Small but powerful: the Victron busbars 150A-500A, 4P-8P + cover. Busbars, also known as busbars, are metallic conductor tracks for electrical power distribution. They are used for the distribution of high current and also serve as connections for batteries or DC devices. A fine network of busbars and contact fingers also enables the efficient connection of solar cells.The busbar at a glanceOptimization of the power flowLow electrical resistanceHigher conductivityFeatures and variantsWe offer a range of busbars with different rated currents and different connection terminals. Each busbar is equipped with a removable protective cover. There are fixing holes at each end of the black ABS base. In addition, the busbar is suitable for voltages of up to 70 volts.Available models:Busbar + cover 150A 4PBusbar + cover 150A 6PBusbar + cover 250A 2PBusbar + cover 250A 4PBusbar + cover 250A 6PBusbar + cover 600A 4PBusbar + cover 600A 8PCompatible battery switch:Victron battery switch 275A 48VScope of delivery:1x Victron Busbar 250A 2P with 12 screws & cover - Busbar VBB125021220

The Victron Lynx Distributor (MPN LYN060102000) is a modular DC busbar with devices for four DC fuses. It monitors the status of each fuse and indicates their respective states via an LED on the front. The Lynx Distributor contains a positive and a negative busbar and provides a connection for 4 individual DC device circuits, loads or DC groups. It provides space for individual DC fuses per DC group. Features of the Victron Lynx Distributor Connection for four individual DC device circuits, loads or groups Positive and negative busbar MEGA fuses Simple installation Part of the modular Lynx distribution system Fuse indicator LEDs If you want to use the fuse indicator LEDs on the Lynx Distributor, a connection to a Lynx Shunt is also required. The Lynx Shunt contains the required wide input power supply (8V - 70V DC) to output the required 5V (4.5V - 5.5V) power requirement of the Lynx Distributor PCB. The RJ11 cable required for the connection is included in the scope of delivery. The Lynx Shunt has two ports, both of which can be used.When fully functional, only the central LED lights up green. If a fuse is blown (or missing), the central and fuse circuit LEDs light up red. If you are not using all connection points in your DC distribution, dummy fuses may need to be fitted to extinguish the red LEDs. Fuses The Lynx Distributor uses MEGA fuses. Please note that some MEGA fuses are designed for 36V only (suitable for 24V systems). For 48V systems, fuses with a rated voltage of 58/64V must be used. Scope of delivery: 1x Victron Lynx Distributor1x RJ11 cable

The Victron Lynx Distributor (MPN LYN060102000) is a modular DC busbar with devices for four DC fuses. It monitors the status of each fuse and indicates their respective states via an LED on the front. The Lynx Distributor contains a positive and a negative busbar and provides a connection for 4 individual DC device circuits, loads or DC groups. It provides space for individual DC fuses per DC group. Features of the Victron Lynx Distributor Connection for four individual DC device circuits, loads or groups Positive and negative busbar MEGA fuses Simple installation Part of the modular Lynx distribution system Fuse indicator LEDs If you want to use the fuse indicator LEDs on the Lynx Distributor, a connection to a Lynx Shunt is also required. The Lynx Shunt contains the required wide input power supply (8V - 70V DC) to output the required 5V (4.5V - 5.5V) power requirement of the Lynx Distributor PCB. The RJ11 cable required for the connection is included in the scope of delivery. The Lynx Shunt has two ports, both of which can be used.When fully functional, only the central LED lights up green. If a fuse is blown (or missing), the central and fuse circuit LEDs light up red. If you are not using all connection points in your DC distribution, dummy fuses may need to be fitted to extinguish the red LEDs. Fuses The Lynx Distributor uses MEGA fuses. Please note that some MEGA fuses are designed for 36V only (suitable for 24V systems). For 48V systems, fuses with a rated voltage of 58/64V must be used. Scope of delivery: 1x Victron Lynx Distributor1x RJ11 cable

Small but powerful: the Victron busbars 150A-600A, 4P-8P + cover. Busbars, also known as busbars, are metallic conductor tracks for electrical power distribution. They are used for the distribution of high current and also serve as connections for batteries or DC devices. A fine network of busbars and contact fingers also enables the efficient connection of solar cells. The busbar at a glance Optimization of the power flowLow electrical resistanceHigher conductivity Features and variants We offer a range of busbars with different rated currents and different connection terminals. Each busbar is equipped with a removable protective cover. There are fixing holes at each end of the black ABS base. In addition, the busbar is suitable for voltages of up to 70 volts. Available models: Busbar + cover 150A 6PBusbar + cover 250A 4PBusbar + cover 250A 6PBusbar + cover 600A 4PBusbar + cover 600A 8P Compatible battery switch: Victron battery switch 275A 48V Scope of delivery: 1x Victron busbars + cover 600A 4P

The Victron Energy busbar (MPN: VBB115021020) is an essential component for the distribution of high current and also serves as a connection option for batteries and DC devices. It has a rated current of 150A and has 2 high-current connections. The protective cover included in the scope of delivery is removable and ensures additional safety. Features of the 150A busbar Optimization of the power flowLow electrical resistanceHigh conductivityMetallic conductor tracksElectrical power distribution Materials Base material: ABS, black, UL 94 V-0Terminal material: Stainless steelBusbar strip material: Tin-plated copper (2.4 x 19 mm)Hexagon nut material: Tin-plated copperCover material: Polycarbonate, clear, UL 94 HB Other available models 150 A / 70 V - 4 high-current connections150 A / 70 V - 6 high-current connections250 A / 70 V - 4 high-current connections250 A / 70 V - 6 high-current connections600 A / 70 V - 4 high-current connections and 8 low-current connections600 A / 70 V - 8 high-current connections and 8 low-current connections Technical data Max. Current: 150 AMax. Voltage: 70 VDCTerminal diameter: 6.35 mmTerminal height: 17 mmRecommended torque: 7 N-mTerminal screws: 8-32 / 4.2 mmWeight: 0.3 kgDimensions 10 screws (with cover) 45 x 152.4 x 32 mm Scope of delivery: Victron Busbar 150A 2P with 10 screws + cover

Small but powerful: the Victron busbars 150A-600A, 4P-8P + cover. Busbars, also known as busbars, are metallic conductor tracks for electrical power distribution. They are used for the distribution of high current and also serve as connections for batteries or DC devices. A fine network of busbars and contact fingers also enables the efficient connection of solar cells. The busbar at a glance Optimization of the power flowLow electrical resistanceHigher conductivity Features and variants We offer a range of busbars with different rated currents and different connection terminals. Each busbar is equipped with a removable protective cover. There are fixing holes at each end of the black ABS base. In addition, the busbar is suitable for voltages of up to 70 volts. Available models: Busbar + cover 150A 6PBusbar + cover 250A 4PBusbar + cover 250A 6PBusbar + cover 600A 4PBusbar + cover 600A 8P Compatible battery switch: Victron battery switch 275A 48V Scope of delivery: 1x Victron busbars + cover 600A 8P

Small but powerful: the Victron busbars 150A-500A, 4P-8P + cover. Busbars, also known as busbars, are metallic conductor tracks for electrical power distribution. They are used for the distribution of high current and also serve as connections for batteries or DC devices. A fine network of busbars and contact fingers also enables the efficient connection of solar cells.The busbar at a glanceOptimization of the power flowLow electrical resistanceHigher conductivityFeatures and variantsWe offer a range of busbars with different rated currents and different connection terminals. Each busbar is equipped with a removable protective cover. There are fixing holes at each end of the black ABS base. In addition, the busbar is suitable for voltages of up to 70 volts.Available models:Busbar + cover 150A 4PBusbar + cover 150A 6PBusbar + cover 250A 2PBusbar + cover 250A 4PBusbar + cover 250A 6PBusbar + cover 600A 4PBusbar + cover 600A 8PCompatible battery switch:Victron battery switch 275A 48VScope of delivery:1x busbar + cover 150A 4P

Busbars are used for high current distribution and at the same time serve as connections for batteries or DC devices. We offer a range of busbars with different rated currents and a different connection terminal. Each busbar is equipped with a removable protective cover. Available models: Busbar + cover 150a 6PBusbar + cover 250a 4PBusbar + cover 600a 4PBusbar + cover 600a 8PBusbar battery switch 275a 48V

The BusBar 5 CIP100400060 is a high-current busbar for a maximum of 5 mega fuses and 500A current from Victron Energy offers a professional option for bundling several devices fused with mega fuses. Instead of 5 individual cables, you only need to connect one busbar cable from the busbar to the DC power source(s). The Busbar 5 is optimally designed for joint use with the modular Mega-Fuse fuse holder. This can be easily and securely plugged together with any number of other modular Mega fuse holders as required. You can then connect the connected holders to a common DC power source via the high-current busbar (see article image.) Currents up to a maximum of 500A can be handled safely and professionally with this system. Key features of the Busbar 5 CIP100400060:compatible with all mega fusesCompatible with the modular mega fuse holderSpace for a maximum of 5 Mega type fusesSecure screw connection to the busbar for maximum safetymaximum 500A current1 M10 connection for the DC power sourcesaves you having to connect too many DC cables to the battery, where there is rarely enough space Suitable accessoriesMegafuse fuses 32V 60A - 300AMegafuse fuses 58V 125 - 500AModular fuse holder for Megafuse fuses Scope of delivery:1x Victron CIP100400060 Busbar 5 high current busbar incl. the required screws

Dieser 6-fach Hochlastsicherungshalter von Victron (MPN: CIP050060000) ist ein voll isolierter Sicherungshalter für bis zu 6 MEGA Sicherungen, zur Absicherung großer Verbraucher bzw. Hochlast-Stromkreise. Die Lieferung erfolgt ohne Sicherungen. Maße: 190 x 100 mm Lieferumfang: 1x Victron Sicherungshalter mit Busbar 250A 6-fach CIP050060000

The Victron Energy busbar (MPN: VBB115021020) is an essential component for the distribution of high current and also serves as a connection option for batteries and DC devices. It has a rated current of 150A and has 2 high-current connections. The protective cover included in the scope of delivery is removable and ensures additional safety. Features of the 150A busbar Optimization of the power flowLow electrical resistanceHigh conductivityMetallic conductor tracksElectrical power distribution Materials Base material: ABS, black, UL 94 V-0Terminal material: Stainless steelBusbar strip material: Tin-plated copper (2.4 x 19 mm)Hexagon nut material: Tin-plated copperCover material: Polycarbonate, clear, UL 94 HB Other available models 150 A / 70 V - 4 high-current connections150 A / 70 V - 6 high-current connections250 A / 70 V - 4 high-current connections250 A / 70 V - 6 high-current connections600 A / 70 V - 4 high-current connections and 8 low-current connections600 A / 70 V - 8 high-current connections and 8 low-current connections Technical data Max. Current: 150 AMax. Voltage: 70 VDCTerminal diameter: 6.35 mmTerminal height: 17 mmRecommended torque: 7 N-mTerminal screws: 8-32 / 4.2 mmWeight: 0.3 kgDimensions 10 screws (with cover) 45 x 152.4 x 32 mm Scope of delivery: Victron Busbar 150A 2P with 10 screws + cover

The Victron Lynx Power In module (MPN LYN020102000) is used to connect batteries via an external fuse. This can be useful if you have multiple parallel strings. Due to the extremely high short circuit current potential of most battery banks, it is recommended to use an external fuse system with a suitable fault current interruption rating (e.g. an NH HRC). Features of the Victron Lynx Power In1000ANegative and positive DC busbarSimple installationPart of the modular Lynx distribution systemStructureThe Power In module contains a negative and a positive DC busbar with M8 screws for connecting the battery cables. Cables with a diameter of up to 22 mm can be routed through the lower entries and via the two side connections. Scope of delivery: 1x Victron Lynx Power In

The modular MEGA-Fuse fuse holder from Victron Energy (MPN CIP100200100) with cover is used for the safe installation of DC MEGA-Fuse strip fuses together with up to 5 other fuses on a common busbar. This solution is ideal for protecting Multiplus or Quattro inverters connected in parallel or inverters from other manufacturers. The fuse holders can be plugged together so that all fuse holders are firmly anchored in position on the busbar. (see picture)The housing provides solid protection for the fuse against external influences. There are currently two busbar versions that can be used with the modular holder:Victron Busbar 5 CIP100400060 - for 5 holders of type CIP100200100, max 500AVictron Busbar 6 CIP100400070 - for 6 holders of type CIP100200100, max 2000AImportant article features at a glance:500A max. current at max. 32V DC300A max. current at 58V DCfor joint use with the Victron Energy 5 and 6 busbarsfor MEGA-Fuse type fusesMaterial: high-strength plastic compoundAbout the MEGA fuseMEGA-Fuse fuses are strip fuses and are screwed to the holder to ensure optimum contact. The corresponding nuts and snap rings are already pre-assembled on the holder.Mega fuses can be used to protect up to 500A at 32V DC. Up to 300A is possible with the 58V variants.32V MEGA-Fuse fuses - 60A to 500A58V MEGA-Fuse fuses - 125A to 300AScope of delivery:1x Victron CIP100200100 modular MEGA-FUSE fuse holder