Der Smartsolar MPPT 150/85-MC4 von Victron Energy (MPN SCC115085411), gehört zur neusten Generation smarter Solarregler des niederländischen Premium-Herstellers und verarbeitet satte 85A Solarstrom und kann flexibel mit 12/24/36/48 V Batterien arbeiten. Ultraschnelles Powertracking und automatische Power-Point Erkennung bei Teil-Verschattung sind nur 2 der vielen Highlights dieser neuen Geräteklasse. Den SmartSolar 150/85-MC4 gibt es auch als Version mit 35mm2 Schraubklemmen-Anschlüssen auf der Solar-Seite des Ladereglers statt MC4 Stecker. Außerdem beherrscht dieses Model den Parallelbetrieb mit anderen Reglern des gleichen Typs. Im Vergleich zur BlueSolar Serie ist bei der Smartsolar Familie das Bluetooth-Modul bereits fest im Regler integriert was den Smart-Dongle bei diesem Gerät überflüssig macht. Neu ist auch das optional erhältliche LCD Display, welches auf den SmartSolar 150/85-MC4 einfach bei Bedarf aufgesteckt werden kann. Das Display liefert dann alle wichtigen Informationen rund um den Regler smarte Datenkommunikation über VE.Direct und blitzschnelles Bluetooth Moderne Apple und Android Smartphones, Tablets, Macbooks und andere Geräte können dank des fest-integriertem Bluetooth-Modul und der kostenlosen Victron Connect APP verbunden werden. Die App kann dann zur Konfiguration vieler wichtiger Funktionen des MPPT 150/85-MC4 SmartSolar Reglers eingesetzt werden. Natürlich liefert Sie auch alle wichtigen Parameter wie den aktuellen Solarertrag in Echtzeit. automatische Erkennung des Maximum Power Point bei Teilverschattung Im Falle einer Teil-Verschattung können auf der Strom-Spannungskurve zwei oder mehr Punkte maximaler Leistung (MPP) vorhanden sein. Herkömmliche MPPTs neigen dazu, sich auf einen lokalen MPP einzustellen. Dieser ist jedoch womöglich nicht der optimale MPP. Der innovative Algorithmus des SmartSolar 150/85-MC4 wird den Energieertrag immer maximieren, indem er sich auf den optimalen MPP einstellt. wesentliche Produktmerkmale des SmartSolar 150/85-MC4 85A 12V 24V 36V 48V MPPT ultraschneller MPP-Tracker der neusten Generation sorgt für bestmöglichen Ertrag auch bei bedecktem Himmel Nennladestrom 85A, 150V maximale PV-Leerlaufspannung maximale PV-Leistung: 12V 1200W / 24V 2400W / 48V 4900W Victron Energy Teilenummer (MPN): SCC115085411 automatische Erkennung der MPP Spannung bei Teilverschattung sorgt für eine weitere Ertragsverbesserung gegenüber "einfacher" MPPT Laderegler mit optionalem LCD Display fest integriertes Bluetooth Modul für App gestützte Analyse und Konfiguration des Reglers (über kostenlose Victron App auf kompatiblen Geräten) optionales LCD-Display verfügbar integrierter VE.Direct Datenkommunikationsport zum Anschluss Zur Kommunikation mit Zusatzgeräten dem GX Color Control Panel oder einem Smart BMV Batteriemonitor hoher Maximalwirkungsgrad von 98% Parallel-Betrieb mit anderen 150/85-MC4 Reglern möglich regulierbare Konstantladespannung regulierbare Erhaltungsladespannung geeignet für alle AGM, GEL, Blei-Säure Kalzium-Kalzium und Lithium Batterien voll programmierbare Lade-Algorithmen die später manuell über einen Schalter am Gehäuse aktiviert und umgeschalten werden integrierter Schutz vor Batterieverpolung mehrstufiger und adaptiver Lade-Algorithmus ferngesteuertes Ein- und Ausschalten über 2-poligen Stecker möglich Schutzgrad IP 43 für die elektronischen Bauteile und Schutzart IP 22 für den Anschlussbereich des Reglers integrierter Temperatursensor gleicht Erhaltungs- und Konstantladespannung nach Temperatur aus Tag/Nacht-Zeitsteuerung und Lichtdämmungsoption High-Speed MPP-Tracker der neusten Generation Insbesondere bei bedecktem Himmel, wenn die Lichtintensität sich ständig verändert, verbessert ein extrem schneller MPPT- Regler den Energieertrag im Vergleich zu PWM-Lade-Reglern um bis zu 30 % und im Vergleich zu langsameren MPPT-Reglern um bis zu 10 %. umfangreicher elektronischer Schutz Schutz vor verpolten Batterieanschluss PV-Rückstromsperre Schutz vor Überhitzung des Geräts Schutz vor Kurzschlüssen Schutz vor verpolten PV-Anschluss der VE.Direct Datenkommunikationsport VE.Direct im Text- Modus übermittelt im Sekundentakt alle wichtigen Parameter an andere Geräte, die mit dem Laderegler gekoppelt sind und bietet so die Möglichkeit der Kommunikation mit Zusatzgeräten Systempanel GX Color Control. Der VE.Direct-Anschluss ist für Produkte gedacht, bei denen eine vollständige Canbus-Integration (VE-Direct) zu hohe Kosten verursachen würde. Mehr Informationen zu VE.Direct finden Sie in unserem Victron Energy Markenshop. Lieferumfang1x Victron SCC010085310 SmartSolar MPPT 150/85-MC4 12V 24V 36V 48V 85A LadereglerBedienungsanleitung

The Smartsolar MPPT 150/70-tr from Victron Energy (MPN SCC115070210) is part of the latest generation of smart solar controllers from the Dutch premium manufacturer and processes a whopping 70A of solar power and can work flexibly with 12/24/36/48 V batteries. Ultra-fast power tracking and automatic power point detection in the event of partial shading are just two of the many highlights of this new device class. The SmartSolar 150/70-tr is also available as a version with MC4 connections on the solar side of the charge controller instead of screw terminals. This model can also be operated in parallel with other controllers of the same type. Compared to the BlueSolar series, the Bluetooth module is already integrated in the controller of the Smartsolar family, making the smart dongle superfluous for this device. Another new feature is the optional LCD display, which can simply be attached to the SmartSolar 150/70-tr as required. The display then provides all the important information about the controller Smart data communication via VE.Direct and lightning-fast Bluetooth Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free Victron Connect APP. The app can then be used to configure many important functions of the MPPT 150/70-tr SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time. Automatic detection of the maximum power point in the event of partial shading In the event of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP. However, this may not be the optimum MPP. The innovative algorithm of the SmartSolar 150/70-tr will always maximize the energy yield by adjusting to the optimal MPP. Key product features of the SmartSolar 150/70-tr 70A 12V 24V 36V 48V MPPT ultra-fast MPP tracker of the latest generation ensures the best possible yield even under cloudy skies nominal charging current 70A, 150V maximum PV open-circuit voltage maximum PV power: 12 V 1000 W / 24 V 2000 W / 48 V 4000 W Victron Energy part number (MPN): SCC115070210 automatic detection of the MPP voltage in the event of partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllers with optional LCD display permanently integrated Bluetooth module for app-supported analysis and configuration of the controller (via free Victron app on compatible devices) Optional LCD display available integrated VE.Direct data communication port for connecting the GX Color Control Panel or a Smart BMV battery monitor for communication with additional devices High maximum efficiency of 98% Parallel operation with other 150/70-tr controllers possible Adjustable constant charging voltage Adjustable float charge voltage suitable for all AGM, GEL, lead-acid, calcium-calcium and lithium batteries fully programmable charging algorithms which are later activated and switched manually via a switch on the housing integrated protection against reverse battery polarity Multi-stage and adaptive charging algorithm remote-controlled switching on and off possible via 2-pin plug IP 43 degree of protection for the electronic components and IP 22 degree of protection for the connection area of the controller Integrated temperature sensor balances maintenance and constant charging voltage according to temperature Day/night time control and light dimming option High-speed MPP tracker of the latest generation An extremely fast MPPT controller improves the energy yield by up to 30 % compared to PWM charging controllers and by up to 10 % compared to slower MPPT controllers, especially under cloudy skies when the light intensity is constantly changing. Comprehensive electronic protection Protection against reverse polarity battery connection PV reverse current block Protection against overheating of the device Protection against short circuits Protection against reverse polarity PV connection The VE.Direct data communication port VE.Direct in text mode transmits all important parameters every second to other devices that are coupled with the charge controller and thus offers the possibility of communication with additional devices Systempanel GX Color Control. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron Energy brand store. Scope of delivery1x Victron SCC115070210 SmartSolar MPPT 150/70-tr 12V 24V 36V 48V 70A charge controllerOperating instructions

Victron SmartSolar MPPT 150/100-MC4 Solar Charge Controller 12/24/36/48V (VAT-exempt)The SmartSolar MPPT 150/100-MC4 from Victron Energy (MPN SCC115110511) is part of the latest generation of smart solar charge controllers from the Dutch premium manufacturer. It handles a powerful 100A solar current and works flexibly with 12V, 24V, 36V, and 48V batteries. Ultra-fast power tracking and automatic power point detection in partial shading conditions are just two of the many highlights of this new device class.The SmartSolar 150/100-MC4 is also available in a version with 35mm² screw terminal connections on the solar side instead of MC4 connectors. Additionally, this model supports parallel operation with other controllers of the same type.Integrated Bluetooth & Optional LCD DisplayCompared to the BlueSolar series, the SmartSolar family has a built-in Bluetooth module, eliminating the need for a Smart Dongle. A new optional LCD display can be easily attached to the SmartSolar 150/100-MC4, providing all essential information about the controller at a glance.Smart Data Communication via VE.Direct & Fast BluetoothModern Apple and Android smartphones, tablets, MacBooks, and other devices can be connected via the integrated Bluetooth module using the free Victron Connect App. This app allows configuration of key functions and real-time monitoring of important parameters, such as current solar yield.Maximum Power Point Detection in Partial ShadingIn cases of partial shading, there may be multiple Maximum Power Points (MPPs) on the current-voltage curve. Traditional MPPT controllers tend to settle on a local MPP, which may not be the optimal MPP. The SmartSolar 150/100-MC4's innovative algorithm ensures maximum energy yield by dynamically adjusting to the best MPP.Key Features of the SmartSolar 150/100-MC4 (100A, 12V/24V/36V/48V MPPT)Ultra-fast MPP tracker for maximum efficiency, even in cloudy conditionsRated charge current: 100A | Max PV open-circuit voltage: 150VMaximum PV power: 12V system: 1450W 24V system: 2900W 48V system: 5800WVictron Energy Part Number (MPN): SCC115110511Automatic MPP voltage detection in partial shading, increasing efficiency compared to standard MPPT controllersOptional LCD display availableBuilt-in Bluetooth module for app-based analysis and configuration via the free Victron appVE.Direct communication port for connecting to GX Color Control Panel or a Smart BMV Battery MonitorHigh peak efficiency of 98%Parallel operation possible with multiple 150/100-MC4 controllersAdjustable absorption voltage & float voltageCompatible with AGM, GEL, lead-acid, calcium-calcium, and lithium batteriesFully programmable charging algorithms (manually adjustable via a switch on the housing)Integrated battery reverse polarity protectionMulti-stage adaptive charging algorithmRemote on/off switching via 2-pin connectorIP43 protection for electronic components | IP22 protection for connection areaIntegrated temperature sensor adjusts float and absorption voltage based on temperatureDay/night timer & light dimming option High-Speed MPPT Tracker – Next Generation EfficiencyEspecially in cloudy conditions, where light intensity fluctuates, an ultra-fast MPPT controller can increase energy yield by up to 30% compared to PWM charge controllers and 10% compared to slower MPPT controllers.Comprehensive Electronic Protection Features✅ Battery reverse polarity protection ✅ PV reverse current blocking ✅ Overheating protection ✅ Short circuit protection ✅ PV input reverse polarity protectionVE.Direct Data Communication PortThe VE.Direct port transmits all key parameters in real time to connected devices such as the GX Color Control system panel. This provides seamless system integration at a lower cost compared to full Canbus integration (VE-Direct).Included in Delivery📦 1x Victron SCC115110511 SmartSolar MPPT 150/100-MC4 12V 24V 36V 48V 100A Solar

The SmartSolar Control Display is a plug-in LCD display for the following SmartSolar charge controllers. - SmartSolar MPPT 150/45 up to 250/100 - SmartSolar MPPT 150/70 up to 250/100 VE.Can - BlueSolar MPPT 150/70 up to 250/100 VE.Can Simply remove the rubber seal that protects the plug on the front of the controller and plug in the display.

Victron SmartSolar 100/30 MPPT solar charge controller 12V/24V battery The Victron SmartSolar 100/30 MPPT solar charge controller 12V/24V battery is suitable for solar modules with a total output of up to 440 W (at 12V) or 880 W (at 24V). The charge controller can be conveniently configured and monitored via Bluetooth using an app. The ultra-fast "Maximum Power Point Tracking" (MPPT) significantly improves the yield from the solar cells, especially in overcast conditions. The built-in "BatteryLife" algorithm ensures optimum battery charging, even if the battery cannot be fully charged in one charging process (e.g. because the solar cell is no longer providing charging power due to shading or darkness). Technical data: Voltage: Can be used for 12 volt and 24 volt vehicle electrical systems Nominal charging current: 30 amps Max. PV open circuit voltage: 100 volts Ultra-fast maximum power point tracking (MPPT) Bluetooth Smart integrated: enables setup and monitoring with a smartphone or other Bluetooth-enabled device BatteryLife: intelligent battery management through load shedding Automatic battery voltage detection Flexible charging algorithms Overheating protection and load reduction at high temperatures

The SmartSolar 150/35 MPPT from Victron Energy (SCC115035210) belongs to the latest generation of smart solar charge controllers, with integrated Bluetooth for data transfer and configuration via app on a smartphone or tablet. It supports batteries with a voltage of 12V 24V 36V or even 48V and is therefore very versatile. The maximum charging current is 35A and uses the latest charging methods. Depending on the system voltage, the regulator can therefore efficiently charge your batteries with 500W (12V) to 2000W (48V). In addition, this device also enables the compensation of partial shading and one of the most reliable MPPT trackers on the market. The optional MPPT WireBox-M from Victron Energy is the ideal addition to your SmartSolar charge controller. It securely covers the cable inputs and connection terminals of the controller, protecting them from external influences and contact. key product features of the SmartSolar 150/35 35A 12V 24V 36V 48V MPPT ultra-fast MPP tracker of the latest generation ensures the best possible yield even in overcast conditionsautomatic detection of the MPP voltage in the event of partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllersintegrated VE.Direct data communication port for connection for communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panelhigh maximum efficiency of 98%fully programmable charging algorithms that are later activated and switched manually via a switch on the housingNominal charging current 35A, 100V maximum PV open-circuit voltage12V:500W / 24V:1000W / 36V:1500W / 48V:2000Wintegrated protection against battery polarity reversalmulti-stage and adaptive charging algorithmintegrated temperature sensor balances maintenance and constant charging voltage according to temperatureDay/night time control and light dimming option VE-Direct data port for programming, data evaluation in real time and display of the history Modern Apple and Android smartphones and tablets can be connected to the GX Color Control system monitors, the Venus GX or the MPPT Control Panel via VE.Direct, for example. High-speed MPP tracker of the latest generation An extremely fast MPPT controller improves the energy yield by up to 30 % compared to PWM charging controllers and by up to 10 % compared to slower MPPT controllers, especially in overcast conditions when the light intensity is constantly changing. The 150/35 also features a number of other innovative technologies such as the VE.Direct communication port. comprehensive electronic protection Protection against reverse polarity battery connectionPV reverse current blockingProtection against overheating of the deviceProtection against short circuitsProtection against reverse polarity PV connection Scope of delivery1x Victron Energy SCC115035210 SmartSolar MPPT 150/35 12V 24V 36V 48V 35A charge controllerOperating instructions

Der Smartsolar MPPT 150/85-Tr von Victron Energy (MPN SCC115085411), gehört zur neusten Generation smarter Solarregler des niederländischen Premium-Herstellers und verarbeitet satte 85A Solarstrom und kann flexibel mit 12/24/36/48 V Batterien arbeiten. Ultraschnelles Powertracking und automatische Power-Point Erkennung bei Teil-Verschattung sind nur 2 der vielen Highlights dieser neuen Geräteklasse. Den SmartSolar 150/85-tr gibt es auch als Version mit MC4-Anschlüssen auf der Solar-Seite des Ladereglers statt Schraubklemmen. Außerdem beherrscht dieses Model den Parallelbetrieb mit anderen Reglern des gleichen Typs. Im Vergleich zur BlueSolar Serie ist bei der Smartsolar Familie das Bluetooth-Modul bereits fest im Regler integriert was den Smart-Dongle bei diesem Gerät überflüssig macht. Neu ist auch das optional erhältliche LCD Display, welches auf den SmartSolar 150/85-tr einfach bei Bedarf aufgesteckt werden kann. Das Display liefert dann alle wichtigen Informationen rund um den Regler smarte Datenkommunikation über VE.Direct und blitzschnelles Bluetooth Moderne Apple und Android Smartphones, Tablets, Macbooks und andere Geräte können dank des fest-integriertem Bluetooth-Modul und der kostenlosen Victron Connect APP verbunden werden. Die App kann dann zur Konfiguration vieler wichtiger Funktionen des MPPT 150/85-tr SmartSolar Reglers eingesetzt werden. Natürlich liefert Sie auch alle wichtigen Parameter wie den aktuellen Solarertrag in Echtzeit. automatische Erkennung des Maximum Power Point bei Teilverschattung Im Falle einer Teil-Verschattung können auf der Strom-Spannungskurve zwei oder mehr Punkte maximaler Leistung (MPP) vorhanden sein. Herkömmliche MPPTs neigen dazu, sich auf einen lokalen MPP einzustellen. Dieser ist jedoch womöglich nicht der optimale MPP. Der innovative Algorithmus des SmartSolar 150/85-tr wird den Energieertrag immer maximieren, indem er sich auf den optimalen MPP einstellt. wesentliche Produktmerkmale des SmartSolar 150/85-tr 85A 12V 24V 36V 48V MPPT ultraschneller MPP-Tracker der neusten Generation sorgt für bestmöglichen Ertrag auch bei bedecktem Himmel Nennladestrom 85A, 150V maximale PV-Leerlaufspannung maximale PV-Leistung: 12V 1200W / 24V 2400W / 48V 4900W Victron Energy Teilenummer (MPN): SCC115085411 automatische Erkennung der MPP Spannung bei Teilverschattung sorgt für eine weitere Ertragsverbesserung gegenüber "einfacher" MPPT Laderegler mit optionalem LCD Display fest integriertes Bluetooth Modul für App gestützte Analyse und Konfiguration des Reglers (über kostenlose Victron App auf kompatiblen Geräten) optionales LCD-Display verfügbar integrierter VE.Direct Datenkommunikationsport zum Anschluss Zur Kommunikation mit Zusatzgeräten dem GX Color Control Panel oder einem Smart BMV Batteriemonitor hoher Maximalwirkungsgrad von 98% Parallel-Betrieb mit anderen 150/85-tr Reglern möglich regulierbare Konstantladespannung regulierbare Erhaltungsladespannung geeignet für alle AGM, GEL, Blei-Säure Kalzium-Kalzium und Lithium Batterien voll programmierbare Lade-Algorithmen die später manuell über einen Schalter am Gehäuse aktiviert und umgeschalten werden integrierter Schutz vor Batterieverpolung mehrstufiger und adaptiver Lade-Algorithmus ferngesteuertes Ein- und Ausschalten über 2-poligen Stecker möglich Schutzgrad IP 43 für die elektronischen Bauteile und Schutzart IP 22 für den Anschlussbereich des Reglers integrierter Temperatursensor gleicht Erhaltungs- und Konstantladespannung nach Temperatur aus Tag/Nacht-Zeitsteuerung und Lichtdämmungsoption High-Speed MPP-Tracker der neusten Generation Insbesondere bei bedecktem Himmel, wenn die Lichtintensität sich ständig verändert, verbessert ein extrem schneller MPPT- Regler den Energieertrag im Vergleich zu PWM-Lade-Reglern um bis zu 30 % und im Vergleich zu langsameren MPPT-Reglern um bis zu 10 %. umfangreicher elektronischer Schutz Schutz vor verpolten Batterieanschluss PV-Rückstromsperre Schutz vor Überhitzung des Geräts Schutz vor Kurzschlüssen Schutz vor verpolten PV-Anschluss der VE.Direct Datenkommunikationsport VE.Direct im Text- Modus übermittelt im Sekundentakt alle wichtigen Parameter an andere Geräte, die mit dem Laderegler gekoppelt sind und bietet so die Möglichkeit der Kommunikation mit Zusatzgeräten Systempanel GX Color Control. Der VE.Direct-Anschluss ist für Produkte gedacht, bei denen eine vollständige Canbus-Integration (VE-Direct) zu hohe Kosten verursachen würde. Mehr Informationen zu VE.Direct finden Sie in unserem Victron Energy Markenshop. Lieferumfang1x Victron SCC115085411 SmartSolar MPPT 150/85-tr 12V 24V 36V 48V 85A LadereglerBedienungsanleitung

The Smartsolar 100/20-48 from Victron Energy (mpn scc110020160r) is a mppt solar charge controller with 20a max charge current for charging 12v and 24v batteries. Unlike the Bluesolar version, the Smart version has integrated Bluetooth, which eliminates the need to purchase a Bluetooth dongel. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control. The integrated Bluetooth in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices. Optional, the MPPT-WireBox-S 100/20 from Victron Energy is the ideal complement for your SmartSolar charge controller. It securely covers the cable inputs or connection terminals of the controller, protecting them from external influences and contact. The most important technical features at a glance 20a max. charging current, suitable for 12v and 24v batteriesnominal PV power for 12v systems: 290Wnominal PV power for 24v systems: 580Wnominal PV power for 48v systems: 1160W20a load outputhigh peak efficiency of 98freely programmable battery charging algorithm (via the free Victron Connect APP)Light dimming functions programmable (via the free Victron Connect APP)Ultra fast maximum power point trackingmax. PV open circuit voltage: 100VCharging algorithm: multi-stage, adaptiveintegrated Bluetooth module Ultra fast maximum power point tracking Especially in overcast conditions when light intensity is constantly changing, an ultra-fast mppt controller improves power output by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllers. Intelligent load output Deep discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a preset voltage value. Alternatively, an algorithm for intelligent battery management can be selected: see BatteryLife.The load output is short-circuit proof. Battery Life: intelligent battery management If the solar charge controller is not able to charge the battery to its full capacity within a day, the status of the battery will constantly alternate between "partially charged" and "end of discharge". This mode of operation (no regular full charging) will damage a lead-acid battery within a few weeks or months. The Battery-Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold day by day (i.e., disconnects the load earlier) until the energy gained is sufficient to charge the battery to near 100%. From this point, the load disconnection threshold is modulated so that charging to near 100% is achieved about once a week.Scope of delivery: 1x Victron Energy Smartsolar mppt 100/20-48 20a 12v 24v 48v solar charge controller1x instruction manual NoteThe device shows the imprint 48v - on the packaging of the device the data sheet of the 48v version is printed on the side. Contrary to this confusing information on the device itself, this is as described for both 12v and 24v - and now also suitable for 48v battery banks. Until recently these were separate devices - one for 12v/24v and one for 48v - these two have now been combined and the printing on the case and packaging has been taken from the 48v version

The Victron Energy SmartSolar mppt 100/50 50a 12v/24v solar charge controller (mpn scc110050210), is new version of the BlueSolar 100/50. The Smart version differs only in the from the Blue version mainly by the permanently integrated Bluetooth communication module. This allows the SmartSolar charge controller to be fully monitored and analyzed on any app-enabled device. The required Victron Connect app can be installed free of charge. Optional, the MPPT-WireBox-M from Victron Energy is the ideal complement for your SmartSolar charge controller. It securely covers the cable inputs or connection terminals of the controller, protecting them from external influences and contact. key product features of the SmartSolar 100/50 50a 12v 24v mppt latest generation ultra-fast MPP tracker ensures best possible yield even in overcast conditionsintegrated VE.Direct data communication porthigh maximum efficiency of 98for 12v, 24v systemsintegrated Bluetooth module50a maximum charge currentfully programmable charging algorithms that can later be manually activated and used via a switch on the case100v maximum pv open circuit voltage700W maximum pv power for 12v, 1400w for 24v systemsintegrated protection against battery polarity reversalmulti-stage and adaptive charging algorithmDay/night time control and light dimming option more protection compared to the smaller models in the SmartSolar mppt seriesCompared to the 75/10, 75/15 and 100/15 model, the SmartSolar 100/30 mppt has overheating protection with shutdown function and automatic restart after reaching normal operating temperatureVE.Direct data communication port VE.Direct in text mode transmits all important parameters to other devices linked to the charge controller every second, providing the possibility of communication with additional devices gx Color Control Panel from Victron. The VE.Direct connection is intended for products where a full Canbus integration (VE-Direct) would cause too high costs High-speed MPP tracker of the latest generation Especially in overcast conditions when light intensity is constantly changing, an extremely fast mppt controller improves energy output by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllers. In addition, the 100/50 features several other innovative technologies such as the VE.Direct communication port. Options for programming, real-time data and viewing historyModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected, for example, via the integrated Bluetooth Smart Dongles and the mppt app or the gx Color Control. Please note that Bluetooth Smart Dongles and gx Color Control are separate items which are not included in the delivery of the charge controller but can be purchased optionally.Flexible charging algorithmsFully programmable charging algorithm (please refer to the software page on our website) as well as eight pre-programmed algorithms that can be selected via a rotary knob (please refer to our manual for more details)Scope of delivery: 1x Victron Energy scc110050210 SmartSolar mppt 100/50 50a 12v/24v solar charge controller1x user manual

The MPPT RS SmartSolar from Victron Energy (MPN SCC145110410) is a 48V solar charge controller with a PV input voltage of up to 450 VDC and an output current of 100A. It is used in grid-tied and off-grid solar applications where maximum battery charging power is required. Features With ultra-fast Maximum Power Point Tracking (MPPT) Multiple independent MPPT tracking inputs Isolated PV connections for added safety Wide MPPT voltage range Lightweight, efficient and quiet Integrated display and Bluetooth communication PV insulation resistance monitoring for safety at higher voltages VE.Can and VE.Direct connection I/O connections Configure and monitor with VictronConnect app or in the VRM portal The integrated Bluetooth Smart connection enables quick monitoring or configuration of settings via app. The integrated 30-day history shows the individual performance of each MPPT tracker. The app enables the display of e.g. battery voltage and current, PV voltage and current, historical data and trends. The VictronConnect app is available for Android, iOS, Windows and macOS X.When the solar controller is connected to a GX device and the internet, the Victron Remote Management Portal (VRM) provides access to the full power of your SmartSolar RS charge controllers. Additional units connected in series The SmartSolar RS charge controller is equipped with VE.Can bus connections. This enables communication with additional SmartSolar RS & VE.Can MPPT units. The additional units are simply "daisy chained" together with an RJ45 cable. When connected, all individual charge controllers synchronize their charge levels. You can also send your data to a GX device (such as the CerboGX) for monitoring via the same cable. Technical data Battery voltage: 48V Nominal charging current: 100A Max. Charging power: 5.8kW at 57.6V Charging algorithm: multi-stage adaptive (customizable) Max. DC-PV voltage: 450V MPPT operating voltage range: 80-450V Number of trackers: 2 Max. PV operating input current: 18A per tracker Protection class: IP21 Dimensions: 440 x 313 x 126 mm Weight: 7.9 kg Scope of delivery: 1x Victron SmartSolar MPPT RS 450/100 48V charge controller

The Victron Energy SmartSolar mppt 100/30 30a 12v/24v solar charge controller (mpn scc110030210), is new version of the BlueSolar 100/30. The Smart version differs only in the from the Blue version mainly by the permanently integrated Bluetooth communication module. This allows the SmartSolar charge controller to be fully monitored and analyzed on any app-enabled device. The required Victron Connect app can be installed free of charge. Optional, the MPPT-WireBox-M from Victron Energy is the ideal complement for your SmartSolar charge controller. It securely covers the cable inputs or connection terminals of the controller, protecting them from external influences and contact. key product features of the SmartSolar 100/30 30a 12v 24v mppt latest generation ultra-fast MPP tracker ensures best possible yield even in overcast conditionsintegrated VE.Direct data communication porthigh maximum efficiency of 98for 12v and 24v systemsintegrated Bluetooth module30a maximum charge currentfully programmable charging algorithms that can later be manually activated and used via a switch on the case100V maximum pv open circuit voltage440W maximum pv power for 12v, 880w for 24v systemsintegrated protection against battery polarity reversalmulti-stage and adaptive charging algorithmDay/night time control and light dimming option more protection compared to the smaller models in the SmartSolar mppt seriesCompared to the 75/10, 75/15 and 100/15 model, the SmartSolar 100/30 mppt has overheating protection with shutdown function and automatic restart after reaching normal operating temperatureVE.Direct data communication port VE.Direct in text mode transmits all important parameters to other devices linked to the charge controller every second, providing the possibility of communication with additional devices gx Color Control Panel from Victron. The VE.Direct connection is intended for products where a full Canbus integration (VE-Direct) would cause too high costs High-speed MPP tracker of the latest generation Especially in overcast conditions when light intensity is constantly changing, an extremely fast mppt controller improves energy output by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllers. In addition, the 100/30 features several other innovative technologies such as the VE.Direct communication port. Options for programming, real-time data and viewing historyModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected, for example, via the integrated Bluetooth Smart Dongles and the mppt app or the gx Color Control. Please note that Bluetooth Smart Dongles and gx Color Control are separate items which are not included in the delivery of the charge controller but can be purchased optionally.Flexible charging algorithmsFully programmable charging algorithm (please refer to the software page on our website) as well as eight pre-programmed algorithms that can be selected via a rotary knob (please refer to our manual for more details)Scope of delivery: 1x Victron Energy scc110030210 SmartSolar mppt 100/30 30a 12v/24v solar charge controller1x user manual

The Smartsolar 100/15 from Victron Energy (mpn scc110015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the Bluesolar 100/15, the Smart version has integrated Bluetooth, which eliminates the need to purchase a Bluetooth dongel. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control.The integrated Bluetooth in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices. Optional, the MPPT-WireBox-S 100/15 from Victron Energy is the ideal complement for your SmartSolar charge controller. It securely covers the cable inputs or connection terminals of the controller, protecting them from external influences and contact.The most important technical features at a glance 15a max charge current, suitable for 12v and 24v batteriesnominal PV power for 12v systems: 220wnominal PV power for 24v systems: 440w15a load outputhigh peak efficiency of 98freely programmable battery charging algorithm (via free Victron Connect app)Light dimming functions programmable (via free Victron Connect app)Ultra fast maximum power point trackingmax. PV open circuit voltage: 100vCharging algorithm: multi-level, adaptiveintegrated Bluetooth modu Ultrafast Maximum Power Point TrackingEspecially in overcast conditions when light intensity is constantly changing, an ultra-fast mppt controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllersintelligent load outputDeep discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a preset voltage value. Alternatively, an algorithm for intelligent battery management can be selected: see BatteryLife.The load output is short circuit protectedBattery Life: intelligent battery managementIf the solar charge controller is not able to charge the battery to its full capacity within one day, the battery status will constantly alternate between "partially charged" and "end of discharge". This mode of operation (no regular full charge) will damage a lead-acid battery within a few weeks or monthsThe Battery-Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold day by day (i.e., disconnects the load earlier) until the energy gained is sufficient to charge the battery to near 100%. From this point, the load disconnection threshold is modulated so that charging to near 100% is achieved approximately once a weekScope of delivery:1x Victron Energy SCC110015060R Smartsolar mppt 100/15 15a 12v 24v solar charge controller1x instruction manual

The SmartSolar 150/35 MPPT from Victron Energy (SCC115035210) belongs to the latest generation of smart solar charge controllers, with integrated Bluetooth for data transfer and configuration via app on a smartphone or tablet. It supports batteries with a voltage of 12V 24V 36V or even 48V and is therefore very versatile. The maximum charging current is 35A and uses the latest charging methods. Depending on the system voltage, the regulator can therefore efficiently charge your batteries with 500W (12V) to 2000W (48V). In addition, this device also enables the compensation of partial shading and one of the most reliable MPPT trackers on the market. The optional MPPT WireBox-M from Victron Energy is the ideal addition to your SmartSolar charge controller. It securely covers the cable inputs and connection terminals of the controller, protecting them from external influences and contact. key product features of the SmartSolar 150/35 35A 12V 24V 36V 48V MPPT ultra-fast MPP tracker of the latest generation ensures the best possible yield even in overcast conditionsautomatic detection of the MPP voltage in the event of partial shading ensures a further improvement in yield compared to "simple" MPPT charge controllersintegrated VE.Direct data communication port for connection for communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control Panelhigh maximum efficiency of 98%fully programmable charging algorithms that are later activated and switched manually via a switch on the housingNominal charging current 35A, 100V maximum PV open-circuit voltage12V:500W / 24V:1000W / 36V:1500W / 48V:2000Wintegrated protection against battery polarity reversalmulti-stage and adaptive charging algorithmintegrated temperature sensor balances maintenance and constant charging voltage according to temperatureDay/night time control and light dimming option VE-Direct data port for programming, data evaluation in real time and display of the history Modern Apple and Android smartphones and tablets can be connected to the GX Color Control system monitors, the Venus GX or the MPPT Control Panel via VE.Direct, for example. High-speed MPP tracker of the latest generation An extremely fast MPPT controller improves the energy yield by up to 30 % compared to PWM charging controllers and by up to 10 % compared to slower MPPT controllers, especially in overcast conditions when the light intensity is constantly changing. The 150/35 also features a number of other innovative technologies such as the VE.Direct communication port. comprehensive electronic protection Protection against reverse polarity battery connectionPV reverse current blockingProtection against overheating of the deviceProtection against short circuitsProtection against reverse polarity PV connection Scope of delivery1x Victron Energy SCC115035210 SmartSolar MPPT 150/35 12V 24V 36V 48V 35A charge controllerOperating instructions

Der Smartsolar MPPT 150/45 von Victron Energy (MPN SCC115045212), gehört zur neusten Generation smarter Solarregler des niederländischen Premium-Herstellers und verarbeitet satte 45A Solarstrom und kann flexibel mit 12/24/36/48 V Batterien arbeiten. Ultraschnelles Powertracking und automatische Power-Point Erkennung bei Teil-Verschattung sind nur 2 der vielen Highlights dieser neuen Geräteklasse. Den SmartSolar 150/45 gibt es auch als Version mit MC4-Anschlüssen auf der Solar-Seite des Ladereglers statt Schraubklemmen. Außerdem beherrscht dieses Model den Parallelbetrieb mit anderen Reglern des gleichen Typs. Im Vergleich zur BlueSolar Serie ist bei der Smartsolar Familie das Bluetooth-Modul bereits fest im Regler integriert was den Smart-Dongle bei diesem Gerät überflüssig macht. Optional ist die MPPT WireBox-L Tr von Victron Energy die ideale Ergänzung für Ihren SmartSolar Laderegler. Mit ihm werden die Kabeleingänge, bzw. die Anschlussklemmen des Reglers sicher abgedeckt und so von äußeren Einflüssen und Berührung geschützt. Wesentliche Produktmerkmale des SmartSolar 150/45 45A 12V 24V 36V 48V MPPT ultraschneller MPP-Tracker der neusten Generation sorgt für bestmöglichen Ertrag auch bei bedecktem HimmelNennladestrom 45A, 150V maximale PV-Leerlaufspannungmaximale PV-Leistung: 12 V 650 W / 24 V 1300 W / 48 V 2600 WVictron Energy Teilenummer (MPN): SCC115045212automatische Erkennung der MPP Spannung bei Teilverschattung sorgt für eine weitere Ertragsverbesserung gegenüber "einfacher" MPPT Ladereglerfest integriertes Bluetooth Modul für App gestützte Analyse und Konfiguration des Reglers (über kostenlose Victron App auf kompatiblen Geräten)integrierter VE.Direct Datenkommunikationsport zum Anschluss Zur Kommunikation mit Zusatzgeräten dem GX Color Control Panel oder einem Smart BMV Batteriemonitorhoher Maximalwirkungsgrad von 98%Parallel-Betrieb mit anderen 150/45 Reglern möglichregulierbare Konstantladespannungregulierbare Erhaltungsladespannunggeeignet für alle AGM, GEL, Blei-Säure Kalzium-Kalzium und Lithium Batterienvoll programmierbare Lade-Algorithmen die später manuell über einen Schalter am Gehäuse aktiviert und umgeschalten werdenintegrierter Schutz vor Batterieverpolungmehrstufiger und adaptiver Lade-Algorithmusferngesteuertes Ein- und Ausschalten über 2-poligen Stecker möglichSchutzgrad IP 43 für die elektronischen Bauteile und Schutzart IP 22 für den Anschlussbereich des Reglersintegrierter Temperatursensor gleicht Erhaltungs- und Konstantladespannung nach Temperatur ausTag/Nacht-Zeitsteuerung und Lichtdämmungsoption Smarte Datenkommunikation über VE.Direct und blitzschnelles Bluetooth Moderne Apple und Android Smartphones, Tablets, Macbooks und andere Geräte können dank des fest-integriertem Bluetooth-Modul und der kostenlosen Victron Connect APP verbunden werden. Die App kann dann zur Konfiguration vieler wichtiger Funktionen des MPPT 150/45 SmartSolar Reglers eingesetzt werden. Natürlich liefert Sie auch alle wichtigen Parameter wie den aktuellen Solarertrag in Echtzeit. Automatische Erkennung des Maximum Power Point bei Teilverschattung Im Falle einer Teil-Verschattung können auf der Strom-Spannungskurve zwei oder mehr Punkte maximaler Leistung (MPP) vorhanden sein. Herkömmliche MPPTs neigen dazu, sich auf einen lokalen MPP einzustellen. Dieser ist jedoch womöglich nicht der optimale MPP. Der innovative Algorithmus des SmartSolar 150/45 wird den Energieertrag immer maximieren, indem er sich auf den optimalen MPP einstellt. High-Speed MPP-Tracker der neusten Generation Insbesondere bei bedecktem Himmel, wenn die Lichtintensität sich ständig verändert, verbessert ein extrem schneller MPPT- Regler den Energieertrag im Vergleich zu PWM-Lade-Reglern um bis zu 30 % und im Vergleich zu langsameren MPPT-Reglern um bis zu 10 %. umfangreicher elektronischer Schutz Schutz vor verpolten BatterieanschlussPV-RückstromsperreSchutz vor Überhitzung des GerätsSchutz vor KurzschlüssenSchutz vor verpolten PV-Anschluss der VE.Direct Datenkommunikationsport VE.Direct im Text- Modus übermittelt im Sekundentakt alle wichtigen Parameter an andere Geräte, die mit dem Laderegler gekoppelt sind und bietet so die Möglichkeit der Kommunikation mit Zusatzgeräten Systempanel GX Color Control. Der VE.Direct-Anschluss ist für Produkte gedacht, bei denen eine vollständige Canbus-Integration (VE-Direct) zu hohe Kosten verursachen würde. Mehr Informationen zu VE.Direct finden Sie in unserem Victron Energy Markenshop. Lieferumfang1x Victron SCC115045212 SmartSolar MPPT 150/45 12V 24V 36V 48V 45A LadereglerBedienungsanleitung

The Smartsolar 100/15 from Victron Energy (mpn scc110015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the Bluesolar 100/15, the Smart version has integrated Bluetooth, which eliminates the need to purchase a Bluetooth dongel. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control.The integrated Bluetooth in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices. Optional, the MPPT-WireBox-S 100/15 from Victron Energy is the ideal complement for your SmartSolar charge controller. It securely covers the cable inputs or connection terminals of the controller, protecting them from external influences and contact.The most important technical features at a glance 15a max charge current, suitable for 12v and 24v batteriesnominal PV power for 12v systems: 220wnominal PV power for 24v systems: 440w15a load outputhigh peak efficiency of 98freely programmable battery charging algorithm (via free Victron Connect app)Light dimming functions programmable (via free Victron Connect app)Ultra fast maximum power point trackingmax. PV open circuit voltage: 100vCharging algorithm: multi-level, adaptiveintegrated Bluetooth modu Ultrafast Maximum Power Point TrackingEspecially in overcast conditions when light intensity is constantly changing, an ultra-fast mppt controller improves energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower mppt controllersintelligent load outputDeep discharge of the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a preset voltage value. Alternatively, an algorithm for intelligent battery management can be selected: see BatteryLife.The load output is short circuit protectedBattery Life: intelligent battery managementIf the solar charge controller is not able to charge the battery to its full capacity within one day, the battery status will constantly alternate between "partially charged" and "end of discharge". This mode of operation (no regular full charge) will damage a lead-acid battery within a few weeks or monthsThe Battery-Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold day by day (i.e., disconnects the load earlier) until the energy gained is sufficient to charge the battery to near 100%. From this point, the load disconnection threshold is modulated so that charging to near 100% is achieved approximately once a weekScope of delivery:1x Victron Energy SCC110015060R Smartsolar mppt 100/15 15a 12v 24v solar charge controller1x instruction manual

Victron SmartSolar 75/15 MPPT solar charge controller 12V/24V battery The Victron SmartSolar 75/15 MPPT solar charge controller 12V/24V battery is suitable for solar modules up to 220W (at 12V) or 440W (at 24V) total power. The charge controller can be conveniently configured and monitored via Bluetooth with an app. The ultra-fast "Maximum Power Point Tracking" (MPPT) significantly improves the yield from the solar cells, especially in overcast conditions. The built-in "BatteryLife" algorithm ensures optimum battery charging, even if the battery cannot be fully charged in one charging process (e.g. because the solar cell is no longer providing charging power due to shading or darkness). Technical data: Voltage: Can be used for 12 volt and 24 volt vehicle electrical systems Nominal charging current: 15 amps Max. PV open circuit voltage: 75 volts Ultra-fast maximum power point tracking (MPPT) Bluetooth Smart integrated: enables setup and monitoring with a smartphone or other Bluetooth-enabled device BatteryLife: intelligent battery management through load shedding Automatic battery voltage detection Flexible charging algorithms Overheating protection and load reduction at high temperatures

Victron SmartSolar 75/15 MPPT solar charge controller 12V/24V battery The Victron SmartSolar 75/15 MPPT solar charge controller 12V/24V battery is suitable for solar modules up to 220W (at 12V) or 440W (at 24V) total power. The charge controller can be conveniently configured and monitored via Bluetooth with an app. The ultra-fast "Maximum Power Point Tracking" (MPPT) significantly improves the yield from the solar cells, especially in overcast conditions. The built-in "BatteryLife" algorithm ensures optimum battery charging, even if the battery cannot be fully charged in one charging process (e.g. because the solar cell is no longer providing charging power due to shading or darkness). Technical data: Voltage: Can be used for 12 volt and 24 volt vehicle electrical systems Nominal charging current: 15 amps Max. PV open circuit voltage: 75 volts Ultra-fast maximum power point tracking (MPPT) Bluetooth Smart integrated: enables setup and monitoring with a smartphone or other Bluetooth-enabled device BatteryLife: intelligent battery management through load shedding Automatic battery voltage detection Flexible charging algorithms Overheating protection and load reduction at high temperatures