Blue Smart IP67 charger - wirelessly monitored car batteries with Bluetooth Smart Download the VictronConnect app to your smartphone and connect to the battery charger via Bluetooth. This allows you to monitor the voltage, current and charge status wirelessly via the app and keep you fully informed. Less heat and power consumption with high charging power Compared to the industry standard, Victron Blue Smart IP67 chargers emit very little energy to the outside in the form of heat. After a full charge, the power consumption is less than 0.5 watts (W). Corrosion-resistant thanks to aluminum and resin The ingress of liquids and dust is prevented by an aluminum housing. In addition, the coating of the electronics with special industrial resin ensures optimum protection against shocks and ambient heat. In addition, the output current is automatically reduced at temperatures above fifty degrees.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Das Blue Smart IP67 12/25 230V Akkuladegerät von Victron Energy (MPN: BPC122514006) ist ein intelligentes und leistungsstarkes Batterieladegerät der neuesten Generation. Mit einem Ladestrom von 25A eignet es sich hervorragend zum Aufladen von 12V AGM-, Gel- und Bleisäure-Batterien sowie Lithium-Ionen-Akkus. Der 5-stufige adaptive Ladealgorithmus sorgt automatisch für die bestmögliche Batterienutzung. Die Funktionen der Blue Smart IP67 Serie erweitern die der IP65 und IP22 Serien, um die möglichen Einsatzgebiete, da diese zudem wasserdicht und stoßgeschützt sind. Dank integriertem Bluetooth bietet dieses Ladegerät eine kabellose Lösung zur Überwachung von Spannung und Strom, zur Anpassung von Einstellungen und zur Aktualisierung des Geräts, sobald neue Funktionen verfügbar sind. Produktvorteile 95% WirkungsgradAdaptiver 5-stufiger Ladealgorithmus3 leicht wählbare LademodiTemperaturkompensationÜberhitzungsschutzGeräuschloser BetriebVollwertiger Schutz - wasserdicht, stoßgeschützt und feuerhemmendStatusanzeige via LED-AnzeigeÜberwachung mit VictronConnect-App Adaptiver 5-stufiger Ladealgorithmus Das Blue Smart Ladegerät zeichnet sich durch sein mikroprozessorgesteuertes, „adaptives” Batterie-Management aus. “Adaptiv“ bedeutet, dass der Ladevorgang automatisch der Art der Batterienutzung angepasst wird. "Bulk" (Konstantstromphase) - Die Batterie wird zuerst mit maximalem Ladestrom geladen. Sobald die konfigurierte Absorptionsspannung erreicht ist, wird der Ladevorgang optimal angepasst."Absorption" (Konstantspannungsphase) - Der Akku wird mit der konfigurierten Absorptionsspannung geladen. Dabei nimmt der Ladestrom allmählich ab, je näher die Batterie ihrer vollen Ladung kommt."Recondition" (Regenerierungsphase) - Das Ladegerät erhöht die Batteriespannung auf die konfigurierte Wiederherstellungsspannung. Dabei wird der Ausgangsstrom automatisch auf 8 % des Nennladestroms begrenzt (zum Beispiel maximal 1,2 A bei einem 15-A-Ladegerät)."Float" (Ladeerhaltungsspannungsphase) - Die Batteriespannung wird bei der eingestellten Erhaltungsspannung gehalten, um ein Entladen zu verhindern. Sobald die Float-Phase beginnt, ist die Batterie vollständig geladen und bereit für den Einsatz."Storage" (Lagermodus) - Die Batteriespannung wird auf die konfigurierte Speicherspannung eingestellt, die etwas niedriger ist als die Erhaltungsspannung. Dadurch wird die Gasbildung minimiert und die Lebensdauer des Akkus verlängert, während sie unbenutzt bleibt und kontinuierlich geladen wird. Höchster Ladewirkungsgrad aller Zeiten Das Akku-Ladegerät setzt einen neuen Maßstab in der Branche: Mit einer Effizienz von 95% erzeugt es drei- bis viermal weniger Wärme. Sobald die Batterie vollständig aufgeladen ist, sinkt der Stromverbrauch auf unter ein Watt, was fünf- bis zehnmal effizienter ist als der Industriestandard. Weitreichender Schutz mit IP67 Es ist extrem langlebig und zuverlässig, da es gegen Wasser, Öl und Schmutz geschützt ist. Mit seinem soliden Aluminiumgehäuse und der versiegelten Elektronik bietet es dir Sicherheit und Leistungsfähigkeit in jeder Situation. Überhitzungsschutz und Wiederherstellungsfunktion Das Batterieladegerät eignet sich ideal für den Einsatz in heißen Umgebungen, wie zum Beispiel in einem Maschinenraum. Bei steigenden Temperaturen bis zu 60 °C wird der Ausgangsstrom automatisch reduziert, sodass das Ladegerät zuverlässig weiterarbeitet, ohne auszufallen. Des Weiteren beginnt es den Ladevorgang selbst dann, wenn die Batterie komplett auf null Volt entladen ist. Zudem stellt es die Verbindung zu einer vollständig entladenen Lithium-Ionen-Batterie mit integrierter Trennfunktion zuverlässig wieder her. Lagermodus Dieser wird aktiviert, wenn die Batterie innerhalb von 24 Stunden nicht entladen wird. In diesem Modus wird die Ladespannung auf 2,2 V/Zelle gesenkt, um Gasbildung und Korrosion an den positiven Platten zu minimieren. Einmal pro Woche wird die Spannung kurzzeitig erhöht, um eine Ausgleichsladung durchzuführen. Dies verhindert effektiv die Elektrolytschichtung und Sulfatierung, die Hauptursachen für vorzeitigen Batterieausfall. App-Nutzung und Überwachung Das Ladegerät ist mit integriertem Bluetooth ausgestattet, was dir eine einfache und schnelle Einrichtung ermöglicht. Mit der VictronConnect-App kannst du über dein Mobiltelefon oder Tablet erweiterte Einstellungen vornehmen, deine Geräte umfassend überwachen und mühelos Firmware-Updates durchführen. Verfügbar ist ebenso eine integrierte Ladevoreinstellungen, die du bequem über die App auswählen kannst. Die adaptive Ladelogik ist ideal für gängige Batterietypen wie LiFePO4, AGM, Gel und Bleisäure geeignet. Darüber hinaus kannst du erweiterte Konfigurationen mit individuellen benutzerdefinierten Einstellungen vornehmen. Technische Daten Nennspannungsbereich und Frequenz: 220-240 VAC / 50-60 HzEingangsspannungsbereich und Frequenz: 180-265 VAC / 45-65 HzWirkungsgrad: 95 %Stromverbrauch ohne Last: 0,5 WLadestrom, Normalmodus: 25 ALadestrom, LOW: 10 AKühlung: Natürliche KonvektionBetriebstemperaturbereich: -20°C - +60°CSchutzklasse: IP67Gewicht: 2,4 kgAbmessungen: 99 x 219 x 65 mm Lieferumfang 1x Victron Blue Smart IP67 Ladegerät1x 1,5m Netzkabel für Stromanschluss1x 1,5m Batterieanschlusskabel

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

2 meter DC extension cable from Victron Energy (MPN BPC900200014) for Victron battery chargers with DC connection, such as the devices in the Blue Power IP 65 series. Scope of delivery:1x Victron BPC900200014 DC extension cable 2m

The DC M8 battery connection cable with indicator panel from Victron Energy (MPN BPC900110114) is used to connect the battery to a Blue Power or Blue Smart IP65 battery charger with DC connection. It is suitable for all batteries with an M8 screw terminal and also has an integrated fuse holder fitted with a 30A ATO fuse.The integrated indicator panel provides information about the charge status of the battery and is suitable for 12 V lead batteries (liquid electrolyte, GEL, AGM).Feature of the DC M6 battery connection cablefor battery terminal M8compatible with Blue Power and Blue Smart IP65 chargers from VictronIntegrated indicator panel to display the charge statusprotected with 30A ATO fusesuitable for 12 V lead batteries (liquid electrolyte, GEL, AGM)Scope of delivery:1x Victron Energy BPC900110114 battery connection cable with indicator panel1x quick start guide

The DC M6 battery connection cable from Victron Energy (MPN BPC900100014) is used to connect the battery to a Blue Power IP65 battery charger with DC connection. It is suitable for all batteries with an M6 screw terminal and also has an integrated fuse holder fitted with a 30A ATO fuse. Features of the DC M6 battery connection cablefor battery terminal M6compatible with Victron Blue Power IP65 Chargerincluding fuse holderprotected with 30A ATO fuseScope of delivery: 1x Victron Energy BPC900100014 Battery connection cable M6 + 30A ATO fuse1x quick start guide

The bumper is a rubber protective cover from Victron Energy (MPN BPC920100100) for IP65 chargers from the Blue Power and Blue Smart series. It fits the models 12/10, 15/15 and 24/8. The bumper provides additional protection for the housing of the chargers. Features of the Victron rubber protective cover additional protection for the housing compatible with Blue Smart IP65 12/10, 12/15, 24/8 compatible with Blue Power IP65 12/10, 12/15, 24/8 Scope of delivery: 1x Victron Energy BPC920100100 Rubber bumper for IP65 Charger

The Victron 12 V cigarette lighter plug with fuse (BPC900300014) is an accessory item suitable for Victron battery chargers with DC connection such as the Blue Power IP65 chargers. Scope of delivery:1x Victron BPC900300014 12V cigarette lighter plug with fuse

The Victron Energy battery connection clamps (BPC900400014) are used to safely connect batteries with pole terminals and Victron's battery chargers with DC connection, such as the Blue Power IP 65 series. In addition to the tap-off clamps, the cable has a fuse holder with an integrated 30A flat fuse. Scope of delivery:1x Victron BPC900400014 battery connection clamps with fuse holder and 30A fuse

The DC M8 battery connection cable with indicator panel from Victron Energy (MPN BPC900120114) is used to connect the battery to a Blue Power or Blue Smart IP65 battery charger with DC connection. It is suitable for all batteries with an M8 screw terminal and also has an integrated fuse holder fitted with a 30A ATO fuse. Three integrated LEDs provide information on the current status of the battery and is designed for use with 12 V lead batteries (liquid electrolyte, GEL, AGM). Features of the DC M8 battery connection cable for battery terminal M8 compatible with Blue Power and Blue Smart IP65 chargers from Victron integrated LED battery status indicator to display the state of charge protected with 30A ATO fuse suitable for 12 V lead batteries (liquid electrolyte, GEL, AGM) Scope of delivery: 1x Victron Energy BPC900120114 battery connection cable with LED status indicator1x quick guide

Das DC M8 Batterie-Anschlusskabel von Victron Energy (MPN BPC900110014) wird zur Verbindung zwischen Batterie und einem Blue Power IP65 Batterieladegerät mit DC Anschluss verwendet. Es eignet sich für alle Batterien mit einem M8 Schraub-Terminal und verfügt außerdem über einen integrierten Sicherungshalter, der mit einer 30A ATO Sicherung bestückt ist.   Merkmal des DC M8 Batterie-Verbindungskabels für Batterieterminal M8 kompatibel mit Victron Blue Power IP65 Charger inklusive Sicherungshalter abgesichert mit 30A ATO Sicherung Lieferumfang: 1x Victron Energy BPC900110014 Batterie Anschlusskabel M8 + 30A ATO Sicherung1x Kurzanleitung