The Growatt ARK Battery Base is suitable for the floor installation of Growatt ARK battery modules and ensures that the battery tower stands securely. The Growatt ARK system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. ARK battery base for floor mounting of Growatt ARK HV and XH batteriesOne base per battery towerWeight: 3kg The ARK battery system The Growatt ARK battery system has a modular design. Additional batteries can be stacked on top of each other. The ARK-2.5L-A1 has a capacity of 2.56 kWh and a maximum (discharge) current of 25A. The nominal voltage is 51.2 V and the operating voltage is between 47.2 V and 56.8 V. The lithium iron phosphate battery (LFP) is cobalt-free, which results in a more cost-effective battery, for example. The battery has a service life of over 6000 cycles. Scope of delivery: 1x Growatt ARK battery base

With the Growatt ShineLink WiFi module, all inverter data is stored and can be accessed via the Shinelink. This gives a clear picture of the performance of the Growatt inverters and the data archive of the ShineLink is backed up for 30 days. The ShineLink can monitor up to 8 inverters and has a range of 120 meters. The Growatt ShineLink-X data logger (MPN: ShineLink-X) is used for online monitoring and maintenance of a Growatt inverter. Memory data is recorded over a period of one month. Data protection plays a major role in wireless communication, so this information can be encrypted. The Growatt servers are based in Frankfurt.The ShineLink-X at a glanceMonitoring of up to 8 invertersRatio frequency communication120m rangePlug and playAutomatic IP addressingEncrypted dataBuilt-in memory for one monthCable-free, easy installationGrowatt Shine monitoring platformThe Growatt monitoring platform can be used with the ShineLink-X. This is available as a smartphone app (for iOS and Android) and as a web version. Use of the platform is free of charge. All Growatt products that are owned can be configured and monitored via Shine. It is also possible to display self-consumption and trends.Compatible inverter series:MIC 600-3300TL-XMIN 2500-4600TL-X/XH/XAMOD 3-15KTL3-X/XHMID 17-22KTL3-X/XHMID 25-40KTL3-XMAX 50-80KTL3 LVMAX 100-125KTL3 LVSPH 3000-6000TL BL-UPSPH 4000-10000TL3 BH-UPSPA 4000-10000TL3 BH-UPTechnical data:Communication: Rf433 - up to 120m (under free field conditions)Input voltage AC power supply: 196-250VDimensions: 105 x 85 x 26 mmWeight: 1kgMounting: Table or wall mounting possibleProtection class: IP30Status display: LEDOperating temperature range: -20°C - +65°CManufacturer's warranty: 1 yearScope of delivery:1x ShineLan Box1x ShineRF Stick-X1x network cable

The connection cable for the APX series from Growatt connects two battery towers of the system with each other. This ensures trouble-free communication between all components. The APX battery system The Growatt APX battery system has a modular design and additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5kWh and the BMS has a maximum (discharge) current of 13A or 26A. This means that a capacity of 5-30 kWh can be achieved and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which results in a more cost-effective battery, for example. Scope of delivery: 1x Growatt APX connection cable series connection

The TPM-E electricity meter from Growatt is a 3-phase complete solution for grid export limitation and self-consumption monitoring, the data of which can be read on an LCD display. It is characterized by high measurement accuracy and easy installation through plug and play. With RS485 communication and direct connections, the electricity meter is compatible with many Growatt inverters. Quick plug-and-play installationPrecise measurement of current consumptionFor three-phase systemsSupports zero export function with Growatt inverters Technical data Dimensions: 72 x 94.5 x 65 mmWeight: 398 gOperating temperature range: -25°C - +55°CStorage temperature range: -40°C - +70°CProtection class: IP51Power supply type: 3P4WInput voltage: 320-520V ACFrequency: 50/60 HzMax. Current: 100 ACommunication: RS485 Scope of delivery: 1x Growatt TPM-E 3-phase electricity meter

The NOAH2000 from Growatt (MPN: NOAH2000) is a LiFePO4 battery storage system for your balcony power station and impresses with its high cycle stability and self-heating function, among other things. With a nominal voltage of 51.2 V and a capacity of 2048 Wh, the battery provides you with outstanding performance under high loads. If required, you can flexibly expand the system to a total of up to 8192 Wh. Thanks to the advanced self-heating technology, the battery module also continues to work without any problems in winter environments at sub-zero temperatures. Of course, you can view and control everything in real time using the system monitoring app (ShinePhone). You can connect up to 4 solar modules with a maximum total output of 1800 W directly to the storage system. The storage system can be completed with the matching NEO 800M-X micro inverter. The NOAH2000 at a glance Self-heating functionCycles: 6000+Up to 4 battery modules (total 8192Wh)Up to 4 solar modules (total 1800W)App use - Growatt monitoring platformPlug and playModular and flexibleQuick and easy installation in 5 minutesManufacturer's warranty: 10 yearsCertifications: CE, ROHS, REACH Flexible expansion The NOAH2000 offers a high degree of flexibility thanks to its expandable configuration options, which range from 2048Wh to 8192Wh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Long cycle life The NOAH battery module is an ideal storage solution for your photovoltaic system due to its extremely long cycle life and the use of LiFePo4 cells. The Growatt storage system offers numerous advantages compared to conventional lead batteries and other lithium technologies. Ready for use within a few minutes The storage system uses the NEO 800M-X inverter and is compatible with MC4 connectors. Installation is very easy thanks to the plug-and-play principle. All you have to do is attach the micro inverter to the wall and connect the battery via a connection cable. You can connect up to 4 solar modules of up to 450W each with a total output of 1800W to one module using 2-way Y-connectors. The inputs are located directly on the NOAH2000. Use energy, reduce costs The system stores excess energy in the battery during the day and then makes it available whenever you need it to increase the efficiency of solar power use. Working modes Load First: Solar energy supplies the connected loads with top priority Battery First: Solar charging has top priority for the battery Technical data Battery type: LiFePO4Capacity: 2048 WhMax. Capacity: 8192 Wh (4 battery modules)Max. Charging power: 2000 WNominal voltage: 51.2 VMax. Charging current: 40 AMPPT efficiency: 99%Charging temperature range: 0 - +45°CDischarging temperature: -20 - +45°CProtection class: IP66Weight: 23 kgDimensions: 406 x 235 x 270 mm PV input Recommended PV input power: Max. 2 x 900 WMax. PV input voltage: 60 VMPPT voltage range: 16-60 VMPPT full power voltage range: 30-48 VMax. Input current: 26 A + 26 AMPP tracker: 2Strings per MPP tracker: 1 Battery output (DC to micro inverter) Max. Output power: 800 WOutput voltage range: 40-50 VMax. Output current: 20 A Scope of delivery: 1x Growatt NOAH2000 LiFePO4 battery module 2048Wh 4x extension cable for PV input 3m 2x DC output cable 3m 2x cable fuse 1x mounting bracket 1x MC4 mounting tool

This is a Growatt cable set for SPH inverters and ARK-2.5L-A1 LV . A power cable and a communication cable for easy plug-and-play installation of Growatt ARK-2.5L-A1 lithium battery and Growatt SPH 3000 and Growatt SPH3600 . This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set for ARK-2.5L-A1 LV? Then simply contact us by e-mail or telephone.

This Growatt cable set is a necessary connection cable between the ARK 2.5H-A1 HV battery units and the SPH inverters. The kit includes power cables and a communication cable for easy plug-and-play installation of the Growatt ARK 2.5H-A1 HV lithium battery and the Growatt SPH 6000-10000 3-phase hybrid inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or telephone.

Die Growatt ARK 2,5H-A2 Hochvolt Batterie (MPN ARK-2.5H-A2) ist ein LiFePO4-Speicher mit hoher Zyklenfestigkeit und langer Lebensdauer. Das modulare, stapelbare Konzept ermöglicht eine flexible Anwendung für verschiedene Szenarien und ist leicht zu installieren. Die Batterie bietet hervorragende Leistungen bei hoher Belastung und ist mit seinem IP65-Schutz auch für die Installation im Freien geeignet. Um Überspannungen im System zu vermeiden, kommt der Softstart zum Einsatz. Die A2-Version ist der Nachfolger der bisherigen ARK 2,5H-A1 und kann auch mit dieser problemlos kombiniert werden. Über die ARK 2,5H-A2-Batterie: Modulares, stapelbares BatteriekonzeptKobaltfreies Lithium-Eisenphosphat (LFP)Hohe Zyklenfestigkeit und lange LebensdauerWand- oder Bodeninstallation möglichSoftstart zum Schutz des Systems vor ÜberspannungenAutomatisches Aufwachen bei UnterspannungSchutzart IP65 für die Installation im FreienFerndiagnose und Firmware-Update Das ARK-Batteriesystem - Version A1 und A2 kombinierbar Durch das modulare Konzept ist das ARK-System flexibel einsetzbar und bei Bedarf erweiterbar. Ein Batterieturm kann mit mindestens 2 und bis zu 10 Speichermodule errichtet werden, es können auch mehrere Türme in einem System installiert werden. Hierbei kannst du die neue A2 mit der alten A1-Version problemlos kombinieren. Zum Betrieb wird pro Turm ein BMS-Steuerungselement, sowie ein Verbindungskabelset zum entsprechenden Wechselrichter benötigt. Zur Bodeninstallation ist zusätzlich eine Batterie-Basis pro Turm nötig. Die ARK-Hochvolt-Speicher sind mit den MIN- und MOD-XH, sowie den dreiphasigen SPH- und SPA-Wechselrichtern kompatibel. Je nach Inverter-Serie wird eine andere Steuerungseinheit, ein anderes Verbindungskabelset und eine unterschiedliche Startanzahl der Batterien benötigt. Das ARK-XH-System beginnt mit 2, das ARK-HV-System wiederum mit 3 Batterien. Einsatzgebiete Für netzgebundene, sowie autarke PhotovoltaikanlagenNotstromversorgungUnterbrechungsfreie Stromversorgungen (USV / UPS) Flexibel Erweitern Das ARK Batteriesystem von Growatt bietet eine hohe Flexibilität durch seine erweiterbaren Konfigurationsmöglichkeiten, die von 5,12 kWh bis zu 25,6 kWh reichen. Die Installation und Erweiterung des Systems gestaltet sich einfach und unkompliziert durch das modulare Design und die Verwendung von Kabeln. Eine weitere Innovation des ARK Systems ist, dass im Gegensatz zu anderen Batteriesystemen kein Batterieschrank benötigt wird. Lediglich eine Batteriebasis ist für einen stabilen Stand erforderlich. Softstart zum Schutz des Systems Der Softstart-Mechanismus ist eine Schutzfunktion, die bei der Growatt-Batterie zum Einsatz kommt, um das System vor Überspannungen zu schützen. Beim Starten oder Einschalten der Batterie wird die Stromversorgung allmählich erhöht, um das System vor Schäden zu bewahren, die durch eine plötzliche Spannungsspitze verursacht werden könnten. Auf diese Weise wird ein reibungsloser und sicherer Betrieb des Batteriesystems gewährleistet. Hohe Zyklen-Lebensdauer Die Growatt ARK Batteriemodule sind aufgrund ihrer extrem hohen Zyklen-Lebensdauer und der Verwendung von LiFePo4-Zellen eine ideale Speicherlösung für Photovoltaikanlagen. Unabhängig davon, ob es sich um ein netzgeführtes oder ein Inselsystem handelt, bietet der Growatt Speicher im Vergleich zu herkömmlichen Bleibatterien und anderen Lithium-Technologien zahlreiche Vorteile. Technische Daten: Batterie-Typ: Kobaltfreies Lithium-Eisenphosphat (LiFePo4)Energiekapazität: 2,56 kWhNutzbare Kapazität: 2,3 kWhNennspannung: 51,2 VBetriebsspannungsbereich: 47,2-56,8 VLade-/Entladestrom: 25 A/0,5 CSchutzart: IP65Temperaturbereich: -10~50° CAbmessung: 650 x 260 x 180 mmGewicht: ca. 28 kgZertifikate: IEC62619, CE, CEC, RCM, UN38.3 Lieferumfang: 1x Growatt ARK 2,5H-A2 2,56 kWh Hochvoltbatterie1x Batterieverbindungsset

The MID series Growatt inverters are particularly well suited for larger PV systems without memory.  They can be used for self-sufficiency or as full feeders.  The maximum output power of the inverter is 20,000W and the device is compatible with a photovoltaic system with the maximum size of 30kWp. The maximum efficiency of the inverter is 98.3%. The European efficiency of 97.5% takes into account typical weather conditions in Europe. The Growatt MID 20KTL3-X1 is transformerless and therefore works particularly efficiently. The inverter contains three MPP trackers, meaning three independent strings can be connected. This is important if the PV system consists of differently arranged surfaces, for example when oriented east-west. A 3-phase smart meter is still required to operate the Growatt MID 20KTL3-X1 and is not included. High safety is an important aspect and is achieved through several features such as built-in DC switch, surge protection, reverse polarity protection and many other protection mechanisms. Specifications: Efficiency up to 98.75%Mpp voltage range: 250V - 1100VMax. output power: 20 000 WMax. output current: 26 A x 3 Max. size of PV system: 30 000 WMaximum input current: 27 A (via MPP Tracker)Own consumption night: <1WMpp Tracker: 3Number of phases: 3DC connection: H4/MC4 (Optional)Built-in DC switch for solar cellsIP66Dimensions (L x W x H) - 580 x 435 x 230 [mm]Weight: 30 kg Installation of the inverter We always recommend that you contact an authorized electrician if you want your inverter connected to ensure safe and legal installation.  Guarantee: 10-year Growatt warranty (see warranty terms for downloads) Scope of delivery:  1x Growatt MID 20KTL3-X1 Inverter

With the Growatt MIC 600TL-X string inverter (MPN: MIC 600TL-X), we offer a single-phase inverter that combines high yields with user-friendliness. It is particularly suitable for small PV systems and delivers up to 600W AC output power. Simply connect it to your solar system via the MC4 connection and you're ready to go. This allows you to cover part of your electricity requirements cost-effectively.The device can also be monitored and configured on the move using the Shine app or web application via an optional WLAN module.The Growatt MIC inverter at a glanceSingle-phase operationMaximum power point trackingConnect directly to photovoltaic modulesTouch button and OLED displayCompact design and easy installation10-year manufacturer's warrantyOptionally possible: monitoring with the Shine platform (chargeable accessory required)Why a string inverter?The output of solar modules varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur as soon as the output of a panel in a row is lower, resulting in lower electricity production for the entire row. A string inverter can reduce these losses.Maximum Power Point TrackingMaximum Power Point Tracking technology is used to generate the best possible yield from a solar system. The MPPT of the MIC inverter sets the optimum ratio between voltage and current over the course of the day, depending on the solar radiation and the temperature of the solar modules. The wide MPPT voltage range means that a large number of solar modules can be connected and this enables efficient energy yield, the advantage of which is most noticeable when the sky is partially overcast and the light intensity is constantly changing.Flexible and easy installationThanks to its compact dimensions and low weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connections, the connection from the solar supply to the inverter is also completed in just a few moments. The numerous protective functions ensure safe and smooth operation of the solar system.Protective devicesDC reverse polarity protectionDC disconnectorDC / AC surge arrester: type IIIInsulation resistance detectionEarth fault, mains and residual current monitoringAC short-circuit protectionIsolated network detectionAFCI protectionTechnical datamax. PV power: 1050Wmax. input voltage: 500VStart voltage: 50VNominal DC voltage: 120VMPPT voltage range: 50V-500VNominal AC power: 600WNominal AC voltage: 230VMax. Efficiency: 96.5%Operating temperature range: -25°C - +60°CProtection class: IP65Weight: 6kgDimensions (H/W/D): 274 x 254 x 138 mmScope of delivery:1x Growatt MIC 600TL-X inverter1x mounting bracket1x operating instructions

With the Growatt MIC 800TL-X string inverter (MPN: MIC 800TL-X), we offer a single-phase inverter that combines high yields with user-friendliness. It is particularly suitable for small PV systems and delivers up to 800W AC output power. Simply connect it to your solar system via the MC4 connection and you're ready to go. This allows you to cover part of your electricity requirements cost-effectively.The device can also be monitored and configured on the move using the Shine app or web application via an optional WLAN module. The Growatt MIC inverter at a glance Single-phase operationMaximum power point trackingConnect directly to photovoltaic modulesTouch button and OLED displayCompact design and easy installation10-year manufacturer's warrantyOptionally possible: monitoring with the Shine platform (chargeable accessory required) Why a string inverter? The output of solar modules varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur as soon as the output of a panel in a row is lower, resulting in lower electricity production for the entire row. A string inverter can reduce these losses. Maximum Power Point Tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a solar system. The MPPT of the MIC inverter sets the optimum ratio between voltage and current over the course of the day, depending on the solar radiation and the temperature of the solar modules. The wide MPPT voltage range means that a large number of solar modules can be connected and this enables efficient energy yield, the advantage of which is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and low weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connections, the connection from the solar supply to the inverter is also completed in just a few moments. The numerous protective functions ensure safe and smooth operation of the solar system. Protective devices DC reverse polarity protectionDC disconnectorDC / AC surge arrester: type IIIInsulation resistance detectionEarth fault, mains and residual current monitoringAC short-circuit protectionIsolated network detectionAFCI protection Technical data max. PV power: 1120Wmax. input voltage: 500VStart voltage: 50VNominal DC voltage: 120VMPPT voltage range: 50V-500VNominal AC power: 800WNominal AC voltage: 230VMax. Efficiency: 96.5%Operating temperature range: -25°C - +60°CProtection class: IP65Weight: 6kgDimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt MIC 800TL-X inverter1x mounting bracket1x operating instructions

The Growatt THOR 22AS-S EV charger is compatible with all well-known electric vehicle manufacturers thanks to its type 2 connection and has an output power of 22kW. Intelligent charging with solar power Maximize the benefits of your PV system and get the greatest safety with optimal protection. Smart load management allows you to safely charge your electric car with 100% renewable energy from surplus solar power without tripping the fuse or exceeding the power limit. The charging power can automatically and dynamically adapt to the electricity currently provided by the sun. If it is cloudy, for example, the THOR EV reduces the charging speed and, conversely, increases the charging speed when the sun is shining. This also protects the home network from overloading. The minimum charging speed is 4.1 kW and the maximum charging speed is 22 kW. If you only generate 2 kW from the solar system, for example, the THOR charger will not start charging your electric car unless you activate "Import from Grid" in the ShinePhone app, after which the difference between the self-generated power (e.g. 2 kW) and 4.1 kW is imported from the grid. Versatile protection devices The Growatt THOR 22AS-S Wallbox offers many protective devices for your overall system. These include overvoltage protection, undervoltage protection, overload protection, short-circuit protection, lightning protection and overtemperature protection. Functions of the charger Thanks to its IP65 protection class, the Growatt THOR 22AS-S EV charger can be used indoors and outdoors and can be easily controlled via an app using intelligent controls. The charger can be integrated with existing and newly installed PV systems. It has an LED indicator light, several operating modes and an emergency stop button. Installation For installation, use the installation instructions available in the download area and get help from a qualified electrician. We do NOT provide support for the installation of this charger. Scope of delivery The Growatt THOR 22AS-S EV charger comes with an RFID card and a 5 meter connection cable (For PV surplus charging, the 3-phase Growatt Smartmeter is additionally required and is not included in the scope of delivery) Warranty: The manufacturer's warranty is three years (see Growatt warranty in Downloads)

The new GrowattAPX98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. What is important is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature The APX battery system Thanks to its modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be set up with a minimum of one to a maximum of 6 storage modules. One power module per tower is required for operation. This must be purchased separately. An additional base is required for ground mounting. Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15 kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Scope of delivery: 1x Growatt APX 98034-P2 BMS

The SPM-E electricity meter from Growatt is a complete 1-phase solution for grid export limitation and self-consumption monitoring, whose data can be read on an LCD display. It is characterized by high measurement accuracy and simple installation through plug and play. With RS485 communication and direct connections, the electricity meter is compatible with many Growatt inverters. Quick plug-and-play installationPrecise measurement of current consumptionFor single-phase systemsSupports zero export function with Growatt inverters Technical data Dimensions: 36 x 99 x 63 mmWeight: 223 gOperating temperature range: -25°C - +55°CStorage temperature range: -40°C - +70°CProtection class: IP51Current type: 1P2WInput voltage: 184 - 276V ACFrequency: 50/60 HzMax. Current: 100 ACommunication: RS485 Scope of delivery: 1x Growatt SPM-E 1-phase electricity meter

The Growatt SPH4000TL BL-UP hybrid inverter supports solar modules with an output of up to 7600W. It offers a scalable system configuration and a UPS function with a switchover time of 10ms. In addition, the single-phase inverter enables intelligent load management via a potential-free contact. With these functions, the inverter offers a flexible and reliable solution for solar projects. About the SPH4000TL BL-UP inverter Two MPP trackers (Maximum Power Point)UPS function, 10ms switching timeIntelligent load management via potential-free contactScalable system configurationVPP interface readyIntelligent remote monitoring and maintenanceSupports lithium and lead-acid batteriesDC/AC ratio up to 1.5LCD+LED displayComplies with CE, VDE0126-1-1, etc. Hybrid inverter Compared to conventional inverters, hybrid inverters offer the option of not only feeding the generated solar power into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by primarily using the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the SPH inverter. When entered directly on the device, a priority mode can only be set for one period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid.Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated.Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any grid voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt SPH automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the solar system and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking By using Maximum Power Point Tracking (MPPT) technology, the optimum yield is achieved in a solar system. The MIC inverter has an MPPT that sets the ideal ratio between voltage and current during the course of the day according to the solar radiation and the module temperature of the solar modules. Thanks to the wide MPPT voltage range, many solar modules can be connected, which enables efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated intelligent load management enables efficient and precise control of energy consumption. Electrical loads can be intelligently controlled and prioritized via the potential-free contact. This function makes it possible to automatically detect the energy demand and make optimum use of the available energy. Intelligent load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your solar system. Growatt monitoring platform The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) as well as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends.The following Shine options are compatible with the SPH series: ShineWiFi-XShineLink-XShine4G-XShineMaster Technical data Recommended module power: up to 7600 WMax. DC voltage: 550 VStarting voltage: 120 VMPPT voltage range: 120-550 V/360 VBattery voltage range: 42~59 VMax. Charge/discharge current: 85 AContinuous charge/discharge power: 4000 WAC rated power: 4000 WMax. Apparent power: 4000 VAMax. AC output power: 4000 WMax. Output current: 17.4 AAC nominal voltage range: 230V (180Vac-270Vac)AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz)Housing classification: IP65Manufacturer's warranty: 10 yearsMaximum efficiency of 97.3%Dimensions: 420 x 560 x 180mmWeight: 31 kg Scope of delivery 1x Growatt SPH4000TL BL-UP inverter

With the Growatt MIC 750TL-X string inverter (MPN: MIC 750TL-X), we offer a single-phase inverter that combines high yields with user-friendliness. It is particularly suitable for small PV systems and delivers up to 750W AC output power. Simply connect it to your solar system via the MC4 connection and you're ready to go. This allows you to cover part of your electricity requirements cost-effectively. The device can also be monitored and configured on the move using the Shine app or web application via an optional WLAN module. The Growatt MIC inverter at a glance Single-phase operationMaximum power point trackingConnect directly to photovoltaic modulesTouch button and OLED displayCompact design and easy installation10-year manufacturer's warrantyOptionally possible: monitoring with the Shine platform (chargeable accessory required) Why a string inverter? The output of solar modules varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur as soon as the output of a panel in a row is lower, resulting in lower electricity production for the entire row. A string inverter can reduce these losses. Maximum Power Point Tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a solar system. The MPPT of the MIC inverter sets the optimum ratio between voltage and current over the course of the day, depending on the solar radiation and the temperature of the solar modules. The wide MPPT voltage range means that a large number of solar modules can be connected and this enables efficient energy yield, the advantage of which is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and low weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connections, the connection from the solar supply to the inverter is also completed in just a few moments. The numerous protective functions ensure safe and smooth operation of the solar system. Protective devices DC reverse polarity protectionDC disconnectorDC / AC surge arrester: type IIIInsulation resistance detectionEarth fault, mains and residual current monitoringAC short-circuit protectionIsolated network detectionAFCI protection Technical data max. PV power: 1050Wmax. input voltage: 500VStart voltage: 50VNominal DC voltage: 120VMPPT voltage range: 50V-500VNominal AC power: 750WNominal AC voltage: 230VMax. Efficiency: 97.4%Operating temperature range: -25°C - +60°CProtection class: IP65Weight: 6kgDimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt MIC 750TL-X inverter1x mounting bracket1x operating instructions

The Shine Lan-X data logger enables a secure and direct Ethernet connection between Growatt inverters and the Internet router. This makes it easy to monitor and maintain installed Growatt devices online. The data from the connected Growatt inverters is stored on the Shine LAN-X data logger for up to one month. The data transfer rate of the USB port is up to 12 Mbps and up to 10 Mbps via the LAN connection. Plug&PlayNo configurationImmediately ready for operation

With the Growatt MIC 3300TL-X string inverter (MPN: MIC 3300TL-X), we offer a single-phase inverter that combines high yields with user-friendliness. It is particularly suitable for small PV systems and delivers up to 3300W AC output power. Simply connect it to your solar system via the MC4 connection and you're ready to go. This allows you to cover part of your electricity requirements cost-effectively.The device can also be monitored and configured on the move using the Shine app or web application via an optional WLAN module. The Growatt MIC inverter at a glance Single-phase operationMaximum power point trackingConnect directly to photovoltaic modulesTouch button and OLED displayCompact design and easy installation10-year manufacturer's warrantyOptionally possible: monitoring with the Shine platform (chargeable accessory required) Why a string inverter? The output of solar modules varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur as soon as the output of a panel in a row is lower, resulting in lower electricity production for the entire row. A string inverter can reduce these losses. Maximum Power Point Tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a solar system. The MPPT of the MIC inverter sets the optimum ratio between voltage and current over the course of the day, depending on the solar radiation and the temperature of the solar modules. The wide MPPT voltage range means that a large number of solar modules can be connected and this enables efficient energy yield, the advantage of which is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and low weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connections, the connection from the solar supply to the inverter is also completed in just a few moments. The numerous protective functions ensure safe and smooth operation of the solar system. Protective devices DC reverse polarity protectionDC disconnectorDC / AC surge arrester: type IIIInsulation resistance detectionEarth fault, mains and residual current monitoringAC short-circuit protectionIsolated network detectionAFCI protection Technical data max. PV power: 4290Wmax. input voltage: 550VStart voltage: 80VNominal DC voltage: 360VMPPT voltage range: 65V-550VNominal AC power: 3300WNominal AC voltage: 230VMax. Efficiency: 97.6%Operating temperature range: -25°C - +60°CProtection class: IP65Weight: 6kgDimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt MIC 3300TL-X inverter1x mounting bracket1x operating instructions

Der Growatt MOD 4KTL3-XH Hybrid-Inverter (MPN MOD 4KTL3-XH) ist ein 3-phasiger Wechselrichter, der mit seiner hohen Leistung und seiner Kompaktheit für einen einfachen und benutzerfreundlichen Betrieb großer Solaranlagen sorgt. Der Inverter zeichnet sich durch einen hohen Wirkungsgrad von 98,3 % aus, was ihn zu einem leistungsstarken und flexiblen Gerät bei der Konfiguration einer Anlage macht. Neben 2 unabhängigen MPPT-Eingängen und einer maximalen PV-Leistung von 8000W, verfügt der Wechselrichter auch über ein OLED-Touch-Display, was von großen Vorteil für eine einfache und unkomplizierte Bedienung ist. Zusätzlich lassen sich Lasten und Batterien anschließen. Hierzu kompatibel ist das ARK XH Batteriesystem von 7,68-25,6 kWh. Die MOD-XH Serie: 2 unabhängige MPPTsBattery-ready, zukunftssicherTyp II SPD auf DC- und AC-SeiteIntegrierte AFCI-FunktionUnterstützung der ExportbegrenzungOLED und Touch TasteDC/AC-Verhältnis bis zu 2,0 Hybrid-Wechselrichter Im Gegensatz zu herkömmlichen Wechselrichtern können Hybrid-Wechselrichter den erzeugten Strom aus der Solaranlage nicht nur in das Stromnetz einspeisen, sondern auch in Batterien speichern. Dadurch wird der Solarstrom auch dann verfügbar, wenn die Sonne nicht scheint. Ein weiteres Merkmal von Hybrid-Wechselrichtern ist ihre Fähigkeit, den Stromverbrauch eines Haushalts zu optimieren, indem sie den Solarstrom bevorzugt direkt im Haushalt nutzen, bevor er ins Netz eingespeist wird.  Aktive Sicherheit mit AFCI-Funktion Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen.  Umgangssprachlich wird der AFCI auch Brandschutzschalter genannt, da durch eigehende Signale Überhitzungen an schlechten Kontaktstellen oder bei Überschlägen zwischen zwei Leitern, Brände verhindert werden können. Zwei MPP-Tracker für optimale Solar-Erträge Mit der Maximum Power Point Tracker Technologie wird der bestmögliche Ertrag einer Solaranlage generiert. Der MPPT stellt dabei im Tagesverlauf das optimale Verhältnis zwischen Bestrahlungsstärke, Temperatur am Modul und Solarzellentyp fest. Durch die zwei MPP-Tracker im MOD-Inverter kann der optimale Arbeitspunkt für die zwei PV-Stränge getrennt voneinander optimiert werden. Die beiden Tracker arbeiten unabhängig voneinander und so hätte z.B. eine Verschattung bei einem Strang keinen Einfluss auf den zweiten. Betriebs-Modi - Je nach System-Anforderungen konfigurierbar Arbeitsmodus: Der MOD-XH wandelt die DC-Leistung von PV-Strings in AC-Leistung um und speist diese in das Stromnetz ein. Sobald die Ausgangsleistung nicht den Anforderungen für die netzgekoppelte Stromerzeugung entspricht, wird der normale Betriebsmodus abgeschaltet.Fehlermodus: Der Wechselrichter überwacht und regelt den Zustand des Systems in Echtzeit. Wenn z. B. System- oder Wechselrichterfehler auftreten, zeigt das Display die Fehlerinformationen an und trennt den Wechselrichterausgang vom Netz.Abschaltmodus: Bei schwacher oder fehlender Sonneneinstrahlung schaltet der Wechselrichter automatisch ab. AC&DC Typ II SPD AC- und DC-Typ II SPDs (Surge Protective Devices) schützen Netz-Inverter vor Überspannungen und sind eine wichtige Komponente für die Sicherheit und Zuverlässigkeit von Solaranlagen. AC-SPDs schützen die Wechselstromseite und DC-SPDs die Gleichstromseite des Inverters. Diese Schutzeinrichtungen leiten überschüssige Spannungsimpulse ab, die durch Blitzschläge, Schaltvorgänge im Stromnetz oder andere Ereignisse verursacht werden können. Zahlreiche Schutzfunktionen DC- / AC-Überspannungsableiter: Typ IIDC-Verpolungsschutz und -TrennschalterIsolationswiderstandserkennungAC-KurzschlussschutzNetz-, Fehlerstrom- und String-ÜberwachungInselnetzerkennungAFCI-Schutz (Fehlerlichtbogenerkennung) Growatt Überwachungsplattform (nutzbar mit optionalem Zubehör) Mit dem optionalen Zubehör der Shine-Serie kann die Growatt Monitoring-Plattform genutzt werden. Diese ist als Smartphone-App (für iOS und Android), als auch in einer Webversion verfügbar. Das Shine-Zubehör muss separat erworben werden, die Nutzung der Plattform ist kostenfrei. Über Shine kann können Sie all Ihre Growatt-Produkte konfigurieren und überwacht werden, die Anzeige des Eigenverbrauchs und Trends ist ebenfalls möglich.Zur MOD 3-15KTL3-X/XH-Serie sind folgende Shine-Optionen kompatibel: ShineWiFi-XShine4G-XShineLan-XShineLink-X Technische Daten Eingang (DC) Max. PV-Leitung: 8000WMax. Eingangsspannung: 1100VStart-Spannung: 160VNennspannung: 600VMPPT-Spannungsbereich: 140-1000VMax. Eingangsstrom pro MPPT: 16AMax. Kurzschlussstrom pro MPPT: 20A Eingang (DC-Batterie) Kompatibel mit ARK XH BatteriesystemBetriebsspannungsbereich: 600-950VMax. Betriebsstrom: 11AMax. Ladeleistung: 6000WMax. Entladeleistung: 4400W Ausgang (AC) AC-Nennleistung: 4000WAC-Nennspannungsbereich: 220V/380V, 230V/400V (340-44V0)Frequenzbereich: 50/60 Hz (45-55Hz/55-65Hz)Max. Ausgangsstrom: 6,7A Allgemein Max. Wirkungsgrad: 98,3%Abmessungen: 425 x 387 x 147 mmGewicht: 12,5 kgBetriebstemperaturbereich: -25°C - +60°CSchutzklasse: IP66Herstellergarantie: 5 Jahre Lieferumfang 1x Growatt MOD 4KTL3-XH Hybrid-Wechselrichter

The Growatt SPF 3500 ES Off-Grid Inverter is one of the best off-grid inverters on the market, which is ideal for stand-alone systems (e.g. summer house or allotment, etc.). With this 3500 W inverter, you can keep several devices running at the same time. Of course, the inverter has a built-in MPPT tracker so that you can get the maximum benefit from your solar panels. It is possible to connect external power to the off-grid inverter either from the mains or a gasoline generator in case the battery is discharged and the solar panels are not providing the required power. The Growatt SPF 3500 ES is suitable for a maximum panel voltage of 450 V DC and can be used with or without a battery (48V). If you want to use a battery, you can either use the appropriate ones from Growatt (Growatt ARK LV or GBLI6532) or you can assemble a 48V battery yourself, for example from 4 x 12 V or 2 x 24 V. If the capacity of a single SPF 3500 ES is not large enough, you can connect up to six units in parallel to increase the total output to up to 21kWh. The integrated MPPT charge controller optimizes the charging and discharging of the battery. Charging priorities can be set, e.g. charging from the solar system is preferred to charging from the grid if solar power is available. The inverter can be monitored via WLAN. You can use the separately available "Wi-Fi-F dongle" for this purpose. Growatt offers an intelligent online service for remote troubleshooting of technical problems and updates. As a Growatt customer, customer service is available to you around the clock, 365 days a year. This means that you can intervene yourself in the event of a fault and rectify it with the help of customer service. These functions and services make the inverter a safe choice for your solar system. Installing the inverter Detailed installation instructions can be found in the download section. We do not offer technical support for the Growatt SPF 3500 ES off-grid inverter and self-built battery systems etc. Instead, read the Growatt manual and consult an electrician if necessary. Warranty: 2 year manufacturer's warranty Scope of delivery: 1x SPF 3500 ES off-grid inverter

The Growatt MOD 3KTL3-XH hybrid inverter (MPN MOD 3KTL3-XH) is a 3-phase inverter that ensures simple and user-friendly operation of large solar systems thanks to its high performance and compact size. The inverter is characterized by a high efficiency of 98.3 %, which makes it a powerful and flexible device when configuring a system. In addition to 2 independent MPPT inputs and a maximum PV power of 6000W, the inverter also has an OLED touch display, which is a great advantage for simple and uncomplicated operation. Loads and batteries can also be connected. The ARK XH battery system from 7.68-25.6 kWh is compatible with this. The MOD-XH series: 2 independent MPPTsBattery-ready, future-proofType II SPD on DC and AC sideIntegrated AFCI functionSupport for export limitationOLED and touch buttonDC/AC ratio up to 2.0 Hybrid inverters In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the solar system into the grid, but also store it in batteries. This means that the solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before feeding it into the grid. Active safety with AFCI function An Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. In addition to providing protection, it analyzes current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. Colloquially, the AFCI is also known as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a solar system. The MPPT determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the MOD Inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Operating modes - configurable according to system requirements Working mode: The MOD-XH converts the DC power from PV strings into AC power and feeds this into the power grid. As soon as the output power does not meet the requirements for grid-connected power generation, the normal operating mode is switched off.Fault mode: The inverter monitors and regulates the status of the system in real time. For example, if system or inverter faults occur, the display shows the fault information and disconnects the inverter output from the grid.Switch-off mode: The inverter switches off automatically when solar radiation is weak or absent. AC&DC Type II SPD AC and DC Type II SPDs (Surge Protective Devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of solar systems. AC SPDs protect the AC side and DC SPDs protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions DC / AC surge arrester: Type IIDC reverse polarity protection and disconnectorInsulation resistance detectionAC short-circuit protectionMains, residual current and string monitoringIslanding detectionAFCI protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can use Shine to configure and monitor all your Growatt products and display self-consumption and trends.The following Shine options are compatible with the MOD 3-15KTL3-X/XH series: ShineWiFi-XShine4G-XShineLan-XShineLink-X Technical data Input (DC) Max. PV line: 6000WMax. Input voltage: 1100VStart voltage: 160VNominal voltage: 600VMPPT-Spannungsbereich: 140-1000VMax. Input current per MPPT: 16AMax. Short-circuit current per MPPT: 20A Input (DC battery) Compatible with ARK XH battery systemOperating voltage range: 600-950VMax. Operating current: 11AMax. Charging power: 6000WMax. Discharge power: 3300W Output (AC) Rated AC power: 3000WNominal AC voltage range: 220V/380V, 230V/400V (340-44V0)Frequency range: 50/60 Hz (45-55Hz/55-65Hz)Max. Output current: 5A general Max. Efficiency: 98.3%Dimensions: 425 x 387 x 147 mmWeight: 12.5 kgOperating temperature range: -25°C - +60°CProtection class: IP66Manufacturer's warranty: 5 years Scope of delivery 1x Growatt MOD 3KTL3-XH hybrid inverter

The Growatt SPH3000TL BL-UP hybrid inverter supports solar systems with a total output of up to 6000W. It offers a scalable system configuration and an uninterruptible power supply with a switchover time of 10ms. In addition, the single-phase inverter enables intelligent load management via a potential-free contact. With these functions, the inverter offers a flexible and reliable solution for solar projects. About the SPH3000TL BL-UP inverter Two MPP trackers (Maximum Power Point)UPS function, 10ms switching timeIntelligent load management via potential-free contactScalable system configurationVPP interface readyIntelligent remote monitoring and maintenanceSupports lithium and lead-acid batteriesDC/AC ratio up to 1.5LCD+LED displayComplies with CE, VDE0126-1-1, etc. Hybrid inverter Compared to conventional inverters, hybrid inverters offer the option of not only feeding the generated solar power into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by primarily using the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the SPH inverter. When entered directly on the device, a priority mode can only be set for one period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid.Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated.Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any grid voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt SPH automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the solar system and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking By using Maximum Power Point Tracking (MPPT) technology, the optimum yield is achieved in a solar system. The MIC inverter has an MPPT that sets the ideal ratio between voltage and current during the course of the day according to the solar radiation and the module temperature of the solar modules. Thanks to the wide MPPT voltage range, many solar modules can be connected, which enables efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated intelligent load management enables efficient and precise control of energy consumption. Electrical loads can be intelligently controlled and prioritized via the potential-free contact. This function makes it possible to automatically detect the energy demand and make optimum use of the available energy. Intelligent load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your solar system. Growatt monitoring platform The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) as well as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends.The following Shine options are compatible with the SPH series: ShineWiFi-XShineLink-XShine4G-XShineMaster Technical data Recommended module power: up to 6000 WMax. DC voltage: 550 VStarting voltage: 120 VMPPT voltage range: 120-550 V/360 VBattery voltage range: 42~59 VMax. Charge/discharge current: 66 AContinuous charge/discharge power: 3000 WAC rated power: 3000 WMax. Apparent power: 3000 VAMax. AC output power: 3000 WMax. Output current: 17.4 AAC nominal voltage range: 230V (180Vac-270Vac)AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz)Housing classification: IP65Manufacturer's warranty: 10 yearsMaximum efficiency of 97.2%Dimensions: 420 x 560 x 180mmWeight: 31 kg Scope of delivery 1x Growatt SPH3000TL BL-UP inverter

Der Growatt MID 11KTL3-XH Hybrid-Wechselrichter ist ein 3-phasiges Kraftpaket, der mit erstaunlicher Leistung und seiner vielseitigen Funktionen große Solaranlagen mühelos in Betrieb nimmt. Der Inverter zeichnet sich neben einem hohen Wirkungsgrad von 98,75% auch durch seine Kompaktheit und Benutzerfreundlichkeit aus. Das macht ihn zu einen treuen Partner bei der Konfiguration einer Anlage. Der Wechselrichter trumpft mit 2 unabhängigen MPPT-Eingängen auf und kann eine beeindruckende PV-Leistung von 22000W bewältigen. Für die Bedienung ist er mit einem OLED-Touch-Display ausgestattet, was für eine spielend leichte und unkomplizierte Steuerung sorgt. Darüber hinaus bietet der Inverter die Möglichkeit, Lasten und Batterien anzuschließen. Hierzu kompatibel ist das APX-Batteriesystem von Growatt. Optional kann die MID-XH - Serie mit der SYN 100 XH 30 - Backup-Box kombiniert werden, um einen Offgrid-Betrieb zu erreichen. Die MID-XH Serie: 2 unabhängige MPPTsBattery-ready, zukunftssicherTyp II SPD auf DC- und AC-SeiteIntegrierte AFCI-FunktionOLED, LED und Touch TasteDC/AC-Verhältnis bis zu 2,024h Eigenverbrauchs-Monitoring10 Jahre Herstellergarantie Hybrid-Wechselrichter Im Gegensatz zu herkömmlichen Wechselrichtern können Hybrid-Wechselrichter den erzeugten Strom aus der Solaranlage nicht nur in das Stromnetz einspeisen, sondern auch in Batterien speichern. Dadurch wird der Solarstrom auch dann verfügbar, wenn die Sonne nicht scheint. Ein weiteres Merkmal von Hybrid-Wechselrichtern ist ihre Fähigkeit, den Stromverbrauch eines Haushalts zu optimieren, indem sie den Solarstrom bevorzugt direkt im Haushalt nutzen, bevor er ins Netz eingespeist wird.  Aktive Sicherheit mit AFCI-Funktion Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen.  Umgangssprachlich wird der AFCI auch Brandschutzschalter genannt, da durch eigehende Signale Überhitzungen an schlechten Kontaktstellen oder bei Überschlägen zwischen zwei Leitern, Brände verhindert werden können. Zwei MPP-Tracker für optimale Solar-Erträge Mit der Maximum Power Point Tracker Technologie wird der bestmögliche Ertrag einer Solaranlage generiert. Der MPPT stellt dabei im Tagesverlauf das optimale Verhältnis zwischen Bestrahlungsstärke, Temperatur am Modul und Solarzellentyp fest. Durch die zwei MPP-Tracker im MID-Inverter kann der optimale Arbeitspunkt für die zwei PV-Stränge getrennt voneinander optimiert werden. Die beiden Tracker arbeiten unabhängig voneinander und so hätte z.B. eine Verschattung bei einem Strang keinen Einfluss auf den zweiten. Betriebs-Modi - Je nach System-Anforderungen konfigurierbar Arbeitsmodus: Wenn die Anforderungen für di Netzverbindung erfüllt sind - die Gleichstromspannung ist größer als 200V und die Netzspannung und -Frequenz liegen im zulässigen Bereich, wird der Wechselrichter die von den Solarpanelen erzeugte Gleichstromleistung in Wechselstromleistung umwandeln und sie mit der grünen LED-Anzeige ins Netz einspeisen. Wenn die Gleichstromspannung unter 160V fällt, wird der Wechselrichter automatisch von der Netzverbindung getrennt und den Betriebsmodus verlassen. Er wird automatisch in den Betriebsmodus zurückkehren und sich wieder mit dem Netz verbinden, sobald die Anforderungen erfüllt sind. Fehlermodus: Wenn eine unerwartete Situation auftritt, wie zum Beispiel ein Systemausfall oder ein Wechselrichterausfall, wird der Wechselrichter die Fehlermeldung auf den Bildschirm anzeigen. Im Fehlermodus wird die blattförmige Anzeige rot leuchten und der Wechselrichter wird vom netz getrennt. Abschaltmodus: Wenn die PV-Leistung unzureichend ist oder keine PV-Leistung erzeugt wird, wird der Wechselrichter automatisch heruntergefahren. Im Abschaltmodus verbraucht der Wechselrichter keine Energie aus dem netz oder den Solarpanelen und das Display, sowie die Anzeigen werden ausgeschaltet. AC&DC Typ II SPD AC- und DC-Typ II SPDs (Surge Protective Devices) schützen Netz-Inverter vor Überspannungen und sind eine wichtige Komponente für die Sicherheit und Zuverlässigkeit von Solaranlagen. AC-SPDs schützen die Wechselstromseite und DC-SPDs die Gleichstromseite des Inverters. Diese Schutzeinrichtungen leiten überschüssige Spannungsimpulse ab, die durch Blitzschläge, Schaltvorgänge im Stromnetz oder andere Ereignisse verursacht werden können. Zahlreiche Schutzfunktionen DC- / AC-Überspannungsableiter: Typ IIDC-Verpolungsschutz und -TrennschalterIsolationswiderstandserkennungAC-KurzschlussschutzNetz-, Fehlerstrom- und String-ÜberwachungInselnetzerkennungAFCI-Schutz (Fehlerlichtbogenerkennung) Growatt Überwachungsplattform Durch die Verwendung des optionalen Zubehörs aus der Shine-Serie kann die Growatt Monitoring-Plattform genutzt werden. Diese ist sowohl als Smartphone-App für iOS und Android als auch als Webversion verfügbar. Das Shine-Zubehör muss separat erworben werden, die Nutzung der Plattform ist jedoch kostenlos. Mit Shine kannst du alle Ihre Growatt-Produkte konfigurieren und überwachen sowie deinen Eigenverbrauch und Trends anzeigen lassen. Mit der MID-XH-Serie sind folgende Shine-Optionen kompatibel: Shine WiFi-XShineLan-XShineLink-X Technische Daten Eingang (DC) Max. PV-Leistung: 22000WMax. Eingangsspannung: 1100VStart-Spannung: 200VNennspannung: 600VMPPT-Spannungsbereich: 160-1000VMax. Eingangsstrom pro MPPT: 32AMax. Kurzschlussstrom pro MPPT: 40AAnzahl unabhängige MPPT: 2 Eingang (DC-Batterie) Kompatibel mit APX HV BatteriesystemBetriebsspannungsbereich: 600-980VMax. Betriebsstrom: 25A pro AnschlussMax. Ladeleistung: 15000W pro AnschlussMax. Entladeleistung: 11000W Ausgang (AC) AC-Nennleistung: 11000WMax. AC-Betriebsleistung: 12100VAAC-Nennspannungsbereich: 220V/380V, 230V/400V (340-440V)Frequenzbereich: 50/60 Hz (45-55Hz/55-65Hz)Max. Ausgangsstrom: 18,3A Allgemein Max. Wirkungsgrad: 98,75%Abmessungen: 580 x 435 x 230 mmGewicht: 31 kgBetriebstemperaturbereich: -25°C - +60°CSchutzklasse: IP66Herstellergarantie: 10 Jahre

Die Anker Solarbank 2 E1600 Plus (MPN A17C33Z1) ist ein All-in-One Speicher mit 2 MPP-Trackern und max. 1200W Leistung für dein Balkonkraftwerk. Speichere die Solarenergie im 1600Wh-Akku und versorge dein Zuhause mit 800W AC-Leistung. Die Gerätekombination integriert in seinem schlanken Design sowohl Mikrowechselrichter, PV-Hub als auch Akku in einem. Der modulare Aufbau sorgt für einfache Installation, ohne Bohren oder Kabelsalat. Mit der erweiterbaren Kapazität auf bis zu 9,6 kWh und der Thermal Boosting Technology garantiert sie eine zuverlässige und effiziente Energieversorgung. Sie ermöglicht dir eine jährliche Stromkosteneinsparung von bis zu 231€* und sorgt somit für eine erhebliche Reduzierung deiner Energiekosten. Erlebe die Zukunft der Energiegewinnung mit der Anker Solarbank 2 E1600 Plus und sichere dir eine nachhaltige Energiequelle mit langer Lebensdauer für dein Zuhause. Höchste Flexibilität und Zuverlässigkeit All-in-One Design2 MPP-Tracker<3s ReaktionszeitLeistungsanpassung innerhalb von 10W6000 LadezyklenThermal Boosting TechnologyEnergiemanagement mit der Anker-AppBis zu 231€ Stromkosten sparen*Bis zu 9,6kWh erweiterbar (max. 5 zusätzliche Batterien)Konnektivität: Bluetooth, Wlan10 Jahre Herstellergarantie * Im Vergleich zu einer PV-Anlage ohne Speicher. Berechnet mit 870W Solarleistung, optimaler Modulausrichtung, bestmöglichen Wetterbedingungen, entsprechender Grundlast und 0,40/kWh Strompreis. All-in-One-Design Mit dieser All-in-One-Solarlösung musst du keine zusätzlichen Zubehörteile kaufen oder dich um Kompatibilitätsprobleme sorgen. Dieses System bietet zuverlässige Leistung und ermöglicht dir die unmittelbare Nutzung der erzeugten Energie für deinen Haushalt. Die einzelnen Bestandteile übernehmen dabei entscheidende Funktionen: Der Wechselrichter wandelt den erzeugten Gleichstrom in nutzbaren Wechselstrom um, der Solarladeregler optimiert die Energiezufuhr, während der Akku die gespeicherte Energie jederzeit verfügbar macht. Modular erweiterbar Durch die intelligenten Steuerungssysteme bietet Anker maximale Flexibilität. Mithilfe der Solix Erweiterungsakkus kannst du die Speicherkapazität einfach von 1,6 kWh auf bis zu 9,6 kWh erweitern. Bis zu 5 Speichermodule lassen sich mit einer Solarbank verbinden. Dank des modularen Designs stapelst du die Akkus direkt aufeinander ohne zusätzliche Kabel. Thermal Boosting Technology Die Thermal Boosting Technology ermöglicht durch präzise Echtzeit-Überwachung den Betrieb der Batterie bei bis zu -20°C. Durch die effektive Wärmeableitung sorgt die Technologie außerdem für erhöhte Sicherheit und optimale Lade- und Entladeeffizienz. Dies steigert die Gesamtleistung und verlängert die Lebensdauer der Komponenten. Durch die IP65-Schutzklasse ist die Solarbank wasserdicht und staubfest. Energiemanagement über die Anker-App Mit der zugehörigen Anker App kannst du in Echtzeit die erzeugte Solarenergie und den Stromverbrauch im Haushalt überwachen. Zudem können Einsparungen, sowie CO2-Emissionen berechnet und mit nur einem Fingertipp zwischen vier EMS-Modi gewechselt werden. Technische Daten Akku Akkutyp: LiFePO4Kapazität: 1600WhMax. Erweiterbare Kapazität: 9600WhLebenszyklus: 6000 bis 70%Anzahl der MPPT: 2 Leistungseingang Eingangsport: PV Connector (4 Sätze)Max. Nennleistung des Eingangs (Laden): 2400WMax. MPPT-Eingangsleistung: 1200WMax. PV-Eingangsstrom: 20AMax. PV-Eingangsspannung: 60V Leistungsausgang Ausgabeport: PV ConnectorAC-Ausgangsleistung (Entladen): 800WMax. Backup AC Ausgangsleistung: 1000WAC-Ausgangsstrom: Max. 3,5A, 230VNennleistung AC: 220/230/240VFrequenz: 50/60Hz Allgemein Herstellergarantie: 10 JahreLeistungsgarantie: 15 JahreKonnektivität: Bluetooth. 2.4GHz WLANLade- und Entladetemperatur: -20 ~ +55°CSchutzart: IP65Gewicht: 21,2 kgAbmessungen: 460 x 249 x 254 mm Lieferumfang: 1x Anker SOLIX 2 E1600 PLUS Solarbank 1x Schuko-Ladekabel (5m) 4x Solarpanel-Verlängerungskabel (3m) 1x Installationszubehör 1x Anleitungshandbuch