Fine stranded wire made from bare copper wires Core insulation based on PVC You purchase: 1 meter of cable with a cross-section of your choice Colors red, black, blue or green-yellow All ordered quantities are delivered in one piece. Product properties: Flame retardant according to IEC 60332-1-2 Technical data: Approvals: HD 21/VDE 0281 Insulation Specific volume resistance: > 20 GOhm x cm Conductor construction: Fine-stranded according to VDE 0295 Class 5/ IEC 60228 Class 5 Minimum bending radius: According to HD 516 at 20°C ±10°C cable temperature Rated voltage: U0/U: 450/750 V Test voltage: 2500 V Current carrying capacity: VDE 0298 Part 4 Temperature range: Permanently installed: -30°C to +80°C

Cable lugs TYPE A-M are made of electrolytic copper tube (SE-Cu according to DIN 13600). The tube wall thickness guarantees the best electrical conductivity and mechanical protection against vibrations and conductor pull-out. Our cable lugs are annealed to guarantee optimum ductility; this is essential as the cable lugs have to withstand severe deformation during crimping and the usual twisting of the lug during use. The connectors must also ensure reliable contact in the event of oscillations and vibrations. Under these circumstances, hardness plays a decisive role in preventing breaks and cracks. The inspection hole ensures that the conductor is inserted correctly. The sleeve length has been chosen to ensure easy and correct positioning between the crimping inserts during crimping.

A practical quick connector for batteries that are difficult to reach or concealed. The eyelet terminals are fitted to the battery, making connection child's play without the operator having to actually reach the battery. Comfort Connect eyelets are available in three different sizes for different battery terminal sizes. Checks the charging status of hard-to-reach batteries, M8 8.4 mm eyelet The indicator makes it easy to monitor the battery charge status. The exact battery result is displayed two hours after the vehicle has been parked. Functions Red: The battery voltage is below 12.4 V. It is definitely time to recharge the battery. Yellow: The battery voltage is between 12.4 and 12.65 V. It is time to recharge the battery. Green: The battery voltage is above 12.65 V. OK! No need to charge.

Test winner of the charger comparison test of Autobild (issue 43/2010). Ctek battery charger suitable for all types of 12V lead-acid batteries (wet, maintenance-free, AGM, calcium/calcium and gel batteries) The MXS 5.0 is a charger equipped with the latest technology, which was previously reserved for CTEK professional devices. The charger solves a range of battery problems; it is the perfect charger for users with the highest demands. The MXS 5.0 offers a range of features, such as battery diagnostics that indicate whether the battery can accept and hold a charge, a special reconditioning function that recovers deeply discharged batteries with acid stratification, a unique maintenance charging function, a mode for optimized charging on cold winter days and the ability to charge demanding AGM batteries (i.e. Optima). The unique display allows the user to follow the entire charging process. The MXS 5.0 is a fully automatic 8-stage charger with a selectable charging current between 0.8 A and 5 A for 12V batteries from 1.2 - 110Ah and for maintenance charging up to 160Ah. The charger has protection class IP65 (protected against dust and splash water), was built to protect vehicle electronics systems, is protected against sparks, reverse polarity and short circuits. Details: Desulphation Perfect charge and charge retention Unique regeneration of deeply discharged batteries CTEK's 8-stage now visible via LED display Electronics safe Splashproof and dustproof (IP 65) Pulse charge retention GS tested

CTEK Comfort Connect extension cable 2.5m Extension Extends the possible distance from the charger to the vehicle or enables the socket to be moved to a more practical location for charging (e.g. in the cockpit).

A practical quick connector for batteries that are difficult to reach or hidden away. The eyelet terminals are fitted to the battery, making it very easy to connect without the operator having to actually reach the battery. Cable with M6 6.4 mm eyelet for quick and easy connection without clamps Functions Eyelet terminal M6 6.4 mm

Noqon NPC4 6V/12V battery charger with 4A charging current The car battery charger is an 11-step car battery charger suitable for charging and trickle charging 6V or 12V lead-acid batteries (batteries) with liquid electrolyte (WET), maintenance-free lead-acid batteries (MF), gel electrolyte (GEL) or electrolyte-absorbing mats (AGM). Select the desired charging voltage (6V or 12V) and the microprocessor-controlled charger takes care of everything fully automatically until the charging cycle is complete and the batteries are fully charged. The German-language display is easy to understand and convenient to operate. Thanks to the test function, battery charge levels can be determined before charging and the integrated memory function continues the charging process even after power interruptions without having to start from the beginning. There aresix charging programs to choose from. Fully automatic battery charging takes place in 11 charging steps. Modern safety technology with reverse polarity protection, overheating protection, overload protection and short-circuit protection protects you and the device from incorrect operation. Two cables with quick connectors and comfort plugs (permanent charging cable with eyelets for fixed installation & charging cable with clamps) are included with the jet-proof and dust-proof device (protection class IP65). Features: Suitable for continuous charging Test function/battery tester Memory function 6 charging programs 11 charging steps Technical data: Specification: at 12 V: 3.8 A / 0.8 A, 6 V: 0.8 A, microprocessor-controlled Power supply: 230V, 50 Hz220V - 240V, 50Hz Charging voltage: 7.2V/7.4V ±0.25 VDC - 14.4V/14.7V ±0.25 VDC Rated output current: 6V: 0.8A ±10% / 12V: 0.8A / 3.8A ±10% Current consumption: Max. 0.9 A / 230 V Charger type: 11 charging steps, automatic charging cycle Ambient temperature: -10 to +40 °C Reverse current: 0.2 mA after completion of charging (if charger remains connected to 230 V) 50 mA if charger disconnected from 230 V. Battery type: 6V & 12V lead-acid batteries (Wet, MF, GEL, EFB, AGM) Recommended battery capacity: 6V: 1.2 - 14Ah / 12V: 1.2 - 120Ah Protection class: IP65, protected against water jets Protection: Reverse polarity, thermal and overload protection, time control Scope of delivery: 1 x Noqon NPC4 battery charger 1 x crocodile clips 1 x quick contact cable with ring terminals

The LCD Charge Control S is a convenient, easy-to-use control and operating element that displays the status of the individual charging sources, the current charging phase, the voltage of the on-board and starter battery and the current charging current. In solar mode, the displays for the current solar power (W) and the energy counters (Wh and Ah, can be reset to "zero" at any time) are also available for your own statistical purposes. With the VBCS or VAC Triple, the mains charging mode can be switched on or off manually or reduced in terms of power (AC power limit) at the touch of a button, e.g. if the shore power is too weak. A special protective function ensures that an inadvertently switched off mains charge is reactivated if the on-board battery is in danger of being deeply discharged. The large, clear display has an illuminated and easy-to-read display with very low power consumption. The plug and play connection means it can be easily retrofitted at any time, even retrospectively, and its compact design means it can be installed in almost any location. The product has the following features: Compatible with VOTRONIC VBCS chargersLarge, clear displayBright, white illuminated displayDisplay of the active charging source mains/charging converter/solarControl of the mains charging function, AC power limit Display of battery charging phasesVoltage and charging current displaysSolar computer function

Practical clamp for your CTEK charger

In order to deliver maximum performance, your powersport vehicle must be in the best possible condition. Powersport vehicles are often not used for long periods of time. The CT5 POWERSPORT ensures that your powersport vehicle is always ready for use by providing its battery with a trickle charge. The CT5 POWERSPORT has been specially developed for charging and maintaining Powersport batteries and, thanks to its advanced technology, offers three fully automatic charging and maintenance programs. Normal: Suitable for all types of lead-acid batteries, including AGM, lithium*: For lithium* batteries and reconditioning. If required, it can be connected directly and indefinitely to the battery, ensuring that the battery is neither overcharged nor undercharged. The charger is easy to use and supports all types of Powersport batteries with a working voltage of 12 V. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP) Functions Practical and easy to use Testing and restoring the battery capacity output current: max. 2.3 A non-sparking reverse polarity protected short-circuit proof

A practical quick connector for batteries that are difficult to reach or hidden away. The eyelet terminals are fitted to the battery, making connection child's play without the operator having to actually reach the battery. Comfort Connect - Eyelet are available in three different sizes for different battery terminal sizes. Eyelet: M10 (10.4 mm) Cable length for all models: 40 cm Cable with M8 8.4 mm eyelet for quick and easy connection without clamps Functions Eyelet clamp M8 8.4 mm

Battery temperature sensor with 3 m connection cable and M8 mounting hole. Potted against environmental influencesSuitable for all VOTRONIC automatic chargers of the Pb and VAC series, VCC charging converters and solar controllers of the SR and MPP series.

VARTA Powerzone VPZ-LOAD 5000 Plus The Varta Powerzone VPZ-LOAD 5000 Plus charger takes away all your worries about your car battery. Whether you have an AGM, GEL, lead-acid, VRLA or wet battery, this charger will charge it for you. It has an advanced and intelligent microprocessor that controls the charging process. In addition, automatic diagnostic, rescue, charging, maintenance and charge retention functions are fully covered by the VPZ-LOAD 5000 Plus. Removing or disconnecting the car battery is no longer necessary with this device. Set the required battery voltage manually and connect the charger to the battery. If everything has been set correctly, the Varta VPZ-LOAD 5000 Plus charger will carry out the necessary measures for proper and gentle charging. You can also leave the charger permanently connected to the battery (when stationary) using the charge retention function. If the charger detects a defect or an incorrect setting, an error (display: "ER-X") is displayed. Safety functions To guarantee complete safety during charging, the charger is equipped with extensive safety functions. These safety functions provide protection for/against: Reverse polarity short circuits overheating Overcharge protection overvoltage Charging with defective batteries (automatic charge termination) Sparking Charging stages The charger has a 7-stage charging control, which is controlled and regulated by a microprocessor. This means that the charging stages are set automatically depending on the battery condition. Stage 1 - DiagnosisStage 2 - Pre-chargingStage 3 - SoftStartStage 4 - Main charging phaseStage 5 - Saturation chargingStage 6 - Rest/overgrowth phaseStage 7 - Continuous charge maintenance Technical data Charging voltage: 6V / 12V Max. charging current: 5ASupported batteries: AGM, GEL, lead-acid, lead-calcium, VRLA, ML, SLArecommended capacity: 2Ah-110AhLength: 150mmWidth: 80mmheight: 45mmWeight: 0.8kg Scope of delivery 1x charger Varta Powerzone VPZ LOAD 5000 Plus1x pole terminal adapter 0.6m1x ring terminal adapter 0.6m1x cigarette lighter adapter 0.6m1x extension 3m1x detailed operating instructions

Perfectly suited for cars, motorcycles, boats, lawnmowers, jet skis, etc. It can remain permanently connected and is therefore always able to indicate when the battery needs recharging.

The Comfort M8 connector is designed for mounting on the battery with eyelets - Eyelet diameter 8.4 mm - Cable length 0.55 m - Illuminated microdiodes indicate three levels of battery status - 15 A fuse

Qualitäts Akku, kompatibel zum Originalakku des Geräteherstellers.System: Ni-MHSpannung: 18VoltKapazität: 3000mAh / 54WhMasse (LxBxH): 142 x 78 x 52mm Unsere Werkzeugakkus sind idealer Ersatz oder Ergänzung zu Ihren vorhandenen Werkzeugakkus.Die Batterien sind zu den Original-Ladegeräten kompatibel, und können mit diesen schnell und sicher wieder aufgeladen werden. Unsere Ersatzakkus besitzen durch ihr schlagfestes Gehäuse eine hohe Bruchsicherheit und behalten jeweils ihre Formbeständigkeit. Original Akku-Bezeichnung bzw. ersetzt Typ: 244760-00, 24476000,FIRESTORM A18, A 18, A1718, A 1718,FSB18, FSB 18, FS18BX, FS18BX, FS 18 BX, FS18 BX, FS180BX, FS180BX, FS 180 BX, FS180 BX,HPB18, HPB 18, HPB18-OPE,QP18, QP 18, FIRE STORM FSB-18 (Slide-Pack Akku-System) Passend für folgende Geräte: BLACK & DECKER 5-Tool Kombo Kit: BDC518B-2, BDC518B2, BDC 518B-2, Akkuschrauber (BDGL18xxx Serie): BDGL18K-2, BDGL1800,BDGL 18K-2, BDGL18 K-2, BDGL 18 K-2, BDGL 1800, Bohrschrauber: BD18PSK, CDC180ASB, CDC18GK2, EPC18CABK, EPC18CAK,GCO18SFB, PS18K2, PS182KB, PS1800,BD 18PSK, CDC 180ASB, CDC 18GK2, EPC 18CABK, EPC 18CAK,GCO 18SFB, PS 18K2, PS 182KB, PS 1800,BD18 PSK, CDC180 ASB, CDC18 GK2, EPC18 CABK, EPC18 CAK,GCO18 SFB, PS18 K2, PS182 KB,BD 18 PSK, CDC 180 ASB, CDC 18 GK2, EPC 18 CABK, EPC 18 CAK,GCO 18 SFB, PS 18 K2, PS 182 KB Kettensäge: CCS818, CCS 818 Akkuschrauber (CD18xxx Serie): CD18CA, CD18SK-2, CD18SKSFRK, CD18SFRK,CD180GRK, CDC180AK, CD182K-2,CD 18CA, CD 18SK-2, CD 18SKSFRK, CD 18SFRK,CD 180GRK, CDC 180AK, CD 182K-2,CD18 CA, CD18 SK-2, CD18 SKSFRK, CD18 SFRK,CD180 GRK, CDC180 AK, CD182 K-2,CD 18 CA, CD 18 SK-2, CD 18 SKSFRK, CD 18 SFRK,CD 180 GRK, CDC 180 AK, CD 182 K-2, FIRESTORM (FS18xxx Serie): FS18CS, FS18FL, FS18HV, FS18ID, FS18PS, FS18PSK,FS18RS, FSL18 (Lampe), FS188F4, FS1800CS, FS1800D,FS1800D-2, FS1800ID, FS1800JS, FS1800RS, FS1800S,FS1802BN (Tacker), FS1802D, FS1802S, FS1806CSL,FSX1800HD, FSX18HD, FS 18CS, FS 18FL, FS 18HV,FS 18ID, FS 18PS, FS 18PSK, FS 18RS, FSL 18 (Lampe),FS 188F4, FS 1800CS, FS 1800D, FS 1800D-2, FS 1800ID,FS 1800JS, FS 1800RS, FS 1800S, FS 1802BN (Tacker),FS 1802D, FS 1802S, FS 1806CSL, FSX 1800HD, FSX 18HD,FS18 CS, FS18 FL, FS18 HV, FS18 ID, FS18 PS, FS18 PSK, FS18 RS,FS188 F4, FS1800 CS, FS1800 D, FS1800 D-2, FS1800 ID,FS1800 JS, FS1800 RS, FS1800 S, FS1802 BN (Tacker),FS1802 D, FS1802 S, FS1806 CSL, FSX1800 HD, FSX18 HD,FS 18 CS, FS 18 FL, FS 18 HV, FS 18 ID, FS 18 PS, FS 18 PSK, FS 18 RS,FS 188 F4, FS 1800 CS, FS 1800 D, FS 1800 D-2, FS 1800 ID, FS 1800 JS,FS 1800 RS, FS 1800 S, FS 1802 BN (Tacker), FS 1802 D, FS 1802 S,FS 1806 CSL, FSX 1800 HD, FSX 18 HD Rasentrimmer: GLC2500, NST2018, NST1810,GLC 2500, NST 2018, NST 1810 Akku-Astsäge: GPC1800, GPC 1800, NPP2018, NPP 2018 Heckenschere: GTC610, GTC 610 Schlagbohrschrauber (HP18xxx / HPD18xxx / HPG18xxx Serie): HP188F2, HP188F2B, HP188F2K, HP188F3B, HP188F3K,HPD18K-2, HPD1800, HPG18K-2, HPG1800,HP 188F2, HP 188F2B, HP 188F2K, HP 188F3B, HP 188F3K,HPD 18K-2, HPD 1800, HPG 18K-2, HPG 1800,HP188 F2, HP188 F2B, HP188 F2K, HP188 F3B, HP188 F3K,HPD18 K-2, HPG18 K-2,HP 188 F2, HP 188 F2B, HP 188 F2K, HP 188 F3B, HP 188 F3K,HPD 18 K-2, HPG 18 K-2 Heckentrimmer: NHT518, NHT 518 Laubbläser: NS118, NS 118 Schlagbohrschrauber (XTC Serie): XTC18, XTC18BK, XTC183BK,XTC 18, XTC 18BK, XTC 183BK,XTC18 BK, XTC183 BK, XTC 18 BK, XTC 183 BK, NPT3118, NPT 3118

Power management system for starter batteries and secondary batteries Smartpass 120S is a 120 A energy management system that distributes, controls and maximizes the energy provided by the alternator to supply the service batteries and end devices. SMARTPASS 120S is suitable for all 12 V batteries between 28 Ah and 800 Ah. The battery monitor function of the Smartpass 120S prioritizes important devices such as radio, emergency lighting and navigation systems by supplying them with priority power, while non-critical consumers are switched off when the service battery voltage is low. The device's battery monitor protects your service battery from deep discharge, and the integrated overtemperature protection reduces the charging current before the battery temperature rises too high. SMARTPASS 120S is compatible with the D250SA and D250SE on-board chargers. Functions Battery disconnect function eliminates the need for diodes and VSR relays Fully automatic Maximizes the service life of the battery Battery monitor to protect the secondary battery from deep discharge Dynamic overcurrent protection enables short-term currents of up to 350 A for fast charging Battery temperature protection for additional safety Splash-proof and dust-proof (IP65)

Robust clamps for quick connection to the battery, shows the battery status. INDICATOR CLAMP uses simple traffic light symbols to indicate the charge status of your battery. Easy to switch between vehicles - ideal for workshops and showrooms. When charging is required, the cap can be removed from the device and a compatible CTEK charger plugged in to fully recharge the battery. Cable length 1.5 m. Functions Red: The battery voltage is below 12.4 V. It is definitely time to recharge the battery. Yellow: The battery voltage is between 12.4 and 12.65 V. It is time to recharge the battery. Green: The battery voltage is above 12.65 V. OK! No need to charge.

Cable for checking the battery status via a 12-volt socket INDICATOR CIG PLUG is a combination of quick connector and indicator for easy charging. Perfect for checking the charge status and charging the battery via the vehicle's 12V socket. Suitable for all 12 V chargers from CTEK up to 8 A. INDICATOR CIG PLUG is a universal device for 12 and 21 mm sockets. Note: The socket must be supplied with power even if the ignition switch is in the "off" position. Functions Red: The battery voltage is below 12.4 V. It is definitely time to recharge the battery. Yellow: The battery voltage is between 12.4 and 12.65 V. It is time to recharge the battery. Green: The battery voltage is above 12.65 V. OK! No need to charge.

The Automatic-Charger Pb 1215 SMT 2B from Votronic (MPN 3100) is a modern battery charger for mobile use. It has charging programs for GEL, AGM, acid and modern lithium batteries and is designed for 12V battery voltage. The charging current at the main output is 15A. There is also a secondary charging output for the starter battery, which can supply an additional 2A charging current. The device is suitable for batteries with a capacity of 38Ah to 170Ah.Important features of the Pb 1215 SMT 2B battery charger reliably charges GEL, AGM, acid and LiFePO4 batteries 15A charging current, 2A charging current at the auxiliary charging output Official Votronic part number: 3100 Charging options: 1 supply battery and 1 starter battery The charging voltage is free of peaks and regulated in such a way that overcharging of the batteries is ruled out. Fully automatic continuous operation: The charger can be permanently connected to the battery and keeps it fully charged. In the event of a power failure, the batteries are not discharged (disconnection by safety switch). Lithium LiFePO4 maintenance, auto wake-up, maintenance phase: Regular automatic activation of battery cell balancing every 10 days to ensure that the battery is always fully charged. Lead battery regeneration twice a week during long downtimes to prevent harmful acid stratification. Parallel and buffer operation: The battery continues to be charged or kept fully charged during simultaneous consumption. The charger automatically calculates and monitors the adjustment of the charging times. Monitoring-free charging: Multiple protection against overload, overheating, overvoltage, short circuit, polarity reversal, malfunction and battery back-discharge through electronic cut-off up to complete disconnection of charger and battery by built-in safety switches. Connection for battery temperature sensor (accessory temperature sensor 825, art. no. 2001): With lead batteries (acid, gel, AGM), the charging voltage is automatically adjusted to the battery temperature, resulting in a better full charge of the weaker battery in cold weather and avoiding unnecessary battery gassing and thus battery stress in summer temperatures. With LiFePO4 batteries, the battery temperature sensor is required for the function: It serves to protect the battery at high and especially at low temperatures below 0°C. Silent Run function: Noise-optimized operation at the touch of a button (night mode). Power supply unit function: Enables consumers to be supplied without a battery (e.g. battery replacement). Charging cable compensation: Voltage losses on the charging cables are automatically compensated for. Built-in on-board mains filter: Problem-free parallel operation with solar systems, wind and petrol generators, alternators etc. on one battery. Charging aid for deeply discharged lead batteries: Gentle pre-charging of the (lead-acid, -gel, -AGM) battery up to 8 V, then powerful support for the battery if consumers are still switched on. Disconnection of the batteries in the event of mains failure, overheating, malfunction (safety switch per charging output). Separate auxiliary charging output "S" for supporting and trickle charging the vehicle starter battery. Overview of the charging programs of the Pb 1215 SMT 2B"Gel": Charging program for gel batteries, characteristic curve IU1oU2oU3 Adapted to sealed, gas-tight gel/dryfit batteries with fixed electrolyte, which generally require a higher charging voltage level and longer U1 holding times in order to achieve short charging times with particularly high capacity storage and to avoid long-term battery "starvation"."AGM": Charging program for AGM/fleece batteries, characteristic curve IU1oU2oU3 Intended for charging sealed, gas-tight AGM (Absorbent Glass Mat) batteries in lead-fleece technology, which require a particularly high U1 level with coordinated holding times for full charging and then a moderate U2 level for charge retention (plate and round cell technology). ."UNIVERSAL": Charging program for lead-acid/wet/AGM batteries, characteristic curve IU1oU2oU3 Universal program for charging and charge retention of acid batteries in vehicles (mixed mobile/stationary). With a medium U1 level, still offers short charging times, a good charge factor and good acid mixing for open and closed, low-maintenance, maintenance-free standard, traction, lighting, solar and heavy-duty batteries, as well as AGM batteries with a normal U1 level."LiFePO4": Charging program for lithium batteries, characteristic curve IU1oU2oU3 Charging program tailored to lithium LiFePO4 batteries with their own BMS and prescribed or built-in protective circuitry. A special rest maintenance function automatically keeps the LiFePO4 battery at a charge level of 50-80% when the vehicle is parked (seasonal operation), which is beneficial for the service life, and also buffers 12 V consumers and the vehicle starter battery. In addition, a regular Auto Wake UP function activates the battery cell balancing.Scope of delivery:1X Votronic 3100 Pb 1215 SMT 2B battery charger1x operating instructions (German)

Durable silicone rubber protection for chargers with 3.8 to 5 A Suitable for use with all CTEK chargers with 3.8-5.0 A.

Tests the voltage, starting power and performance of the alternator The MXS 5.0 TEST & CHARGE is designed for batteries between 1.2 Ah and 110 Ah. The test function includes three easy-to-use programs for testing battery voltage, starting power and alternator performance, providing a complete picture of the battery state of charge and system health of the vehicle charging system. In addition, the MXS 5.0 TEST & CHARGE features a patented automatic desulphation program and CTEK's patented Float/Pulse system. This is the most efficient trickle charge mode when a battery is left connected to the charger for an extended period of time. Functions Charging of batteries between 1.2 Ah and 110 Ah Patented float/pulse trickle charge Easy to read LED display splash-proof and dust-proof (IP65) non-sparking reverse polarity protected short-circuit proof

Noqon NPC8 battery charger 12V/24V with 8A charging current The car battery charger is an 11-step car battery charger suitable for charging and trickle charging 12V or 24V lead-acid batteries (batteries) with liquid electrolyte (WET), maintenance-free lead-acid batteries (MF), gel electrolyte (GEL) or electrolyte-absorbing mats (AGM). Select the desired charging voltage (12V or 24V) and the microprocessor-controlled charger takes care of everything fully automatically until the charging cycle is complete and the batteries are fully charged. The German-language display is easy to understand and convenient to operate. Thanks to the test function, battery charge levels can be determined before charging and the integrated memory function continues the charging process even after power interruptions without having to start from the beginning. There aresix charging programs to choose from. Fully automatic battery charging takes place in 11 charging steps. Modern safety technology with reverse polarity protection, overheating protection, overload protection and short-circuit protection protects you and the device from incorrect operation. Two cables with quick connectors and comfort plugs (permanent charging cable with eyelets for fixed installation & charging cable with clamps) are included with the jet-proof and dust-proof device (protection class IP65). Features: Suitable for continuous charging Test function/battery tester Memory function 6 charging programs 11 charging steps Technical data: Specification: at 12 V: 3.8 A / 0.8 A, 6 V: 0.8 A, microprocessor-controlled Power supply: 220V - 240V, 50Hz Charging voltage: 14.4V/14.7V ±0.25 VDC, 28.8V/29.4V ±0.25 VDC Rated output current: 12V: 2A / 8A ±10% - 24V: 4A ±10% Current consumption: Max. 0.9 A / 230 V Charger type: 11 charging steps, automatic charging cycle Ambient temperature: -10 to +40 °C Battery type: 12V & 24V lead-acid batteries (Wet, MF, GEL, EFB, AGM) Recommended battery capacity: 12V: 2.2 - 180Ah / 24V: 14 - 120Ah Protection class: IP65, protected against water jets Protection: Reverse polarity, thermal and overload protection, time control Scope of delivery: 1 x Noqon NPC8 battery charger 1 x crocodile clips 1 x quick contact cable with ring terminals

CTEK Comfort Connect Cig Plug cigarette lighter cable