Fine stranded wire made from bare copper wires Core insulation based on PVC You purchase: 1 meter of cable with a cross-section of your choice Colors red, black, blue or green-yellow All ordered quantities are delivered in one piece. Product properties: Flame retardant according to IEC 60332-1-2 Technical data: Approvals: HD 21/VDE 0281 Insulation Specific volume resistance: > 20 GOhm x cm Conductor construction: Fine-stranded according to VDE 0295 Class 5/ IEC 60228 Class 5 Minimum bending radius: According to HD 516 at 20°C ±10°C cable temperature Rated voltage: U0/U: 450/750 V Test voltage: 2500 V Current carrying capacity: VDE 0298 Part 4 Temperature range: Permanently installed: -30°C to +80°C

Main functions:1. real-time display battery current, temperature and voltage.2. automatically test the vehicle's starting and charging systems.3. send alarm notification when the battery is abnormal.4. 4 devices support multi-device connection and can be monitored on the same page.5. record the lane, cost and driving habits of each trip and can be exported to the Excel file.6. automatically note the parking position and provide the CAR FINDER function via navigation.7. store historical data up to 30 days ( voltage, charge percentage and temperature ) in the device. 8. store unlimited historical data in the app. Basic functions:1.Notify users when the charge is low.2.check the charging history in graph mode.3.display the battery charge level in real time.4.Near-full perception to be notified automatically.Support cell phones: All iOS and Android smartphones with Bluetooth 4.0iOS ( iPhone 4S, 5, 5C, 5S and above; iPad 2, iPad Air, iPad mini, iPad mini 2 and above )Android: At least Android 4.3 ( support for Bluetooth 4.0 phones )Vehicle coverageAll 12V batteries, including motorcycle, car, SUVs, MPVs, light trucks, trucks and boats.Including lead-acid, AGM, GEL and EPB batteries.Package included:1 piece x BM6 battery monitorWeight: 30g Technical data:1. product name: battery monitor2. bluetooth version: 4.23. bluetooth name: BM64. input voltage: DC 6V ~ 20V5. voltage accuracy ( 9V ~ 16V ): ± 0,03 V.6. average working current: 1.5 mA7. working temperature: -40 ° C ~ 90 ° C ( -40 ° F ~ 194 ° F )8. reverse connection protection: built-in9. short circuit protection: Built-in10. waterproof: IP6711. physical dimensions: ( L ) 55 mm x ( W ) 41 mm x ( H ) 12.5 mm

Fine stranded wire made from bare copper wires Core insulation based on PVC You purchase: 1 meter of cable with a cross-section of your choice Colors red and black All ordered quantities are delivered in one piece. Product properties: Flame retardant according to IEC 60332-1-2 Technical data: Approvals: HD 21/VDE 0281 Insulation Specific volume resistance: > 20 GOhm x cm Conductor construction: Fine-stranded according to VDE 0295 Class 5/ IEC 60228 Class 5 Minimum bending radius: According to HD 516 at 20°C ±10°C cable temperature Rated voltage: U0/U: 450/750 V Test voltage: 2500 V Current carrying capacity: VDE 0298 Part 4 Temperature range: Permanently installed: -30°C to +80°C

VOLTIMA temperature sensor TS1 The VOLTIMA temperature sensor TS1 can be connected to an MPPT solar charge controller and thus ensures optimized charging of the battery. The temperature sensor also prevents problems with battery degassing. Suitable for the following solar charge controllers: - VOLTIMA SCD12 MPPT solar charge controller Dual 12V 165Wp 50V 12A - VOLTIMA SCD25 MPPT solar charge controller Dual 12V 350Wp 50V 25A - VOLTIMA SCN20 MPPT solar charge controller 12V/24V 240Wp/480Wp 50V 20A - VOLTIMA SCN40 MPPT solar charge controller 12V/24V 480Wp/960Wp 50V 40A

Test winner of the charger comparison test of Autobild (issue 43/2010). Ctek battery charger suitable for all types of 12V lead-acid batteries (wet, maintenance-free, AGM, calcium/calcium and gel batteries) The MXS 5.0 is a charger equipped with the latest technology, which was previously reserved for CTEK professional devices. The charger solves a range of battery problems; it is the perfect charger for users with the highest demands. The MXS 5.0 offers a range of features, such as battery diagnostics that indicate whether the battery can accept and hold a charge, a special reconditioning function that recovers deeply discharged batteries with acid stratification, a unique maintenance charging function, a mode for optimized charging on cold winter days and the ability to charge demanding AGM batteries (i.e. Optima). The unique display allows the user to follow the entire charging process. The MXS 5.0 is a fully automatic 8-stage charger with a selectable charging current between 0.8 A and 5 A for 12V batteries from 1.2 - 110Ah and for maintenance charging up to 160Ah. The charger has protection class IP65 (protected against dust and splash water), was built to protect vehicle electronics systems, is protected against sparks, reverse polarity and short circuits. Details: Desulphation Perfect charge and charge retention Unique regeneration of deeply discharged batteries CTEK's 8-stage now visible via LED display Electronics safe Splashproof and dustproof (IP 65) Pulse charge retention GS tested

BM2 is a kind of automatic battery monitor for all 12V car batteries, woks via Bluetooth and cell phone APP to check the battery status and relative systems in the cars. Before use, the APP must be uploaded to yoursYou can also use the QR code on the automatic battery monitor to download the app.Main functions: Notify users when the charge is low Automatically receive a notification about the battery status when the user is near the battery, you do not need to run the app. Check the charging system ( ) Check the starting of the TAG1 system ( when the engine starts every time Check historical data graphically Record the start time, end time and duration for each trip Short circuit and reverse connection protection Fireproof shell and wire Automatic synchronization when switching on Bluetooth range Compatible with all 12V vehicle batteries. Free app for iOS and Android. Support cell phones: All iOS and Android smartphones with Bluetooth 4.0iOS ( iPhone 4S, 5, 5C, 5S and higher; iPad 2, iPad Air, iPad mini, iPad mini 2 and higher )Android: At least Android 4.3 ( support for Bluetooth 4.0 phones )Vehicle coverageAll 12V batteries, including motorcycle, car, SUVs, MPVs, light trucks, trucks and boats.Including lead-acid, AGM, GEL and EPB batteries.Scope of delivery:1 piece x BM2 battery monitor Weight: 40gTechnical data:1. product name: battery monitor2. bluetooth version: 4.03. bluetooth name: BM24. input voltage: DC 6V ~ 20V5. voltage accuracy ( 9V ~ 16V ): ± 0,03 V.6. average working current: 1.5 mA7. working temperature: -40 ° C ~ 90 ° C ( -40 ° F ~ 194 ° F )8. reverse connection protection: built-in9. short circuit protection: Built-in10. waterproof: IP6711. physical dimensions: ( L ) 55 mm x ( W ) 35 mm x ( H ) 16 mm

Battery connection cable / pole connector 25mm² or 35mm² or 50mm² 40cm long with M8 connection on both sides for connecting batteries

With the main switch / battery selector switch, two batteries can be switched on and off simultaneously and controlled separately to reduce power consumption when the device, vehicle or boat is not in use. The switch is suitable for automotive electronics, electrical products and all types of 12V/24V/36V vehicles, boats, motorhomes, etc.The practical rotary switch is very easy to operate and works smoothly. With switch position 1 or 2 one of the connected batteries can be switched on, with 1 & 2 both are connected to the circuit and OFF (red) means both batteries are switched off. When the device or vehicle is not in use, the switch can be used to safely disconnect the connection between the battery and the electrical product, thus reducing energy consumption. Features Suitable for 12V/24V/36VContinuous current 12V DC: 200AIntermittent current 12V DC: 300AMaximum current (short-term): 1000AWeight: 260gSelector switch dimensions: 69 x 69 x 74mmDimensions for the 4 removable cable glands: 45 x 20mmConnection terminal: M8 Guard and locking service The switch can be used as an independent unit or in parallel with other switches. It can effectively protect the power supply, reduce battery loss and extend battery life. The switch is non-removable. Durable material The selector switch is made of CE-certified, high-quality ABS flame-retardant reinforced nylon and silver-plated red copper bolts. It is resistant to moisture, UV and ageing and has a long service life. The rear cover is insulated to prevent short circuits, meet safety requirements and effectively prevent electrical accidents. Easy installation The battery selector switch can be installed quickly and easily. Attention must be paid to the arrangement of the positive and negative wires, then install the corresponding lining plate and tighten the four screws to prevent the cable connector from being exposed to the air and oxidized. Scope of delivery: 1x battery switch4x removable side plate1x base plate4x screw4x nut

DHC analog battery tester 100A 6V/12V

Plastic-compatible special grease based on lime soap. Protects battery terminals and electrical contacts from corrosion and oxidation. For safe starting, bright lighting and longer battery life. Prevents acid damage, is compatible with plastics and prevents leakage currents. Prevents the contact resistance from increasing during operation and ensures a lower loss than with untreated contacts. Labeled according to DIN 51502 K2G-30. Temperature range: -30 °C to +100 °C.

Noqon NPC4 6V/12V battery charger with 4A charging current The car battery charger is an 11-step car battery charger suitable for charging and trickle charging 6V or 12V lead-acid batteries (batteries) with liquid electrolyte (WET), maintenance-free lead-acid batteries (MF), gel electrolyte (GEL) or electrolyte-absorbing mats (AGM). Select the desired charging voltage (6V or 12V) and the microprocessor-controlled charger takes care of everything fully automatically until the charging cycle is complete and the batteries are fully charged. The German-language display is easy to understand and convenient to operate. Thanks to the test function, battery charge levels can be determined before charging and the integrated memory function continues the charging process even after power interruptions without having to start from the beginning. There aresix charging programs to choose from. Fully automatic battery charging takes place in 11 charging steps. Modern safety technology with reverse polarity protection, overheating protection, overload protection and short-circuit protection protects you and the device from incorrect operation. Two cables with quick connectors and comfort plugs (permanent charging cable with eyelets for fixed installation & charging cable with clamps) are included with the jet-proof and dust-proof device (protection class IP65). Features: Suitable for continuous charging Test function/battery tester Memory function 6 charging programs 11 charging steps Technical data: Specification: at 12 V: 3.8 A / 0.8 A, 6 V: 0.8 A, microprocessor-controlled Power supply: 230V, 50 Hz220V - 240V, 50Hz Charging voltage: 7.2V/7.4V ±0.25 VDC - 14.4V/14.7V ±0.25 VDC Rated output current: 6V: 0.8A ±10% / 12V: 0.8A / 3.8A ±10% Current consumption: Max. 0.9 A / 230 V Charger type: 11 charging steps, automatic charging cycle Ambient temperature: -10 to +40 °C Reverse current: 0.2 mA after completion of charging (if charger remains connected to 230 V) 50 mA if charger disconnected from 230 V. Battery type: 6V & 12V lead-acid batteries (Wet, MF, GEL, EFB, AGM) Recommended battery capacity: 6V: 1.2 - 14Ah / 12V: 1.2 - 120Ah Protection class: IP65, protected against water jets Protection: Reverse polarity, thermal and overload protection, time control Scope of delivery: 1 x Noqon NPC4 battery charger 1 x crocodile clips 1 x quick contact cable with ring terminals

Battery temperature sensor with 3 m connection cable and M8 mounting hole. Potted against environmental influencesSuitable for all VOTRONIC automatic chargers of the Pb and VAC series, VCC charging converters and solar controllers of the SR and MPP series.

Robust and versatile battery connection cableThe cable is suitable for connecting a battery with M8 round terminals to a device that also has an M8 screw terminal. This includes the following device classes:Compatible with all inverters with M8 connections.Compatible with all M8 battery terminalsAll other devices such as charge controllers, inverters or battery chargers that have an M8 screw terminal and are to be connected to a battery with the same terminalCharacteristicsLength: 1m or 2mConnections: M8 -> M8Cable cross-section: 16mm² or 25mm² or 35mm² or 50mm²Core color: red / blackSuitable for installation in dry and damp rooms and vehiclesSuitable for applications with medium mechanical stressOil, cold and UV-resistant, flame-retardantNote and accessories recommendationTo select the correct connection cable, always follow the instructions in the operating instructions for the device to be connected. The cable cross-section must be selected so that the power loss is max. 2%. You can find additional accessories such as mega fuse holders and mega fuses in our online store.Scope of delivery:Battery connection cable - 2 single wires red / black

VARTA Powerzone VPZ-LOAD 5000 Plus The Varta Powerzone VPZ-LOAD 5000 Plus charger takes away all your worries about your car battery. Whether you have an AGM, GEL, lead-acid, VRLA or wet battery, this charger will charge it for you. It has an advanced and intelligent microprocessor that controls the charging process. In addition, automatic diagnostic, rescue, charging, maintenance and charge retention functions are fully covered by the VPZ-LOAD 5000 Plus. Removing or disconnecting the car battery is no longer necessary with this device. Set the required battery voltage manually and connect the charger to the battery. If everything has been set correctly, the Varta VPZ-LOAD 5000 Plus charger will carry out the necessary measures for proper and gentle charging. You can also leave the charger permanently connected to the battery (when stationary) using the charge retention function. If the charger detects a defect or an incorrect setting, an error (display: "ER-X") is displayed. Safety functions To guarantee complete safety during charging, the charger is equipped with extensive safety functions. These safety functions provide protection for/against: Reverse polarity short circuits overheating Overcharge protection overvoltage Charging with defective batteries (automatic charge termination) Sparking Charging stages The charger has a 7-stage charging control, which is controlled and regulated by a microprocessor. This means that the charging stages are set automatically depending on the battery condition. Stage 1 - DiagnosisStage 2 - Pre-chargingStage 3 - SoftStartStage 4 - Main charging phaseStage 5 - Saturation chargingStage 6 - Rest/overgrowth phaseStage 7 - Continuous charge maintenance Technical data Charging voltage: 6V / 12V Max. charging current: 5ASupported batteries: AGM, GEL, lead-acid, lead-calcium, VRLA, ML, SLArecommended capacity: 2Ah-110AhLength: 150mmWidth: 80mmheight: 45mmWeight: 0.8kg Scope of delivery 1x charger Varta Powerzone VPZ LOAD 5000 Plus1x pole terminal adapter 0.6m1x ring terminal adapter 0.6m1x cigarette lighter adapter 0.6m1x extension 3m1x detailed operating instructions

In order to deliver maximum performance, your powersport vehicle must be in the best possible condition. Powersport vehicles are often not used for long periods of time. The CT5 POWERSPORT ensures that your powersport vehicle is always ready for use by providing its battery with a trickle charge. The CT5 POWERSPORT has been specially developed for charging and maintaining Powersport batteries and, thanks to its advanced technology, offers three fully automatic charging and maintenance programs. Normal: Suitable for all types of lead-acid batteries, including AGM, lithium*: For lithium* batteries and reconditioning. If required, it can be connected directly and indefinitely to the battery, ensuring that the battery is neither overcharged nor undercharged. The charger is easy to use and supports all types of Powersport batteries with a working voltage of 12 V. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP) Functions Practical and easy to use Testing and restoring the battery capacity output current: max. 2.3 A non-sparking reverse polarity protected short-circuit proof

Voltic VTC227 Peugeot battery terminals M8

Voltic VTC227 Peugeot battery terminals M10

The Automatic-Charger Pb 1215 SMT 2B from Votronic (MPN 3100) is a modern battery charger for mobile use. It has charging programs for GEL, AGM, acid and modern lithium batteries and is designed for 12V battery voltage. The charging current at the main output is 15A. There is also a secondary charging output for the starter battery, which can supply an additional 2A charging current. The device is suitable for batteries with a capacity of 38Ah to 170Ah.Important features of the Pb 1215 SMT 2B battery charger reliably charges GEL, AGM, acid and LiFePO4 batteries 15A charging current, 2A charging current at the auxiliary charging output Official Votronic part number: 3100 Charging options: 1 supply battery and 1 starter battery The charging voltage is free of peaks and regulated in such a way that overcharging of the batteries is ruled out. Fully automatic continuous operation: The charger can be permanently connected to the battery and keeps it fully charged. In the event of a power failure, the batteries are not discharged (disconnection by safety switch). Lithium LiFePO4 maintenance, auto wake-up, maintenance phase: Regular automatic activation of battery cell balancing every 10 days to ensure that the battery is always fully charged. Lead battery regeneration twice a week during long downtimes to prevent harmful acid stratification. Parallel and buffer operation: The battery continues to be charged or kept fully charged during simultaneous consumption. The charger automatically calculates and monitors the adjustment of the charging times. Monitoring-free charging: Multiple protection against overload, overheating, overvoltage, short circuit, polarity reversal, malfunction and battery back-discharge through electronic cut-off up to complete disconnection of charger and battery by built-in safety switches. Connection for battery temperature sensor (accessory temperature sensor 825, art. no. 2001): With lead batteries (acid, gel, AGM), the charging voltage is automatically adjusted to the battery temperature, resulting in a better full charge of the weaker battery in cold weather and avoiding unnecessary battery gassing and thus battery stress in summer temperatures. With LiFePO4 batteries, the battery temperature sensor is required for the function: It serves to protect the battery at high and especially at low temperatures below 0°C. Silent Run function: Noise-optimized operation at the touch of a button (night mode). Power supply unit function: Enables consumers to be supplied without a battery (e.g. battery replacement). Charging cable compensation: Voltage losses on the charging cables are automatically compensated for. Built-in on-board mains filter: Problem-free parallel operation with solar systems, wind and petrol generators, alternators etc. on one battery. Charging aid for deeply discharged lead batteries: Gentle pre-charging of the (lead-acid, -gel, -AGM) battery up to 8 V, then powerful support for the battery if consumers are still switched on. Disconnection of the batteries in the event of mains failure, overheating, malfunction (safety switch per charging output). Separate auxiliary charging output "S" for supporting and trickle charging the vehicle starter battery. Overview of the charging programs of the Pb 1215 SMT 2B"Gel": Charging program for gel batteries, characteristic curve IU1oU2oU3 Adapted to sealed, gas-tight gel/dryfit batteries with fixed electrolyte, which generally require a higher charging voltage level and longer U1 holding times in order to achieve short charging times with particularly high capacity storage and to avoid long-term battery "starvation"."AGM": Charging program for AGM/fleece batteries, characteristic curve IU1oU2oU3 Intended for charging sealed, gas-tight AGM (Absorbent Glass Mat) batteries in lead-fleece technology, which require a particularly high U1 level with coordinated holding times for full charging and then a moderate U2 level for charge retention (plate and round cell technology). ."UNIVERSAL": Charging program for lead-acid/wet/AGM batteries, characteristic curve IU1oU2oU3 Universal program for charging and charge retention of acid batteries in vehicles (mixed mobile/stationary). With a medium U1 level, still offers short charging times, a good charge factor and good acid mixing for open and closed, low-maintenance, maintenance-free standard, traction, lighting, solar and heavy-duty batteries, as well as AGM batteries with a normal U1 level."LiFePO4": Charging program for lithium batteries, characteristic curve IU1oU2oU3 Charging program tailored to lithium LiFePO4 batteries with their own BMS and prescribed or built-in protective circuitry. A special rest maintenance function automatically keeps the LiFePO4 battery at a charge level of 50-80% when the vehicle is parked (seasonal operation), which is beneficial for the service life, and also buffers 12 V consumers and the vehicle starter battery. In addition, a regular Auto Wake UP function activates the battery cell balancing.Scope of delivery:1X Votronic 3100 Pb 1215 SMT 2B battery charger1x operating instructions (German)

With the battery disconnect switch, your battery can be safely disconnected to reduce power consumption when the device, vehicle or boat is not in use. The switch is suitable for automotive electronics, electrical products and all types of 12V/24V vehicles, boats, motorhomes, etc. The practical rotary switch is very easy to use and works smoothly. ON (green) means switching on the circuit and OFF (red) means switching off. Switch the power supply on or off safely to avoid electric shock. Features Suitable for 12V / 24VContinuous current 12V DC: 275AIntermittent current 12V DC: 455AInstantaneous current 12V DC: 1250AWeight: 260gDimensions of disconnector: 69 x 69 x 75mmDimensions for the 4 removable cable glands: 45 x 20mm Guard and locking service The switch can be used as an independent unit or in parallel with other switches. It can effectively protect the power supply, reduce battery loss and extend battery life. Durable material The disconnect switch is made of CE-certified, high-quality ABS flame-retardant reinforced nylon and silver-plated red copper bolts. It is resistant to moisture, UV and ageing and has a long service life. The rear cover is insulated to prevent short circuits, meet safety requirements and effectively prevent electrical accidents. Easy installation The battery isolator can be installed quickly and easily. Attention must be paid to the arrangement of the positive and negative wires, then install the corresponding lining plate and tighten the four screws to prevent the cable connector from being exposed to the air and oxidized. Scope of delivery: 1x battery switch1x bottom cover4x screws + nuts for fastening

The VOTRONIC Battery Protector 40 is connected between the supply battery and the consumer and is suitable for all lead-acid battery types (acid, gel, AGM) and makes. They protect the battery from dangerous deep discharge as well as the consumers and equipment from undervoltage and overvoltage and, controlled by an external switch, can also serve as a remote-controlled battery master switch. The reset to normal operation takes place automatically as soon as the voltage has risen again, e.g. to 12.5 V, due to battery recovery or brief charging. The switch-off can also be canceled manually using the "EMERGENCY ON" function. The Battery Protector 40 can be operated remotely via the "Sensor +" terminal using a simple switch (1-pole ON / OFF). This makes it a powerful battery main switch. The EMERGENCY ON function can also be operated remotelyImportant product features Switching current 40 A, briefly overloadable up to 60 A, externally visible switching status display EMERGENCY STOP function via switch on the device, can also be operated remotely via external switch Automatic reset as soon as the battery voltage returns to the normal range (charging) Separate sensor cable and switching thresholds with hysteresis and timer functions for trouble-free operation Bistable power relay, very low power consumption, less than 3 mA (according to EN 13976) No self-consumption when switched off via external switch, e.g. remote control as main battery switch Solid screw terminals for battery and load cable cross-sections up to 10 mm² "Motor" version with higher switch-off thresholds maintains the starting capability of emergency vehicles with only one battery circuit in accordance with DIN EN 1789 Technical data MPN 3075 Operating voltage: 12V Switching current (continuous/short): 40A/60A Switching threshold undervoltage: 10.7V Undervoltage reset point: 12.8V Overvoltage protection (off/on): 15.5V / 15V Weight: 97 grams

The VOTRONIC Battery Protector 40 Motor is connected between the supply battery and the consumer and is suitable for all lead-acid battery types (acid, gel, AGM) and makes. They protect the battery from dangerous deep discharge as well as the consumers and equipment from undervoltage and overvoltage and, controlled by an external switch, can also serve as a remote-controlled battery master switch. Compared to the "normal" Battery Protector 40, the motor version switches to undervoltage at 11.8V. The reset to normal operation takes place automatically as soon as the voltage has risen again, e.g. to 12.5 V, due to battery recovery or brief charging. The switch-off can also be canceled manually using the "EMERGENCY ON" function. The Battery Protector 40 can be operated remotely via the "Sensor +" terminal using a simple switch (1-pole ON / OFF). This makes it a powerful battery main switch. The EMERGENCY ON function can also be operated remotely Important product features Switching current 40 A, briefly overloadable up to 60 A, externally visible switching status displayEMERGENCY STOP function via switch on the device, can also be operated remotely via external switchAutomatic reset as soon as the battery voltage returns to the normal range (charging)Separate sensor cable and switching thresholds with hysteresis and timer functions for trouble-free operationBistable power relay, very low power consumption, less than 3 mA (according to EN 13976)No self-consumption when switched off via external switch, e.g. remote control as main battery switchSolid screw terminals for battery and load cable cross-sections up to 10 mm²"Motor" version with higher switch-off thresholds maintains the starting capability of emergency vehicles with only one battery circuit in accordance with DIN EN 1789Technical data MPN 3075Operating voltage: 12VSwitching current (continuous/short): 40A/60ASwitching threshold undervoltage: 11.8VUndervoltage reset point: 12.8VOvervoltage protection (off/on): 15.5V / 15VWeight: 97 grams

BETACLEAN Cleaner 3350, 125mlCleaner for removing grease and dirt residues from plastic, metal, paint and glass. Base: HeptaneThe BETACLEAN cleaners from Dow Automotive impress with their ease of use: they clean surfaces quickly, effectively and safely. The BETACLEAN cleaners are certainly used in the automotive industry, where they are used to clean windows and contact surfaces when replacing windows (e.g. when installing front and other fixed windows) and remove excess, uncured urethane adhesive residues, among other things. All BETACLEAN products are compatible with BETASEAL adhesive and BETAPRIME primer.

Elbow with hose for central gas discharge (cut to size) Connection diameter = 6 mm Hose diameter = approx. 8 mm Hose inner diameter = approx. 5 mm Hose length = approx. 500 mm

Sturdy battery connection cable set. The cable is suitable for connecting a battery with M6, M8 or M10 round terminals to a device that has a screw terminal connection. This cable set can be used to connect batteries to devices such as solar charge controllers, inverters and battery chargers with a screw terminal connection. The cross-section and size of the cable lugs are freely selectable. Please refer to the device manufacturer's instructions for use to select the cable cross-section. Technical dataLength: 2m Scope of delivery: 1 x battery connection cable wire red 2m1 x battery connection cable wire black 2m