The compact, powerful plus distributor with 6 individual circuits enables the professional distribution and protection of small and medium-sized consumers on the battery plus side. Two large collective terminals (cable cross-sections up to 16 mm², current carrying capacity max. 50 A) are used to supply power from the battery and can also be used for further positive feed-through distribution. The fuse holders on the consumer side are designed for commercially available FKS fuses with a rating of 1 A to 20 A; the scope of delivery includes types 15 A, 10 A and 4 x 7.5 A. The associated six distribution terminals allow cable cross-sections of up to 4 mm² with a maximum current carrying capacity of 20 A. Labeling fields on the housing make it easy to assign the fuses to their circuits. Suitable for 12 V and 24 V operation. Connection 1Screw terminals: 2 large connection terminals plus side Cable cross-sections 6 mm2 10mm2 16mm2 Current carrying capacity: max. 36 A Total current max. 50 A Total current max. 50 A Total currentConnection 26 small connection terminals on the consumer side, cable cross-sections: 0.75mm2 1.5mm2 2.5mm2 4mm2 Current load capacities: max. 6 A max. 10 A max. 15 A max. 20 A

The BusBar 6 cip100400070 is a high current busbar for a maximum of 6 mega fuses and 1500a current of Victron Energy offers a professional possibility to bundle several devices protected with mega fuses. So instead of 6 single cables you only have to connect one busbar cable coming from the busbar to the dc power source(s). The Busbar 6 is optimally designed for joint use with the modular Mega-Fuse fuse holder. This can be easily and safely connected to any number of other modular Mega-Fuse holders as required. You can then connect the connected holders to a common dc power source via the high-current busbar (see article image.) Currents up to a maximum of 1500a can be handled safely and professionally with this system. essential article features of the Busbar 6 cip100400070: compatible with all mega fusescompatible with the modular mega fuse holderSpace for maximum 6 fusessecure screw connection to the busbar for maximum safetymaximum 1500a current2 m10 connectors for the dc power source(s)saves you from connecting too many dc cables to the battery where space is rarely enough suitable accessories Megafuse fuses 32v 60a - 300aMegafuse fuses 58v 125 - 500amodularer Sicherungshalter für Megasicherung Scope of delivery: 1x Victron cip100400070 Busbar 6 high current busbar incl. the required screws

Small but powerful: the Victron busbars 150A-600A, 4P-8P + cover. Busbars, also known as busbars, are metallic conductor tracks for electrical power distribution. They are used for the distribution of high current and also serve as connections for batteries or DC devices. A fine network of busbars and contact fingers also enables the efficient connection of solar cells. The busbar at a glance Optimization of the power flowLow electrical resistanceHigher conductivity Features and variants We offer a range of busbars with different rated currents and different connection terminals. Each busbar is equipped with a removable protective cover. There are fixing holes at each end of the black ABS base. In addition, the busbar is suitable for voltages of up to 70 volts. Available models: Busbar + cover 150A 6PBusbar + cover 250A 4PBusbar + cover 250A 6PBusbar + cover 600A 4PBusbar + cover 600A 8P Compatible battery switch: Victron battery switch 275A 48V Scope of delivery: 1x Victron busbars + cover 600A 8P

Small but powerful: the Victron busbars 150A-500A, 4P-8P + cover. Busbars, also known as busbars, are metallic conductor tracks for electrical power distribution. They are used for the distribution of high current and also serve as connections for batteries or DC devices. A fine network of busbars and contact fingers also enables the efficient connection of solar cells.The busbar at a glanceOptimization of the power flowLow electrical resistanceHigher conductivityFeatures and variantsWe offer a range of busbars with different rated currents and different connection terminals. Each busbar is equipped with a removable protective cover. There are fixing holes at each end of the black ABS base. In addition, the busbar is suitable for voltages of up to 70 volts.Available models:Busbar + cover 150A 4PBusbar + cover 150A 6PBusbar + cover 250A 2PBusbar + cover 250A 4PBusbar + cover 250A 6PBusbar + cover 600A 4PBusbar + cover 600A 8PCompatible battery switch:Victron battery switch 275A 48VScope of delivery:1x Victron Busbar 250A 2P with 12 screws & cover - Busbar VBB125021220

Busbars are used for high current distribution and at the same time serve as connections for batteries or DC devices. We offer a range of busbars with different rated currents and a different connection terminal. Each busbar is equipped with a removable protective cover. Available models: Busbar + cover 150a 6PBusbar + cover 250a 4PBusbar + cover 600a 4PBusbar + cover 600a 8PBusbar battery switch 275a 48V

The BusBar 5 CIP100400060 is a high-current busbar for a maximum of 5 mega fuses and 500A current from Victron Energy offers a professional option for bundling several devices fused with mega fuses. Instead of 5 individual cables, you only need to connect one busbar cable from the busbar to the DC power source(s). The Busbar 5 is optimally designed for joint use with the modular Mega-Fuse fuse holder. This can be easily and securely plugged together with any number of other modular Mega fuse holders as required. You can then connect the connected holders to a common DC power source via the high-current busbar (see article image.) Currents up to a maximum of 500A can be handled safely and professionally with this system. Key features of the Busbar 5 CIP100400060:compatible with all mega fusesCompatible with the modular mega fuse holderSpace for a maximum of 5 Mega type fusesSecure screw connection to the busbar for maximum safetymaximum 500A current1 M10 connection for the DC power sourcesaves you having to connect too many DC cables to the battery, where there is rarely enough space Suitable accessoriesMegafuse fuses 32V 60A - 300AMegafuse fuses 58V 125 - 500AModular fuse holder for Megafuse fuses Scope of delivery:1x Victron CIP100400060 Busbar 5 high current busbar incl. the required screws

The Victron Lynx Distributor (MPN LYN060102000) is a modular DC busbar with devices for four DC fuses. It monitors the status of each fuse and indicates their respective states via an LED on the front. The Lynx Distributor contains a positive and a negative busbar and provides a connection for 4 individual DC device circuits, loads or DC groups. It provides space for individual DC fuses per DC group. Features of the Victron Lynx Distributor Connection for four individual DC device circuits, loads or groups Positive and negative busbar MEGA fuses Simple installation Part of the modular Lynx distribution system Fuse indicator LEDs If you want to use the fuse indicator LEDs on the Lynx Distributor, a connection to a Lynx Shunt is also required. The Lynx Shunt contains the required wide input power supply (8V - 70V DC) to output the required 5V (4.5V - 5.5V) power requirement of the Lynx Distributor PCB. The RJ11 cable required for the connection is included in the scope of delivery. The Lynx Shunt has two ports, both of which can be used.When fully functional, only the central LED lights up green. If a fuse is blown (or missing), the central and fuse circuit LEDs light up red. If you are not using all connection points in your DC distribution, dummy fuses may need to be fitted to extinguish the red LEDs. Fuses The Lynx Distributor uses MEGA fuses. Please note that some MEGA fuses are designed for 36V only (suitable for 24V systems). For 48V systems, fuses with a rated voltage of 58/64V must be used. Scope of delivery: 1x Victron Lynx Distributor1x RJ11 cable

The Victron Lynx Distributor (MPN LYN060102000) is a modular DC busbar with devices for four DC fuses. It monitors the status of each fuse and indicates their respective states via an LED on the front. The Lynx Distributor contains a positive and a negative busbar and provides a connection for 4 individual DC device circuits, loads or DC groups. It provides space for individual DC fuses per DC group. Features of the Victron Lynx Distributor Connection for four individual DC device circuits, loads or groups Positive and negative busbar MEGA fuses Simple installation Part of the modular Lynx distribution system Fuse indicator LEDs If you want to use the fuse indicator LEDs on the Lynx Distributor, a connection to a Lynx Shunt is also required. The Lynx Shunt contains the required wide input power supply (8V - 70V DC) to output the required 5V (4.5V - 5.5V) power requirement of the Lynx Distributor PCB. The RJ11 cable required for the connection is included in the scope of delivery. The Lynx Shunt has two ports, both of which can be used.When fully functional, only the central LED lights up green. If a fuse is blown (or missing), the central and fuse circuit LEDs light up red. If you are not using all connection points in your DC distribution, dummy fuses may need to be fitted to extinguish the red LEDs. Fuses The Lynx Distributor uses MEGA fuses. Please note that some MEGA fuses are designed for 36V only (suitable for 24V systems). For 48V systems, fuses with a rated voltage of 58/64V must be used. Scope of delivery: 1x Victron Lynx Distributor1x RJ11 cable

Small but powerful: the Victron busbars 150A-600A, 4P-8P + cover. Busbars, also known as busbars, are metallic conductor tracks for electrical power distribution. They are used for the distribution of high current and also serve as connections for batteries or DC devices. A fine network of busbars and contact fingers also enables the efficient connection of solar cells. The busbar at a glance Optimization of the power flowLow electrical resistanceHigher conductivity Features and variants We offer a range of busbars with different rated currents and different connection terminals. Each busbar is equipped with a removable protective cover. There are fixing holes at each end of the black ABS base. In addition, the busbar is suitable for voltages of up to 70 volts. Available models: Busbar + cover 150A 6PBusbar + cover 250A 4PBusbar + cover 250A 6PBusbar + cover 600A 4PBusbar + cover 600A 8P Compatible battery switch: Victron battery switch 275A 48V Scope of delivery: 1x Victron busbars + cover 600A 4P

The Victron Energy busbar (MPN: VBB115021020) is an essential component for the distribution of high current and also serves as a connection option for batteries and DC devices. It has a rated current of 150A and has 2 high-current connections. The protective cover included in the scope of delivery is removable and ensures additional safety. Features of the 150A busbar Optimization of the power flowLow electrical resistanceHigh conductivityMetallic conductor tracksElectrical power distribution Materials Base material: ABS, black, UL 94 V-0Terminal material: Stainless steelBusbar strip material: Tin-plated copper (2.4 x 19 mm)Hexagon nut material: Tin-plated copperCover material: Polycarbonate, clear, UL 94 HB Other available models 150 A / 70 V - 4 high-current connections150 A / 70 V - 6 high-current connections250 A / 70 V - 4 high-current connections250 A / 70 V - 6 high-current connections600 A / 70 V - 4 high-current connections and 8 low-current connections600 A / 70 V - 8 high-current connections and 8 low-current connections Technical data Max. Current: 150 AMax. Voltage: 70 VDCTerminal diameter: 6.35 mmTerminal height: 17 mmRecommended torque: 7 N-mTerminal screws: 8-32 / 4.2 mmWeight: 0.3 kgDimensions 10 screws (with cover) 45 x 152.4 x 32 mm Scope of delivery: Victron Busbar 150A 2P with 10 screws + cover

Small but powerful: the Victron busbars 150A-500A, 4P-8P + cover. Busbars, also known as busbars, are metallic conductor tracks for electrical power distribution. They are used for the distribution of high current and also serve as connections for batteries or DC devices. A fine network of busbars and contact fingers also enables the efficient connection of solar cells.The busbar at a glanceOptimization of the power flowLow electrical resistanceHigher conductivityFeatures and variantsWe offer a range of busbars with different rated currents and different connection terminals. Each busbar is equipped with a removable protective cover. There are fixing holes at each end of the black ABS base. In addition, the busbar is suitable for voltages of up to 70 volts.Available models:Busbar + cover 150A 4PBusbar + cover 150A 6PBusbar + cover 250A 2PBusbar + cover 250A 4PBusbar + cover 250A 6PBusbar + cover 600A 4PBusbar + cover 600A 8PCompatible battery switch:Victron battery switch 275A 48VScope of delivery:1x busbar + cover 150A 4P

Dieser 6-fach Hochlastsicherungshalter von Victron (MPN: CIP050060000) ist ein voll isolierter Sicherungshalter für bis zu 6 MEGA Sicherungen, zur Absicherung großer Verbraucher bzw. Hochlast-Stromkreise. Die Lieferung erfolgt ohne Sicherungen. Maße: 190 x 100 mm Lieferumfang: 1x Victron Sicherungshalter mit Busbar 250A 6-fach CIP050060000

The Victron Lynx Power In module (MPN LYN020102000) is used to connect batteries via an external fuse. This can be useful if you have multiple parallel strings. Due to the extremely high short circuit current potential of most battery banks, it is recommended to use an external fuse system with a suitable fault current interruption rating (e.g. an NH HRC). Features of the Victron Lynx Power In1000ANegative and positive DC busbarSimple installationPart of the modular Lynx distribution systemStructureThe Power In module contains a negative and a positive DC busbar with M8 screws for connecting the battery cables. Cables with a diameter of up to 22 mm can be routed through the lower entries and via the two side connections. Scope of delivery: 1x Victron Lynx Power In

The Lynx Shunt VE.Can from Victron (MPN LYN040102100) is an intelligent 1000A shunt (shunt resistor) with a device for a fuse. With the built-in battery monitor, the state of charge of the battery can be accurately monitored. Use a GX device (e.g. Cerbo GX) to read out the information. Part of the modular Lynx distribution system.Features of the Victron Lynx Shunt VE.Can 1000A CNN 325A / 80V fuse integrated battery monitor simple installation Part of the modular Lynx distribution system StructureThe Lynx shunt contains a positive busbar with space for a CNN fuse and a negative busbar with the shunt. It also contains battery monitoring electronics. The Lynx shunt can send monitoring information via the VE.CAN bus battery to a CCGX or VGX or to a third party CANbus monitoring system such as an NMEA2000. The CCGX, VGX or third party display acts as a battery monitor display and is also used to set up the built-in battery monitor. The Lynx shunt is available with a VE.Can connection.Scope of delivery:1x Victron Lynx Shunt VE.Can

AUPROTEC Mega high-current fuse according to ISO 8820-5 / M8 current rating 80A - 500A, rated voltage 32 V/DC Quality fuses made in Germany - with plastic insulating body to prevent sparking when the fuse is triggered No deformation and high contact reliability thanks to reinforced material on the drill holes Automotive high-current screw-in fuse for cars, trucks, construction vehicles, agricultural machinery, buses + motorhomes Cable cross-section Fuse 4 mm² 30 A 6 mm² 40 A 10 mm² 80 A 16 mm² 100 A 25 mm² 150 A 35 mm² 200 A 50 mm² from 250 A up to 300 A