Victron 58V Sicherung vom Typ Megafuse zur Absicherung von 48V Geräten. Es stehen 4 Leistungsklassen zur Verfügung: 125A, 200A. 225A oder 300A sind verfügbar. Diese Sicherungen eigenen sich hervorragend um große 48V Wechselrichter oder Laderegler zuverlässig abzusichern. wählbare Größen und die wichtigsten technischen Eckdaten 125A 58V / 48V DC, Victron CIP137125010 200A 58V / 48V DC, Victron CIP137200010 225A 58V / 48V DC, Victron CIP137250010 300A 58V / 48V DC, Victron CIP137300010 passende Mega-SicherungshalterPassend zu den oben aufgelisteten Megasicherungen können folgende Megafuse Sicherungshalter verwendet werden: Victron Standard Mega-Sicherung Halter, CIP000100001 Victron modularer Mega-Sicherung Halter mit Deckel, CIP100200100 passende Sammelschienen wenn mehr als ein Sicherungskreis existiert Für den modularen Sicherungshalter stehen zur Erweiterung ausserdem 2 Busbars bereit mit deren Hilfe Sie über eine Sammelschiene bis zu 6 Hochstromkreise individuell absichern können: Victron Busbar 5, CIP100400060 - für max. 500A und 5 modulare Sicherungshalter Victron Busbar 6, CIP100400070 - für max. 1500A und 6 modulare Sicherungshalter Lieferumfang: 1x Victron 58V / 48V DC Mega-Sicherung nach Wahl

Victron DC Sicherungen Mega-Sicherungen für Betriebsspannungen bis maximal 32V. Ideal für die Verwendung als Sicherung am Batteriekabel von Spannungswandlern und Wechselrichtern oder auch Ladereglern mit hohen Ladeströmen.verschiedene Mega-Sicherungshalter (auch modular) verfügbarPassend zu den oben aufgelisteten Megasicherungen können folgende Victron Sicherungshalter verwendet werden:standard Mega-Sicherung Haltermodularer Mega-Sicherung Halter mit DeckelFür den Modulare Sicherungshalter stehen zu erweiterung ausserdem 2 Busbars bereit mit deren Hilfe Sie bis zu 6 Hochstromkreise individuell absichern können:Victron Busbar 5 CIP100200100 - für max 500A und 5 modulare SicherungshalterVictron Busbar 6 CIP100200100 - für max 1500A und 6 modulare SicherungshalterLieferumfang:1x Victron DC Mega-Sicherung nach Wahl

Das Victron RJ45 UTP ist verwendbar mit den Victron Kommunikations-Ports VE.Bus, VE.CAN, VE.Net und VE9bitRS485 und dient der Vernetzung von Victron Produkten mit entsprechenden Fähigkeiten. Es ist in verschiedenen Längen von 0,3m bis 30m lieferbar. Unten sehen Sie eine Auflistung aller verfügbaren Längen. 0,3m Victron MPN ASS0300649000,9m Victron MPN ASS0300649201,8m Victron MPN ASS0300649503m Victron MPN ASS0300649805m Victron MPN ASS03006500010m Victron MPN ASS03006501015m Victron MPN ASS03006502020m Victron MPN ASS03006503025m Victron MPN ASS03006504030m Victron MPN ASS030065050

MIDI Fuse DC fuse from Victron. This is a fuse that is housed in a fire-retardant plastic casing. This fuse therefore offers a high level of safety. With a maximum permissible operating voltage of 58V, this fuse is ideally suited for protecting 48V devices such as inverters. Suitable as a fuse for 58V devices Official designation of the fuse type: MIDI-Fuse recommended accessories: ictron MIDI-Fuse fuse holder Scope of delivery: 1x Victron (CIP133060000) 60A 58V midi fuse

The Victron Energy battery connection clamps (BPC900400014) are used to safely connect batteries with pole terminals and Victron's battery chargers with DC connection, such as the Blue Power IP 65 series. In addition to the tap-off clamps, the cable has a fuse holder with an integrated 30A flat fuse. Scope of delivery:1x Victron BPC900400014 battery connection clamps with fuse holder and 30A fuse

The VE.Direct Cable from Victron is required to connect devices that are to communicate with each other via the VE-Direct port. For example, the BlueSolar controllers and the MPPT Control remote control panel. The following connections can be established with it: Victron BlueSolar MPPT controller to Victron Color Control GX panelVictron BlueSolar MPPT controller to MPPT Control remote control unitBMV70xxx series to Color Control GX PanelBMV60xxx series for Color Control GX PanelPhoenix Inverter 12V 24V 48V 250W-500W to Color Control GX Panel The VE.Direct cables are not included with these device series and are available in lengths from 0.3 to 10m. Scope of delivery: 1x Victron VE.Direct Cable

The Multiplus-II 48/3000/35-32 GX is a high-end device combination from Victron Energy (MPN PMP482306000) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50 A and extends the potential range of use to ESS applications. The inverter module delivers a full 3000 W with a non-linear load and 2400 W with a linear continuous load. The 48 V battery charger is also very well proportioned with 35 A charging power and is supplemented by a 32 A transfer switch, which can be used to switch back and forth between the AC connections at lightning speed. Compared to the other devices in the series, the GX variants have an integrated GX display with numerous other connection options.Important features of the Multiplus-II 48/3000/35-32 GXIntegrated GX control unit with various communication connectionsPowerControl and PowerAssist to increase mains or generator outputbuilt-in anti-islanding function and connection option for external current sensor (optional)can be used as a backup device in grid-connected systems for power supply in the event of grid failurescan be used in various ESS (Energy Storage System) applicationsideally suited for professional seafaring, yachts, vehicles and land-based, off-grid applicationsVE.Bus interface for parallel and three-phase operation, remote monitoring and system integrationpractically unlimited power thanks to parallel and three-phase operationcan be configured on site or remotely using VEConfigure software*Technical features3000W power with non-linear load 2400 W continuous load and 6000 W peak powerfor 48 V battery voltage, 32 A transfer switch and 35 A battery chargerOutput voltage: 230 VAC, frequency: 50 HzMax. efficiency is 95%, protection class IP22Always enough power thanks to PowerControl and PowerAssistA maximum mains or generator current can be set on the MultiPlus-II 48/3000/35-32 GX. The MultiPlus-II then takes account of other connected AC consumers and only uses the power that is still “left over” to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The PowerAssist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such cases, the MultiPlus-II immediately compensates for insufficient generator, shore power or mains power with energy from the battery. If the load is reduced, i.e. consumers are switched off, the available energy can then be used to recharge the batteries.Solar power: alternating current even in the event of a mains failureThe device can be used with both off-grid and grid-connected PV systems as well as other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters.Maximum flexibility thanks to two AC outputsThe main output ensures uninterrupted operation. In the event of a mains failure or an interruption in the shore/generator current, the MultiPlus-II takes over the supply to the connected loads. The switchover takes place so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when alternating current is available at the input of the MultiPlus-II. Consumers that must not discharge the battery, such as a water heater, can be connected to this output.Scope of the integrated GX deviceA VE.Can interface This can be used to connect VE.Can devices from Victron (e.g. VE.Can MPPT). The connection can also be reconfigured via the remote console for use with a compatible CAN bus Li-ion battery.1xUSB connection1x Ethernet connection1x VE.Direct connectionMany options for system expansionThe settings can be changed within a few minutes using the VEConfigure software (a computer or laptop and an MK3 USB interface are required) and several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, Digital Multi control panel.Remote configuration and monitoringInstall a Color Control GX or other GX products to connect to the Internet. The operating data can be stored and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed.Scope of delivery:1x Victron PMP482306000 Multiplus-II 48/3000/35-32 GX 230 V1x operating instructions

The Multiplus-II 48/5000/70-50 GX is a high-end device combination from Victron Energy (MPN PMP482506000) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50 A and extends the potential range of use to ESS applications. The inverter module delivers a full 5000 W with a non-linear load and 4000 W with a linear continuous load. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, which can be used to switch back and forth between the AC connections at lightning speed. Compared to the other devices in the series, the GX variants have an integrated GX display with numerous other connection options.Important features of the Multiplus-II 48/5000/70-50 GXIntegrated GX control unit with various communication connectionsPowerControl and PowerAssist to increase mains or generator outputbuilt-in anti-islanding function and connection option for external current sensor (optional)can be used as a backup device in grid-connected systems for power supply in the event of grid failurescan be used in various ESS (Energy Storage System) applicationsideally suited for professional seafaring, yachts, vehicles and land-based, off-grid applicationsVE.Bus interface for parallel and three-phase operation, remote monitoring and system integrationpractically unlimited power thanks to parallel and three-phase operationcan be configured on site or remotely using VEConfigure software* Technical features5000W power with non-linear load 4000 W continuous load and 9000 W peak powerfor 48 V battery voltage, 50 A transfer switch and 70 A battery chargerOutput voltage: 230 VAC, frequency: 50 Hzmax. efficiency is 95%, protection class IP22 Always enough power thanks to PowerControl and PowerAssistA maximum mains or generator current can be set on the MultiPlus-II 48/5000/70-50 GX. The MultiPlus-II then takes account of other connected AC consumers and only uses the power that is still "left over" to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The PowerAssist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such cases, the MultiPlus-II immediately compensates for insufficient generator, shore power or mains power with energy from the battery. If the load is reduced, i.e. consumers are switched off, the available energy can then be used to recharge the batteries.Solar power: alternating current even in the event of a mains failureThe device can be used with both off-grid and grid-connected PV systems as well as other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters.Maximum flexibility thanks to two AC outputsThe main output ensures uninterrupted operation. In the event of a mains failure or an interruption in the shore/generator current, the MultiPlus-II takes over the supply to the connected loads. The switchover takes place so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when alternating current is available at the input of the MultiPlus-II. Consumers that must not discharge the battery, such as a water heater, can be connected to this output.Scope of the integrated GX deviceA VE.Can interface This can be used to connect VE.Can devices from Victron (e.g. VE.Can MPPT). The connection can also be reconfigured via the remote console for use with a compatible CAN bus Li-ion battery.1xUSB connection1x Ethernet connection1x VE.Direct connectionMany options for system expansionThe settings can be changed within a few minutes using the VEConfigure software (a computer or laptop and an MK3 USB interface are required) and several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, Digital Multi control panel.Remote configuration and monitoringInstall a Color Control GX or other GX products to connect to the Internet. The operating data can be stored and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed.Scope of delivery:1x Victron PMP482506000 Multiplus-II 48/5000/70-50 GX 230V1x operating instructions

MIDI Fuse DC fuse from Victron. This is a fuse that is housed in a fire-retardant plastic casing. This fuse therefore offers a high level of safety. With a maximum permissible operating voltage of 58V, this fuse is ideally suited for protecting 48V devices such as inverters. Suitable as a fuse for 58V devices Official designation of the fuse type: MIDI-Fuse recommended accessories: ictron MIDI-Fuse fuse holder Scope of delivery: 1x Victron (CIP133060000) 60A 58V midi fuse

This Victron RJ12 UTP cable (MPN ASS030066003) is required to connect a BMV shunt to the BMV monitor. An RJ12 cable is usually supplied with the BMV monitor, but if this is too short or too long, you can replace it with this cable.Product features:Plug type: RJ12 on both sidesLength 0.3 metersScope of delivery:1x Victron RJ12 UTP cable 0.3m

The Multiplus-II 48/5000/70-50 GX is a high-end device combination from Victron Energy (MPN PMP482506000) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50 A and extends the potential range of use to ESS applications. The inverter module delivers a full 5000 W with a non-linear load and 4000 W with a linear continuous load. The 48 V battery charger is also very well proportioned with 70 A charging power and is supplemented by a 50 A transfer switch, which can be used to switch back and forth between the AC connections at lightning speed. Compared to the other devices in the series, the GX variants have an integrated GX display with numerous other connection options.Important features of the Multiplus-II 48/5000/70-50 GXIntegrated GX control unit with various communication connectionsPowerControl and PowerAssist to increase mains or generator outputbuilt-in anti-islanding function and connection option for external current sensor (optional)can be used as a backup device in grid-connected systems for power supply in the event of grid failurescan be used in various ESS (Energy Storage System) applicationsideally suited for professional seafaring, yachts, vehicles and land-based, off-grid applicationsVE.Bus interface for parallel and three-phase operation, remote monitoring and system integrationpractically unlimited power thanks to parallel and three-phase operationcan be configured on site or remotely using VEConfigure software* Technical features5000W power with non-linear load 4000 W continuous load and 9000 W peak powerfor 48 V battery voltage, 50 A transfer switch and 70 A battery chargerOutput voltage: 230 VAC, frequency: 50 Hzmax. efficiency is 95%, protection class IP22 Always enough power thanks to PowerControl and PowerAssistA maximum mains or generator current can be set on the MultiPlus-II 48/5000/70-50 GX. The MultiPlus-II then takes account of other connected AC consumers and only uses the power that is still "left over" to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The PowerAssist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such cases, the MultiPlus-II immediately compensates for insufficient generator, shore power or mains power with energy from the battery. If the load is reduced, i.e. consumers are switched off, the available energy can then be used to recharge the batteries.Solar power: alternating current even in the event of a mains failureThe device can be used with both off-grid and grid-connected PV systems as well as other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters.Maximum flexibility thanks to two AC outputsThe main output ensures uninterrupted operation. In the event of a mains failure or an interruption in the shore/generator current, the MultiPlus-II takes over the supply to the connected loads. The switchover takes place so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when alternating current is available at the input of the MultiPlus-II. Consumers that must not discharge the battery, such as a water heater, can be connected to this output.Scope of the integrated GX deviceA VE.Can interface This can be used to connect VE.Can devices from Victron (e.g. VE.Can MPPT). The connection can also be reconfigured via the remote console for use with a compatible CAN bus Li-ion battery.1xUSB connection1x Ethernet connection1x VE.Direct connectionMany options for system expansionThe settings can be changed within a few minutes using the VEConfigure software (a computer or laptop and an MK3 USB interface are required) and several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, Digital Multi control panel.Remote configuration and monitoringInstall a Color Control GX or other GX products to connect to the Internet. The operating data can be stored and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed.Scope of delivery:1x Victron PMP482506000 Multiplus-II 48/5000/70-50 GX 230V1x operating instructions

The Multiplus-II 48/3000/35-32 GX is a high-end device combination from Victron Energy (MPN PMP482306000) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and PowerAssist functions to 50 A and extends the potential range of use to ESS applications. The inverter module delivers a full 3000 W with a non-linear load and 2400 W with a linear continuous load. The 48 V battery charger is also very well proportioned with 35 A charging power and is supplemented by a 32 A transfer switch, which can be used to switch back and forth between the AC connections at lightning speed. Compared to the other devices in the series, the GX variants have an integrated GX display with numerous other connection options.Important features of the Multiplus-II 48/3000/35-32 GXIntegrated GX control unit with various communication connectionsPowerControl and PowerAssist to increase mains or generator outputbuilt-in anti-islanding function and connection option for external current sensor (optional)can be used as a backup device in grid-connected systems for power supply in the event of grid failurescan be used in various ESS (Energy Storage System) applicationsideally suited for professional seafaring, yachts, vehicles and land-based, off-grid applicationsVE.Bus interface for parallel and three-phase operation, remote monitoring and system integrationpractically unlimited power thanks to parallel and three-phase operationcan be configured on site or remotely using VEConfigure software*Technical features3000W power with non-linear load 2400 W continuous load and 6000 W peak powerfor 48 V battery voltage, 32 A transfer switch and 35 A battery chargerOutput voltage: 230 VAC, frequency: 50 HzMax. efficiency is 95%, protection class IP22Always enough power thanks to PowerControl and PowerAssistA maximum mains or generator current can be set on the MultiPlus-II 48/3000/35-32 GX. The MultiPlus-II then takes account of other connected AC consumers and only uses the power that is still “left over” to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The PowerAssist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such cases, the MultiPlus-II immediately compensates for insufficient generator, shore power or mains power with energy from the battery. If the load is reduced, i.e. consumers are switched off, the available energy can then be used to recharge the batteries.Solar power: alternating current even in the event of a mains failureThe device can be used with both off-grid and grid-connected PV systems as well as other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters.Maximum flexibility thanks to two AC outputsThe main output ensures uninterrupted operation. In the event of a mains failure or an interruption in the shore/generator current, the MultiPlus-II takes over the supply to the connected loads. The switchover takes place so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic devices is guaranteed. The second output only supplies power when alternating current is available at the input of the MultiPlus-II. Consumers that must not discharge the battery, such as a water heater, can be connected to this output.Scope of the integrated GX deviceA VE.Can interface This can be used to connect VE.Can devices from Victron (e.g. VE.Can MPPT). The connection can also be reconfigured via the remote console for use with a compatible CAN bus Li-ion battery.1xUSB connection1x Ethernet connection1x VE.Direct connectionMany options for system expansionThe settings can be changed within a few minutes using the VEConfigure software (a computer or laptop and an MK3 USB interface are required) and several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart Dongle), battery monitor, Digital Multi control panel.Remote configuration and monitoringInstall a Color Control GX or other GX products to connect to the Internet. The operating data can be stored and viewed free of charge on our VRM (Victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed.Scope of delivery:1x Victron PMP482306000 Multiplus-II 48/3000/35-32 GX 230 V1x operating instructions