About the ARK 2.5L-A2 battery: Modular, stackable battery conceptCobalt-free lithium iron phosphate (LFP)Wall or floor installation possibleHigh cycle resistance and long service lifeSoft start to protect the system from overvoltagesRemote diagnostics and firmware updateIP65 rating for outdoor installation10 years warranty The ARK battery system The modular concept makes the ARK system flexible and expandable if necessary. A battery tower can be constructed with at least two and up to ten storage modules. A connecting cable set is required to connect to the inverter. For ground installation, an additional battery base per tower is required. The ARK-LV memories are compatible with the single-phase SPH inverter series and the SPF3500 off-grid inverter. Areas of application For grid-connected and self-sufficient photovoltaic systemsEmergency power supplyUninterruptible power supplies (UPS) Flexible Expand Growatt's ARK battery system offers high flexibility through its expandable configuration options, ranging from 2.56 kWh to 25.6 kWh. The installation and extension of the system is simple and straightforward thanks to the modular design and the use of cables. Another innovation of the ARK system is that, unlike other battery systems, no battery cabinet is required. Only a battery socket is required for a stable stand. Soft start to protect the system The soft start mechanism is a protective function used on the growatt battery to protect the system from overvoltages. When the battery is started or turned on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. In this way, smooth and safe operation of the battery system is ensured. Integrated BMS The Growatt ARK low-voltage battery's Battery Management System (BMS) monitors a number of key parameters to ensure efficient and safe battery performance. It monitors the battery state of charge (SOC), mains voltage, current flow, cell voltage, and cell and PCBA temperatures. By precisely controlling these parameters, the BMS ensures optimal battery utilization, protects against potential damage, and extends battery life. High cycle life The Growatt ARK battery modules are an ideal storage solution for photovoltaic systems due to their extremely high cycle life and the use of LiFePo4 cells. Whether it is a grid-based or an island system, growatt storage offers numerous advantages compared to conventional lead-acid batteries and other lithium technologies. Technical data: Battery type: Cobalt-free lithium iron phosphate (LiFePo4)Energy capacity: 2.56 kWh/50AhUsable capacity: 2.3 kWh/45AhRated voltage: 51.2 VOperating voltage range: 47.2-56.8 VCharging/discharging current: 25AProtection class: IP65Operating temperature range: -10°C - +50°CDimensions: 650 x 260 x 185 mmWeight: 28 kgCertificates: IEC62619, CE, CEC, RCM, UN38.3 Scope of delivery: 1x Growatt ARK 2.5L-A2 2.56 kWh low-voltage battery1x battery connection set

Growatt HVC 60050-A1 high-voltage battery management system for your energy storage solution. CompatibilityThe BMS is required to operate the ARK 2.5 High Voltage batteries. It can be used together with all 3-phase Growatt hybrid inverters of the SPH and SPA series. (SPH4000TL3 BH up to and including SPH10000TL3 BH and Growatt SPA4000TL3 BH - SPA10000TL3 BH) Smart High Voltage Battery Management System (dynamic control of charging power and protection against overloading the home network)Compatible with the ARK battery seriesFlexible capacity options, 5.12kWh to 25.62kWhEasy installationModular designLong service lifeMaximum protection for your home system thanks to integrated protection functions for your battery system (overvoltage, undervoltage, overload, short-circuit and overtemperature protection)Indoor useReliable and durable BMSEasy integration into existing and newly installed PV systemsSeamless integration into the entire Growatt Home ecosystemRemote firmware upgrade Warranty: 10-year Growatt warranty (see warranty document in Downloads) Scope of delivery The Growatt HVC 60050-A1 High Voltage Battery Management System.

The NOAH2000 from Growatt (MPN: NOAH2000) is a LiFePO4 battery storage system for your balcony power station and impresses with its high cycle stability and self-heating function, among other things. With a nominal voltage of 51.2 V and a capacity of 2048 Wh, the battery provides you with outstanding performance under high loads. If required, you can flexibly expand the system to a total of up to 8192 Wh. Thanks to the advanced self-heating technology, the battery module also continues to work without any problems in winter environments at sub-zero temperatures. Of course, you can view and control everything in real time using the system monitoring app (ShinePhone). You can connect up to 4 solar modules with a maximum total output of 1800 W directly to the storage system. The storage system can be completed with the matching NEO 800M-X micro inverter. The NOAH2000 at a glance Self-heating functionCycles: 6000+Up to 4 battery modules (total 8192Wh)Up to 4 solar modules (total 1800W)App use - Growatt monitoring platformPlug and playModular and flexibleQuick and easy installation in 5 minutesManufacturer's warranty: 10 yearsCertifications: CE, ROHS, REACH Flexible expansion The NOAH2000 offers a high degree of flexibility thanks to its expandable configuration options, which range from 2048Wh to 8192Wh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Long cycle life The NOAH battery module is an ideal storage solution for your photovoltaic system due to its extremely long cycle life and the use of LiFePo4 cells. The Growatt storage system offers numerous advantages compared to conventional lead batteries and other lithium technologies. Ready for use within a few minutes The storage system uses the NEO 800M-X inverter and is compatible with MC4 connectors. Installation is very easy thanks to the plug-and-play principle. All you have to do is attach the micro inverter to the wall and connect the battery via a connection cable. You can connect up to 4 solar modules of up to 450W each with a total output of 1800W to one module using 2-way Y-connectors. The inputs are located directly on the NOAH2000. Use energy, reduce costs The system stores excess energy in the battery during the day and then makes it available whenever you need it to increase the efficiency of solar power use. Working modes Load First: Solar energy supplies the connected loads with top priority Battery First: Solar charging has top priority for the battery Technical data Battery type: LiFePO4Capacity: 2048 WhMax. Capacity: 8192 Wh (4 battery modules)Max. Charging power: 2000 WNominal voltage: 51.2 VMax. Charging current: 40 AMPPT efficiency: 99%Charging temperature range: 0 - +45°CDischarging temperature: -20 - +45°CProtection class: IP66Weight: 23 kgDimensions: 406 x 235 x 270 mm PV input Recommended PV input power: Max. 2 x 900 WMax. PV input voltage: 60 VMPPT voltage range: 16-60 VMPPT full power voltage range: 30-48 VMax. Input current: 26 A + 26 AMPP tracker: 2Strings per MPP tracker: 1 Battery output (DC to micro inverter) Max. Output power: 800 WOutput voltage range: 40-50 VMax. Output current: 20 A Scope of delivery: 1x Growatt NOAH2000 LiFePO4 battery module 2048Wh 4x extension cable for PV input 3m 2x DC output cable 3m 2x cable fuse 1x mounting bracket 1x MC4 mounting tool

Growatt BDC 95045-A1 high-voltage battery management system for your energy storage solution.CompatibilityGrowatt BDC 95045-A1 High Voltage Battery Management System is designed for the ARK 2.5H-A1 High Voltage battery units.It is also suitable for communication with the following hybrid inverters from the Growatt MIN-XH and MOD-XH series: MIN2500-6000 TL-XH, MOD3000-10000 TL3-XHSmart High Voltage Battery Management System (dynamic control of charging power and protection against overloading the home network)Compatible with the ARK seriesFlexible capacity options, 5.12kWh to 25.62kWhEasy installationModular designLong service lifeMaximum protection for your home system thanks to integrated protection functions for your battery system (overvoltage, undervoltage, overload, short-circuit and overtemperature protection)Indoor useReliable and durable BMSEasy integration into existing and newly installed PV systemsSeamless integration into the entire Growatt Home ecosystemRemote firmware upgradeWarranty:10-year Growatt warranty (see warranty document in Downloads)Scope of deliveryThe Growatt BDC 95045-A1 High Voltage Battery Management System

Die Growatt ARK 2,5H-A2 Hochvolt Batterie (MPN ARK-2.5H-A2) ist ein LiFePO4-Speicher mit hoher Zyklenfestigkeit und langer Lebensdauer. Das modulare, stapelbare Konzept ermöglicht eine flexible Anwendung für verschiedene Szenarien und ist leicht zu installieren. Die Batterie bietet hervorragende Leistungen bei hoher Belastung und ist mit seinem IP65-Schutz auch für die Installation im Freien geeignet. Um Überspannungen im System zu vermeiden, kommt der Softstart zum Einsatz. Die A2-Version ist der Nachfolger der bisherigen ARK 2,5H-A1 und kann auch mit dieser problemlos kombiniert werden. Über die ARK 2,5H-A2-Batterie: Modulares, stapelbares BatteriekonzeptKobaltfreies Lithium-Eisenphosphat (LFP)Hohe Zyklenfestigkeit und lange LebensdauerWand- oder Bodeninstallation möglichSoftstart zum Schutz des Systems vor ÜberspannungenAutomatisches Aufwachen bei UnterspannungSchutzart IP65 für die Installation im FreienFerndiagnose und Firmware-Update Das ARK-Batteriesystem - Version A1 und A2 kombinierbar Durch das modulare Konzept ist das ARK-System flexibel einsetzbar und bei Bedarf erweiterbar. Ein Batterieturm kann mit mindestens 2 und bis zu 10 Speichermodule errichtet werden, es können auch mehrere Türme in einem System installiert werden. Hierbei kannst du die neue A2 mit der alten A1-Version problemlos kombinieren. Zum Betrieb wird pro Turm ein BMS-Steuerungselement, sowie ein Verbindungskabelset zum entsprechenden Wechselrichter benötigt. Zur Bodeninstallation ist zusätzlich eine Batterie-Basis pro Turm nötig. Die ARK-Hochvolt-Speicher sind mit den MIN- und MOD-XH, sowie den dreiphasigen SPH- und SPA-Wechselrichtern kompatibel. Je nach Inverter-Serie wird eine andere Steuerungseinheit, ein anderes Verbindungskabelset und eine unterschiedliche Startanzahl der Batterien benötigt. Das ARK-XH-System beginnt mit 2, das ARK-HV-System wiederum mit 3 Batterien. Einsatzgebiete Für netzgebundene, sowie autarke PhotovoltaikanlagenNotstromversorgungUnterbrechungsfreie Stromversorgungen (USV / UPS) Flexibel Erweitern Das ARK Batteriesystem von Growatt bietet eine hohe Flexibilität durch seine erweiterbaren Konfigurationsmöglichkeiten, die von 5,12 kWh bis zu 25,6 kWh reichen. Die Installation und Erweiterung des Systems gestaltet sich einfach und unkompliziert durch das modulare Design und die Verwendung von Kabeln. Eine weitere Innovation des ARK Systems ist, dass im Gegensatz zu anderen Batteriesystemen kein Batterieschrank benötigt wird. Lediglich eine Batteriebasis ist für einen stabilen Stand erforderlich. Softstart zum Schutz des Systems Der Softstart-Mechanismus ist eine Schutzfunktion, die bei der Growatt-Batterie zum Einsatz kommt, um das System vor Überspannungen zu schützen. Beim Starten oder Einschalten der Batterie wird die Stromversorgung allmählich erhöht, um das System vor Schäden zu bewahren, die durch eine plötzliche Spannungsspitze verursacht werden könnten. Auf diese Weise wird ein reibungsloser und sicherer Betrieb des Batteriesystems gewährleistet. Hohe Zyklen-Lebensdauer Die Growatt ARK Batteriemodule sind aufgrund ihrer extrem hohen Zyklen-Lebensdauer und der Verwendung von LiFePo4-Zellen eine ideale Speicherlösung für Photovoltaikanlagen. Unabhängig davon, ob es sich um ein netzgeführtes oder ein Inselsystem handelt, bietet der Growatt Speicher im Vergleich zu herkömmlichen Bleibatterien und anderen Lithium-Technologien zahlreiche Vorteile. Technische Daten: Batterie-Typ: Kobaltfreies Lithium-Eisenphosphat (LiFePo4)Energiekapazität: 2,56 kWhNutzbare Kapazität: 2,3 kWhNennspannung: 51,2 VBetriebsspannungsbereich: 47,2-56,8 VLade-/Entladestrom: 25 A/0,5 CSchutzart: IP65Temperaturbereich: -10~50° CAbmessung: 650 x 260 x 180 mmGewicht: ca. 28 kgZertifikate: IEC62619, CE, CEC, RCM, UN38.3 Lieferumfang: 1x Growatt ARK 2,5H-A2 2,56 kWh Hochvoltbatterie1x Batterieverbindungsset

The new GrowattAPX98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. What is important is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature The APX battery system Thanks to its modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be set up with a minimum of one to a maximum of 6 storage modules. One power module per tower is required for operation. This must be purchased separately. An additional base is required for ground mounting. Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15 kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Scope of delivery: 1x Growatt APX 98034-P2 BMS

The modular concept of the Growatt APX battery system enables a wide range of applications and flexible expansion as required. Between 1 and 6 high-voltage batteries can be installed within a battery tower. The battery module is a high-voltage battery that features the latest LiFePO4 technology and boasts a nominal energy of 5kWh. The body also includes a battery management system of the latest generation, which protects the battery modules from adverse conditions, and a battery base that ensures a secure stand during ground installation. As an option, a back-up box can be added for emergency power generation. It is able to provide up to 10kWh from the solar storage system in the event of a power failure. The APX battery system contains: APX 5.0P-B1 high-voltage battery 5kWh LiFePO4 (1-6x depending on selection)APX 98034-P2 BMS power moduleAPX battery base High-voltage batteryOptional: SYN 50 XH 30 Back-Up Box emergency backup power The APX battery system demonstrates its flexible configuration options. These can be extended from 5kWh to 30kWh. The simple design makes installation and expansion very straightforward with the aid of cables. A further advance of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only the corresponding battery base is required for a secure stand. The APX series supports the combination of mixed battery packs from new and old batches, as well as different capacities. APX 5.0P-B1 high-voltage battery The APX 5.0P-B1 battery module from Growatt is a high-voltage battery with proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. In addition, the modular energy optimization ensures that the system fully utilizes the energy of each battery. In order to achieve a very flexible system application, old and new battery batches as well as batteries with different capacities can be mixed and connected. Soft start is used to avoid overvoltage in the system. The APX high-voltage battery: Flexible capacity options up to 30kWhCobalt-free LiFePO4 storage technology90% depth of discharge (DoD)Active protection at BMS levelIntegrated modular energy optimizationSupports the combination of new and old battery modules in one systemSoft start to avoid overvoltages in the systemModular and stackable designEasy installation10-year manufacturer's warranty Long cycle life The APX battery system is based on LiFePO4 chemistry without cobalt and offers a four-stage protection mechanism through a battery management system (BMS), modular energy optimization, a fuse and aerosol. This ensures increased safety, reliability and a long service life. The modular energy optimization ensures that the system fully utilizes the energy of each individual battery. Regardless of whether the solar system is grid-connected or stand-alone, Growatt storage offers several advantages over typical lead-acid batteries and other lithium technologies. Soft start to protect the system The soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system. Technical data: Battery type: Lithium iron phosphate (LiFePo4)Nominal voltage: 385VNominal energy: 5kWhOperating voltage range: 330-450VWeight: 50kgDimensions: 690 x 185 x 295 mmProtection class: IP66Ambient temperature: -10°C - +50°CCooling: Natural convectionWarranty: 10 year manufacturer's warranty Battery management system The new Growatt APX 98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. The important thing is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Battery base The Growatt APX Battery Base is suitable for the ground installation of Growatt APX battery modules and the associated BMS. It ensures that the battery tower stands securely. The Growatt APX system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. for floor mounting of Growatt APX batteries and associated BMSOne base per battery towerDimensions: 690 x 185 x 50 mm SYN 50-XH-30 Back-UP Box The SYN 50-XH-30 from Growatt is a back-up box that acts as an emergency backup power supply for the home. It is able to provide up to 10kW from the solar storage system in the event of a power failure. The switchover time is 0.5 seconds. The Back-Up Box is characterized by its user-friendly design, which makes it easy to install and operate. The SYN Back-Up Box: Backup power supply for the entire house, up to 10 kW100% 3-phase asymmetrical outputIntegrated switchEasy to installCombination options with the entire Growatt MOD-XH BP series Technical data: Max. Overcurrent protection AC input: 63 AMax. Continuous input current: 50 AAC output voltage: 230 V/400 VAC output voltage range: 180-280 VAC frequency: 50/60 HzAC frequency range: 45-65 HzAC rated power: 18 kWMax. continuous input current at 230 V: 26.1 APeak AC power in backup mode: 19.8k WAC peak current in backup mode: 28.7 ACommunication: RS485Operating temperature range: -40°C - +60°CProtection class: IP65Weight: 10.8 kgDimensions: 365 x 450 x 123 mm Compatible inverters The following hybrid inverters are intended for the storage system: MOD 3KTL3-XH BPMOD 4KTL3-XH BP MOD 5KTL3-XH BP MOD6KTL3-XH BPMOD 7KTL3-XH BP MOD 8KTL3-XH BP MOD 9KTL3-XH BP MOD 10KTL3-XH BP

The new GrowattAPX98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. What is important is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature The APX battery system Thanks to its modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be set up with a minimum of one to a maximum of 6 storage modules. One power module per tower is required for operation. This must be purchased separately. An additional base is required for ground mounting. Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15 kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Scope of delivery: 1x Growatt APX 98034-P2 BMS

The NOAH2000 from Growatt (MPN: NOAH2000) is a LiFePO4 battery storage system for your balcony power station and impresses with its high cycle stability and self-heating function, among other things. With a nominal voltage of 51.2 V and a capacity of 2048 Wh, the battery provides you with outstanding performance under high loads. If required, you can flexibly expand the system to a total of up to 8192 Wh. Thanks to the advanced self-heating technology, the battery module also continues to work without any problems in winter environments at sub-zero temperatures. Of course, you can view and control everything in real time using the system monitoring app (ShinePhone). You can connect up to 4 solar modules with a maximum total output of 1800 W directly to the storage system. The storage system can be completed with the matching NEO 800M-X micro inverter. The NOAH2000 at a glance Self-heating functionCycles: 6000+Up to 4 battery modules (total 8192Wh)Up to 4 solar modules (total 1800W)App use - Growatt monitoring platformPlug and playModular and flexibleQuick and easy installation in 5 minutesManufacturer's warranty: 10 yearsCertifications: CE, ROHS, REACH Flexible expansion The NOAH2000 offers a high degree of flexibility thanks to its expandable configuration options, which range from 2048Wh to 8192Wh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Long cycle life The NOAH battery module is an ideal storage solution for your photovoltaic system due to its extremely long cycle life and the use of LiFePo4 cells. The Growatt storage system offers numerous advantages compared to conventional lead batteries and other lithium technologies. Ready for use within a few minutes The storage system uses the NEO 800M-X inverter and is compatible with MC4 connectors. Installation is very easy thanks to the plug-and-play principle. All you have to do is attach the micro inverter to the wall and connect the battery via a connection cable. You can connect up to 4 solar modules of up to 450W each with a total output of 1800W to one module using 2-way Y-connectors. The inputs are located directly on the NOAH2000. Use energy, reduce costs The system stores excess energy in the battery during the day and then makes it available whenever you need it to increase the efficiency of solar power use. Working modes Load First: Solar energy supplies the connected loads with top priority Battery First: Solar charging has top priority for the battery Technical data Battery type: LiFePO4Capacity: 2048 WhMax. Capacity: 8192 Wh (4 battery modules)Max. Charging power: 2000 WNominal voltage: 51.2 VMax. Charging current: 40 AMPPT efficiency: 99%Charging temperature range: 0 - +45°CDischarging temperature: -20 - +45°CProtection class: IP66Weight: 23 kgDimensions: 406 x 235 x 270 mm PV input Recommended PV input power: Max. 2 x 900 WMax. PV input voltage: 60 VMPPT voltage range: 16-60 VMPPT full power voltage range: 30-48 VMax. Input current: 26 A + 26 AMPP tracker: 2Strings per MPP tracker: 1 Battery output (DC to micro inverter) Max. Output power: 800 WOutput voltage range: 40-50 VMax. Output current: 20 A Scope of delivery: 1x Growatt NOAH2000 LiFePO4 battery module 2048Wh 4x extension cable for PV input 3m 2x DC output cable 3m 2x cable fuse 1x mounting bracket 1x MC4 mounting tool

The new GrowattAPX98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. What is important is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature The APX battery system Thanks to its modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be set up with a minimum of one to a maximum of 6 storage modules. One power module per tower is required for operation. This must be purchased separately. An additional base is required for ground mounting. Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15 kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Scope of delivery: 1x Growatt APX 98034-P2 BMS

The ARK high-voltage storage system from Growatt can be used flexibly thanks to its modular concept and can be expanded as required. A battery tower can be set up with a minimum of 3 to a maximum of 10 ARK high-voltage batteries. A BMS control unit and a connection cable set are included for commissioning with a compatible inverter. The battery base is also available as an option for ground installation. The Growatt high-voltage battery system contains: ARK 2.5H-A1 high-voltage battery LiFePO4 2.56kWh (3-10x depending on selection)HVC 60050-A1 ARK BMS control unitConnection cable set ARK battery to inverterOptional: Battery base ground installation Compatible inverters Growatt SPH BU-UPGrowatt SPA BHSPH 4000TL3 BH-UP 4kW Hybrid inverter 3-phaseSPA 4000TL3 BH-UP 4kW 3-phase string inverterSPH 5000TL3 BH-UP 5kW Hybrid Inverter 3-phaseSPA 5000TL3 BH-UP 5kW 3-phase string inverterSPH 6000TL3 BH-UP 6kW Hybrid Inverter 3-phaseSPA 6000TL3 BH-UP 6kW 3-phase string inverterSPH 7000TL3 BH-UP 7kW Hybrid Inverter 3-phaseSPA 7000TL3 BH-UP 7kW 3-phase string inverterSPH 8000TL3 BH-UP 8kW Hybrid Inverter 3-phaseSPA 8000TL3 BH-UP 8kW 3-phase string inverterSPH 10000TL3 BH-UP 10kW Hybrid Inverter 3-phaseSPA 10000TL3 BH-UP 10kW 3-phase string inverter ARK 2.5H-A1 high-voltage battery The Growatt ARK 2.5H-A1 high-voltage battery (MPN ARK-2.5H-A1) is a LiFePO4 storage system with high cycle stability and a long service life. The modular, stackable concept enables flexible application for different scenarios and is easy to install. The battery offers excellent performance under high loads and is also suitable for outdoor installation with its IP65 protection. The soft start is used to prevent overvoltage in the system. About the ARK 2.5H-A1 battery: Modular, stackable battery conceptCobalt-free lithium iron phosphate (LFP)High cycle stability and long service lifeWall or floor installation possibleSoft start to protect the system from overvoltageAutomatic wake-up in the event of undervoltageIP65 protection class for outdoor installationRemote diagnosis and firmware update Areas of application For grid-connected and stand-alone photovoltaic systemsEmergency power supplyUninterruptible power supplies (UPS) Soft start to protect the system The soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system. Long cycle life The Growatt ARK battery modules are an ideal storage solution for photovoltaic systems due to their extremely long cycle life and the use of LiFePo4 cells. Regardless of whether it is a grid-connected or off-grid system, the Growatt storage system offers numerous advantages compared to conventional lead batteries and other lithium technologies. Technical data for 1 battery module each: Battery type: Cobalt-free lithium iron phosphate (LiFePo4)Energy capacity: 2.56 kWhUsable capacity: 2.3 kWhNominal voltage: 51.2 VOperating voltage range: 47.2-56.8 VCharge/discharge current: 25 A/0.5 CProtection class: IP65Temperature range: -10~50° CDimensions: 650 x 260 x 180 mmWeight: approx. 28 kg10-year manufacturer's warrantyCertificates: IEC62619, CE, CEC, RCM, UN38.3 BMS control unit The Growatt HVC-60050-A1 BMS is a central monitoring and control unit that is part of the ARK HV high-voltage battery system and supports communication with the Growatt SPA and SPH inverters. Up to 10 battery modules, each with a capacity of 2.56 kWh, can be connected to this BMS. These modules can be connected in series to form a battery tower offering a total capacity of up to 25.64 kWh. Storage towers can also be connected together, requiring one BMS per tower. About the HVC 60050-A1 BMS Compatible with Growatt SPA and SPH invertersModular, stackable battery conceptMonitoring and control BMS control parameters Control parameters include state of charge (SOC), grid voltage, current, cell voltage, cell temperature and PCBA temperature measurement. By precisely monitoring these parameters, the BMS ensures optimum battery performance and longevity. Flexible expansion The ARK battery system from Growatt offers a high degree of flexibility thanks to its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Another innovation of the ARK system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand. Technical data: Input/output voltage range: 90~585VRated current: 25AProtection class: IP65Temperature range: -10~50° CDimension: 650 x 260 x 185 mmCommunication: CANWeight: 8.5 kg Connection cable set for inverter The Growatt battery cable set is required to connect Growatt ARK2.5H-A1 batteries to inverters of the three-phase SPH or SPA series. 2x 2m power cable (plus/minus)2m communication cable ARK battery base The Growatt ARK battery base is suitable for the ground installation of Growatt ARK battery modules and ensures that the battery tower stands securely. The Growatt ARK system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. for floor mounting of Growatt ARK HV and XH batteriesone base per battery towerWeight: 3kg

The ARK high-voltage storage system from Growatt can be used flexibly thanks to its modular concept and can be expanded as required. A battery tower can be set up with a minimum of 2 to a maximum of 10 ARK high-voltage batteries. A BMS control unit and a connection cable set are included for commissioning with a compatible inverter. The battery base is also available as an option for ground installation. The Growatt high-voltage battery system contains: ARK 2.5H-A1 high-voltage battery LiFePO4 2.56kWh (2-10x depending on selection)BDC 95045-A1 BMS control unitConnection cable set ARK battery to inverterOptional: Battery base ground installation Compatible inverters Growatt MIN-XHGrowatt MOD-XHMIN 2500TL-XH Hybrid inverter PV 2500W 1-phaseMOD 4KTL3-XH 4kW hybrid inverter 3-phaseMIN 3000TL-XH Hybrid inverter PV 3000W 1-phaseMOD 5KTL3-XH 5kW hybrid inverter 3-phaseMIN 3600TL-XH Hybrid inverter PV 3600W 1-phaseMOD 7KTL3-XH 7kW hybrid inverter 3-phaseMIN 4200TL-XH Hybrid inverter PV 4200W 1-phaseMOD 9KTL3-XH 9kW hybrid inverter 3-phaseMIN 4600TL-XH Hybrid inverter PV 4600W 1-phaseMOD 10KTL3-XH 10kW hybrid inverter 3-phase ARK 2.5H-A1 high-voltage battery The Growatt ARK 2.5H-A1 high-voltage battery (MPN ARK-2.5H-A1) is a LiFePO4 storage system with high cycle stability and a long service life. The modular, stackable concept enables flexible application for different scenarios and is easy to install. The battery offers excellent performance under high loads and is also suitable for outdoor installation with its IP65 protection. The soft start is used to prevent overvoltage in the system. About the ARK 2.5H-A1 battery: Modular, stackable battery conceptCobalt-free lithium iron phosphate (LFP)High cycle stability and long service lifeWall or floor installation possibleSoft start to protect the system from overvoltageAutomatic wake-up in the event of undervoltageIP65 protection class for outdoor installationRemote diagnosis and firmware update Areas of application For grid-connected and stand-alone photovoltaic systemsEmergency power supplyUninterruptible power supplies (UPS) Soft start to protect the system The soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system. Long cycle life The Growatt ARK battery modules are an ideal storage solution for photovoltaic systems due to their extremely long cycle life and the use of LiFePo4 cells. Regardless of whether it is a grid-connected or off-grid system, the Growatt storage system offers numerous advantages compared to conventional lead batteries and other lithium technologies. Technical data: Battery type: Cobalt-free lithium iron phosphate (LiFePo4)Energy capacity: 2.56 kWhUsable capacity: 2.3 kWhNominal voltage: 51.2 VOperating voltage range: 47.2-56.8 VCharge/discharge current: 25 A/0.5 CProtection class: IP65Temperature range: -10~50° CDimensions: 650 x 260 x 180 mmWeight: approx. 28 kg10-year manufacturer's warrantyCertificates: IEC62619, CE, CEC, RCM, UN38.3 BMS control unit The Growatt BDC 95045-A1 BMS acts as a central monitoring and control unit within the ARK high-voltage battery system and supports communication with the Growatt MIN and MOD-XH inverters. It enables the connection of up to 10 battery modules with an individual capacity of 2.56 kWh. These modules can be connected in series to form a battery tower with a total capacity of up to 25.64 kWh. Storage towers can also be connected together, with one BMS required per tower. About the BDC 95045-A1 BMS Compatible with Growatt MIN-XH and MOD-XH invertersModular, stackable battery conceptMonitoring and control BMS control parameters The control parameters include the state of charge (SOC), the mains voltage, the current, the cell voltage, the cell temperature and the PCBA temperature measurement. By precisely monitoring these parameters, the BMS ensures optimum battery performance and longevity. Flexible expansion The ARK battery system from Growatt offers a high degree of flexibility thanks to its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Another innovation of the ARK system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand. Technical data Protection class: IP65Temperature range: -10~50° CDimensions: 650 x 260 x 185 mmCommunication: CANWeight: 8 kg10-year manufacturer's warranty Connection cable set for inverter The Growatt battery cable set is required to connect Growatt ARK2.5H-A1 batteries to inverters of the MIN or MOD-XH series. 2x 2m power cable (plus/minus)2m communication cable2m earthing cable ARK battery base The Growatt ARK battery base is suitable for the ground installation of Growatt ARK battery modules and ensures that the battery tower stands securely. The Growatt ARK system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. for floor mounting of Growatt ARK HV and XH batteriesone base per battery towerWeight: 3kg

Growatt BDC 95045-A1 high-voltage battery management system for your energy storage solution.CompatibilityGrowatt BDC 95045-A1 High Voltage Battery Management System is designed for the ARK 2.5H-A1 High Voltage battery units.It is also suitable for communication with the following hybrid inverters from the Growatt MIN-XH and MOD-XH series: MIN2500-6000 TL-XH, MOD3000-10000 TL3-XHSmart High Voltage Battery Management System (dynamic control of charging power and protection against overloading the home network)Compatible with the ARK seriesFlexible capacity options, 5.12kWh to 25.62kWhEasy installationModular designLong service lifeMaximum protection for your home system thanks to integrated protection functions for your battery system (overvoltage, undervoltage, overload, short-circuit and overtemperature protection)Indoor useReliable and durable BMSEasy integration into existing and newly installed PV systemsSeamless integration into the entire Growatt Home ecosystemRemote firmware upgradeWarranty:10-year Growatt warranty (see warranty document in Downloads)Scope of deliveryThe Growatt BDC 95045-A1 High Voltage Battery Management System

The Growatt GBLI6532 6.5kWh 51.2V low-voltage LiFePO4 battery is Growatt's low-voltage battery for the single-phase inverters in the SPH and SPF series. The lithium battery is the cheapest and most durable solution, as it can be discharged over 6000 times with a discharge rate of up to 90%. Up to two batteries can be connected in parallel, which together achieve an output of 13kWh. Specifications: Weight of 57.5 kgNominal output of 6.5 kWp and usable output of 6 kWpDoD of 94.5 %Bracket for wall mounting included in the scope of deliveryNominal voltage (V): 51.2 VNominal capacity (Wh): 6500 WhUsable capacity (Wh): 6000 WhDimensions (mm): 475 x 765 x 145 mmOperating voltage (V): 48 - 57.6Charge/discharge current (A): 104.2Communication port: RS485 | KÖNNEN 2.0Operating temperature (C): -10 - 50CRegulated temperature (C): -20 - 45CApprovals: IEC62619 | CE | RCM | UL1973 | CEC | UN38.3+PI965Charge cycles: > 6000 (25C) Growatt GBLI6532 lithium battery 6.5 kWh is supplied fully charged by Growatt. The battery may only be connected when room temperature has been reached. Compatibility The Growatt GBLI6532 6.5kWh 51.2V low-voltage battery is compatible with Growatt SPH and SPF single-phase inverters. The connection cable art. no. 9888245 is required for connection to the inverter and a battery. When connecting two batteries to the inverter, the connection cable art. no. 9888246 is required. Warranty: 10-year Growatt warranty (see warranty document in Downloads) Installation We always recommend that you consult an authorized electrician when connecting your battery to ensure a safe and legal installation.

Growatt HVC 60050-A1 high-voltage battery management system for your energy storage solution. CompatibilityThe BMS is required to operate the ARK 2.5 High Voltage batteries. It can be used together with all 3-phase Growatt hybrid inverters of the SPH and SPA series. (SPH4000TL3 BH up to and including SPH10000TL3 BH and Growatt SPA4000TL3 BH - SPA10000TL3 BH) Smart High Voltage Battery Management System (dynamic control of charging power and protection against overloading the home network)Compatible with the ARK battery seriesFlexible capacity options, 5.12kWh to 25.62kWhEasy installationModular designLong service lifeMaximum protection for your home system thanks to integrated protection functions for your battery system (overvoltage, undervoltage, overload, short-circuit and overtemperature protection)Indoor useReliable and durable BMSEasy integration into existing and newly installed PV systemsSeamless integration into the entire Growatt Home ecosystemRemote firmware upgrade Warranty: 10-year Growatt warranty (see warranty document in Downloads) Scope of delivery The Growatt HVC 60050-A1 High Voltage Battery Management System.

Die Growatt ARK 2,5H-A2 Hochvolt Batterie (MPN ARK-2.5H-A2) ist ein LiFePO4-Speicher mit hoher Zyklenfestigkeit und langer Lebensdauer. Das modulare, stapelbare Konzept ermöglicht eine flexible Anwendung für verschiedene Szenarien und ist leicht zu installieren. Die Batterie bietet hervorragende Leistungen bei hoher Belastung und ist mit seinem IP65-Schutz auch für die Installation im Freien geeignet. Um Überspannungen im System zu vermeiden, kommt der Softstart zum Einsatz. Die A2-Version ist der Nachfolger der bisherigen ARK 2,5H-A1 und kann auch mit dieser problemlos kombiniert werden. Über die ARK 2,5H-A2-Batterie: Modulares, stapelbares BatteriekonzeptKobaltfreies Lithium-Eisenphosphat (LFP)Hohe Zyklenfestigkeit und lange LebensdauerWand- oder Bodeninstallation möglichSoftstart zum Schutz des Systems vor ÜberspannungenAutomatisches Aufwachen bei UnterspannungSchutzart IP65 für die Installation im FreienFerndiagnose und Firmware-Update Das ARK-Batteriesystem - Version A1 und A2 kombinierbar Durch das modulare Konzept ist das ARK-System flexibel einsetzbar und bei Bedarf erweiterbar. Ein Batterieturm kann mit mindestens 2 und bis zu 10 Speichermodule errichtet werden, es können auch mehrere Türme in einem System installiert werden. Hierbei kannst du die neue A2 mit der alten A1-Version problemlos kombinieren. Zum Betrieb wird pro Turm ein BMS-Steuerungselement, sowie ein Verbindungskabelset zum entsprechenden Wechselrichter benötigt. Zur Bodeninstallation ist zusätzlich eine Batterie-Basis pro Turm nötig. Die ARK-Hochvolt-Speicher sind mit den MIN- und MOD-XH, sowie den dreiphasigen SPH- und SPA-Wechselrichtern kompatibel. Je nach Inverter-Serie wird eine andere Steuerungseinheit, ein anderes Verbindungskabelset und eine unterschiedliche Startanzahl der Batterien benötigt. Das ARK-XH-System beginnt mit 2, das ARK-HV-System wiederum mit 3 Batterien. Einsatzgebiete Für netzgebundene, sowie autarke PhotovoltaikanlagenNotstromversorgungUnterbrechungsfreie Stromversorgungen (USV / UPS) Flexibel Erweitern Das ARK Batteriesystem von Growatt bietet eine hohe Flexibilität durch seine erweiterbaren Konfigurationsmöglichkeiten, die von 5,12 kWh bis zu 25,6 kWh reichen. Die Installation und Erweiterung des Systems gestaltet sich einfach und unkompliziert durch das modulare Design und die Verwendung von Kabeln. Eine weitere Innovation des ARK Systems ist, dass im Gegensatz zu anderen Batteriesystemen kein Batterieschrank benötigt wird. Lediglich eine Batteriebasis ist für einen stabilen Stand erforderlich. Softstart zum Schutz des Systems Der Softstart-Mechanismus ist eine Schutzfunktion, die bei der Growatt-Batterie zum Einsatz kommt, um das System vor Überspannungen zu schützen. Beim Starten oder Einschalten der Batterie wird die Stromversorgung allmählich erhöht, um das System vor Schäden zu bewahren, die durch eine plötzliche Spannungsspitze verursacht werden könnten. Auf diese Weise wird ein reibungsloser und sicherer Betrieb des Batteriesystems gewährleistet. Hohe Zyklen-Lebensdauer Die Growatt ARK Batteriemodule sind aufgrund ihrer extrem hohen Zyklen-Lebensdauer und der Verwendung von LiFePo4-Zellen eine ideale Speicherlösung für Photovoltaikanlagen. Unabhängig davon, ob es sich um ein netzgeführtes oder ein Inselsystem handelt, bietet der Growatt Speicher im Vergleich zu herkömmlichen Bleibatterien und anderen Lithium-Technologien zahlreiche Vorteile. Technische Daten: Batterie-Typ: Kobaltfreies Lithium-Eisenphosphat (LiFePo4)Energiekapazität: 2,56 kWhNutzbare Kapazität: 2,3 kWhNennspannung: 51,2 VBetriebsspannungsbereich: 47,2-56,8 VLade-/Entladestrom: 25 A/0,5 CSchutzart: IP65Temperaturbereich: -10~50° CAbmessung: 650 x 260 x 180 mmGewicht: ca. 28 kgZertifikate: IEC62619, CE, CEC, RCM, UN38.3 Lieferumfang: 1x Growatt ARK 2,5H-A2 2,56 kWh Hochvoltbatterie1x Batterieverbindungsset

About the ARK 2.5L-A2 battery: Modular, stackable battery conceptCobalt-free lithium iron phosphate (LFP)Wall or floor installation possibleHigh cycle resistance and long service lifeSoft start to protect the system from overvoltagesRemote diagnostics and firmware updateIP65 rating for outdoor installation10 years warranty The ARK battery system The modular concept makes the ARK system flexible and expandable if necessary. A battery tower can be constructed with at least two and up to ten storage modules. A connecting cable set is required to connect to the inverter. For ground installation, an additional battery base per tower is required. The ARK-LV memories are compatible with the single-phase SPH inverter series and the SPF3500 off-grid inverter. Areas of application For grid-connected and self-sufficient photovoltaic systemsEmergency power supplyUninterruptible power supplies (UPS) Flexible Expand Growatt's ARK battery system offers high flexibility through its expandable configuration options, ranging from 2.56 kWh to 25.6 kWh. The installation and extension of the system is simple and straightforward thanks to the modular design and the use of cables. Another innovation of the ARK system is that, unlike other battery systems, no battery cabinet is required. Only a battery socket is required for a stable stand. Soft start to protect the system The soft start mechanism is a protective function used on the growatt battery to protect the system from overvoltages. When the battery is started or turned on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. In this way, smooth and safe operation of the battery system is ensured. Integrated BMS The Growatt ARK low-voltage battery's Battery Management System (BMS) monitors a number of key parameters to ensure efficient and safe battery performance. It monitors the battery state of charge (SOC), mains voltage, current flow, cell voltage, and cell and PCBA temperatures. By precisely controlling these parameters, the BMS ensures optimal battery utilization, protects against potential damage, and extends battery life. High cycle life The Growatt ARK battery modules are an ideal storage solution for photovoltaic systems due to their extremely high cycle life and the use of LiFePo4 cells. Whether it is a grid-based or an island system, growatt storage offers numerous advantages compared to conventional lead-acid batteries and other lithium technologies. Technical data: Battery type: Cobalt-free lithium iron phosphate (LiFePo4)Energy capacity: 2.56 kWh/50AhUsable capacity: 2.3 kWh/45AhRated voltage: 51.2 VOperating voltage range: 47.2-56.8 VCharging/discharging current: 25AProtection class: IP65Operating temperature range: -10°C - +50°CDimensions: 650 x 260 x 185 mmWeight: 28 kgCertificates: IEC62619, CE, CEC, RCM, UN38.3 Scope of delivery: 1x Growatt ARK 2.5L-A2 2.56 kWh low-voltage battery1x battery connection set

The new GrowattAPX98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. What is important is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature The APX battery system Thanks to its modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be set up with a minimum of one to a maximum of 6 storage modules. One power module per tower is required for operation. This must be purchased separately. An additional base is required for ground mounting. Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15 kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Scope of delivery: 1x Growatt APX 98034-P2 BMS

The ARK high-voltage storage system from Growatt can be used flexibly thanks to its modular concept and can be expanded as required. A battery tower can be set up with a minimum of 3 to a maximum of 10 ARK high-voltage batteries. A BMS control unit and a connection cable set are included for commissioning with a compatible inverter. The battery base is also available as an option for ground installation. The Growatt high-voltage battery system contains: ARK 2.5H-A1 high-voltage battery LiFePO4 2.56kWh (3-10x depending on selection)HVC 60050-A1 ARK BMS control unitConnection cable set ARK battery to inverterOptional: Battery base ground installation Compatible inverters Growatt SPH BU-UPGrowatt SPA BHSPH 4000TL3 BH-UP 4kW Hybrid inverter 3-phaseSPA 4000TL3 BH-UP 4kW 3-phase string inverterSPH 5000TL3 BH-UP 5kW Hybrid Inverter 3-phaseSPA 5000TL3 BH-UP 5kW 3-phase string inverterSPH 6000TL3 BH-UP 6kW Hybrid Inverter 3-phaseSPA 6000TL3 BH-UP 6kW 3-phase string inverterSPH 7000TL3 BH-UP 7kW Hybrid Inverter 3-phaseSPA 7000TL3 BH-UP 7kW 3-phase string inverterSPH 8000TL3 BH-UP 8kW Hybrid Inverter 3-phaseSPA 8000TL3 BH-UP 8kW 3-phase string inverterSPH 10000TL3 BH-UP 10kW Hybrid Inverter 3-phaseSPA 10000TL3 BH-UP 10kW 3-phase string inverter ARK 2.5H-A1 high-voltage battery The Growatt ARK 2.5H-A1 high-voltage battery (MPN ARK-2.5H-A1) is a LiFePO4 storage system with high cycle stability and a long service life. The modular, stackable concept enables flexible application for different scenarios and is easy to install. The battery offers excellent performance under high loads and is also suitable for outdoor installation with its IP65 protection. The soft start is used to prevent overvoltage in the system. About the ARK 2.5H-A1 battery: Modular, stackable battery conceptCobalt-free lithium iron phosphate (LFP)High cycle stability and long service lifeWall or floor installation possibleSoft start to protect the system from overvoltageAutomatic wake-up in the event of undervoltageIP65 protection class for outdoor installationRemote diagnosis and firmware update Areas of application For grid-connected and stand-alone photovoltaic systemsEmergency power supplyUninterruptible power supplies (UPS) Soft start to protect the system The soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system. Long cycle life The Growatt ARK battery modules are an ideal storage solution for photovoltaic systems due to their extremely long cycle life and the use of LiFePo4 cells. Regardless of whether it is a grid-connected or off-grid system, the Growatt storage system offers numerous advantages compared to conventional lead batteries and other lithium technologies. Technical data for 1 battery module each: Battery type: Cobalt-free lithium iron phosphate (LiFePo4)Energy capacity: 2.56 kWhUsable capacity: 2.3 kWhNominal voltage: 51.2 VOperating voltage range: 47.2-56.8 VCharge/discharge current: 25 A/0.5 CProtection class: IP65Temperature range: -10~50° CDimensions: 650 x 260 x 180 mmWeight: approx. 28 kg10-year manufacturer's warrantyCertificates: IEC62619, CE, CEC, RCM, UN38.3 BMS control unit The Growatt HVC-60050-A1 BMS is a central monitoring and control unit that is part of the ARK HV high-voltage battery system and supports communication with the Growatt SPA and SPH inverters. Up to 10 battery modules, each with a capacity of 2.56 kWh, can be connected to this BMS. These modules can be connected in series to form a battery tower offering a total capacity of up to 25.64 kWh. Storage towers can also be connected together, requiring one BMS per tower. About the HVC 60050-A1 BMS Compatible with Growatt SPA and SPH invertersModular, stackable battery conceptMonitoring and control BMS control parameters Control parameters include state of charge (SOC), grid voltage, current, cell voltage, cell temperature and PCBA temperature measurement. By precisely monitoring these parameters, the BMS ensures optimum battery performance and longevity. Flexible expansion The ARK battery system from Growatt offers a high degree of flexibility thanks to its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Another innovation of the ARK system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand. Technical data: Input/output voltage range: 90~585VRated current: 25AProtection class: IP65Temperature range: -10~50° CDimension: 650 x 260 x 185 mmCommunication: CANWeight: 8.5 kg Connection cable set for inverter The Growatt battery cable set is required to connect Growatt ARK2.5H-A1 batteries to inverters of the three-phase SPH or SPA series. 2x 2m power cable (plus/minus)2m communication cable ARK battery base The Growatt ARK battery base is suitable for the ground installation of Growatt ARK battery modules and ensures that the battery tower stands securely. The Growatt ARK system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. for floor mounting of Growatt ARK HV and XH batteriesone base per battery towerWeight: 3kg

The modular concept of the Growatt APX battery system enables a wide range of applications and flexible expansion as required. Between 1 and 6 high-voltage batteries can be installed within a battery tower. The battery module is a high-voltage battery that features the latest LiFePO4 technology and boasts a nominal energy of 5kWh. The body also includes a battery management system of the latest generation, which protects the battery modules from adverse conditions, and a battery base that ensures a secure stand during ground installation. As an option, a back-up box can be added for emergency power generation. It is able to provide up to 10kWh from the solar storage system in the event of a power failure. The APX battery system contains: APX 5.0P-B1 high-voltage battery 5kWh LiFePO4 (1-6x depending on selection)APX 98034-P2 BMS power moduleAPX battery base High-voltage batteryOptional: SYN 50 XH 30 Back-Up Box emergency backup power The APX battery system demonstrates its flexible configuration options. These can be extended from 5kWh to 30kWh. The simple design makes installation and expansion very straightforward with the aid of cables. A further advance of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only the corresponding battery base is required for a secure stand. The APX series supports the combination of mixed battery packs from new and old batches, as well as different capacities. APX 5.0P-B1 high-voltage battery The APX 5.0P-B1 battery module from Growatt is a high-voltage battery with proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. In addition, the modular energy optimization ensures that the system fully utilizes the energy of each battery. In order to achieve a very flexible system application, old and new battery batches as well as batteries with different capacities can be mixed and connected. Soft start is used to avoid overvoltage in the system. The APX high-voltage battery: Flexible capacity options up to 30kWhCobalt-free LiFePO4 storage technology90% depth of discharge (DoD)Active protection at BMS levelIntegrated modular energy optimizationSupports the combination of new and old battery modules in one systemSoft start to avoid overvoltages in the systemModular and stackable designEasy installation10-year manufacturer's warranty Long cycle life The APX battery system is based on LiFePO4 chemistry without cobalt and offers a four-stage protection mechanism through a battery management system (BMS), modular energy optimization, a fuse and aerosol. This ensures increased safety, reliability and a long service life. The modular energy optimization ensures that the system fully utilizes the energy of each individual battery. Regardless of whether the solar system is grid-connected or stand-alone, Growatt storage offers several advantages over typical lead-acid batteries and other lithium technologies. Soft start to protect the system The soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system. Technical data: Battery type: Lithium iron phosphate (LiFePo4)Nominal voltage: 385VNominal energy: 5kWhOperating voltage range: 330-450VWeight: 50kgDimensions: 690 x 185 x 295 mmProtection class: IP66Ambient temperature: -10°C - +50°CCooling: Natural convectionWarranty: 10 year manufacturer's warranty Battery management system The new Growatt APX 98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. The important thing is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Battery base The Growatt APX Battery Base is suitable for the ground installation of Growatt APX battery modules and the associated BMS. It ensures that the battery tower stands securely. The Growatt APX system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. for floor mounting of Growatt APX batteries and associated BMSOne base per battery towerDimensions: 690 x 185 x 50 mm SYN 50-XH-30 Back-UP Box The SYN 50-XH-30 from Growatt is a back-up box that acts as an emergency backup power supply for the home. It is able to provide up to 10kW from the solar storage system in the event of a power failure. The switchover time is 0.5 seconds. The Back-Up Box is characterized by its user-friendly design, which makes it easy to install and operate. The SYN Back-Up Box: Backup power supply for the entire house, up to 10 kW100% 3-phase asymmetrical outputIntegrated switchEasy to installCombination options with the entire Growatt MOD-XH BP series Technical data: Max. Overcurrent protection AC input: 63 AMax. Continuous input current: 50 AAC output voltage: 230 V/400 VAC output voltage range: 180-280 VAC frequency: 50/60 HzAC frequency range: 45-65 HzAC rated power: 18 kWMax. continuous input current at 230 V: 26.1 APeak AC power in backup mode: 19.8k WAC peak current in backup mode: 28.7 ACommunication: RS485Operating temperature range: -40°C - +60°CProtection class: IP65Weight: 10.8 kgDimensions: 365 x 450 x 123 mm Compatible inverters The following hybrid inverters are intended for the storage system: MOD 3KTL3-XH BPMOD 4KTL3-XH BP MOD 5KTL3-XH BP MOD6KTL3-XH BPMOD 7KTL3-XH BP MOD 8KTL3-XH BP MOD 9KTL3-XH BP MOD 10KTL3-XH BP

The Growatt GBLI6532 6.5kWh 51.2V low-voltage LiFePO4 battery is Growatt's low-voltage battery for the single-phase inverters in the SPH and SPF series. The lithium battery is the cheapest and most durable solution, as it can be discharged over 6000 times with a discharge rate of up to 90%. Up to two batteries can be connected in parallel, which together achieve an output of 13kWh. Specifications: Weight of 57.5 kgNominal output of 6.5 kWp and usable output of 6 kWpDoD of 94.5 %Bracket for wall mounting included in the scope of deliveryNominal voltage (V): 51.2 VNominal capacity (Wh): 6500 WhUsable capacity (Wh): 6000 WhDimensions (mm): 475 x 765 x 145 mmOperating voltage (V): 48 - 57.6Charge/discharge current (A): 104.2Communication port: RS485 | KÖNNEN 2.0Operating temperature (C): -10 - 50CRegulated temperature (C): -20 - 45CApprovals: IEC62619 | CE | RCM | UL1973 | CEC | UN38.3+PI965Charge cycles: > 6000 (25C) Growatt GBLI6532 lithium battery 6.5 kWh is supplied fully charged by Growatt. The battery may only be connected when room temperature has been reached. Compatibility The Growatt GBLI6532 6.5kWh 51.2V low-voltage battery is compatible with Growatt SPH and SPF single-phase inverters. The connection cable art. no. 9888245 is required for connection to the inverter and a battery. When connecting two batteries to the inverter, the connection cable art. no. 9888246 is required. Warranty: 10-year Growatt warranty (see warranty document in Downloads) Installation We always recommend that you consult an authorized electrician when connecting your battery to ensure a safe and legal installation.