The Hoymiles HMS Field-Connector is an essential part of the Hoymiles HMS Plug&Play cable system, which has been specially developed for PV systems with a single micro inverter.The Field-Connector connects directly to the inverter and provides a simple connection option to an AC cable. This straightforward plug-and-play design allows users to quickly and easily connect the single inverter system to the grid.Connection to the grid must only be carried out by an electrician.HoymilesHMS cable systemThe HMS cable system is an innovative solution for cabling Hoymiles HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way.For a system with an HMS inverter:1x HMS connection cable Plug&Play with field connector and Schuko plugor1x HMS Field Connector for assembling your own cableFor a system with, for example, 2 HMS inverters:1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional: - HMS Extension Connector to extend the cable - HMS Disconnect Tool for disassembling the connectorTechnical dataRated voltage: 300VRated current: 12 APower frequency and dielectric strength: 3000VACTemperature range: -40 to 85°CDimensions: 135 x 38 x 25mmProtection class: IP68For cables with an outer diameter of 8 - 9.5mmApplicable cables: 16/18 AWG, 1.0/1.5mm² copper cableScope of delivery:1x Hoymiles HMS Field Connector

The Hoymiles HMS Trunk Connector is used to connect the output of the HMS inverter to the AC cable and to connect several HMS connection cables to an AC plug.Connection to the mains supply must only be carried out by an electrician.Hoymiles HMS cable systemThe HMS cable system is an innovative solution for cabling Hoymiles HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way.ExamplesFor a system with one HMS inverter:1x HMS connection cable Plug&Play with field connector and Schuko plugor1x HMS Field Connector for assembling your own cableFor a system with, for example, 2 HMS inverters:1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional:- HMS Extension Connector to extend the cable- HMS Disconnect Tool for disassembling the connectorTechnical dataComponents: HMS Field Connector + cable + AC plugCable type: PV07AC-FCable length: 3m/5m/10m/15mDiameter: 1.5mm²Rated voltage: 250VRated current: 12ATemperature range: -40 to 85°CScope of delivery:1x Hoymiles HMS connection cable Plug&Play

The Hoymiles HMS Connector is used to form the AC cable into an AC end cable that completes the connection between the end of the AC line and the distribution box.Connection to the mains supply must only be carried out by an electrician.Hoymiles HMS cable systemThe HMS cable system is an innovative solution for cabling Hoymiles HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way.For a system with an HMS inverter:1x HMS connection cable Plug&Play with field connector and Schuko plugor1x HMS Field Connector for assembling your own cableFor a system with, for example, 2 HMS inverters:1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional: - HMS Extension Connector to extend the cable - HMS Disconnect Tool for disassembling the connectorTechnical specificationsRated voltage: 300VRated current: 40AMax. supported conductor size: 6mm²Max. supported cable outer diameter: 16.5mmAmbient temperature: -40 to 85°CProtection class: IP68Scope of delivery:1x Hoymiles HMS Connector

The Hoymiles HMS Sealing Cap is used to cover the unused connection on the HMS Trunk Connector.Connection to the power grid may only be carried out by an electrician.HoymilesHMS cable systemThe HMS cable system is an innovative solution for cabling HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way.ExamplesFor a system with one HMS inverter:1x HMS connection cable Plug&Play with field connector and Schuko plugor1x HMS Field Connector for assembling your own cableFor a system with, for example, 2 HMS inverters:1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional: - HMS Extension Connector to extend the cable - HMS Disconnect Tool for disassembling the connectorTechnical specificationsRated voltage: 300VRated current: 40AMax. supported conductor size: 6mm²Max. supported cable outer diameter: 16.5mmAmbient temperature: -40 to 85°CProtection class: IP68Scope of delivery:1x Hoymiles HMS Sealing Cap

The Hoymiles Disconnect Tool makes it easy to disassemble the HMS Field Connector and Trunk Connector and facilitates the tightening or loosening of nuts.Connection to the mains supply may only be carried out by an electrician.HoymilesHMS cable systemThe HMS cable system is an innovative solution for cabling Hoymiles HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way.For a system with an HMS inverter:1x HMS connection cable Plug&Play with field connector and Schuko plugor1x HMS Field Connector for assembling your own cableFor a system with, for example, 2 HMS inverters:1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional: - HMS Extension Connector to extend the cable - HMS Disconnect Tool for disassembling the connectorTechnical specificationsRated voltage: 300VRated current: 40AMax. supported conductor size: 6mm²Max. supported cable outer diameter: 16.5mmAmbient temperature: -40 to 85°CProtection class: IP68Scope of delivery:1x Hoymiles HMS Disconnect Tool

The Growatt connection cable effortlessly connects your Growatt NEO 800M-X inverter to a conventional earthed socket. The cable is equipped with a BC05A plug (also known as a "field connector") on the inverter side and a Schuko plug on the socket side. This cable is used to connect the micro inverter to your domestic power supply. Ready for immediate use as delivered as Plug & Playfor flexible installation of the NEO 800M-X inverter in your home Technical features Manufacturer part number: Power Cord 018.0728800Cable length: 5mApplication: Connection of the NEO 800M-X Microinverter to the domestic power supply via a Schuko socket outletPlug connector on the socket outlet side: Schuko plugConnector on the inverter side: BC05A plug Compatible micro inverter Growatt NEO 800M-X micro inverter Scope of delivery: 1x Growatt Power Cord AC cable

This T-junction set with a 2m long AC cable is required to connect the Hoymiles HMS microinverter. The preferred plug connection can be fitted to the open end of the AC cable. Connection to the mains supply may only be carried out by an electrician. Hoymiles HMS inverter system accessories A T-junction with AC cable is required for each HMS inverter At least one end cap and one release aid are required for each inverter system (from one microinverter) The disconnection aid and connection cap can be purchased as an option Example HMS accessory set: A PV system with 4x HMS-1800 (all interconnected) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 1x end cap Or: Four PV systems with 4x HMS-1800 (each as a single mini system) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 4x end cap Scope of delivery:1x Hoymiles T-junction with AC cable 2m

The Hoymiles HMS Plug&Play connection cable is specially designed for use in PV systems with just one HMS inverter. It consists of a field connector, an AC cable and an AC plug. The field connector is connected to the inverter and the plug to the household socket. This simple plug-and-play design allows the user to connect the single inverter system to the grid easily and quickly. Connection to the mains must only be carried out by an electrician. Hoymiles HMS cable system The HMS cable system is an innovative solution for cabling Hoymiles HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way. Examples For a system with one HMS inverter: 1x HMS connection cable Plug&Play with field connector and Schuko plug or 1x HMS Field Connector for assembling your own cable For a system with, for example, 2 HMS inverters: 1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional:- HMS Extension Connector to extend the cable- HMS Disconnect Tool for disassembling the connector Technical data Components: HMS Field Connector + cable + AC plugCable type: PV07AC-FCable length: 3m/5m/10m/15mDiameter: 1.5mm²Rated voltage: 250VRated current: 12ATemperature range: -40 to 85°C Scope of delivery: 1x Hoymiles HMS connection cable Plug&Play

The Hoymiles HMS Extension Connector makes it easy to extend the cable runs if the distance between two HMS inverters exceeds the standard length of the connecting cable.Connection to the mains supply must only be carried out by an electrician.Hoymiles HMS cable systemThe HMS cable system is an innovative solution for cabling Hoymiles HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way.For a system with an HMS inverter:1x HMS connection cable Plug&Play with field connector and Schuko plugor1x HMS Field Connector for assembling your own cableFor a system with, for example, 2 HMS inverters:1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional: - HMS Extension Connector to extend the cable - HMS Disconnect Tool for disassembling the connectorTechnical specificationsRated voltage: 300VRated current: 40AMax. supported conductor size: 6mm²Max. supported cable outer diameter: 16.5mmAmbient temperature: -40 to 85°CProtection class: IP68Scope of delivery:1x Hoymiles HMS Extension Connector

This unlocking aid is required for mounting the Hoymiles HMT microinverter. You can use the release aid to open the T-junction (AC box). Made from polycarbonate. Hoymiles HMT inverter system accessories A T-junction with AC cable is required for each HMT inverter At least one end cap and one release aid are required for each inverter system (from one microinverter) The disconnection aid and connection cap can be purchased as an option Example HMT accessory set: A PV system with 4x HMT-2250 (all interconnected) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 1x end cap Or: Four PV systems with 4x HMT-2250 (each as a single mini system) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 4x end cap Scope of delivery:1x Hoymiles unlocking aid

This unlocking aid is required for mounting the Hoymiles HMS microinverter. You can use the release aid to open the T-junction (AC box). Made from polycarbonate. Hoymiles HMS inverter system accessories A T-junction with AC cable is required for each HMS inverter At least one end cap and one release aid are required for each inverter system (from one microinverter) The disconnection aid and connection cap can be purchased as an option Example HMS accessory set: A PV system with 4x HMS-1800 (all interconnected) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 1x end cap Or: Four PV systems with 4x HMS-1800 (each as a single mini system) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 4x end cap Scope of delivery:1x Hoymiles unlocking aid

This disconnection aid is required for mounting the Hoymiles HMT microinverter. The disconnection aid allows you to detach the inverter connection cable from the T-junction. Made from polycarbonate. Hoymiles HMT inverter system accessories A T-junction with AC cable is required for each HMT inverter At least one end cap and one release aid are required for each inverter system (from one microinverter) The disconnection aid and connection cap can be purchased as an option Example HMT accessory set: A PV system with 4x HMT-2250 (all interconnected) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 1x end cap Or: Four PV systems with 4x HMT-2250 (each as a single mini system) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 4x end cap Scope of delivery:1x Hoymiles disconnection aid

The Hoymiles Gateway DTU-Pro is a data transmission unit that collects information and data from PV micro inverters via a 2.4 GHz radio solution and sends it to the S-Miles Cloud, the Hoymiles monitoring platform, via various communication options such as Ethernet or WLAN. Features Stable communication with HM series micro inverters Supports RS485, Ethernet port for communication with peripheral devices Monitoring and data storage at module level Local configuration with S-Miles Toolkit Support for remote O&M, including remote upgrade and parameter setting Intelligent zero export control and power export limitation Monitoring of PV generation and load consumption How it works The DTU-Pro data transmission unit has a monitoring capacity for up to 99 solar modules. This means that the system is also suitable for more complex PV systems. Users can read the data and alarms quickly and easily at module level. Remote operation and maintenance of the PV system can be carried out conveniently at any time and from any location via the Hoymiles S-Miles Cloud. S-Miles account creation The S-Miles account can only be created via the DTU dealer. We need some information from you to create your account. You can access our online account creation form here. When the account is created, you will automatically receive both user and installer access. The data can only be transmitted and the account created as soon as you have the Micro-Inverter and the corresponding DTU and you can read the serial numbers on the devices. Technical data Signal cloud communication: WLAN / Ethernet Sampling rate: Every 15 minutes Signal inverter communication: 2.4 GHz own HF (Nordic) Max. Distance (outdoor area): 200m Monitoring data limit: up to 99 solar modules (depending on installation environment) 4-LED indicators Power supply input voltage/frequency: 100 V/AC - 240 V/AC / 50 or 60 Hz Power supply output voltage/current: 5V / 2A Power consumption: 2.5W (typical), 5W (max.) Ambient temperature range: -20°C - +55°C Dimensions: 200 x 101 x 29 mm (without antennas) Weight: 0.28 kg Mounting options: Wall / table mounting Scope of delivery: 1x Hoymiles DTU-Pro data transmission unit

This end cap is required for installing the Hoymiles HMS microinverter. The cap closes the open end of the inverter. Made from polycarbonate. Hoymiles HMS inverter system accessories A T-junction with AC cable is required for each HMS inverter At least one end cap and one release aid are required for each inverter system (from one microinverter) The disconnection aid and connection cap can be purchased as an option Example HMS accessory set: A PV system with 4x HMS-18000 (all interconnected) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 1x end cap Or: Four PV systems with 4x HMS-1800 (each as a single mini system) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 4x end cap Scope of delivery:1x Hoymiles HMS end cap

This unlocking aid is required for mounting the Hoymiles HMS microinverter. You can use the release aid to open the T-junction (AC box). Made from polycarbonate. Hoymiles HMS inverter system accessories A T-junction with AC cable is required for each HMS inverter At least one end cap and one release aid are required for each inverter system (from one microinverter) The disconnection aid and connection cap can be purchased as an option Example HMS accessory set: A PV system with 4x HMS-1800 (all interconnected) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 1x end cap Or: Four PV systems with 4x HMS-1800 (each as a single mini system) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 4x end cap Scope of delivery:1x Hoymiles unlocking aid

The Hoymiles HMS Field-Connector is an essential part of the Hoymiles HMS Plug&Play cable system, which has been specially developed for PV systems with a single micro inverter.The Field-Connector connects directly to the inverter and provides a simple connection option to an AC cable. This straightforward plug-and-play design allows users to quickly and easily connect the single inverter system to the grid.Connection to the grid must only be carried out by an electrician.HoymilesHMS cable systemThe HMS cable system is an innovative solution for cabling Hoymiles HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way.For a system with an HMS inverter:1x HMS connection cable Plug&Play with field connector and Schuko plugor1x HMS Field Connector for assembling your own cableFor a system with, for example, 2 HMS inverters:1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional: - HMS Extension Connector to extend the cable - HMS Disconnect Tool for disassembling the connectorTechnical dataRated voltage: 300VRated current: 12 APower frequency and dielectric strength: 3000VACTemperature range: -40 to 85°CDimensions: 135 x 38 x 25mmProtection class: IP68For cables with an outer diameter of 8 - 9.5mmApplicable cables: 16/18 AWG, 1.0/1.5mm² copper cableScope of delivery:1x Hoymiles HMS Field Connector

This unlocking aid is required for mounting the Hoymiles HMS microinverter. You can use the release aid to open the T-junction (AC box). Made from polycarbonate. Hoymiles HMS inverter system accessories A T-junction with AC cable is required for each HMS inverter At least one end cap and one release aid are required for each inverter system (from one microinverter) The disconnection aid and connection cap can be purchased as an option Example HMS accessory set: A PV system with 4x HMS-1800 (all interconnected) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 1x end cap Or: Four PV systems with 4x HMS-1800 (each as a single mini system) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 4x end cap Scope of delivery:1x Hoymiles unlocking aid

The Hoymiles Disconnect Tool makes it easy to disassemble the HMS Field Connector and Trunk Connector and facilitates the tightening or loosening of nuts.Connection to the mains supply may only be carried out by an electrician.HoymilesHMS cable systemThe HMS cable system is an innovative solution for cabling Hoymiles HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way.For a system with an HMS inverter:1x HMS connection cable Plug&Play with field connector and Schuko plugor1x HMS Field Connector for assembling your own cableFor a system with, for example, 2 HMS inverters:1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional: - HMS Extension Connector to extend the cable - HMS Disconnect Tool for disassembling the connectorTechnical specificationsRated voltage: 300VRated current: 40AMax. supported conductor size: 6mm²Max. supported cable outer diameter: 16.5mmAmbient temperature: -40 to 85°CProtection class: IP68Scope of delivery:1x Hoymiles HMS Disconnect Tool

The Hoymiles HMS Sealing Cap is used to cover the unused connection on the HMS Trunk Connector.Connection to the power grid may only be carried out by an electrician.HoymilesHMS cable systemThe HMS cable system is an innovative solution for cabling HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way.ExamplesFor a system with one HMS inverter:1x HMS connection cable Plug&Play with field connector and Schuko plugor1x HMS Field Connector for assembling your own cableFor a system with, for example, 2 HMS inverters:1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional: - HMS Extension Connector to extend the cable - HMS Disconnect Tool for disassembling the connectorTechnical specificationsRated voltage: 300VRated current: 40AMax. supported conductor size: 6mm²Max. supported cable outer diameter: 16.5mmAmbient temperature: -40 to 85°CProtection class: IP68Scope of delivery:1x Hoymiles HMS Sealing Cap

The Hoymiles HMS Extension Connector makes it easy to extend the cable runs if the distance between two HMS inverters exceeds the standard length of the connecting cable.Connection to the mains supply must only be carried out by an electrician.Hoymiles HMS cable systemThe HMS cable system is an innovative solution for cabling Hoymiles HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way.For a system with an HMS inverter:1x HMS connection cable Plug&Play with field connector and Schuko plugor1x HMS Field Connector for assembling your own cableFor a system with, for example, 2 HMS inverters:1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional: - HMS Extension Connector to extend the cable - HMS Disconnect Tool for disassembling the connectorTechnical specificationsRated voltage: 300VRated current: 40AMax. supported conductor size: 6mm²Max. supported cable outer diameter: 16.5mmAmbient temperature: -40 to 85°CProtection class: IP68Scope of delivery:1x Hoymiles HMS Extension Connector

The Hoymiles HMS Trunk Connector is used to connect the output of the HMS inverter to the AC cable and to connect several HMS connection cables to an AC plug.Connection to the mains supply must only be carried out by an electrician.Hoymiles HMS cable systemThe HMS cable system is an innovative solution for cabling Hoymiles HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way.ExamplesFor a system with one HMS inverter:1x HMS connection cable Plug&Play with field connector and Schuko plugor1x HMS Field Connector for assembling your own cableFor a system with, for example, 2 HMS inverters:1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional:- HMS Extension Connector to extend the cable- HMS Disconnect Tool for disassembling the connectorTechnical dataComponents: HMS Field Connector + cable + AC plugCable type: PV07AC-FCable length: 3m/5m/10m/15mDiameter: 1.5mm²Rated voltage: 250VRated current: 12ATemperature range: -40 to 85°CScope of delivery:1x Hoymiles HMS connection cable Plug&Play

The Hoymiles HMS Connector is used to form the AC cable into an AC end cable that completes the connection between the end of the AC line and the distribution box.Connection to the mains supply must only be carried out by an electrician.Hoymiles HMS cable systemThe HMS cable system is an innovative solution for cabling Hoymiles HMS inverters in PV systems. It offers a user-friendly plug-and-play design that enables easier, faster and more reliable installation. The flexible HMS cable system allows the user to combine cables of different sizes or lengths to achieve the desired cabling configuration in a cost-effective way.For a system with an HMS inverter:1x HMS connection cable Plug&Play with field connector and Schuko plugor1x HMS Field Connector for assembling your own cableFor a system with, for example, 2 HMS inverters:1x HMS Sealing Cap1x HMS Connection Cable2x HMS Trunk ConnectorOptional: - HMS Extension Connector to extend the cable - HMS Disconnect Tool for disassembling the connectorTechnical specificationsRated voltage: 300VRated current: 40AMax. supported conductor size: 6mm²Max. supported cable outer diameter: 16.5mmAmbient temperature: -40 to 85°CProtection class: IP68Scope of delivery:1x Hoymiles HMS Connector

This T-junction set with a 2m long AC cable is required to connect the Hoymiles HMS microinverter. The preferred plug connection can be fitted to the open end of the AC cable. Connection to the mains supply may only be carried out by an electrician. Hoymiles HMS inverter system accessories A T-junction with AC cable is required for each HMS inverter At least one end cap and one release aid are required for each inverter system (from one microinverter) The disconnection aid and connection cap can be purchased as an option Example HMS accessory set: A PV system with 4x HMS-1800 (all interconnected) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 1x end cap Or: Four PV systems with 4x HMS-1800 (each as a single mini system) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 4x end cap Scope of delivery:1x Hoymiles T-junction with AC cable 2m

This unlocking aid is required for mounting the Hoymiles HMT microinverter. You can use the release aid to open the T-junction (AC box). Made from polycarbonate. Hoymiles HMT inverter system accessories A T-junction with AC cable is required for each HMT inverter At least one end cap and one release aid are required for each inverter system (from one microinverter) The disconnection aid and connection cap can be purchased as an option Example HMT accessory set: A PV system with 4x HMT-2250 (all interconnected) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 1x end cap Or: Four PV systems with 4x HMT-2250 (each as a single mini system) 4x T-junction with AC cable 1x unlocking aid 1x disconnection aid (optional) 4x end cap Scope of delivery:1x Hoymiles unlocking aid