Fine stranded wire made from bare copper wires Core insulation based on PVC You purchase: 1 meter of cable with a cross-section of your choice Colors red, black, blue or green-yellow All ordered quantities are delivered in one piece. Product properties: Flame retardant according to IEC 60332-1-2 Technical data: Approvals: HD 21/VDE 0281 Insulation Specific volume resistance: > 20 GOhm x cm Conductor construction: Fine-stranded according to VDE 0295 Class 5/ IEC 60228 Class 5 Minimum bending radius: According to HD 516 at 20°C ±10°C cable temperature Rated voltage: U0/U: 450/750 V Test voltage: 2500 V Current carrying capacity: VDE 0298 Part 4 Temperature range: Permanently installed: -30°C to +80°C

Cable lugs TYPE A-M are made of electrolytic copper tube (SE-Cu according to DIN 13600). The tube wall thickness guarantees the best electrical conductivity and mechanical protection against vibrations and conductor pull-out. Our cable lugs are annealed to guarantee optimum ductility; this is essential as the cable lugs have to withstand severe deformation during crimping and the usual twisting of the lug during use. The connectors must also ensure reliable contact in the event of oscillations and vibrations. Under these circumstances, hardness plays a decisive role in preventing breaks and cracks. The inspection hole ensures that the conductor is inserted correctly. The sleeve length has been chosen to ensure easy and correct positioning between the crimping inserts during crimping.

The screw-type MIDI fuse holder from Voltima is used for the secure installation of DC MIDI fuses. The eyelets of the cable ends can be placed directly on the threaded bolts and screwed tight. This guarantees a firm and permanent connection, preventing voltage drop as far as possible. The housing with matching cover provides solid protection. MIDI-Fuse type fuses are strip fuses and are screwed directly to the holder. The corresponding nuts and snap rings are already pre-assembled on the holder. Features For 1 fuse Max. 200A current Max. 58V DC voltage For MIDI fuse type fuses High-strength plastic housing Required retaining rings and nuts included Note : Only the holder is included in the scope of delivery, the fuses must be purchased separately. Scope of delivery: 1x Voltima MIDI fuse holder, single

Fuse holder for a mega power fuse M8 threaded bolts and hexagon nuts Dimensions: 126x37.5x43.5mm Splash-proof Mega power fuse NOT included in the scope of delivery Model number : VMEGA-1

Voltima automatic circuit breakers are an important part of your electrical installation. The switches prevent power surges from damaging your appliances. With the practical and durable transparent cover, the switch complies with protection class IP56 and is therefore also suitable for use in marine environments. However, the circuit breaker is also a good choice for installations in motorhomes, buses and many other areas. Available for the following rated currents 60A 100A 200A 300A Characteristics For voltages from 12V to 48V For system protection in the event of overload or short circuit Protection class: IP56 Number of poles: 2 Housing and cover made of plastic Dimensions: 78 x 52 x 45 mm Automatic circuit breakers / miniature circuit breakers Circuit breakers are current-limiting automatic switches that can be switched on again after tripping. They are used instead of fuses as they offer greater operational safety. Circuit breakers are the automatic circuit breaker for effective short-circuit protection. The switches are an important part of every electrical installation and provide effective personal and system protection by safely switching off in the event of an overload or short circuit. Scope of delivery: 1x Voltima miniature circuit-breaker

Automatic fuses with maximum current loads from 20A to 100A: Can be used in cars (e.g. car hi-fi systems), boats or with photovoltaic accessories Protection against overload and short circuits Can be activated and deactivated at the touch of a button For cable cross-sections up to 10mm²

Voltima MIDI fuses are high-current screw-type fuses and are ideal for protecting your systems. The fuses are suitable for voltages up to 32V and are available in sizes ranging from 30A to 200A. To match the MIDI fuses, we also offer fuse holders suitable for 1 fuse or 2 fuses. Features Very low contact resistance for high system efficiency For a maximum voltage of 32V/DC Available sizes: 30A, 40A, 50A, 60A, 80A, 100, 125A, 150A, 175A, 200A High-current screw-type fuse Scope of delivery: 1x Voltima MIDI fuse - size of your choice

Battery connection cable / pole connector 25mm² or 35mm² or 50mm² 40cm long with M8 connection on both sides for connecting batteries

High-load fuse holder with cover for automotive screw-in fuses Fully insulated fuse holder for high-load fuses for protecting large consumers or high-load circuits. The fuse holder can be bayed and is equipped with M5 threaded bolts on both sides. Supplied without vehicle screw-in fuse. Dimensions: 61 x 30 x 25 mm

Robust and versatile battery connection cableThe cable is suitable for connecting a battery with M8 round terminals to a device that also has an M8 screw terminal. This includes the following device classes:Compatible with all inverters with M8 connections.Compatible with all M8 battery terminalsAll other devices such as charge controllers, inverters or battery chargers that have an M8 screw terminal and are to be connected to a battery with the same terminalCharacteristicsLength: 1m or 2mConnections: M8 -> M8Cable cross-section: 16mm² or 25mm² or 35mm² or 50mm²Core color: red / blackSuitable for installation in dry and damp rooms and vehiclesSuitable for applications with medium mechanical stressOil, cold and UV-resistant, flame-retardantNote and accessories recommendationTo select the correct connection cable, always follow the instructions in the operating instructions for the device to be connected. The cable cross-section must be selected so that the power loss is max. 2%. You can find additional accessories such as mega fuse holders and mega fuses in our online store.Scope of delivery:Battery connection cable - 2 single wires red / black

Victron 58V Sicherung vom Typ Megafuse zur Absicherung von 48V Geräten. Es stehen 4 Leistungsklassen zur Verfügung: 125A, 200A. 225A oder 300A sind verfügbar. Diese Sicherungen eigenen sich hervorragend um große 48V Wechselrichter oder Laderegler zuverlässig abzusichern. wählbare Größen und die wichtigsten technischen Eckdaten 125A 58V / 48V DC, Victron CIP137125010 200A 58V / 48V DC, Victron CIP137200010 225A 58V / 48V DC, Victron CIP137250010 300A 58V / 48V DC, Victron CIP137300010 passende Mega-SicherungshalterPassend zu den oben aufgelisteten Megasicherungen können folgende Megafuse Sicherungshalter verwendet werden: Victron Standard Mega-Sicherung Halter, CIP000100001 Victron modularer Mega-Sicherung Halter mit Deckel, CIP100200100 passende Sammelschienen wenn mehr als ein Sicherungskreis existiert Für den modularen Sicherungshalter stehen zur Erweiterung ausserdem 2 Busbars bereit mit deren Hilfe Sie über eine Sammelschiene bis zu 6 Hochstromkreise individuell absichern können: Victron Busbar 5, CIP100400060 - für max. 500A und 5 modulare Sicherungshalter Victron Busbar 6, CIP100400070 - für max. 1500A und 6 modulare Sicherungshalter Lieferumfang: 1x Victron 58V / 48V DC Mega-Sicherung nach Wahl

MEGA fuses for voltages up to a maximum of 32V for 12V & 24V systems. Ideal for use as a fuse on the battery cable of voltage converters and inverters or charge controllers with high charging currents The following fuse sizes are available: 100A150A175A200A250A300A Scope of delivery 5x MEGA fuse of your choice

Victron DC Sicherungen Mega-Sicherungen für Betriebsspannungen bis maximal 32V. Ideal für die Verwendung als Sicherung am Batteriekabel von Spannungswandlern und Wechselrichtern oder auch Ladereglern mit hohen Ladeströmen.verschiedene Mega-Sicherungshalter (auch modular) verfügbarPassend zu den oben aufgelisteten Megasicherungen können folgende Victron Sicherungshalter verwendet werden:standard Mega-Sicherung Haltermodularer Mega-Sicherung Halter mit DeckelFür den Modulare Sicherungshalter stehen zu erweiterung ausserdem 2 Busbars bereit mit deren Hilfe Sie bis zu 6 Hochstromkreise individuell absichern können:Victron Busbar 5 CIP100200100 - für max 500A und 5 modulare SicherungshalterVictron Busbar 6 CIP100200100 - für max 1500A und 6 modulare SicherungshalterLieferumfang:1x Victron DC Mega-Sicherung nach Wahl

Votronic DC mega fuses for operating voltages up to a maximum of 32V. Ideal for use as a fuse on the battery cable of voltage converters and inverters or charge controllers with high charging currents. Various mega fuse holders availableThe following Votronic fuse holders can be used to match the mega fuses listed above:Votronic 2251 high-load fuse holder with cover Votronic 2216 High load fuse holder 5-fold with coverThe MEGA fuses are also compatible with all other MEGA fuse holders from other manufacturers.Scope of delivery:1x Votronic DC Mega fuse of your choice

Voltima MIDI fuses are high-current screw-type fuses and are ideal for protecting your systems. The fuses are suitable for voltages up to 32V and are available in sizes ranging from 30A to 200A. To match the MIDI fuses, we also offer fuse holders suitable for 1 fuse or 2 fuses. Features Very low contact resistance for high system efficiency For a maximum voltage of 32V/DC Available sizes: 30A, 40A, 50A, 60A, 80A, 100, 125A, 150A, 175A, 200A High-current screw-type fuse Scope of delivery: 1x Voltima MIDI fuse - size of your choice

Cable lugs TYPE A-M are made of electrolytic copper tube (SE-Cu according to DIN 13600). The tube wall thickness guarantees the best electrical conductivity and mechanical protection against vibrations and conductor pull-out. Our cable lugs are annealed to guarantee optimum ductility; this is essential as the cable lugs have to withstand severe deformation during crimping and the usual twisting of the lug during use. The connectors must also ensure reliable contact in the event of oscillations and vibrations. Under these circumstances, hardness plays a decisive role in preventing breaks and cracks. The inspection hole ensures that the conductor is inserted correctly. The sleeve length has been chosen to ensure easy and correct positioning between the crimping inserts during crimping.

The screw-type MIDI fuse holder from Voltima is used for the secure installation of DC MIDI fuses. The eyelets of the cable ends can be placed directly on the threaded bolts and screwed tight. This guarantees a firm and permanent connection, preventing voltage drop as far as possible. The housing with matching cover provides solid protection. MIDI-Fuse type fuses are strip fuses and are screwed directly to the holder. The corresponding nuts and snap rings are already pre-assembled on the holder. Features For 1 fuse Max. 200A current Max. 58V DC voltage For MIDI fuse type fuses High-strength plastic housing Required retaining rings and nuts included Note : Only the holder is included in the scope of delivery, the fuses must be purchased separately. Scope of delivery: 1x Voltima MIDI fuse holder, single