The Votronic 5545 tank electrode 15-50 K is a universally applicable tank sensor for measuring the tank level. The tank electrode 15-50 K is suitable for fallow water and sewage tanks as well as for drinking water tanks. Thanks to the use of appropriate materials, these tank sensors also comply with the DIN 2001-2 drinking water regulations and are designed for tanks with a height of between 15 and 50 cm.Another special feature is that the tank electrodes can be mounted on the top of the tank from the inside as well as from the outside. For fresh water tanks, they can even be mounted on the underside of the tank.Key product features of the 15-50 K tank electrode Rod electrode, easy to shorten to tank height For tanks with a height between 15 and 50 cm Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 m Connection cable 75 cm long Simple adjustment to the specified tank height Test mark: E-test (EMC/vehicle directive) Complies with DIN standard 2001-2 from the Drinking Water Ordinance Linear, infinitely variable fill level signal Suitable for 12V and 24V continuous operation Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic gauges: Fresh water tank gauge S, 5311 Waste water indicator S, 5313 Holding tank indicator S, 5315 Info Panel Pro, 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery:1x Votronic 5545 15-50 K tank sensor1x mounting material consisting of sealing ring, union nut PG 29, connection cable 75 cm1x operating instructions

The fresh water tank gauge S from Votronic (MPN 5311) was designed for precise level measurement and can be used for all tank materials and tank sizes. The tank level is visualized via a 3-colour scalar, which is displayed on 10 LEDs, each representing 10% of the tank content. The display works continuously, as intermediate levels are displayed with variable brightness and therefore trends can be recognized immediately.The fresh water tank display S is designed as a panel version to match the VOTRONIC modular system and fits in perfectly with other VOTRONIC display units (uniform height 85 mm). Of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of just 18 mm allow installation in almost any location. The indicator is protected against reverse polarity and overload and is easy to connect via screw terminals on the back of the device.Key product features of the fresh water tank indicator S, 5311 Suitable for 12V and 24V DC operating voltage Low current consumption: only 1 - 30 mA Test mark: E-test, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimensions: 29 x 63 x 18 mm Can be switched on and off at the touch of a button High display resolution of the tank level thanks to 10-stage display Suitable for the Votronic module system Can also be operated with 2 tank sensorsThe display units can also be assigned to 2 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for switching, e.g. switch panel 16 A S art. no. 1289 or switch panel 2x16 A S art. no. 1291Compatible with many Votronic tank sensors Tank electrode 12-24 K, 5543 Tank electrode 15-50 K, 5545 Tank electrode 20 K-WC, 5555 Tank sensor FL, 5530 Tank sensor 30-110 K-FL, 5551 Scope of delivery:1x Votronic 5311 fresh water tank display S1x set of fixing screws1x drilling template1x Operating instructions

The level gauge / tank electrode FL from Votronic (MPN 5530) is based on a flexible cable probe and can be easily shortened to the appropriate tank height. The tank sensor is ideally suited for both fresh water tanks and waste water tanks. Thanks to the use of appropriate materials, these tank sensors also comply with the DIN 2001-2 drinking water regulations. The tank sensor is designed for high tanks with a height of between 30 and 110 cm.Another special feature of the Votronic FL tank electrode is that it can be mounted both on the inside and outside of the tank. The top and side walls of the tank can be used for mounting the Tank Sensor FL.Key product features of the Tank Sensor FL 5530 Permissible operating voltage: 12V and 24V DC (suitable for continuous operation) for mounting on the top or side wall of the tank suitable for fresh and waste water tanks suitable for tank heights from 30 to 100 cm Linear, stepless signal of the fill level Test mark: E-test (EMC/vehicle directive) Complies with DIN standard 2001-2 from the Drinking Water Ordinance Flexible cable probe, easy to shorten to tank height Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 mm Connection cable 75 cm long for plastic tanks: wall thickness max. 8 mm Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic gauges: . Fresh water tank gauge S, 5311 Waste water indicator S, 5313 Holding tank indicator S, 5315 Info Panel Pro 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery:1x Votronic 5530 FL tank sensor1x Flexible cable probe, sealing ring and PG 29 union nut1x Operating instructions

Battery temperature sensor with 3 m connection cable and M8 mounting hole. Potted against environmental influencesSuitable for all VOTRONIC automatic chargers of the Pb and VAC series, VCC charging converters and solar controllers of the SR and MPP series.

The Votronic waste water tank gauge S (MPN 5313) was designed for precise level measurement and can be used for all tank materials and tank sizes. The tank level is visualized via a 3-colour scale, which is displayed on 10 LEDs, each representing 10% of the tank content. The display works continuously, as intermediate levels are displayed with variable brightness and therefore trends can be recognized immediately.The waste water tank display Tank display S is designed as a panel version to match the VOTRONIC modular system and fits in perfectly with other VOTRONIC display units (uniform height 85 mm). Of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of just 18 mm allow installation in almost any location. The indicator is protected against reverse polarity and overload and is easy to connect via screw terminals on the back of the device.Key product features of the waste water tank indicator S, 5313 Suitable for 12V and 24V DC operating voltage Low current consumption: only 1 - 30 mA Test mark: E-test, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimensions: 29 x 63 x 18 mm Can be switched on and off at the touch of a button High display resolution of the tank level thanks to 10-stage display Suitable for the Votronic module system Can also be operated with 2 tank sensors The display units can also be assigned to 2 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for switching, e.g. switch panel 16 A S art. no. 1289 or switch panel 2x16 A S art. no. 1291Compatible with many Votronic tank sensors Tank electrode 12-24 K, 5543 Tank electrode 15-50 K, 5545 Tank electrode 20 K-WC, 5555 Tank sensor FL, 5530 Tank sensor 30-110 K-FL, 5551 Scope of delivery:1x Votronic 5313 waste water tank display S1x set of fixing screws1x drilling template1x operating instructions

The Votronic 5551 tank electrode 30-110 K-FL is a universally applicable tank sensor for measuring the tank level of drinking or fresh water tanks. The tank electrode 30-110 K-FL is suitable for both waste water tanks and fresh water tanks. Thanks to the use of appropriate materials, these tank sensors also comply with the DIN 2001-2 drinking water regulations. The tank sensor is designed for high tanks with a height of between 30 and 110 cm.Another special feature is that the tank electrodes can be mounted on the top of the tank from the inside as well as from the outside. In the case of fresh water tanks, they can even be mounted on the underside of the tank.Key product features of the 30-110 K-FL tank electrode Permissible operating voltage: 12V and 24V DC for installation on the top of the tank Suitable for drinking water and waste water tanks Flexible cable probe, easy to shorten to tank height Linear, stepless signal of the fill level Test mark: E-test (EMC/vehicle directive) Complies with DIN standard 2001-2 from the Drinking Water Ordinance Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 mm Connection cable 75 cm long For plastic tanks: wall thickness max. 8 mm Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic gauges: Fresh water tank gauge S, 5311 Waste water gauge S, 5313 Holding tank indicator S, 5315 Info Panel Pro 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery:1x Votronic 5551 30-110 K-FL tank sensor1x Flexible cable probe, sealing ring, union nut PG 291x operating instructions

Bluetooth Connector S-BC from Votronic The Votronic Energy Monitor consists of a special communication module (Bluetooth Connector S-BC) which, in conjunction with a Votronic solar charge controller (from 2014 serial number (serial number 14Vxx.xxxxx)) with LCD Solar Computer S and/or the LCD Battery Computer S or VPC Jupiter with Smart Shunt, also transmits the values shown on the corresponding display to a mobile device via Bluetooth. The required app for Android or IOS is available free of charge in the Google Play Store or IOS App Store Connecting the Bluetooth Connector S-BC is very easy. It is simply plugged between the Votronic solar charge controller and the LCD Solar Computer S or between the Smart Shunt and the LCD Battery Computer S or VPC Jupiter using the modular cable included in the scope of delivery. The device has 2 inputs and 2 outputs, so that 1 solar controller with LCD solar computer and 1 Smart Shunt with LCD battery computer or VPC Jupiter can be connected together to a communication module. In this way, all the information from the on-board battery, such as voltage, charging and discharging currents and the remaining capacity, as well as all the data from the solar system can be conveniently read via a cell phone or tablet. In addition, the most important data is logged, graphically processed and stored for a longer period of time. It is even possible to output the data as a CSV file for your own analysis purposes. Of course, the Bluetooth Connector S-BC can also be retrofitted at any time. Technical features Connection via Bluetooth 4.0 (2.4Ghz) Range up to 50 outdoors Compatible with Votronic solar controller, VBCS Triple Charger, LCD battery computer and VPC Jupiter Dimensions HxWxD in mm: 75 x 47 x 24 Weight: 37g Test mark: CE, E-test (EMC/vehicle directive) Scope of delivery: Votronic Bluetooth Connector S-BC (MPN 1430), operating instructions, 2 x control cable 6-pin 1m long

The Votronic Info Panel Pro (MPN 5330) for 12V systems is a convenient display and control panel and has been specially developed for use in motorhomes. It takes over the most important control and switching tasks and offers direct monitoring of fresh water, waste water and waste tanks, as well as the on-board and starter battery. It is also equipped with a main battery switch and a main pump switch for the fresh water supply.On the left-hand side, several LEDs indicate the current battery voltage in a range from 10.5V to 15.0V. If the voltage is too low, this is signaled by red LEDs. At the touch of a button, you can switch between the voltage display of the on-board and starter battery or deactivate the display.There are two further displays on the Info Panel Pro for monitoring tanks, which are represented by light bars with 10 LEDs each. The displays work continuously, as intermediate levels are displayed with variable brightness and trends can therefore be recognized immediately. This gives you a complete overview of all filling and emptying processes. The display can be switched on and off at the touch of a button and switches off again automatically after approx. 10 minutes. The tank display on the right-hand side of the Info Panel Pro can also be switched to two measuring inputs (e.g. waste water and waste tank) as standard.The Info Panel Pro is equipped with integrated protection against reverse polarity and overload. The labeled connections for 6.3 mm flat plugs (power connections) and screw terminals (signal connections) are located on the rear.To make installation easier for you, you also receive a drilling template with the Info Panel Pro. Thanks to the low installation depth of just 15 mm, the device can be installed almost anywhere.Scope of delivery:1v Votronic Info Panel Pro 5330, operating instructions

Votronic remote control S suitable for automatic chargers of the Pb and VAC series. If the device is difficult to access, the control LEDs provide a remote display of the device status and charging progress. One of the respective main device functions can be remote-controlled with the switch, e.g. silent run (night mode) for chargers in the Pb and VAC series. The remote control is designed as a panel version and matches the other displays of the VOTRONIC module system both visually and mechanically (same height 85 mm). Product details Automatic loaders Pb series Automatic loaders VAC series Made in Germany Technical data Dimensions 85x47mm Installation dimensions 65x35 (max. depth 16 mm) Weight 23g Test mark CE, E-test (EMC/vehicle directive) Scope of delivery Connection cable 5m long, ready to plug in on both sides for device connection, fixing screws, drilling template

Modular cable 6-pin as before but without connectorSuitable for: Battery computer, ammeter, solar display, solar computer, remote controls for Automatic Charger, MobilPOWER Inverter etc.Length: 5 mModular cable 6-pin WITHOUT connector

The Votronic 2076 Remote Control S is a control display for monitoring a VCC charging converter. Suitable for current charging converters of the VCC 1212 series. The device status and charging progress are displayed via the control LEDs and the device switch is used for specific device functions. Designed as a panel version with a flat surface, the remote control fits in seamlessly with the other displays of the VOTRONIC module system, both visually and mechanically (same height 85 mm). Important product features of the Votronic 2151 RCBO 16-30 Mini compatible with all VCC charging converters from Votronic always keep an eye on the most important functions of your VCC Size and design to match the rest of the Votronic module system Dimensions: (WxHxD): 47x85x18 mm Incl. 5m control cable and drilling template for installation Scope of delivery: 1x Votronic 2076 LED Remote Control S for VCC charging converterControl cable 5mFastening screwsDrilling template

The Votronic waste tank indicator S (MPN 5315) was designed for precise level measurement and can be used for all tank materials and tank sizes. The tank level is visualized via a 3-colour scale, which is displayed on 10 LEDs, each representing 10% of the tank content. The display works continuously, as intermediate levels are displayed with variable brightness and therefore trends can be recognized immediately.The waste holding tank display Tank display S is designed as a panel version to match the VOTRONIC modular system and fits in perfectly with other VOTRONIC display units (uniform height 85 mm). Of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of just 18 mm allow installation in almost any location. The indicator is protected against reverse polarity and overload and is easy to connect via screw terminals on the back of the device.Key product features of the waste tank indicator S, 5315 Suitable for 12V and 24V DC operating voltage Low current consumption: only 1 - 30 mA Test mark: E-test, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimensions: 29 x 63 x 18 mm Can be switched on and off at the touch of a button High display resolution of the tank level thanks to 10-stage display Suitable for the Votronic module system Can also be operated with 2 tank sensorsThe display units can also be assigned to 2 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for switching, e.g. switch panel 16 A S art. no. 1289 or switch panel 2x16 A S art. no. 1291Compatible with many Votronic tank sensors Tank electrode 12-24 K, 5543 Tank electrode 15-50 K, 5545 Tank electrode 20 K-WC, 5555 Tank sensor FL, 5530 Tank sensor 30-110 K-FL, 5551 Scope of delivery:1x Votronic 5315 holding tank display S1x set of fixing screws1x drilling template1x operating instructions

The Solar Data Extender combines the data from up to three solar controllers so that they can be shown on a single display. The familiar LCD display can still be used. It is compatible with the following devices: Solar charge controllers in SR and MPP technology (from serial no. 14Vxx.xxxxx) Battery Charger type VBCS Triple LCD Solar Computer S (from serial no. 15V40.xxxxx) LCD Charge Control S VPC series with solar function Bluetooth Connector S-BC Installation and connection The Solar Data Extender can be retrofitted at any time. It has three independent inputs (IN1, IN2, IN3). The signals are combined and made available via the output (OUT). A solar display (e.g. LCD Solar Computer S) can be connected there. It is connected between the Votronic solar charge controller and the solar display (e.g. LCD Solar Computer S) using the modular cable included in the scope of delivery. The IN1 connection must always be connected, as this is used to supply power to the device. Technical data Data Extender 3 in 1 Nominal voltage (supply via connected devices) 12 and 24 Operating voltage range [V] 8 - 32 Current consumption in standby, typical [mA] 0.7 Current consumption during activity, typical [mA} 10 Dimensions (WxHxD) in [mm] 75 x 47 x 24 Weight in [g] 37 Test mark CE, E-test (EMC/vehicle directive) Ambient conditions, humidity: max. 95% room humidity, non-condensing Scope of delivery: 3 pcs. control cable 6-pin 0.5 m long, operating instructions

Suitable for all automatic chargers in the Pb and VAC series. The single-color green LED indicates the operational readiness of the charger and the mains/power supply. The remote indicator can be mounted at any desired location (both in a clearly visible position in the interior such as the dashboard or similar, as well as in the exterior, e.g. near the driver's door or similar) via an 8 mm hole. An associated sealing ring ensures IP67 tightness. The plug-in 5 m long connection cable ensures direct connection of the electronic unit to chargers from the Pb, VAC, VAC-F, VAC-F II and VAC-Duo series. Scope of delivery: 0.4 m long red/black connecting leads Connection adapter Connection cable 5m long, ready to plug in on both sides for device connection sealing ring union nut

Temperature sensor with 3 m connection cable and transparent plastic cap for mounting in the vehicle. (hole 7.5mm) Suitable for Votronic VPC series and LCD thermometer / clock S.

The Votronic tank electrode 20 K-WC (HAN 5555) is a tank sensor for cassette toilets in motorhomes, which are now considered the absolute standard. Cassette toilets are compact in design and have a display which, unfortunately, usually only marks the full state. Once this is reached, the toilet in the vehicle can no longer be used. The use of tank sensors in combination with Votronic fill level indicators allows you to plan the disposal and replacement of your mobile tanks in advance.The main product features of the 20 K-WC tank sensor Tank sensor specially designed for cassette toilets and mobile tanks Compact, robust, waterproof (IP67) Simple installation, no inspection opening required With 3-pin circular plug connection for disconnecting the tank Complete installation material included in the scope of delivery Rod electrode, easy to shorten to tank height Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 mm Test mark: E-test (EMC/vehicle directive) Connection cable 75 cm long Mounting from above using mounting ring Detachable plug connection for tank emptying Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic displays: . Waste water indicator S, 5313 Holding tank indicator S, 5315 Info Panel Pro, 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Solid measurement technology and simple installationThe tank electrode 20 K-WC has been further developed on the basis of the long-established tank electrode to provide a fully-fledged level indicator especially for use in cassette toilets. The compact design makes it possible to simply screw the tank sensor into the toilet cassette from above using the mounting ring supplied. The 38 mm diameter mounting hole required for this is easy to make using a hole saw. The fully encapsulated electronics are designed to be waterproof (IP67) and suitable for rough operation when flushing the toilet cassette.To change the cassette, the tank electrode 20 K-WC is disconnected from the vehicle via a solid 3-pin round plug and the plug is fixed to the cassette. In addition to the 3-pin round plug connection, the scope of delivery also includes a mounting ring and the complete mounting material.Scope of delivery:1x Votronic 5555 Tank electrode 20 K-WC

Der Votronic Duo-Akku-Tester S ist die kompakte und präzise Lösung zur Überwachung Ihrer Bord- und Starterbatterie in 12V-Systemen. Mit seiner LED-Leuchtpunktanzeige behalten Sie den Ladezustand beider Batterien jederzeit im Blick – ideal für Camper, Wohnmobile, Boote und Off-Grid-Anwendungen. Ihre Vorteile auf einen Blick Doppelte Spannungsanzeige: Wahlweise Bordbatterie oder Starterbatterie per Tastendruck Präzise Leuchtpunkt-LED-Anzeige: Darstellung des relevanten Spannungsbereichs von Tiefentladung bis maximale Ladespannung (ca. 10,5–15,0 V) Zwischenwerte ablesbar: Unterschiedlich helle benachbarte LEDs ermöglichen genaue Zwischenablesung Warnfunktion: Rote LEDs signalisieren bei niedriger Spannung rechtzeitig Nachladebedarf Automatische Abschaltung: Schaltet sich nach 10 Minuten Inaktivität aus → minimaler Stromverbrauch (nur 1–15 mA im Betrieb) Extrem flache Bauweise: Nur 15 mm Einbautiefe – ideal für enge Plätze und Nachrüstung Perfekte Integration: Panel-Version im VOTRONIC-Modulsystem (Höhe 85 mm) – harmoniert optimal mit anderen Votronic-Anzeigen Technische Highlights Betriebsspannung: 12 V Messbereich: 10,5 – 15,0 V Stromaufnahme: 1 – 15 mA (sehr gering) Bedienung: Taster für Batterieauswahl / Ein/Aus Anschluss: Praktische Schraubklemmen auf der Rückseite Einbautiefe: Nur 15 mm Frontmaße: Kompakt 47 x 85 mm (passend zum Votronic-Modulsystem) Einfache Montage & Nachrüstung Dank geringer Einbautiefe und der mitgelieferten Bohrschablone lässt sich der Duo-Akku-Tester S nahezu überall montieren – auch wenn dahinter Stauraum bleibt. Er eignet sich hervorragend als Einzelgerät oder in Kombination mit anderen Votronic-Panelen. Lieferumfang Votronic Duo-Akku-Tester S 4 × Befestigungsschrauben Bohrschablone Ausführliche Bedienungsanleitung (deutsch) Der Votronic Duo-Akku-Tester S bietet Ihnen zuverlässige, einfache und stromsparende Batterieüberwachung – perfekt für alle, die den Zustand ihrer 12V-Batterien im Wohnmobil, Van oder Boot sicher im Auge behalten möchten.

Das Votronic LCD-Thermometer ist die praktische 3-in-1-Kombination aus präzisem 3-fach-Thermometer, hochgenauer Quarzuhr und stromsparendem Bordnetz-Betrieb – speziell für Wohnmobile, Caravans, Boote, Kastenwagen und Camper entwickelt. Mit großer, gut ablesbarer LCD-Anzeige und weißer Hintergrundbeleuchtung behalten Sie Temperaturen und Zeit immer komfortabel im Blick. Ihre Vorteile auf einen Blick 3 Temperaturanzeigen gleichzeitig – Innenraum, Außentemperatur + ein frei nutzbarer dritter Sensor Große, kontrastreiche LCD-Anzeige – Sehr gut lesbar auch aus größerer Entfernung Weiße Hintergrundbeleuchtung – Perfekte Ablesbarkeit bei schlechten Lichtverhältnissen Extrem stromsparend – Minimaler Verbrauch aus dem 12/24-V-Bordnetz Hochgenaue Quarzuhr – 24-Stunden-Format mit Wochentag, blinkender Sekundenanzeige und Gangreserve DCF-fähig (optional) – Automatische Funkzeitsynchronisation (DCF-Modul separat erforderlich) Vielseitig einsetzbar – Ideal für Innen-, Außen- und Zusatzüberwachung (z. B. Kühlbox, Medikamentenlager, Wärmebox) Mess- & Anzeigefunktionen im Detail Thermometer: Innentemperatur: integrierter Sensor Außentemperatur: externer Fühler (im Lieferumfang, z. B. unter Stoßstange montierbar) Dritter Messkanal: frei nutzbar (z. B. Kühlbox, Wärmeschrank, Medikamentenfach) Messbereich: -30 °C bis +70 °C (alle Sensoren) Auflösung: 0,1 °C Uhr: 24-Stunden-Format mit Stunden, Minuten und blinkendem Doppelpunkt Wochentagsanzeige in der unteren Zeile Hohe Ganggenauigkeit Gangreserve bei Spannungsausfall DCF-Funk-Synchronisation möglich (separates DCF-Modul erforderlich – Anzeige-Symbol vorhanden) Technische Highlights Betriebsspannung: 12 V / 24 V Bordnetz Sehr geringer Stromverbrauch Hintergrundbeleuchtung: weiß, ein- und ausschaltbar Auflösung Temperatur: 0,1 °C Messbereich: -30 °C bis +70 °C Kompakte Einbaugröße – passt hervorragend ins Votronic-Modulsystem Lieferumfang 1 × Votronic LCD-Thermometer (3-fach Thermometer + Quarzuhr) 1 × Externer Temperatursensor (Außenfühler) 4 × Befestigungsschrauben 1 × Bohrschablone 1 × Montage- und Bedienungsanleitung (deutsch)

Votronic LCD-Voltmeter S (MPN 1264) – Präzise Doppel-Spannungsanzeige Das Votronic LCD-Voltmeter S ist das ideale Kontrollinstrument für alle, die den exakten Ladezustand ihrer Batterien im Blick behalten wollen. Das digitale Messgerät zeigt wahlweise die Spannung der Bord- oder der Starterbatterie als präzisen Zahlenwert an. Eine zusätzliche, grafische Balkenanzeige visualisiert den Spannungsverlauf von der Tiefentladung bis zur maximalen Ladespannung, sodass der Status auf einen Blick erfassbar ist. Besonders flexibel zeigt sich das Voltmeter bei der Systemspannung: Es kann individuell für 12V- oder 24V-Betrieb eingestellt werden. Ein Mischbetrieb – beispielsweise ein 24V-Starterkreis kombiniert mit einer 12V-Bordversorgung – ist problemlos möglich, da die Konfiguration für beide Batterieanschlüsse separat erfolgt. Das Display ist bei Bedarf hell weiss hinterleuchtet und garantiert beste Ablesbarkeit bei allen Lichtverhältnissen. Integration und Montage Das LCD-Voltmeter S ist Teil des VOTRONIC Modulsystems. Mit einer einheitlichen Bauhöhe von 85 mm und einer extrem geringen Einbautiefe von nur 22 mm lässt es sich optisch perfekt mit anderen Panels kombinieren und an nahezu jeder Stelle im Fahrzeug oder Boot montieren. Der Anschluss erfolgt unkompliziert über robuste Schraubklemmen auf der Rückseite. Technische Daten im Überblick Betriebsspannung: 12 V / 24 V (separat einstellbar)Anzeige: Digitaler Zahlenwert + grafische BalkenanzeigeMessbereich 12V: 10,5 V bis 15,0 V (Balkenanzeige)Messbereich 24V: 21,0 V bis 30,0 V (Balkenanzeige)Beleuchtung: Weiss, schaltbarAbmessungen: 85 x 47 x 25 mm | Einbautiefe: ca. 22 mmGewicht: 40 g Lieferumfang: 1x Votronic LCD-Voltmeter S4x Befestigungsschrauben1x Bedienungsanleitung1x Bohrschablone Bei Swissbatt24 wird per Express-Versand aus unserem Schweizer Lager verschickt.

Votronic Aufbaugehäuse für LCD-Anzeigen (MPN 2024) – Silbergrau Das Votronic Aufbaugehäuse (2024) ist die ideale Lösung für die Aufputz-Montage Ihrer LCD-Anzeigegeräte. Gefertigt aus besonders widerstandsfähigem Kunststoff in elegantem Silbergrau, bietet es den aktuellen Messgeräten von Votronic einen stabilen Rahmen und effektiven Schutz. Dank seiner kompakten Bauform ermöglicht es eine saubere Installation, wenn ein flacher Einbau in die Wand nicht möglich oder nicht erwünscht ist. Das Gehäuse ist optisch perfekt auf das Votronic-Design abgestimmt und sorgt für ein professionelles Finish in Ihrem Wohnmobil, Boot oder Technikraum. Die einfache Handhabung gewährleistet eine schnelle Montage der Anzeigeeinheit bei minimalem Platzbedarf. Eigenschaften Kompatibilität: Speziell entwickelt für aktuelle Votronic LCD-Anzeigegeräte.Material: Hochwertiger, robuster Kunststoff.Farbe: Silbergrau (passend zum Votronic Modul-Design).Abmessungen (B x H x T): 78 x 84 x 25 mm. Lieferumfang: 1x Aufbaugehäuse Votronic LCD-Anzeigegeräte silber