Noqon NPC4 6V/12V battery charger with 4A charging current The car battery charger is an 11-step car battery charger suitable for charging and trickle charging 6V or 12V lead-acid batteries (batteries) with liquid electrolyte (WET), maintenance-free lead-acid batteries (MF), gel electrolyte (GEL) or electrolyte-absorbing mats (AGM). Select the desired charging voltage (6V or 12V) and the microprocessor-controlled charger takes care of everything fully automatically until the charging cycle is complete and the batteries are fully charged. The German-language display is easy to understand and convenient to operate. Thanks to the test function, battery charge levels can be determined before charging and the integrated memory function continues the charging process even after power interruptions without having to start from the beginning. There aresix charging programs to choose from. Fully automatic battery charging takes place in 11 charging steps. Modern safety technology with reverse polarity protection, overheating protection, overload protection and short-circuit protection protects you and the device from incorrect operation. Two cables with quick connectors and comfort plugs (permanent charging cable with eyelets for fixed installation & charging cable with clamps) are included with the jet-proof and dust-proof device (protection class IP65). Features: Suitable for continuous charging Test function/battery tester Memory function 6 charging programs 11 charging steps Technical data: Specification: at 12 V: 3.8 A / 0.8 A, 6 V: 0.8 A, microprocessor-controlled Power supply: 230V, 50 Hz220V - 240V, 50Hz Charging voltage: 7.2V/7.4V ±0.25 VDC - 14.4V/14.7V ±0.25 VDC Rated output current: 6V: 0.8A ±10% / 12V: 0.8A / 3.8A ±10% Current consumption: Max. 0.9 A / 230 V Charger type: 11 charging steps, automatic charging cycle Ambient temperature: -10 to +40 °C Reverse current: 0.2 mA after completion of charging (if charger remains connected to 230 V) 50 mA if charger disconnected from 230 V. Battery type: 6V & 12V lead-acid batteries (Wet, MF, GEL, EFB, AGM) Recommended battery capacity: 6V: 1.2 - 14Ah / 12V: 1.2 - 120Ah Protection class: IP65, protected against water jets Protection: Reverse polarity, thermal and overload protection, time control Scope of delivery: 1 x Noqon NPC4 battery charger 1 x crocodile clips 1 x quick contact cable with ring terminals

Noqon NPC8 battery charger 12V/24V with 8A charging current The car battery charger is an 11-step car battery charger suitable for charging and trickle charging 12V or 24V lead-acid batteries (batteries) with liquid electrolyte (WET), maintenance-free lead-acid batteries (MF), gel electrolyte (GEL) or electrolyte-absorbing mats (AGM). Select the desired charging voltage (12V or 24V) and the microprocessor-controlled charger takes care of everything fully automatically until the charging cycle is complete and the batteries are fully charged. The German-language display is easy to understand and convenient to operate. Thanks to the test function, battery charge levels can be determined before charging and the integrated memory function continues the charging process even after power interruptions without having to start from the beginning. There aresix charging programs to choose from. Fully automatic battery charging takes place in 11 charging steps. Modern safety technology with reverse polarity protection, overheating protection, overload protection and short-circuit protection protects you and the device from incorrect operation. Two cables with quick connectors and comfort plugs (permanent charging cable with eyelets for fixed installation & charging cable with clamps) are included with the jet-proof and dust-proof device (protection class IP65). Features: Suitable for continuous charging Test function/battery tester Memory function 6 charging programs 11 charging steps Technical data: Specification: at 12 V: 3.8 A / 0.8 A, 6 V: 0.8 A, microprocessor-controlled Power supply: 220V - 240V, 50Hz Charging voltage: 14.4V/14.7V ±0.25 VDC, 28.8V/29.4V ±0.25 VDC Rated output current: 12V: 2A / 8A ±10% - 24V: 4A ±10% Current consumption: Max. 0.9 A / 230 V Charger type: 11 charging steps, automatic charging cycle Ambient temperature: -10 to +40 °C Battery type: 12V & 24V lead-acid batteries (Wet, MF, GEL, EFB, AGM) Recommended battery capacity: 12V: 2.2 - 180Ah / 24V: 14 - 120Ah Protection class: IP65, protected against water jets Protection: Reverse polarity, thermal and overload protection, time control Scope of delivery: 1 x Noqon NPC8 battery charger 1 x crocodile clips 1 x quick contact cable with ring terminals

Plastic-compatible special grease based on lime soap. Protects battery terminals and electrical contacts from corrosion and oxidation. For safe starting, bright lighting and longer battery life. Prevents acid damage, is compatible with plastics and prevents leakage currents. Prevents the contact resistance from increasing during operation and ensures a lower loss than with untreated contacts. Labeled according to DIN 51502 K2G-30. Temperature range: -30 °C to +100 °C.

Elbow with hose for central gas discharge (cut to size) Connection diameter = 6 mm Hose diameter = approx. 8 mm Hose inner diameter = approx. 5 mm Hose length = approx. 500 mm

Main functions:1. real-time display battery current, temperature and voltage.2. automatically test the vehicle's starting and charging systems.3. send alarm notification when the battery is abnormal.4. 4 devices support multi-device connection and can be monitored on the same page.5. record the lane, cost and driving habits of each trip and can be exported to the Excel file.6. automatically note the parking position and provide the CAR FINDER function via navigation.7. store historical data up to 30 days ( voltage, charge percentage and temperature ) in the device. 8. store unlimited historical data in the app. Basic functions:1.Notify users when the charge is low.2.check the charging history in graph mode.3.display the battery charge level in real time.4.Near-full perception to be notified automatically.Support cell phones: All iOS and Android smartphones with Bluetooth 4.0iOS ( iPhone 4S, 5, 5C, 5S and above; iPad 2, iPad Air, iPad mini, iPad mini 2 and above )Android: At least Android 4.3 ( support for Bluetooth 4.0 phones )Vehicle coverageAll 12V batteries, including motorcycle, car, SUVs, MPVs, light trucks, trucks and boats.Including lead-acid, AGM, GEL and EPB batteries.Package included:1 piece x BM6 battery monitorWeight: 30g Technical data:1. product name: battery monitor2. bluetooth version: 4.23. bluetooth name: BM64. input voltage: DC 6V ~ 20V5. voltage accuracy ( 9V ~ 16V ): ± 0,03 V.6. average working current: 1.5 mA7. working temperature: -40 ° C ~ 90 ° C ( -40 ° F ~ 194 ° F )8. reverse connection protection: built-in9. short circuit protection: Built-in10. waterproof: IP6711. physical dimensions: ( L ) 55 mm x ( W ) 41 mm x ( H ) 12.5 mm

BM2 is a kind of automatic battery monitor for all 12V car batteries, woks via Bluetooth and cell phone APP to check the battery status and relative systems in the cars. Before use, the APP must be uploaded to yoursYou can also use the QR code on the automatic battery monitor to download the app.Main functions: Notify users when the charge is low Automatically receive a notification about the battery status when the user is near the battery, you do not need to run the app. Check the charging system ( ) Check the starting of the TAG1 system ( when the engine starts every time Check historical data graphically Record the start time, end time and duration for each trip Short circuit and reverse connection protection Fireproof shell and wire Automatic synchronization when switching on Bluetooth range Compatible with all 12V vehicle batteries. Free app for iOS and Android. Support cell phones: All iOS and Android smartphones with Bluetooth 4.0iOS ( iPhone 4S, 5, 5C, 5S and higher; iPad 2, iPad Air, iPad mini, iPad mini 2 and higher )Android: At least Android 4.3 ( support for Bluetooth 4.0 phones )Vehicle coverageAll 12V batteries, including motorcycle, car, SUVs, MPVs, light trucks, trucks and boats.Including lead-acid, AGM, GEL and EPB batteries.Scope of delivery:1 piece x BM2 battery monitor Weight: 40gTechnical data:1. product name: battery monitor2. bluetooth version: 4.03. bluetooth name: BM24. input voltage: DC 6V ~ 20V5. voltage accuracy ( 9V ~ 16V ): ± 0,03 V.6. average working current: 1.5 mA7. working temperature: -40 ° C ~ 90 ° C ( -40 ° F ~ 194 ° F )8. reverse connection protection: built-in9. short circuit protection: Built-in10. waterproof: IP6711. physical dimensions: ( L ) 55 mm x ( W ) 35 mm x ( H ) 16 mm

Battery disconnector 6 V, 12 V, 24 V The battery isolating switch is suitable for preventing short circuits and unwanted battery discharge. The battery disconnector is connected to the negative terminal. Advantages: Max. Max. load capacity: 100 A Operating voltage: 6 Volt/ 12 Volt/ 24 Volt Size (LxWxH): approx. 8.5 x 3.5 x 3.5 cm Single-pole battery isolating switch Interrupts the entire circuit by simply turning the knob Prevents battery discharge, electrical fires, unauthorized operation, etc. Battery disconnect switch is connected to the pole Avoids tedious unscrewing of battery cables when charging Quick and easy installation Application: MOTOR VEHICLES Caravan and motorhome

Voltic VTC886 Easy Click battery clamps

Voltic VTZ304 Standard battery terminals

Voltic VTC227 Peugeot battery terminals M8

Voltic VTC227 Peugeot battery terminals M10