Fine stranded wire made from bare copper wires Core insulation based on PVC You purchase: 1 meter of cable with a cross-section of your choice Colors red, black, blue or green-yellow All ordered quantities are delivered in one piece. Product properties: Flame retardant according to IEC 60332-1-2 Technical data: Approvals: HD 21/VDE 0281 Insulation Specific volume resistance: > 20 GOhm x cm Conductor construction: Fine-stranded according to VDE 0295 Class 5/ IEC 60228 Class 5 Minimum bending radius: According to HD 516 at 20°C ±10°C cable temperature Rated voltage: U0/U: 450/750 V Test voltage: 2500 V Current carrying capacity: VDE 0298 Part 4 Temperature range: Permanently installed: -30°C to +80°C

Cable lugs TYPE A-M are made of electrolytic copper tube (SE-Cu according to DIN 13600). The tube wall thickness guarantees the best electrical conductivity and mechanical protection against vibrations and conductor pull-out. Our cable lugs are annealed to guarantee optimum ductility; this is essential as the cable lugs have to withstand severe deformation during crimping and the usual twisting of the lug during use. The connectors must also ensure reliable contact in the event of oscillations and vibrations. Under these circumstances, hardness plays a decisive role in preventing breaks and cracks. The inspection hole ensures that the conductor is inserted correctly. The sleeve length has been chosen to ensure easy and correct positioning between the crimping inserts during crimping.

VOLTIMA 2-teilig langes Haltespoiler für Solarmodule (weiss) 

VOLTIMA 2-teilig langes Haltespoiler für Solarmodule (schwarz)

This special connection is used for the assembly of parallel solar PV modules. Voltima Solar Y (L) connection adapter for 4-6mm² solar cable 2to1 MC type 4 enables time-saving, reliable cabling of solar panels and quick, easy installation.

NOQON Ladebooster: NB- & NBS-Serie Sie schenken Freiheit und sparen Zeit: die NOQON Ladebooster der NB- und NBS-Serie. Die Buchstaben NB der Serienbezeichnungen stehen für "Battery Booster" - englisch für "Ladebooster", die Spezialgeräte zur Batterieaufladung. Worin sich die NOQON Ladebooster von herkömmlichen Ladegeräten unterscheiden: Sie erlauben das Laden einer 12-Volt-Batterie durch eine andere 12-Volt-Batterie (Battery-to-Battery-Methode, kurz B2B). Dabei läuft der Ladevorgang kontrolliert ab: Der Ladebooster prüft Batterie über die Messleitungen kontinuierlich, dass während der Fahrt weder die Versorgungsbatterie überladen noch die Starterbatterie entladen wird.   NOQON NBS-Modelle - Ladebooster mit integrierten Solarladeregler Das S der einen NB-Serie steht für den hier integrierten Solarladeregler, der als MPPT-Version den Wirkungsgrad eines herkömmlichen PWM-Ladereglers übertrifft. Bei Fahrtunterbrechungen oder Ankunft am Fahrtziel startet die Solarladung über die Solarmodule auf dem Fahrzeugdach automatisch. Der NOQON NBS 30 erreicht eine Solarladeleistung bis 250 W/20 A, der NOQON NBS 60 sogar bis zu 430 W/30 A.   Ladevorgang in drei Schritten: Schritt 1: Maximaler Strom bis zum Zielwert der Konstantspannungsladung Schritt 2: Strom sinkt, Konstantspannungslademodus startet, Ladedauer rund 2 Stunden SChritt 3: Stopp der Konstantspannungsladung bei 12,6 Volt Batteriespannung und Einleitung der Erhaltungsladung   Installation des NOQON Ladeboosters Über einen DIP-Schalter wird die Batterietechnologie gewählt: Lithium oder Blei-Säure/AGM/Gel. Am Battery Booster befindet sich der Anschluss für den NOQON Charge Monitor CM 1 und der externe NOQON Bluetooth-Dongle BTD1. Ein Monitor oder Smartphone informieren den Anwender unter anderem über den aktuellen Batterieladezustand. Weitere Anschlüsse, zum Beispiel für einen Spannungmesskabel, Temperatursensor oder zusätzliche Versorgungsbatterien sind ebenso vorhanden.   Lichtmaschine als Generator Die Fahrzeug-Lichtmaschine funktioniert wie ein elektrischer Generator, den hier der Verbrennungsmotor zum Aufladen von Starterbatterie und Verbrauchergeräten antreibt. Wann die Starterbatterie schließlich aufgeladen ist, hängt von ihrem anfänglichen Ladezustand und der Fahrtdauer ab. Ist die Batterie voll, kann sie keine Reserven mehr aufnehmen. Hier kommt der NOQON Ladebooster wie gerufen. Er übernimmt die weiter erzeugte Energie und speichert sie in einer zusätzlichen Batterie.   Verlustfreie Aufladung Zur optimalen Batterieaufladung passt der NOQON Ladebooster über eine exakte Ladekennlinie die Spannungmesskabel automatisch auf die benötigten Werte an. Dabei gleicht er während der Fahrt auftretende Leitungsverluste und Spannungsschwankungen vom Generator aus - sowohl was die Batterie als auch was die 12-Volt-Verbrauchergeräte betrifft.   NOQON Ladebooster - Sicherheitsfunktionen im Überblick: Über- und Unterspannungsschutz der Hauptbatterie Unterspannungsschutz der Starterbatterie Überlastungsschutz der B2B-Ladung Überhitzungsschutz Umkehrschutz Nur NOQON NBS-Modelle: PV-Überlastungsschutz Nur NOQON NBS-Modelle: PV-Überspannungsschutz  

Ideal for bonding to the roof - no drilling required - Strong side support for small and large solar panels - Ideal for motorhomes, caravans, trucks, buses, boats and yachts - Can also be used on flat roofs of buildings, sheds, garages or other flat surfacesEasy installation: Holes are drilled into each bracket and corresponding holes are drilled into the frame of the solar panel on each side; then the brackets are attached to the solar panel with self-tapping screws (not included). Finally, the brackets can be glued to the roof using a suitable sealant or adhesive tape (not included) - sealant is recommended for a stronger bond. (NOT AVAILABLE)

Voltima solar connection adapter for 4-6mm² solar cable MC type 4 Protection class: mated IP67 Protection class: II Rated current: max. 30A System voltage: max. 1000V Locking system (snap in) Temperature range -40°C to 90 °C

VOLTIMA 2-teilig kurze Haltespoiler für Solarmodule (weiss)

NOQON charging boosters: NB & NBS series They give freedom and save time: the NOQON charging boosters in the NB and NBS series. The letters NB in the series designations stand for "Battery Booster", the special devices for battery charging. This is where the NOQON charging boosters differ from conventional chargers: They allow a 12-volt battery to be charged by another 12-volt battery (battery-to-battery method, B2B for short). The charging process is controlled: the charging booster continuously checks the battery via the measuring lines to ensure that neither the supply battery is overcharged nor the starter battery discharged while driving. NOQON NBS models - charge boosters with integrated solar charge controller The S in the one NB series stands for the integrated solar charge controller, which, as an MPPT version, exceeds the efficiency of a conventional PWM charge controller. When the journey is interrupted or the vehicle arrives at its destination, solar charging starts automatically via the solar modules on the vehicle roof. The NOQON NBS 30 achieves a solar charging output of up to 250 W/20 A, the NOQON NBS 60 even up to 430 W/30 A. Charging process in three steps: Step 1: Maximum current up to the target value for constant voltage charging Step 2: Current decreases, constant voltage charging mode starts, charging time around 2 hours Step 3: Stop constant voltage charging at 12.6 volts battery voltage and start trickle charging Installing the NOQON charge booster The battery technology is selected via a DIP switch: Lithium or lead-acid/AGM/gel. The connection for the NOQON Charge Monitor CM 1 and the external NOQON Bluetooth dongle BTD1 is located on the battery booster. A monitor or smartphone informs the user about the current battery charge status, among other things. Further connections, for example for a voltage measurement cable, temperature sensor or additional supply batteries, are also available. Alternator as generator The vehicle alternator works like an electric generator, which is driven by the combustion engine to charge the starter battery and consumer devices. When the starter battery is finally charged depends on its initial state of charge and the duration of the journey. If the battery is full, it can no longer hold any reserves. This is where the NOQON charge booster comes in handy. It takes over the energy that is energy and stores it in an additional battery. Loss-free charging For optimum battery charging, the NOQON charge booster automatically adjusts the voltage measurement cables to the required values using an exact charging characteristic. In doing so, it compensates for line losses and voltage fluctuations from the generator that occur while driving - both for the battery and for the 12-volt consumer devices. NOQON charge booster - safety functions at a glance: Overvoltage and undervoltage protection of the main battery Undervoltage protection of the starter battery Overload protection for B2B charging Overheating protection Reverse protection NOQON NBS models only: PV overload protection NOQON NBS models only: PV overvoltage protection

VOLTIMA 7-teiliges kurzes Befestigungs-Komplettset für Solarinstallation (Weiss)

Fine stranded wire made from bare copper wires Core insulation based on PVC You purchase: 1 meter of cable with a cross-section of your choice Colors red and black All ordered quantities are delivered in one piece. Product properties: Flame retardant according to IEC 60332-1-2 Technical data: Approvals: HD 21/VDE 0281 Insulation Specific volume resistance: > 20 GOhm x cm Conductor construction: Fine-stranded according to VDE 0295 Class 5/ IEC 60228 Class 5 Minimum bending radius: According to HD 516 at 20°C ±10°C cable temperature Rated voltage: U0/U: 450/750 V Test voltage: 2500 V Current carrying capacity: VDE 0298 Part 4 Temperature range: Permanently installed: -30°C to +80°C

Sikaflex® 554 - 300 ml cartridge in white Sikaflex®-554 is an elastic one-component STP adhesive system specially developed for bonding large components in industrial production. Sikaflex®-554 shows good adhesion to a wide range of substrates with minimal pre-treatment. Sikaflex®-554 can be accelerated with the Booster and PowerCure system.Product features / advantages Very good weather resistance Good resistance to mold and mildew Good adhesion to a wide range of substrates without primer Good color stability under UV influence Free from solvents, isocyanate, phthalate and PVC High dynamic load-bearing capacity ISEGA certificate for use in the food sector Sikaflex®-554 is suitable for joints that are exposed to dynamic loads. Suitable substrates are metals, especially aluminum, metal primers, paints, sheet steel, ceramic materials and plastics. Sikaflex®-554 shows good adhesion to a variety of substrates with minimal pre-treatment. Follow the manufacturer's recommendations before using Sikaflex®-554 on materials at risk of stress cracking. Preliminary tests must be carried out with original materials to avoid stress cracking. This product is only suitable for experienced users. To ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the respective conditions.Adhesion surfaces must be clean, dry and free from grease, oil, dust and contamination. The surface pre-treatment depends on the specific nature of the substrate and is crucial for a durable bond. Instructions for substrate pre-treatment can be found in the current Sika® pre-treatment table. The information contained therein is based on experience and must always be verified by preliminary tests with original materials.Wide adhesion spectrum: Raw, primed and painted sheet steel Aluminum Stainless steel ABS plastic GRP polycarbonate PUR-soft, PUR-hard Hard PVC wood glass

Solar cable set 6mm²- 2 cables, each with an MC4 plug on one side for connection to the solar modules & open ends on the other side for connection to the solar charge controller- Double insulated from halogen-free, cross-linked polyolefin- UV & ozone resistant,- Available in 3m, 5m, 10m or 20m lengths

Acrylic Foam Tape / Acrylschaum-Klebeband - doppelseitiges Klebeband für flexibleSolarmoduleZur Verbindung von hoch- und mittel energetischen Werkstoffen wie z.B. Metallen und vielen Kunststoffen (PA, Acrylglas, ABS).Hohe Temperaturbeständigkeit von bis zu 230 Grad. Dieses doppelseitige Hochleistungsklebeband ist für dauerhafte starke Verbindungen im Innen- und Außenbereich konzipiert worden.Anwendungshinweise1. Klebeflächen müssen glatt, fest, sauber, trocken, fett- und staubfrei sein2. Klebeoberfläche nicht berühren. Klebeband mit leichtem Druck aufbringen3. Schutzabdeckung entfernen, Teile kleben und mindestens 10 Sekunden vollflächig und kräftig aufdrücken4. die optimale Verarbeitungstemperatur liegt zwischen 15 und 25 GradVor Ablauf von 24 Stunden die Klebung nicht belasten. Die zu klebenden Teile sind in dieser Zeit zu entlasten. Überkopfverklebungen werden nicht empfohlen.

The VCC 1212-50 from Votronic (3326) is a fully automatic, uninsulated battery charging converter for special vehicles, high-quality motorhomes and boats. The charging converter (booster) of the "VCC" series has been developed according to the latest specifications for the mobile charging of supply batteries (living area/on-board batteries) from the alternator (starter battery) while driving. The device also ensures a complete IU1oU2 charging characteristic curve while driving. The maximum charging current of the VCC 1212-50 is 50A and it can work with lead-acid, gel, AGM1, AGM2 and LiFePO4 batteries. This device charges a 12V battery from a 12V battery / alternator. In contrast to conventional cut-off relays, the charging voltage is lowered or raised according to the charging program specification, making it particularly suitable for EURO standard 6, 6 + plus vehicles. Universally applicable all-rounder For on-board batteries in classic lead-acid, lead-gel or lead-AGM as well as modern lithium-LiFePO4 technology, the 8 selectable charging programs guarantee a monitoring-free, fast and gentle full charge from any state of charge with subsequent full maintenance and care of the battery. Even on short journeys, the battery is charged with full charging current. Connected 12 V consumers are automatically supplied with power, even if the on-board power supply is heavily loaded. The automatic power control ensures the necessary safety and starting capability of the vehicle. Important features of the Votronic 3326 VCC 1212-50 The VCC 1212-50 is a B2B charger without galvanic isolation for charging 12V batteries from a 12V alternator / battery. max. charging current: 50A, input voltage range 12V, charges 12V batteries, recommended battery capacity: 75 - 440Ah Increases or decreases the voltage to the required level in order to charge the on-board battery precisely with the optimum charging characteristic. It fully compensates for line losses and voltage fluctuations in the alternator, such as those that constantly occur to a considerable extent in Euro 6 vehicles (intelligent alternators). Characterized by compact design, low weight (high-frequency switch mode technology) and powerfully dimensioned power components for safe operation. Significantly better energy balance of the on-board battery. No intervention in the starter circuit; the device behaves like a powerful consumer on the alternator. The supplied 12 V consumers are protected against overvoltage and voltage fluctuations. The charging voltage is free of peaks and regulated in such a way that the batteries cannot be overcharged. Fully automatic operation: The device is permanently connected to the batteries and is automatically activated by the vehicle's running alternator. The batteries are not discharged when the engine is not running. Parallel and buffer operation: The battery continues to be charged or is kept fully charged during simultaneous consumption. The device automatically calculates and monitors the adjustment of the charging times. Monitoring-free charging: Multiple protection against overload, overheating, overvoltage, short circuit, malfunction and battery back-discharge through electronic cut-off up to complete disconnection of device and battery. Built-in on-board filter: Problem-free parallel operation with other charging sources (EBL, chargers, engine and fuel generators, solar systems) on one battery. Charging cable compensation: Voltage losses on the charging cables are automatically compensated for. Connection for battery temperature sensor (sensor included in scope of delivery). For lead batteries (acid, gel, AGM), the charging voltage is automatically adjusted to the battery temperature. This results in a better full charge of the weaker battery in cold weather and avoids unnecessary battery gassing in summer temperatures. LiFePO4 batteries: Battery protection at high temperatures and, in particular, adapted charging at low temperatures below 0 °C. Charging aid for deeply discharged lead batteries: Gentle pre-charging of the (lead-acid, lead-gel, AGM) battery up to 8 V, then powerful support for the battery if consumers are still switched on. ? Also ensures the automatic activation of a LiFePO4 battery that has been switched off by the BMS. What added value does the use of a B2B charging converter offer me? The charging converters ensure optimum and rapid charging of the supply battery from the alternator while driving. In contrast to a simple cut-off relay, the charging voltage is raised to the value required for the respective battery type for a full charge and demanded by the battery manufacturers. This means that the full charging current can flow and a considerable amount of current can be charged into the battery in a short time. Long charging cables and losses as well as voltage fluctuations at the alternator are neatly compensated for. Charging converters with different input and output voltages (12V/24V or 24V/12V) make it easy to charge a second battery without installing a second alternator. The charging converters thus provide the well-known high quality of battery charging of the VOTRONIC chargers even while driving. The intelligent microprocessor charging control with "IU1oU2oU3" charging characteristics and dynamic charging time calculation automatically ensures fast and gentle full charging and subsequent charge retention of the connected batteries from any state of charge and always enables simultaneous supply of consumers in parallel with the supply battery. Scope of delivery: 1X Votronic 3326 VCC 1212-50 50A charging converter1x operating instructions (German)1x temperature sensor

Ideal for bonding to the roof - no drilling required - Strong side support for small and large solar panels - Ideal for motorhomes, caravans, trucks, buses, boats and yachts - Can also be used on flat roofs of buildings, sheds, garages or other flat surfacesEasy installation: Holes are drilled into each bracket and corresponding holes are drilled into the frame of the solar panel on each side; then the brackets are attached to the solar panel with self-tapping screws (not included). Finally, the brackets can be glued to the roof using a suitable sealant or adhesive tape (not included) - sealant is recommended for a stronger bond. (NOT AVAILABLE)

NOQON INVERTER WITH PURE SINE WAVE AND MANY ADDITIONAL FUNCTIONS HIGH EFFICIENCY AND SAFETY FOR ALL TYPES OF ELECTRICAL LOADS With the compact and lightweight high-frequency inverter of the NSC series from NOQON, you can convert your battery direct current into pure sinusoidal 230V alternating current. No more problems with sensitive loads, the NSC2512 from NO QON will power them all!In addition to all modern basic functions, the NSC2512 also offers the latest additional functions such as Connection option for the multifunction remote control Soft start (soft start) Overvoltage protection Undervoltage protection (saves the batteries) Overload protection Overheating protection Reverse polarity protection (fuse blows) Shutdown in case of overload Various acoustic warning signals in the event of problems NOQON inverters have the CE mark and the ECE test mark (E-mark). PURE SINE WAVE 100% PURE POWER LIKE FROM HOME More and more electronic loads are becoming more complex in their design and can no longer be operated with "modified sine wave current" from inferior inverters. The prerequisite for trouble-free operation is a pure sine wave current from NOQON's NSC series - just like from the socket at home! Gone are the days of streaks in the TV picture or humming and interference in audio and hi-fi applications. Restrictions for consumers in mobile use are now a thing of the past. HIGH POWER RESERVES POWER WHEN IT COUNTS Thanks to many integrated protective circuits, durable power electronics and intelligent microprocessor control, the NSC2512 guarantees high overload capacity (for high starting currents of inductive loads). 150% of continuous power for 10 seconds 200% power for 2 seconds With a continuous output of 2500W, this corresponds to 3750W for 10 seconds and 5000W for 2 seconds. This means that loads with high starting currents or with short-term high peak consumption can also be used without restrictions. HIGH-QUALITY COMPONENTS THE FIRST IMPRESSION IS NOT DECEPTIVE The NSC2512 has a very robust design, but thanks to its quiet active fan cooling it is whisper-quiet and extremely efficient, making it suitable for continuous operation.Thanks to high-quality electronic components and the latest high-frequency technology, it is able to achieve efficiencies of up to 90% with minimal power consumption.In addition to active fan cooling, the sturdy ribbed aluminum housing coated with European powder coating guarantees maximum passive cooling and therefore whisper-quiet continuous operation. INTEGRATED MULTI-STAGE BATTERY CHARGER INTEGRATED IUOU CHARGER WITH TRICKLE CHARGING With its maximum charging voltage of 14.4V, the integrated and intelligent charger is suitable for AGM, gel and LiFePo4 (with BMS) batteries as well as standard wet batteries. How it works: Charging takes place in two automatic stages, which ensure a gentle charge of the feeding batteries. At the end of the main charging phase, the integrated charger automatically switches to trickle charging. The trickle charge keeps the battery constantly at a level that is gentle on you and thus actively counteracts the natural self-discharge of the battery and premature ageing due to so-called "sulphation". This means that batteries can also be used permanently with the integrated charger of the NSC series. MAINS PRIORITY CIRCUIT OR BATTERY PRIORITY WITH INTEGRATED USV (UPS MODE)GENUINE UNINTERRUPTIBLE POWER SUPPLY (UPS) The NSC's built-in mains priority circuit allows you to switch on an external 230V power source when the batteries are empty or simply when required, without disrupting the ongoing operation of consumers. The intelligent built-in IUoU charger simultaneously charges the battery(ies) and automatically switches to trickle charging as soon as the battery(ies) are full.This is how it works:As soon as a mains voltage is registered at the AC input of the device (e.g. switching on from the household current or generator), it automatically switches to mains operation + charging within a lightning-fast 16ms. The inverter feeds the mains current through and switches the inverter function to "standby". This means that all consumers can continue to be used without further intervention and without draining the battery. When the external 230V voltage is removed, the system automatically switches back to battery supply within 16ms.

NOQON INVERTER WITH PURE SINE WAVE AND MANY ADDITIONAL FUNCTIONSHIGH EFFICIENCY AND SAFETY FOR ALL TYPES OF ELECTRICAL LOADS With the compact and lightweight high-frequency inverter of the NSC series from NOQON, you can convert your battery direct current into pure sinusoidal 230V alternating current.No more problems with sensitive loads, the NSC2512 from NO QON will power them all!In addition to all modern basic functions, the NSC2512 also offers the latest additional functions such asConnection option for the multifunction remote controlSoft start (soft start)Overvoltage protectionUndervoltage protection (saves the batteries)Overload protectionOverheating protectionReverse polarity protection (fuse blows)Shutdown in case of overloadVarious acoustic warning signals in the event of problemsNOQON inverters have the CE mark and the ECE test mark (E-mark). PURE SINE WAVE100% PURE POWER LIKE FROM HOMEMore and more electronic loads are becoming more complex in their design and can no longer be operated with "modified sine wave current" from inferior inverters. The prerequisite for trouble-free operation is a pure sine wave current from NOQON's NSC series - just like from the socket at home!Gone are the days of streaks in the TV picture or humming and interference in audio and hi-fi applications. Restrictions for consumers in mobile use are now a thing of the past. HIGH POWER RESERVESPOWER WHEN IT COUNTS Thanks to many integrated protective circuits, durable power electronics and intelligent microprocessor control, the NSC2512 guarantees high overload capacity (for high starting currents of inductive loads).150% of continuous power for 10 seconds200% power for 2 secondsWith a continuous power of 2500W, this corresponds to 3750W for 10 seconds and 5000W for 2 seconds.This means that loads with high starting currents or with short-term high peak consumption can also be used without restrictions. HIGH-QUALITY COMPONENTSTHE FIRST IMPRESSION IS NOT DECEPTIVEThe NSC2512 has a very robust design, but thanks to its quiet active fan cooling it is whisper-quiet and extremely efficient, making it suitable for continuous operation.Thanks to high-quality electronic components and the latest high-frequency technology, it is able to achieve efficiencies of up to 90% with minimal power consumption.In addition to active fan cooling, the sturdy ribbed aluminum housing coated with European powder coating guarantees maximum passive cooling and therefore whisper-quiet continuous operation. INTEGRATED MULTI-STAGE BATTERY CHARGERINTEGRATED IUOU CHARGER WITH TRICKLE CHARGING With its maximum charging voltage of 14.4V, the integrated and intelligent charger is suitable for AGM, gel and LiFePo4 (with BMS) batteries as well as standard wet batteries.How it works:Charging takes place in two automatic stages, which ensure a gentle charge of the feeding batteries. At the end of the main charging phase, the integrated charger automatically switches to trickle charging. The trickle charge keeps the battery constantly at a level that is gentle on you and thus actively counteracts the natural self-discharge of the battery and premature ageing due to so-called "sulphation". This means that batteries can also be used permanently with the integrated charger of the NSC series. MAINS PRIORITY CIRCUIT OR BATTERY PRIORITY WITH INTEGRATED USV (UPS MODE)GENUINE UNINTERRUPTIBLE POWER SUPPLY (UPS) The NSC's built-in mains priority circuit allows you to switch on an external 230V power source when the batteries are empty or simply when required, without disrupting the ongoing operation of consumers. The intelligent built-in IUoU charger simultaneously charges the battery(ies) and automatically switches to trickle charging as soon as the battery(ies) are full.This is how it works:As soon as a mains voltage is registered at the AC input of the device (e.g. switching on from household current or generator), it automatically switches to mains operation + charging within a lightning-fast 16ms. The inverter feeds the mains current through and switches the inverter function to "standby". This means that all consumers can continue to be used without further intervention and without draining the battery. When the external 230V voltage is removed, the system automatically switches back to battery supply within 16ms.

Voltima MIDI fuses are high-current screw-type fuses and are ideal for protecting your systems. The fuses are suitable for voltages up to 32V and are available in sizes ranging from 30A to 200A. To match the MIDI fuses, we also offer fuse holders suitable for 1 fuse or 2 fuses. Features Very low contact resistance for high system efficiency For a maximum voltage of 32V/DC Available sizes: 30A, 40A, 50A, 60A, 80A, 100, 125A, 150A, 175A, 200A High-current screw-type fuse Scope of delivery: 1x Voltima MIDI fuse - size of your choice

The Votronic switch panel 4S 12/24 (MPN 1288) for 12V & 24V systems has been specially developed for use in motorhomes. This panel is equipped with four separate ON/OFF switches with which you can activate or deactivate different consumer groups individually. Each switch has its own indicator LED and a maximum load of 8A. Switch panel 4 S 4 ON/OFF switches, each with a load capacity of 8A, with indicator LEDConnection via screw terminalsThe connections are designed for cable cross-sections up to 4 mm²The VOTRONIC switch panel 4S 12/24 is suitable for both 12 V and 24 V Scope of delivery: 1x Votronic 1288 switch panel 4S 12/24

Please note that the solar charge controller may only be used with solar panels up to the maximum power rating (Wp) and below the maximum permissible voltage (Voc). Furthermore, the controller is not suitable for an input-side connection (+/- solar panels) of wind, water, fuel or motor generators, power supply units, batteries or other power sources. MPP solar controller for high-quality motorhomes, caravans and boats. Votronic solar controllers of the "MPP" (Maximum Power Point) series with "IU1oU2" charging characteristic are connected as a link between solar panel(s) and battery(ies). With MPP technology, the controller automatically determines the maximum power output (MPP) of the solar modules several times per second. It then transforms the excess voltage of the solar module into a higher charging current for the battery (realized by high-frequency switching controller technology with high efficiency). This additional charging current ensures shorter charging times and the best possible power utilization of the solar system. The MPP solar controllers operate fully automatically, are maintenance-free and offer the following functions: MPP charging current increase of 10 % to 30 % (efficiency > 95 %) compared to conventional controllers thanks to the use of state-of-the-art controller technology (microprocessor). The increase in performance is particularly noticeable at cooler times of the year and e.g. during high fog conditions, low and diffuse lighting (wintering).For charging lead-gel, lead-AGM, lead-acid batteries or LiFePO4 complete batteries (with integrated BMS, balancing, safety circuit and approval!) of the specified nominal voltages and the co-supply of consumers connected to these batteries in permanently installed systems with the specified battery capacities and charging programs.The charging voltage is free of peaks and regulated in such a way that overcharging of the batteries is excluded.Two battery charging outputs: Automatic charging of the main supply on-board battery (BORD I) as well as support charging and charge retention (max. 1 A) of the vehicle starter battery (Start II) with protection against overcharging.Monitoring-free charging: Standard protection against overload, overheating, reverse polarity and battery reverse discharge (if solar power is too low, e.g. at dusk, at night, etc.).Parallel/buffer operation: Compliance with charging regulations even when loads are operated simultaneously.Overcharge protection: Regulates the charging current of the battery back if there is too much solar power and the battery is full, ensures that the battery is charged to the highest possible level by immediately recharging when power is consumed."IU1oU2" charging characteristic: Defined charging voltage increase (U1) prevents harmful acid stratification (lead) and ensures equalization charging of the individual battery cells (lead and lithium), followed by automatic trickle charging (U2).Charging cable compensation: Voltage losses on the charging cables are automatically compensated for.On-board power supply filter: problem-free parallel operation with wind and motor generators, mains chargers, alternators, etc.CI bus connection: for displaying all relevant data on a central vehicle displayMeasuring output for EBL, possibly existing electrical block in the living area of the vehicle: Enables the convenient use of a (solar) current display built into the electrical block to check the solar system.Please check the compatibility of your Schaudt electrical block (EBL) and the corresponding control and display panel in advance, as we cannot accept any liability for this.Switching output "AES" (only MPP 260 CI, MPP 360 CI and MPP 440 CI): Causes refrigerators with "AES" (Automatic Energy Selector, Electrolux / Dometic) to switch automatically from gas to 12 V operation if there is a permanent abundance of excess solar power.Connection for battery temperature sensor (art. no. 2001): In the case of lead batteries, the charging voltage is automatically adjusted to the battery temperature, resulting in a better full charge of the weaker battery in cold weather and avoiding unnecessary battery gassing and stress in summer temperatures.LiFePO4 batteries: Battery protection at high and especially low temperatures, highly recommended if the battery temperature can fall below 0°C during operation.Ready to plug in for connection of the Votronic LCD Solar Computer S solar display units for optimum control of the system.