The Victron BlueSolar PWM-PRO 30A (MPN SCC010030010) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range and can therefore be used very flexibly.Free programming of all important control parameters via remote panel or USB-Link cableAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 30A max. charging current, 30A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input

The Victron BlueSolar PWM-PRO 20A (MPN SCC010020110) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range, making it very flexible to use.Compared to the PWM_Light series, the BlueSolar series from Victron offers the user much more convenience and configuration options. In addition, an optional remote display is available for monitoring and configuring the controller.Free programming of all important control parameters via remote panelAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 20A max. charging current, 20A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input

BlueSolar 12/24V PWM-Pro- Inexpensive PWM controller- Internal temperature sensor- Battery charging in three stages (constant current, constant voltage, charge retention).- Protection against overcurrent- Short-circuit protection- Reverse polarity protection for solar modules and/or battery- With output for load disconnection at low voltage- Optional remote display (only for 20 A models) BlueSolar 12/24-10 with timer 10A at 12 V or 24 V- PWM solar lighting controller - Two timers for activating operation from dusk to dawn or for operation during a limited period after nightfall and a limited period before dawn. - Seven-segment display to show timer settings and analyze fault conditions. - Battery status display with deep discharge warning function. - Internal temperature sensor. - Battery charging in three stages (constant current, constant voltage, charge retention).- Protection against overcurrent. - Short-circuit protection. - Reverse polarity protection for solar modules and/or battery - Override command to switch off the load at low voltage

The Victron BlueSolar PWM-PRO 20A (MPN SCC010020110) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range, making it very flexible to use.Compared to the PWM_Light series, the BlueSolar series from Victron offers the user much more convenience and configuration options. In addition, an optional remote display is available for monitoring and configuring the controller.Free programming of all important control parameters via remote panelAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 20A max. charging current, 20A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input

The Victron BlueSolar PWM-PRO 10A (MPN SCC010010010) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range, making it very flexible to use.Compared to the PWM_Light series, the BlueSolar series from Victron offers the user much more convenience and configuration options. In addition, an optional remote display is available for monitoring and configuring the controller.Free programming of all important control parameters via remote panel or USB-Link-Cable+ PC softwareAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 10A max. charging current, 10A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input

The Victron BlueSolar PWM-PRO 30A (MPN SCC010030010) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range and can therefore be used very flexibly.Free programming of all important control parameters via remote panel or USB-Link cableAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 30A max. charging current, 30A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input

BlueSolar 12/24V PWM-Pro- Inexpensive PWM controller- Internal temperature sensor- Battery charging in three stages (constant current, constant voltage, charge retention).- Protection against overcurrent- Short-circuit protection- Reverse polarity protection for solar modules and/or battery- With output for load disconnection at low voltage- Optional remote display (only for 20 A models) BlueSolar 12/24-10 with timer 10A at 12 V or 24 V- PWM solar lighting controller - Two timers for activating operation from dusk to dawn or for operation during a limited period after nightfall and a limited period before dawn. - Seven-segment display to show timer settings and analyze fault conditions. - Battery status display with deep discharge warning function. - Internal temperature sensor. - Battery charging in three stages (constant current, constant voltage, charge retention).- Protection against overcurrent. - Short-circuit protection. - Reverse polarity protection for solar modules and/or battery - Override command to switch off the load at low voltage

The Victron BlueSolar PWM-PRO 10A (MPN SCC010010010) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range, making it very flexible to use.Compared to the PWM_Light series, the BlueSolar series from Victron offers the user much more convenience and configuration options. In addition, an optional remote display is available for monitoring and configuring the controller.Free programming of all important control parameters via remote panel or USB-Link-Cable+ PC softwareAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 10A max. charging current, 10A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input