Fine stranded wire made from bare copper wires Core insulation based on PVC You purchase: 1 meter of cable with a cross-section of your choice Colors red, black, blue or green-yellow All ordered quantities are delivered in one piece. Product properties: Flame retardant according to IEC 60332-1-2 Technical data: Approvals: HD 21/VDE 0281 Insulation Specific volume resistance: > 20 GOhm x cm Conductor construction: Fine-stranded according to VDE 0295 Class 5/ IEC 60228 Class 5 Minimum bending radius: According to HD 516 at 20°C ±10°C cable temperature Rated voltage: U0/U: 450/750 V Test voltage: 2500 V Current carrying capacity: VDE 0298 Part 4 Temperature range: Permanently installed: -30°C to +80°C

Cable lugs TYPE A-M are made of electrolytic copper tube (SE-Cu according to DIN 13600). The tube wall thickness guarantees the best electrical conductivity and mechanical protection against vibrations and conductor pull-out. Our cable lugs are annealed to guarantee optimum ductility; this is essential as the cable lugs have to withstand severe deformation during crimping and the usual twisting of the lug during use. The connectors must also ensure reliable contact in the event of oscillations and vibrations. Under these circumstances, hardness plays a decisive role in preventing breaks and cracks. The inspection hole ensures that the conductor is inserted correctly. The sleeve length has been chosen to ensure easy and correct positioning between the crimping inserts during crimping.

A practical quick connector for batteries that are difficult to reach or concealed. The eyelet terminals are fitted to the battery, making connection child's play without the operator having to actually reach the battery. Comfort Connect eyelets are available in three different sizes for different battery terminal sizes. Checks the charging status of hard-to-reach batteries, M8 8.4 mm eyelet The indicator makes it easy to monitor the battery charge status. The exact battery result is displayed two hours after the vehicle has been parked. Functions Red: The battery voltage is below 12.4 V. It is definitely time to recharge the battery. Yellow: The battery voltage is between 12.4 and 12.65 V. It is time to recharge the battery. Green: The battery voltage is above 12.65 V. OK! No need to charge.

A practical quick connector for batteries that are difficult to reach or hidden away. The eyelet terminals are fitted to the battery, making it very easy to connect without the operator having to actually reach the battery. Cable with M6 6.4 mm eyelet for quick and easy connection without clamps Functions Eyelet terminal M6 6.4 mm

The LCD Charge Control S is a convenient, easy-to-use control and operating element that displays the status of the individual charging sources, the current charging phase, the voltage of the on-board and starter battery and the current charging current. In solar mode, the displays for the current solar power (W) and the energy counters (Wh and Ah, can be reset to "zero" at any time) are also available for your own statistical purposes. With the VBCS or VAC Triple, the mains charging mode can be switched on or off manually or reduced in terms of power (AC power limit) at the touch of a button, e.g. if the shore power is too weak. A special protective function ensures that an inadvertently switched off mains charge is reactivated if the on-board battery is in danger of being deeply discharged. The large, clear display has an illuminated and easy-to-read display with very low power consumption. The plug and play connection means it can be easily retrofitted at any time, even retrospectively, and its compact design means it can be installed in almost any location. The product has the following features: Compatible with VOTRONIC VBCS chargersLarge, clear displayBright, white illuminated displayDisplay of the active charging source mains/charging converter/solarControl of the mains charging function, AC power limit Display of battery charging phasesVoltage and charging current displaysSolar computer function

CTEK Comfort Connect extension cable 2.5m Extension Extends the possible distance from the charger to the vehicle or enables the socket to be moved to a more practical location for charging (e.g. in the cockpit).

Battery temperature sensor with 3 m connection cable and M8 mounting hole. Potted against environmental influencesSuitable for all VOTRONIC automatic chargers of the Pb and VAC series, VCC charging converters and solar controllers of the SR and MPP series.

A practical quick connector for batteries that are difficult to reach or hidden away. The eyelet terminals are fitted to the battery, making connection child's play without the operator having to actually reach the battery. Comfort Connect - Eyelet are available in three different sizes for different battery terminal sizes. Eyelet: M10 (10.4 mm) Cable length for all models: 40 cm Cable with M8 8.4 mm eyelet for quick and easy connection without clamps Functions Eyelet clamp M8 8.4 mm

Practical clamp for your CTEK charger

Perfectly suited for cars, motorcycles, boats, lawnmowers, jet skis, etc. It can remain permanently connected and is therefore always able to indicate when the battery needs recharging.

The Comfort M8 connector is designed for mounting on the battery with eyelets - Eyelet diameter 8.4 mm - Cable length 0.55 m - Illuminated microdiodes indicate three levels of battery status - 15 A fuse

Votronic remote control S suitable for automatic chargers of the Pb and VAC series. If the device is difficult to access, the control LEDs provide a remote display of the device status and charging progress. One of the respective main device functions can be remote-controlled with the switch, e.g. silent run (night mode) for chargers in the Pb and VAC series. The remote control is designed as a panel version and matches the other displays of the VOTRONIC module system both visually and mechanically (same height 85 mm). Product details Automatic loaders Pb series Automatic loaders VAC series Made in Germany Technical data Dimensions 85x47mm Installation dimensions 65x35 (max. depth 16 mm) Weight 23g Test mark CE, E-test (EMC/vehicle directive) Scope of delivery Connection cable 5m long, ready to plug in on both sides for device connection, fixing screws, drilling template

Cable for checking the battery status via a 12-volt socket INDICATOR CIG PLUG is a combination of quick connector and indicator for easy charging. Perfect for checking the charge status and charging the battery via the vehicle's 12V socket. Suitable for all 12 V chargers from CTEK up to 8 A. INDICATOR CIG PLUG is a universal device for 12 and 21 mm sockets. Note: The socket must be supplied with power even if the ignition switch is in the "off" position. Functions Red: The battery voltage is below 12.4 V. It is definitely time to recharge the battery. Yellow: The battery voltage is between 12.4 and 12.65 V. It is time to recharge the battery. Green: The battery voltage is above 12.65 V. OK! No need to charge.

Modular cable 6-pin as before but without connectorSuitable for: Battery computer, ammeter, solar display, solar computer, remote controls for Automatic Charger, MobilPOWER Inverter etc.Length: 5 mModular cable 6-pin WITHOUT connector

M6 eyelets and display panel for checking the battery status Functions Red: The battery voltage is below 12.4 V. It is definitely time to recharge the battery. Yellow: The battery voltage is between 12.4 and 12.65 V. It is time to recharge the battery. Green: The battery voltage is above 12.65 V. OK! No need to charge.

Durable silicone rubber protection for chargers with 3.8 to 5 A Suitable for use with all CTEK chargers with 3.8-5.0 A.

The Votronic 2088 temperature sensor 625 is functionally identical to the temperature sensor 825, but the 625 is designed for M6 screw terminals. The temperature sensor is supplied with a 3 m connection cable. The sensor is encapsulated and thus optimally protected against environmental influences. Suitable for the following Votronic articles: Automatic chargers of the Pb and VAC seriesVCC series charging convertersSolar controllers of the SR and MPP series Scope of delivery: 1x Votronic 2088 temperature sensor 625 M6

Das Victron RJ45 UTP ist verwendbar mit den Victron Kommunikations-Ports VE.Bus, VE.CAN, VE.Net und VE9bitRS485 und dient der Vernetzung von Victron Produkten mit entsprechenden Fähigkeiten. Es ist in verschiedenen Längen von 0,3m bis 30m lieferbar. Unten sehen Sie eine Auflistung aller verfügbaren Längen. 0,3m Victron MPN ASS0300649000,9m Victron MPN ASS0300649201,8m Victron MPN ASS0300649503m Victron MPN ASS0300649805m Victron MPN ASS03006500010m Victron MPN ASS03006501015m Victron MPN ASS03006502020m Victron MPN ASS03006503025m Victron MPN ASS03006504030m Victron MPN ASS030065050

The Victron Energy battery connection clamps (BPC900400014) are used to safely connect batteries with pole terminals and Victron's battery chargers with DC connection, such as the Blue Power IP 65 series. In addition to the tap-off clamps, the cable has a fuse holder with an integrated 30A flat fuse. Scope of delivery:1x Victron BPC900400014 battery connection clamps with fuse holder and 30A fuse

Durable silicone rubber protection for chargers with 0.8 A Suitable for use with all CTEK chargers with 0.8A.

CTEK Comfort Connect Cig Plug cigarette lighter cable

Supplying devices and accessories with power via the battery CONNECT CIG SOCKET is a useful accessory for extending the range of applications of the CTEK CONNECT battery connection. After connecting CONNECT CIG SOCKET, you can operate navigation systems, cell phones, grip heaters, heated clothing, etc. 1 m cable length. Functions CTEK quick connectors may only be used with CTEK 12 V chargers in the 0.8-10 A range CONNECT and INDICATOR accessories are not suitable for CTEK models with white plastic connectors. Please use the quick connectors labeled Extra Cord Set for these models.

Suitable for all automatic chargers in the Pb and VAC series. The single-color green LED indicates the operational readiness of the charger and the mains/power supply. The remote indicator can be mounted at any desired location (both in a clearly visible position in the interior such as the dashboard or similar, as well as in the exterior, e.g. near the driver's door or similar) via an 8 mm hole. An associated sealing ring ensures IP67 tightness. The plug-in 5 m long connection cable ensures direct connection of the electronic unit to chargers from the Pb, VAC, VAC-F, VAC-F II and VAC-Duo series. Scope of delivery: 0.4 m long red/black connecting leads Connection adapter Connection cable 5m long, ready to plug in on both sides for device connection sealing ring union nut

Robust clamps for quick connection to the battery, shows the battery status. INDICATOR CLAMP uses simple traffic light symbols to indicate the charge status of your battery. Easy to switch between vehicles - ideal for workshops and showrooms. When charging is required, the cap can be removed from the device and a compatible CTEK charger plugged in to fully recharge the battery. Cable length 1.5 m. Functions Red: The battery voltage is below 12.4 V. It is definitely time to recharge the battery. Yellow: The battery voltage is between 12.4 and 12.65 V. It is time to recharge the battery. Green: The battery voltage is above 12.65 V. OK! No need to charge.