maßstab in der Branche: Mit einer Effizienz von 95% erzeugt es drei- bis viermal weniger Wärme. Sobald die Batterie vollständig aufgeladen ist, sinkt der Stromverbrauch auf unter ein Watt, was fünf- bis zehnmal effizienter ist als der Industriestandard. Weitreichender Schutz mit IP67 Es ist extrem langlebig und zuverlässig, da es gegen Wasser, Öl und Schmutz geschützt ist. Mit seinem soliden Aluminiumgehäuse und der versiegelten Elektronik bietet es dir Sicherheit und Leistungsfähigkeit in jeder Situation. Überhitzungsschutz und Wiederherstellungsfunktion Das Batterieladegerät eignet sich ideal für den Einsatz in heißen Umgebungen, wie zum Beispiel in einem Maschinenraum. Bei steigenden Temperaturen bis zu 60 °C wird der Ausgangsstrom automatisch reduziert, sodass das Ladegerät zuverlässig weiterarbeitet, ohne auszufallen. Des Weiteren beginnt es den Ladevorgang selbst dann, wenn die Batterie komplett auf null Volt entladen ist. Zudem stellt es die Verbindung zu einer vollständig entladenen Lithium-Ionen-Batterie mit integrierter Trennfunktion zuverlässig wieder her. Lagermodus Dieser wird aktiviert, wenn die Batterie innerhalb von 24 Stunden nicht entladen wird. In diesem Modus wird die Ladespannung auf 2,2 V/Zelle gesenkt, um Gasbildung und Korrosion an den positiven Platten zu minimieren. Einmal pro Woche wird die Spannung kurzzeitig erhöht, um eine Ausgleichsladung durchzuführen. Dies verhindert effektiv die Elektrolytschichtung und Sulfatierung, die Hauptursachen für vorzeitigen Batterieausfall. App-Nutzung und Überwachung Das Ladegerät ist mit integriertem Bluetooth ausgestattet, was dir eine einfache und schnelle Einrichtung ermöglicht. Mit der VictronConnect-App kannst du über dein Mobiltelefon oder Tablet erweiterte Einstellungen vornehmen, deine Geräte umfassend überwachen und mühelos Firmware-Updates durchführen. Verfügbar ist ebenso eine integrierte Ladevoreinstellungen, die du bequem über die App auswählen kannst. Die adaptive Ladelogik ist ideal für gängige Batterietypen wie LiFePO4, AGM, Gel und Bleisäure geeignet. Darüber hinaus kannst du erweiterte Konfigurationen mit individuellen benutzerdefinierten Einstellungen vornehmen. Technische Daten Nennspannungsbereich und Frequenz: 220-240 VAC / 50-60 HzEingangsspannungsbereich und Frequenz: 180-265 VAC / 45-65 HzWirkungsgrad: 95 %Stromverbrauch ohne Last: 0,5 WLadestrom, Normalmodus: 25 ALadestrom, LOW: 10 AKühlung: Natürliche KonvektionBetriebstemperaturbereich: -20°C - +60°CSchutzklasse: IP67Gewicht: 2,4 kgAbmessungen: 99 x 219 x 65 mm Lieferumfang 1x Victron Blue Smart IP67 Ladegerät1x 1,5m Netzkabel für Stromanschluss1x 1,5m Batterieanschlusskabel

Das Blue Smart IP67 12/25 230V Akkuladegerät von Victron Energy (MPN: BPC122514006) ist ein intelligentes und leistungsstarkes Batterieladegerät der neuesten Generation. Mit einem Ladestrom von 25A eignet es sich hervorragend zum Aufladen von 12V AGM-, Gel- und Bleisäure-Batterien sowie Lithium-Ionen-Akkus. Der 5-stufige adaptive Ladealgorithmus sorgt automatisch für die bestmögliche Batterienutzung. Die Funktionen der Blue Smart IP67 Serie erweitern die der IP65 und IP22 Serien, um die möglichen Einsatzgebiete, da diese zudem wasserdicht und stoßgeschützt sind. Dank integriertem Bluetooth bietet dieses Ladegerät eine kabellose Lösung zur Überwachung von Spannung und Strom, zur Anpassung von Einstellungen und zur Aktualisierung des Geräts, sobald neue Funktionen verfügbar sind. Produktvorteile 95% WirkungsgradAdaptiver 5-stufiger Ladealgorithmus3 leicht wählbare LademodiTemperaturkompensationÜberhitzungsschutzGeräuschloser BetriebVollwertiger Schutz - wasserdicht, stoßgeschützt und feuerhemmendStatusanzeige via LED-AnzeigeÜberwachung mit VictronConnect-App Adaptiver 5-stufiger Ladealgorithmus Das Blue Smart Ladegerät zeichnet sich durch sein mikroprozessorgesteuertes, „adaptives” Batterie-Management aus. “Adaptiv“ bedeutet, dass der Ladevorgang automatisch der Art der Batterienutzung angepasst wird. "Bulk" (Konstantstromphase) - Die Batterie wird zuerst mit maximalem Ladestrom geladen. Sobald die konfigurierte Absorptionsspannung erreicht ist, wird der Ladevorgang optimal angepasst."Absorption" (Konstantspannungsphase) - Der Akku wird mit der konfigurierten Absorptionsspannung geladen. Dabei nimmt der Ladestrom allmählich ab, je näher die Batterie ihrer vollen Ladung kommt."Recondition" (Regenerierungsphase) - Das Ladegerät erhöht die Batteriespannung auf die konfigurierte Wiederherstellungsspannung. Dabei wird der Ausgangsstrom automatisch auf 8 % des Nennladestroms begrenzt (zum Beispiel maximal 1,2 A bei einem 15-A-Ladegerät)."Float" (Ladeerhaltungsspannungsphase) - Die Batteriespannung wird bei der eingestellten Erhaltungsspannung gehalten, um ein Entladen zu verhindern. Sobald die Float-Phase beginnt, ist die Batterie vollständig geladen und bereit für den Einsatz."Storage" (Lagermodus) - Die Batteriespannung wird auf die konfigurierte Speicherspannung eingestellt, die etwas niedriger ist als die Erhaltungsspannung. Dadurch wird die Gasbildung minimiert und die Lebensdauer des Akkus verlängert, während sie unbenutzt bleibt und kontinuierlich geladen wird. Höchster Ladewirkungsgrad aller Zeiten Das Akku-Ladegerät setzt einen neuen Maßstab in der Branche: Mit einer Effizienz von 95% erzeugt es drei- bis viermal weniger Wärme. Sobald die Batterie vollständig aufgeladen ist, sinkt der Stromverbrauch auf unter ein Watt, was fünf- bis zehnmal effizienter ist als der Industriestandard. Weitreichender Schutz mit IP67 Es ist extrem langlebig und zuverlässig, da es gegen Wasser, Öl und Schmutz geschützt ist. Mit seinem soliden Aluminiumgehäuse und der versiegelten Elektronik bietet es dir Sicherheit und Leistungsfähigkeit in jeder Situation. Überhitzungsschutz und Wiederherstellungsfunktion Das Batterieladegerät eignet sich ideal für den Einsatz in heißen Umgebungen, wie zum Beispiel in einem Maschinenraum. Bei steigenden Temperaturen bis zu 60 °C wird der Ausgangsstrom automatisch reduziert, sodass das Ladegerät zuverlässig weiterarbeitet, ohne auszufallen. Des Weiteren beginnt es den Ladevorgang selbst dann, wenn die Batterie komplett auf null Volt entladen ist. Zudem stellt es die Verbindung zu einer vollständig entladenen Lithium-Ionen-Batterie mit integrierter Trennfunktion zuverlässig wieder her. Lagermodus Dieser wird aktiviert, wenn die Batterie innerhalb von 24 Stunden nicht entladen wird. In diesem Modus wird die Ladespannung auf 2,2 V/Zelle gesenkt, um Gasbildung und Korrosion an den positiven Platten zu minimieren. Einmal pro Woche wird die Spannung kurzzeitig erhöht, um eine Ausgleichsladung durchzuführen. Dies verhindert effektiv die Elektrolytschichtung und Sulfatierung, die Hauptursachen für vorzeitigen Batterieausfall. App-Nutzung und Überwachung Das Ladegerät ist mit integriertem Bluetooth ausgestattet, was dir eine einfache und schnelle Einrichtung ermöglicht. Mit der VictronConnect-App kannst du über dein Mobiltelefon oder Tablet erweiterte Einstellungen vornehmen, deine Geräte umfassend überwachen und mühelos Firmware-Updates durchführen. Verfügbar ist ebenso eine integrierte Ladevoreinstellungen, die du bequem über die App auswählen kannst. Die adaptive Ladelogik ist ideal für gängige Batterietypen wie LiFePO4, AGM, Gel und Bleisäure geeignet. Darüber hinaus kannst du erweiterte Konfigurationen mit individuellen benutzerdefinierten Einstellungen vornehmen. Technische Daten Nennspannungsbereich und Frequenz: 220-240 VAC / 50-60 HzEingangsspannungsbereich und Frequenz: 180-265 VAC / 45-65 HzWirkungsgrad: 95 %Stromverbrauch ohne Last: 0,5 WLadestrom, Normalmodus: 25 ALadestrom, LOW: 10 AKühlung: Natürliche KonvektionBetriebstemperaturbereich: -20°C - +60°CSchutzklasse: IP67Gewicht: 2,4 kgAbmessungen: 99 x 219 x 65 mm Lieferumfang 1x Victron Blue Smart IP67 Ladegerät1x 1,5m Netzkabel für Stromanschluss1x 1,5m Batterieanschlusskabel