Victron BlueSolar PWM-Pro 12V 24V 5A solar charge controller (VAT-exempt)
Product information "Victron BlueSolar PWM-Pro 12V 24V 5A solar charge controller (VAT-exempt)"
BlueSolar 12/24V PWM-Pro
- Inexpensive PWM controller
- Internal temperature sensor
- Battery charging in three stages (constant current, constant voltage, charge retention).
- Protection against overcurrent
- Short-circuit protection
- Reverse polarity protection for solar modules and/or battery
- With output for load disconnection at low voltage
- Optional remote display (only for 20 A models)
BlueSolar 12/24-10 with timer 10A at 12 V or 24 V
- PWM solar lighting controller
- Two timers for activating operation from dusk to dawn or for operation during a limited period after nightfall and a limited period before dawn.
- Seven-segment display to show timer settings and analyze fault conditions.
- Battery status display with deep discharge warning function.
- Internal temperature sensor.
- Battery charging in three stages (constant current, constant voltage, charge retention).
- Protection against overcurrent.
- Short-circuit protection.
- Reverse polarity protection for solar modules and/or battery
- Override command to switch off the load at low voltage
| Artikelgewicht: | 0.13 KG |
|---|---|
| Artikelnummer: | PWMP-5 |
| Batteriespannung: | 12 V, 24 V |
| Betriebstemperatur: | -20°C bis 50°C |
| Charging current batt. I / II max. [A]: | 5A |
| Dimensions (L x W x H): | 138 x 37 x 70 |
| EAN: | 8719076025252 |
| Eingangsspannungsbereich: | 15-30V, Vbat+5 bis 28/55 V |
| Für Batterieart: | AGM (VRLA), Gel (VRLA), Nass (Flüssig) |
| Laderegler Typ: | PWM |
| Lastausgang: | Beleuchtungssteuerung, Spannungsgesteuert |
| Loading algorithm: | 3-stage |
| Max. Ladestrom: | 5 A |
| Output voltage Characteristic: | Charging characteristic |
| Schutzfunktion: | vor Batterieverpolung, Ausgangskurzschluss, Übertemperatur |
| Schutzklasse: | IP 30 |
| Solarmodul-Spannung max. [V]: | 28V, 55V |
| Solarmodul-Strom max. [A]: | 5A |
| Tension: | 12V, 24V |
Downloads "Victron BlueSolar PWM-Pro 12V 24V 5A solar charge controller (VAT-exempt)"
Login
Accessory Items
Victron remote control display for BlueSolar PWM-Pro
The SCC900300000 remote control panel from Victron Energy was specially developed for the free programming of charge controllers from the PWM-PRO family. The controllers can be fully programmed with this display - even the lighting control. The display is large enough to see everything clearly. Operation is via 5 buttons and is extremely simple and much quicker than making the settings directly on the controller.Professional functionality for the Victron PWM PRO series includedAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on higher class models. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual.The remote control is compatible with the following Victron controllers: SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A
€41.01*
Victron temperature sensor for BlueSolar PWM-Pro 2.90m
Victron temperature sensor (MPN ) for the BlueSolar PWM-PRO series. This temperature sensor is always used when the controller and battery are not exposed to the same ambient temperature because, for example, they are in different rooms or the floor on which the battery is located is much colder than the wall on which your charge controller hangs. In such cases, the controller can perform temperature compensation during the charging process thanks to this sensor. This ensures optimum charging and can increase the service life of your battery.The temperature sensor is compatible with the following Victron controllers: SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, item no. 1-67-008445 SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, item no. 1-67-008445 SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, item no. 1-67-008445
€10.08*
Victron VE.Direct TX digital output cable
The Victron VE.Direct TX Digital Output Cable (MPN ASS03055050) has been developed for use with the BlueSolar MPPT 75/15 or 100/15 in lighting applications. The 3m long cable is connected between the controller and the PWM dimmer input of the LED driver and thus enables brightness-controlled regulation of the lighting. This can significantly reduce energy consumption and system costs because the output of your lighting is dimmed either brighter or darker depending on the ambient brightness.The cable is currently only intended for use with the two Victron controllers 75/15 and 100/15. According to Victron, however, other applications will be possible in the future.Scope of delivery:1x Victron ASS030550500 VE.Direct TX digital Output Cable
€9.52*
Victron PWM-PRO to USB interface cable SCC940100200
The Victron PWM-Pro USB interface cable (MPN S9CC40100200) establishes a connection between a PC/notebook and a Victron BlueSolar PWM-Pro charge controller. Together with the free PWM-PRO configuration software, this cable opens up completely new possibilities for you in terms of control and operation. Almost all relevant settings such as charging voltage etc. can be user-defined (freely) programmed via the computer. A feature that is otherwise only found on higher class models. Specific charging and discharging voltages can be programmed on the basis of three different battery types, as well as switch-on and switch-off thresholds for the load output or the complete lighting control. All configuration options can be found in the attached software operating instructions.The PWM-PRO software and the latest drivers for Windows operating systems can be found in the product description in the product downloads.The USB link cable and the software mentioned here are compatible with the following Victron controllers: SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, item no. 1-67-008445 SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, item no. 1-67-008450 SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, item no. 1-67-008455
€11.18*