The Victron BlueSolar PWM-PRO 30A (MPN SCC010030010) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range and can therefore be used very flexibly.Free programming of all important control parameters via remote panel or USB-Link cableAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 30A max. charging current, 30A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input

The PWM-Light 48V 20A from Victron Energy (MPN SCC040020020) is a low-cost PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off at the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or batteryIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC040020020 PWM-Light 48V - 20A1x instruction manual

The PWM-Light 12V 24V 20A from Victron Energy (MPN SCC010020020) is an inexpensive PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off on the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or battery12/24V automatic detectionIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC010020020 PWM-Light 12/24V-20A1x instruction manual

The PWM-Light 12V 24V 10A from Victron Energy (MPN SCC010010000) is an inexpensive PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off on the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or battery12/24V automatic detectionIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC010010000 PWM-Light 12/24V-10A1x instruction manual

BlueSolar PWM DUO-LCD&USB 12/24V 20AVictron BlueSolar DUO- PWM solar charge controller for charging two separate batteries. For example: starter battery and service battery of a boat or caravan - Programmable charging current ratio - Charging voltage setting for three battery types (gel, AGM, lead-acid battery).Internal temperature sensor and optional remote temperature sensor Protection against overcurrent Short-circuit protection Reverse polarity protection for solar modules and/or battery. Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or battery12/24V automatic detectionIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC010020060 PWM DUO LCD&USB 12/24V-20A1x instruction manual

The Victron BlueSolar PWM-PRO 20A (MPN SCC010020110) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range, making it very flexible to use.Compared to the PWM_Light series, the BlueSolar series from Victron offers the user much more convenience and configuration options. In addition, an optional remote display is available for monitoring and configuring the controller.Free programming of all important control parameters via remote panelAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 20A max. charging current, 20A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input

The PWM-Light 12V 24V 5A from Victron Energy (MPN SCC010005000) is an inexpensive PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off on the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or battery12/24V automatic detectionIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC010005000 PWM-Light 12/24V-5A1x instruction manual

BlueSolar 12/24V PWM-Pro- Inexpensive PWM controller- Internal temperature sensor- Battery charging in three stages (constant current, constant voltage, charge retention).- Protection against overcurrent- Short-circuit protection- Reverse polarity protection for solar modules and/or battery- With output for load disconnection at low voltage- Optional remote display (only for 20 A models) BlueSolar 12/24-10 with timer 10A at 12 V or 24 V- PWM solar lighting controller - Two timers for activating operation from dusk to dawn or for operation during a limited period after nightfall and a limited period before dawn. - Seven-segment display to show timer settings and analyze fault conditions. - Battery status display with deep discharge warning function. - Internal temperature sensor. - Battery charging in three stages (constant current, constant voltage, charge retention).- Protection against overcurrent. - Short-circuit protection. - Reverse polarity protection for solar modules and/or battery - Override command to switch off the load at low voltage

The Victron BlueSolar PWM-PRO 10A (MPN SCC010010010) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range, making it very flexible to use.Compared to the PWM_Light series, the BlueSolar series from Victron offers the user much more convenience and configuration options. In addition, an optional remote display is available for monitoring and configuring the controller.Free programming of all important control parameters via remote panel or USB-Link-Cable+ PC softwareAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 10A max. charging current, 10A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input

The PWM-Light 48V 10A from Victron Energy (MPN SCC040010020) is an inexpensive PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off at the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or batteryIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC040010020 PWM-Light 48V - 10A1x instruction manual

The PWM-Light 12V 24V 10A from Victron Energy (MPN SCC010010000) is an inexpensive PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off on the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or battery12/24V automatic detectionIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC010010000 PWM-Light 12/24V-10A1x instruction manual

The PWM-Light 12V 24V 5A from Victron Energy (MPN SCC010005000) is an inexpensive PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off on the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or battery12/24V automatic detectionIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC010005000 PWM-Light 12/24V-5A1x instruction manual

The Victron BlueSolar PWM-PRO 20A (MPN SCC010020110) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range, making it very flexible to use.Compared to the PWM_Light series, the BlueSolar series from Victron offers the user much more convenience and configuration options. In addition, an optional remote display is available for monitoring and configuring the controller.Free programming of all important control parameters via remote panelAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 20A max. charging current, 20A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input

The Victron BlueSolar PWM-PRO 10A (MPN SCC010010010) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range, making it very flexible to use.Compared to the PWM_Light series, the BlueSolar series from Victron offers the user much more convenience and configuration options. In addition, an optional remote display is available for monitoring and configuring the controller.Free programming of all important control parameters via remote panel or USB-Link-Cable+ PC softwareAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 10A max. charging current, 10A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input

The Victron BlueSolar PWM-PRO 30A (MPN SCC010030010) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range and can therefore be used very flexibly.Free programming of all important control parameters via remote panel or USB-Link cableAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 30A max. charging current, 30A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input

The PWM-Light 48V 10A from Victron Energy (MPN SCC040010020) is an inexpensive PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off on the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or batteryIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC040010020 PWM-Light 48V - 10A1x instruction manual

The PWM-Light 12V 24V 20A from Victron Energy (MPN SCC010020020) is an inexpensive PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off on the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or battery12/24V automatic detectionIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC010020020 PWM-Light 12/24V-20A1x instruction manual

The PWM-Light 48V 20A from Victron Energy (MPN SCC040020020) is a low-cost PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off at the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or batteryIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC040020020 PWM-Light 48V - 20A1x instruction manual

BlueSolar PWM DUO-LCD&USB 12/24V 20AVictron BlueSolar DUO- PWM solar charge controller for charging two separate batteries. For example: starter battery and service battery of a boat or caravan - Programmable charging current ratio - Charging voltage setting for three battery types (gel, AGM, lead-acid battery).Internal temperature sensor and optional remote temperature sensor Protection against overcurrent Short-circuit protection Reverse polarity protection for solar modules and/or battery. Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or battery12/24V automatic detectionIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC010020060 PWM DUO LCD&USB 12/24V-20A1x instruction manual

The PWM-Light 48V 30A from Victron Energy (MPN SCC040030020) is an inexpensive PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off at the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or batteryIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC040030020 PWM-Light 48V - 30A1x instruction manual

BlueSolar 12/24V PWM-Pro- Inexpensive PWM controller- Internal temperature sensor- Battery charging in three stages (constant current, constant voltage, charge retention).- Protection against overcurrent- Short-circuit protection- Reverse polarity protection for solar modules and/or battery- With output for load disconnection at low voltage- Optional remote display (only for 20 A models) BlueSolar 12/24-10 with timer 10A at 12 V or 24 V- PWM solar lighting controller - Two timers for activating operation from dusk to dawn or for operation during a limited period after nightfall and a limited period before dawn. - Seven-segment display to show timer settings and analyze fault conditions. - Battery status display with deep discharge warning function. - Internal temperature sensor. - Battery charging in three stages (constant current, constant voltage, charge retention).- Protection against overcurrent. - Short-circuit protection. - Reverse polarity protection for solar modules and/or battery - Override command to switch off the load at low voltage

The SCC900300000 remote control panel from Victron Energy was specially developed for the free programming of charge controllers from the PWM-PRO family. The controllers can be fully programmed with this display - even the lighting control. The display is large enough to see everything clearly. Operation is via 5 buttons and is extremely simple and much quicker than making the settings directly on the controller.Professional functionality for the Victron PWM PRO series includedAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on higher class models. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual.The remote control is compatible with the following Victron controllers: SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A

Victron temperature sensor (MPN ) for the BlueSolar PWM-PRO series. This temperature sensor is always used when the controller and battery are not exposed to the same ambient temperature because, for example, they are in different rooms or the floor on which the battery is located is much colder than the wall on which your charge controller hangs. In such cases, the controller can perform temperature compensation during the charging process thanks to this sensor. This ensures optimum charging and can increase the service life of your battery.The temperature sensor is compatible with the following Victron controllers: SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, item no. 1-67-008445 SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, item no. 1-67-008445 SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, item no. 1-67-008445

Der Victron MPPT 75/10 (MPN SCC010010050R) gehört zur großen Familie der BlueSolar MPPT Laderegler und auch er bietet wie seine großen Geschwister bereits ultraschnelles Powertracking und kann dadurch den Ertrag Ihres Solar-Systems steigern. MPP-Tracker der neusten GenerationInsbesondere bei bedecktem Himmel, wenn die Lichtintensität sich ständig verändert, verbessert ein extrem schneller MPPT- Regler den Energieertrag im Vergleich zu PWM-Lade-Reglern um bis zu 30 % und im Vergleich zu langsameren MPPT-Reglern um bis zu 10 %.  Darüber hinaus verfügt der 75/10 über einige weitere innovative Technologien.Optionen für die Programmierung, Daten in Echtzeit und Anzeige des VerlaufsModerne Apple und Android Smartphones, Tablets, Macbooks und andere Geräte können zum Beispiel via VE.Direct mit dem Bluetooth Smart Dongles und der MPPT App oder dem GX Color Control verbunden werden. Bitte beachten Sie das Bluetooth Smart Dongles und GX Color Control eigene Artikel sind die nicht zum Lieferumfang des Ladereglers zählen sondern bei uns optional erworben werden können.wesentliche Produktmerkmale des  BlueSolar 75/10 10A 12V 24V MPPT ultraschneller MPP-Tracker der neusten Generation sorgt für bestmöglichen Ertrag auch bei bedecktem Himmelintegrierter  VE.Direct Datenkommunikationsport zum Anschluss Zur Kommunikation mit Zusatzgeräten wie Bluetooth Smart Dongle oder dem GX Color Control Panel12V 24V Systeme möglichNennladestrom 10A145W maximale PV Leistung bei 12V, 290W bei 24V SystemenLastausgang mit 10A Leistung und automatischer Lastabschaltung bei drohender Batterieunterspannung (Tiefentladeschutzintegrierter Schutz vor Batterieverpolungmehrstufiger und adaptiver Lade-Algorithmusprogrammierbarer Batterie-Ladealgorithmusintegrierter Battery Life Algorithmus verlängert das Leben Ihrer Batterien falls er aktiv ist und alle Lasten über den Lastausgang am Regler laufenTag/Nacht-Zeitsteuerung und Lichtdämmungsoption VE.Direct Datenkommunikationsport integriertVE.Direct im Text- Modus übermittelt im Sekundentakt alle wichtigen Parameter an andere Geräte die mit dem Laderegler gekoppelt sind und bietet so die Möglichkeit der Kommunikation mit Zusatzgeräten wie dem Bluetooth Smart Dongle oder dem GX Color Control Panel von Victron. Der VE.Direct-Anschluss ist für Produkte gedacht, bei denen eine vollständige CANbus-Integration (VE-Direct) zu hohe Kosten verursachen würde. Mehr Informationen zu VE.Direct finden Sie in unserer Victron Markenwelt im Infobereich.Battery Life Algorithmus trägt zur Erhöhung der Batterielebensdauer beiIst der Solar-Lade-Regler nicht in der Lage, die Batterie innerhalb eines Tages bis zu ihrer vollen Kapazität aufzuladen, wechselt der Status der Batterie ständig zwischen "teilweise geladen" und "Ende der Entladung" hin und her. Dieser Betriebsmodus (kein regelmäßiges volles Aufladen) ist für kleine Blei-Batterie optimal, insbesondere bei Bleisäure Akkus führt solch unregelmäßiges Auf- und Entladen aber schon nach einigen Monaten zu Beschädigungen an der Batterie und die Lebensdauer verkürzt sich teilweise recht deutlichDer Battery Life Algorithmus überwacht den Ladezustand der Batterie und sofern erforderlich hebt er Tag für Tag den Schwellwert zum Abtrennen der Last an (d. h., die Last wird früher abgetrennt), bis die gewonnene Energie ausreicht, um die Batterie bis auf nahezu 100 % aufzuladen. Ab diesem Punkt wird der Schwellwert für das Abschalten der Last moduliert, so dass die Aufladung zu nahezu 100 % etwa einmal wöchentlich erreicht wird.Lieferumfang1x Victron SCC010010050R BlueSolar MPPT 75/10 12V 24V 10A Laderegler