Blue Smart IP67 charger - wirelessly monitored car batteries with Bluetooth Smart Download the VictronConnect app to your smartphone and connect to the battery charger via Bluetooth. This allows you to monitor the voltage, current and charge status wirelessly via the app and keep you fully informed. Less heat and power consumption with high charging power Compared to the industry standard, Victron Blue Smart IP67 chargers emit very little energy to the outside in the form of heat. After a full charge, the power consumption is less than 0.5 watts (W). Corrosion-resistant thanks to aluminum and resin The ingress of liquids and dust is prevented by an aluminum housing. In addition, the coating of the electronics with special industrial resin ensures optimum protection against shocks and ambient heat. In addition, the output current is automatically reduced at temperatures above fifty degrees.

The clever Victron Blue Smart charger IP22 The Victron Blue Smart Charger IP22 is one of the smartest battery chargers on the market. Its particular strengths include the adaptive charging algorithm with six stages (Test, Bulk, Absorption, Recondition, Float and Storgage), which automatically adapts to the type of battery usage. This enables the charger to achieve an efficiency of up to 94 percent with low heat generation. In the event of overheating (over 50 degrees Celsius), the output current is automatically reduced to prevent damage. Innovation at the highest level The charging technology of the Victron Blue Smart charger IP22 impresses with the highest level of innovation. Lithium-ion (LiFePO4) batteries can also be charged. The sophisticated algorithm, consisting of a constant current phase, constant voltage phase and charge retention voltage phase, comes into play here. Thanks to the matching cell phone app, voltage and current can be monitored wirelessly. The settings can also be adjusted at any time. The ability to update the charger makes it a long-term companion. The best care for your batteries The Victron Blue Smart charger IP22 protects the batteries from damage. As soon as the charging process is complete, the power consumption drops to less than 0.5 watts to prevent overcharging. When the batteries are not in use, innovative trickle charging is possible. Among other things, gas development is minimized to prevent corrosion on the positive plates. The voltage is automatically increased once a week to prevent premature battery failure due to electrolyte stratification or sulphation.

Das Blue Smart IP22 24/12(1) Ladegerät von Victron Energy (MPN BPC241242002), ist ein professionelles, kompaktes 24V 12A Batterieladegerät der neusten Generation mit einem Ladeausgang und eingebautem Bluetooth! Das Blue Smart IP22 24/12(1) Ladegerät lässt sich mit Geräten in Ihrer Werkstatt oder mit Kraftfahrzeugen wie mit (klassischen) Autos, Motorrädern, Booten und Wohnmobilen verwenden und lädt sowohl klassische 24V Blei-Batterien als auch moderne Lithium Akkus. Es bietet Highlights des 24/12(1) Blue Smart IP22 Charger intelligentes Laden, bis zum perfekten Batteriezustand... Der sieben-stufige Lade-Algorithmus holt das Beste aus Ihrer Batterie heraus. Das Ladegerät liefert der Batterie die Energie, die sie benötigt, hält sie in einem gesunden Zustand, sichert eine bessere Leistung... und ein längeres Leben. Wiederherstellung von tiefen-entladenen "toten" Batterien Anders als die meisten anderen Marken und Produktreihen wird das Blue Smart IP22 Ladegerät versuchen, eine tiefen-entladene Batterie wieder aufzuladen, indem es ihr einen schwachen Ladestrom aufzwingt. Der normale Ladebetrieb wird dann wiederaufgenommen, sobald zwischen den Batterieanschlüssen ausreichend Spannung anliegt. Batteriestatus aus der Ferne abrufen, mit der VictronConnect App Das Blue Smart IP22 24/12(1) Ladegerät verfügt über eingebautes Bluetooth. Auf diese Weise lassen sich der Status des Ladegeräts und der Batterie auf einem Smartphone, Tablet oder Laptop überprüfen. Sämtliche Einstellungen des Ladegerätes können mit der VictronConnect App konfiguriert werden. die wichtigsten technischen Merkmale des 24/12(1) Blue Smart IP22 Charger Victron Teilenummer: BPC241242002lädt 24V Blei-Säure-, Gel-, AGM- und Lithium-Batterien12A maximaler Ladestrom1 Batterie-Ladeausgangsehr kompakte Abmessungen: 235 x 108 x 65mmhoch moderner, sieben-stufiger Lade-Algorithmusmit integriertem Bluetooth zur Nutzung mit der kostenlosen VictronConnect App sonstige Leistungsmerkmale des 24/12(1) Blue Smart IP22 Batterieladers richtungsweisender Wirkungsgrad Mit einem Wirkungsgrad von bis zu 94% erzeugen diese Ladegeräte im Vergleich zum Industriestandard bis zu viermal weniger Wärme. Nachdem die Batterie außerdem vollständig aufgeladen wurde, sinkt der Stromverbrauch auf weniger als 0,5 Watt, das ist etwa fünf bis zehn Mal besser, als der Industriestandard. adaptiver 7-stufiger Lade-Algorithmus Das 24/12(1) Blue Smart-Ladegerät zeichnet sich durch sein mikroprozessorgesteuertes, „adaptives” Batterie-Management aus. “Adaptiv“ bedeutet, dass der Ladevorgang automatisch der Art der Batterienutzung angepasst wird. Lagerungs-Modus: Weniger Wartung und Alterung im Ruhezustand der Batterie Der Lagerungs-Modus wird immer dann aktiviert, wenn innerhalb von 24 Stunden keine Entladung erfolgt ist. Die Ladeerhaltungsspannung wird dann auf 2,2V/Zelle (13,2V für eine 24V-Batterie) gesenkt, um die Gasentwicklung zu minimieren und damit eine Korrosion an den positiven Platten zu verhindern. Einmal pro Woche wird die Spannung auf den Level der Gasungsspannung erhöht. Dadurch wird eine Art Ausgleichsladung erzielt, die die Elektrolytschichtung und die Sulfatierung - die beiden Hauptgründe für vorzeitigen Batterieausfall - verhindert. Lieferumfang: 1x Victron Energy BPC241242002 24/12(1) IP22 Blue Smart Charger 1x Bedienungsanleitung

Blue Smart IP67 charger - wirelessly monitored car batteries with Bluetooth Smart Download the VictronConnect app to your smartphone and connect to the battery charger via Bluetooth. This allows you to monitor the voltage, current and charge status wirelessly via the app and keep you fully informed. Less heat and power consumption with high charging power Compared to the industry standard, Victron Blue Smart IP67 chargers emit very little energy to the outside in the form of heat. After a full charge, the power consumption is less than 0.5 watts (W). Corrosion-resistant thanks to aluminum and resin The ingress of liquids and dust is prevented by an aluminum housing. In addition, the coating of the electronics with special industrial resin ensures optimum protection against shocks and ambient heat. In addition, the output current is automatically reduced at temperatures above fifty degrees.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

The Blue Smart ip22 12/30(1) charger from Victron Energy (mpn bpc123042002), is a professional, compact 12v 30a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/30(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/30(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/30(1) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/30(1) Blue Smart ip22 Charger Victron Part number: bpc123042002charges 12v lead acid, gel, agm and lithium batteries30a maximum charge current1 battery charge outputvery compact dimensions: 235 x 108 x 65mmhighly advanced seven-step charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/30(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/30(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc123042002 12/30(1) ip22 Blue Smart Charger1x instruction manual

The Blue Smart ip22 12/30(1) charger from Victron Energy (mpn bpc123042002), is a professional, compact 12v 30a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/30(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/30(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/30(1) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/30(1) Blue Smart ip22 Charger Victron Part number: bpc123042002charges 12v lead acid, gel, agm and lithium batteries30a maximum charge current1 battery charge outputvery compact dimensions: 235 x 108 x 65mmhighly advanced seven-step charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/30(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/30(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc123042002 12/30(1) ip22 Blue Smart Charger1x instruction manual

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

The Blue Smart ip22 12/20(1) charger from Victron Energy (mpn bpc122042002), is a professional, compact 12v 20a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/20(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/20(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/20(1) charger features built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/20(1) Blue Smart ip22 Charger Victron Part number: bpc122042002charges 12v lead-acid, gel, agm and lithium batteries20a maximum charge current1 battery charging outputvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/20(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/20(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc122042002 12/20(1) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/20(1) charger from Victron Energy (mpn bpc122042002), is a professional, compact 12v 20a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/20(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/20(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/20(1) charger features built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/20(1) Blue Smart ip22 Charger Victron Part number: bpc122042002charges 12v lead-acid, gel, agm and lithium batteries20a maximum charge current1 battery charging outputvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/20(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/20(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc122042002 12/20(1) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/20(3) charger from Victron Energy (mpn bpc122044002), is a professional, compact 12v 20a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/20(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/20(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/20(3) charger features built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the most important technical features of the 12/20(3) Blue Smart ip22 Charger Victron Part number: bpc122044002charges 12v lead-acid, gel, agm and lithium batteries20a maximum charge current3 battery charging outputsvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/20(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/20(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc122044002 12/20(3) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/20(3) charger from Victron Energy (mpn bpc122044002), is a professional, compact 12v 20a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/20(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/20(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/20(3) charger features built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the most important technical features of the 12/20(3) Blue Smart ip22 Charger Victron Part number: bpc122044002charges 12v lead-acid, gel, agm and lithium batteries20a maximum charge current3 battery charging outputsvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/20(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/20(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc122044002 12/20(3) ip22 Blue Smart Charger 1x instruction manual

Ready for Bluetooth SmartThe Blue Smart IP67 charger is the wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new features become available.updating the charger when new functions are available.The functionality of the IP67 charger is further enhanced with Bluetooth, making it similar to our IP22 and IP65 chargers. Fully encased: waterproof, shockproof and fire retardant.Water, oil or dirt cannot damage the Blue Smart IP67 charger. The housing is made of cast aluminum and the electronicsis coated with resin. Highest charging efficiency ever!Setting a new industry standard: With an efficiency of at least 92% or more, these chargers produce three to four times lessheat. What's more, once the battery is fully charged, power consumption drops to less than one watt, which is about five to ten times better than the industry standard. Adaptive 5-stage charging algorithm: "Bulk" (constant current phase) - "Absorption" (constant voltage phase) - "Recondition"(regeneration phase), - "Float" (charge retention voltage phase)-"Storage" (storage mode) The Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. "Adaptive" means that the charging process is automatically adapted to the type of battery use. Storage mode: Less maintenance and ageing when the battery is at rest.Storage mode is always activated if the battery has not been discharged within 24 hours. In storage mode, the charge retention voltage is then reduced to 2.2 V/cell (13.2 V for a 24 V battery) to minimize gas development and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a kind of equalizing charge that prevents electrolyte stratification and sulphation - the two main causes of premature battery failure. Also charges lithium-ion batteriesLithium-ion batteries are charged using a simple - constant current phase - constant voltage phase - charge maintenance voltage phasealgorithm. Recovery function for fully discharged batteriesWill initiate charging even if the battery has been discharged to zero volts.Restores the connection to a fully discharged lithium-ion battery with integrated disconnect function. Overheating protectionCan be used in a hot environment such as an engine room. The output current is reduced when the temperature rises up to 60 °C, but the charger does not fail. Two LEDs for status indicationYellow LED: Constant charge phase (flashes quickly); constant voltage phase (flashes slowly); float voltage phase (lights up); storage voltage phase (off).Green LED: Switched on

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

The clever Victron Blue Smart charger IP22 The Victron Blue Smart Charger IP22 is one of the smartest battery chargers on the market. Its particular strengths include the adaptive charging algorithm with six stages (Test, Bulk, Absorption, Recondition, Float and Storgage), which automatically adapts to the type of battery usage. This enables the charger to achieve an efficiency of up to 94 percent with low heat generation. In the event of overheating (over 50 degrees Celsius), the output current is automatically reduced to prevent damage. Innovation at the highest level The charging technology of the Victron Blue Smart charger IP22 impresses with the highest level of innovation. Lithium-ion (LiFePO4) batteries can also be charged. The sophisticated algorithm, consisting of a constant current phase, constant voltage phase and charge retention voltage phase, comes into play here. Thanks to the matching cell phone app, voltage and current can be monitored wirelessly. The settings can also be adjusted at any time. The ability to update the charger makes it a long-term companion. The best care for your batteries The Victron Blue Smart charger IP22 protects the batteries from damage. As soon as the charging process is complete, the power consumption drops to less than 0.5 watts to prevent overcharging. When the batteries are not in use, innovative trickle charging is possible. Among other things, gas development is minimized to prevent corrosion on the positive plates. The voltage is automatically increased once a week to prevent premature battery failure due to electrolyte stratification or sulphation.

The Blue Smart ip22 12/30(3) charger from Victron Energy (mpn BPC123044002), is a professional, compact 12v 30a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/30(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/30(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/30(3) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/30(3) Blue Smart ip22 Charger Victron Part number: bpc123044002charges 12v lead acid, gel, agm and lithium batteries30a maximum charge current3 battery charging outputsvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/30(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/30(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy BPC123044002 12/30(3) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/30(3) charger from Victron Energy (mpn BPC123044002), is a professional, compact 12v 30a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/30(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/30(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/30(3) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/30(3) Blue Smart ip22 Charger Victron Part number: bpc123044002charges 12v lead acid, gel, agm and lithium batteries30a maximum charge current3 battery charging outputsvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/30(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/30(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy BPC123044002 12/30(3) ip22 Blue Smart Charger 1x instruction manual

Blue Smart IP67 charger - wirelessly monitored car batteries with Bluetooth Smart Download the VictronConnect app to your smartphone and connect to the battery charger via Bluetooth. This allows you to monitor the voltage, current and charge status wirelessly via the app and keep you fully informed. Less heat and power consumption with high charging power Compared to the industry standard, Victron Blue Smart IP67 chargers emit very little energy to the outside in the form of heat. After a full charge, the power consumption is less than 0.5 watts (W). Corrosion-resistant thanks to aluminum and resin The ingress of liquids and dust is prevented by an aluminum housing. In addition, the coating of the electronics with special industrial resin ensures optimum protection against shocks and ambient heat. In addition, the output current is automatically reduced at temperatures above fifty degrees.

Blue Smart IP67 charger - wirelessly monitored car batteries with Bluetooth Smart Download the VictronConnect app to your smartphone and connect to the battery charger via Bluetooth. This allows you to monitor the voltage, current and charge status wirelessly via the app and keep you fully informed. Less heat and power consumption with high charging power Compared to the industry standard, Victron Blue Smart IP67 chargers emit very little energy to the outside in the form of heat. After a full charge, the power consumption is less than 0.5 watts (W). Corrosion-resistant thanks to aluminum and resin The ingress of liquids and dust is prevented by an aluminum housing. In addition, the coating of the electronics with special industrial resin ensures optimum protection against shocks and ambient heat. In addition, the output current is automatically reduced at temperatures above fifty degrees.

The Blue Smart ip22 12/15(1) charger from Victron Energy (mpn bpc121542002), is a professional, compact 12v 15a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/15(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/15(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/15(1) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/15(1) Blue Smart ip22 Charger Victron Part number: bpc121542002charges 12v lead acid, gel, agm and lithium batteries15a maximum charge current1 battery charging outputvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/15(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/15(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc121542002 12/15(1) ip22 Blue Smart Charger 1x instruction manual

The Blue Smart ip22 12/15(1) charger from Victron Energy (mpn bpc121542002), is a professional, compact 12v 15a battery charger of the latest generation with a charging output and built-in Bluetooth! The Blue Smart ip22 12/15(1) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/15(1) Blue Smart ip22 Charger intelligent charging, until the perfect battery state... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/15(1) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/15(1) Blue Smart ip22 Charger Victron Part number: bpc121542002charges 12v lead acid, gel, agm and lithium batteries15a maximum charge current1 battery charging outputvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/15(1) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/15(1) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy bpc121542002 12/15(1) ip22 Blue Smart Charger 1x instruction manual

Blue Smart IP67 charger - wirelessly monitored car batteries with Bluetooth Smart Download the VictronConnect app to your smartphone and connect to the battery charger via Bluetooth. This allows you to monitor the voltage, current and charge status wirelessly via the app and keep you fully informed. Less heat and power consumption with high charging power Compared to the industry standard, Victron Blue Smart IP67 chargers emit very little energy to the outside in the form of heat. After a full charge, the power consumption is less than 0.5 watts (W). Corrosion-resistant thanks to aluminum and resin The ingress of liquids and dust is prevented by an aluminum housing. In addition, the coating of the electronics with special industrial resin ensures optimum protection against shocks and ambient heat. In addition, the output current is automatically reduced at temperatures above fifty degrees.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.

Blue Smart IP65 charger - the best for your car batteries With the Blue Smart IP65, you have found a professional battery charger that meets the highest demands. The automatic power supply and the intelligent charging algorithm with seven stages achieve a high charging efficiency of up to 95%. As a result, significantly less heat is generated, protecting components and extending the service life of the Blue Smart IP65 charger. Nevertheless, the device has overheating protection, which reduces the output current at temperatures above 60°C. Victron Connect app for effective charging control A special feature of the Blue Smart IP65 charger is the associated Victron Connect app, which establishes a connection between the smartphone and charger via Bluetooth. This makes it possible to check and even control the settings, displays and configurations. The voltage and charging current are clearly shown on the display so that you are always informed about the current charge status. Rescue defective batteries with Blue Smart The Blue Smart IP65 charger is able to charge even deeply discharged batteries. Normal chargers with reverse polarity protection cannot usually do this. The Blue Smart IP65 Charger starts with a low charging current to initiate battery recovery before continuing the normal charging process. In this way, lead-acid batteries that have not been used for a long time and have lost their performance due to sulphation can also be reactivated. With the Blue Smart IP65 charger, you can save your batteries from the end of their life.