VARTA Powersports AGM ACTIVE 53030 (FA) Y60-N30L-A 30Ah Motorcycle Battery 12V (DIN 53030)

Bosch C10 Battery Charger – Powerful, Safe & Reliable (3.5 A) 12V The Bosch C10 battery charger stands for intelligent charging technology, the highest safety and proven Bosch quality. With a charging power of 3.5 amps It charges vehicle batteries efficiently and gently – ideal for daily use as well as for longer downtimes. Thanks to the automatic, microprocessor-controlled charging process The C30 automatically detects the battery status and adjusts the charging parameters optimally. This extends the life of the battery and reliably prevents overcharging. The compact, robust design makes the charger special user-friendly – simply connect, turn on and the rest runs automatically. Perfectly suited for Car, motorcycle and other 12 V batteries. Your advantages at a glance: 3.5 A charging power – fast & battery-friendlyIntelligent automatic charging with conservation functionHigh security by overcharge and short circuit protectionBosch brand quality – durable & reliableCompact & lightweight – ideal for garage, workshop or on the goBattery technologies - Lead acid, AGM and gel Conclusion:The Bosch C10 is the perfect solution for those who need their battery safe, efficient and effortless want to load. A reliable helper you can rely on at any time.

The Bosch C30 battery charger impresses with modern charging technology, high safety and the proven quality of Bosch. With a charging power of 3.8 amps it is ideal for the efficient and gentle charging of 6 V and 12 V batteries – perfect for cars, motorcycles, vintage cars and other vehicles. The fully automatic, microprocessor-controlled charging process continuously analyzes the battery condition and optimally adjusts current and voltage. This prevents overcharging and permanently extends the life of the battery. The integrated Conservation function reliably keeps batteries at optimal charge even during longer periods of inactivity. Thanks to his compact, robust designs The Bosch C30 is particularly user-friendly and flexible – ideal for garages, workshops or on the go. Your advantages at a glance: 3.8 A charging power – fast, efficient & battery-friendlySuitable for 6 V & 12 V batteries – versatileIntelligente Ladeautomatik mit ErhaltungsfunktionUmfangreiche Schutzmechanismen (Überladung, Kurzschluss, Verpolung)Bosch Markenqualität – langlebig, sicher & zuverlässigBatterietechnologien - Blei-Säure, AGM, Gel, Lithium Fazit:Das Bosch C30 Batterieladegerät ist die ideale Lösung für alle, die Batterien sicher, komfortabel und auf dem neuesten Stand der Technik laden möchten. Ein leistungsstarker Helfer für maximale Einsatzbereitschaft.

In order to deliver maximum performance, your powersport vehicle must be in the best possible condition. Powersport vehicles are often not used for long periods of time. The CT5 POWERSPORT ensures that your powersport vehicle is always ready for use by providing its battery with a trickle charge. The CT5 POWERSPORT has been specially developed for charging and maintaining Powersport batteries and, thanks to its advanced technology, offers three fully automatic charging and maintenance programs. Normal: Suitable for all types of lead-acid batteries, including AGM, lithium*: For lithium* batteries and reconditioning. If required, it can be connected directly and indefinitely to the battery, ensuring that the battery is neither overcharged nor undercharged. The charger is easy to use and supports all types of Powersport batteries with a working voltage of 12 V. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP) Functions Practical and easy to use Testing and restoring the battery capacity output current: max. 2.3 A non-sparking reverse polarity protected short-circuit proof

Test winner of the charger comparison test of Autobild (issue 43/2010). Ctek battery charger suitable for all types of 12V lead-acid batteries (wet, maintenance-free, AGM, calcium/calcium and gel batteries) The MXS 5.0 is a charger equipped with the latest technology, which was previously reserved for CTEK professional devices. The charger solves a range of battery problems; it is the perfect charger for users with the highest demands. The MXS 5.0 offers a range of features, such as battery diagnostics that indicate whether the battery can accept and hold a charge, a special reconditioning function that recovers deeply discharged batteries with acid stratification, a unique maintenance charging function, a mode for optimized charging on cold winter days and the ability to charge demanding AGM batteries (i.e. Optima). The unique display allows the user to follow the entire charging process. The MXS 5.0 is a fully automatic 8-stage charger with a selectable charging current between 0.8 A and 5 A for 12V batteries from 1.2 - 110Ah and for maintenance charging up to 160Ah. The charger has protection class IP65 (protected against dust and splash water), was built to protect vehicle electronics systems, is protected against sparks, reverse polarity and short circuits. Details: Desulphation Perfect charge and charge retention Unique regeneration of deeply discharged batteries CTEK's 8-stage now visible via LED display Electronics safe Splashproof and dustproof (IP 65) Pulse charge retention GS tested

Tests the voltage, starting power and performance of the alternator The MXS 5.0 TEST & CHARGE is designed for batteries between 1.2 Ah and 110 Ah. The test function includes three easy-to-use programs for testing battery voltage, starting power and alternator performance, providing a complete picture of the battery state of charge and system health of the vehicle charging system. In addition, the MXS 5.0 TEST & CHARGE features a patented automatic desulphation program and CTEK's patented Float/Pulse system. This is the most efficient trickle charge mode when a battery is left connected to the charger for an extended period of time. Functions Charging of batteries between 1.2 Ah and 110 Ah Patented float/pulse trickle charge Easy to read LED display splash-proof and dust-proof (IP65) non-sparking reverse polarity protected short-circuit proof

The XS 0.8 is the smallest 12V charger from CTEK. It is equipped with the latest technology and is perfect for charging smaller 12V batteries, such as those found in motorcycles, jet skis, quads and lawnmowers. It is also suitable for maintenance charging of "normal" sized batteries, such as car batteries. The unique display allows the user to follow the entire charging process. The XS 0.8 is a compact, fully automatic 6-stage charger for 12V batteries from 1.2 - 32Ah and for maintenance charging of up to 100Ah. The XS 0.8 has protection class IP 65 (protected against dust and splash water), delivers 0.8A and protects the vehicle electronics. It is protected against sparks, reverse polarity and short circuits. The XS 0.8 is supplied with a 5-year guarantee.

Noqon NPC4 6V/12V battery charger with 4A charging current The car battery charger is an 11-step car battery charger suitable for charging and trickle charging 6V or 12V lead-acid batteries (batteries) with liquid electrolyte (WET), maintenance-free lead-acid batteries (MF), gel electrolyte (GEL) or electrolyte-absorbing mats (AGM). Select the desired charging voltage (6V or 12V) and the microprocessor-controlled charger takes care of everything fully automatically until the charging cycle is complete and the batteries are fully charged. The German-language display is easy to understand and convenient to operate. Thanks to the test function, battery charge levels can be determined before charging and the integrated memory function continues the charging process even after power interruptions without having to start from the beginning. There aresix charging programs to choose from. Fully automatic battery charging takes place in 11 charging steps. Modern safety technology with reverse polarity protection, overheating protection, overload protection and short-circuit protection protects you and the device from incorrect operation. Two cables with quick connectors and comfort plugs (permanent charging cable with eyelets for fixed installation & charging cable with clamps) are included with the jet-proof and dust-proof device (protection class IP65). Features: Suitable for continuous charging Test function/battery tester Memory function 6 charging programs 11 charging steps Technical data: Specification: at 12 V: 3.8 A / 0.8 A, 6 V: 0.8 A, microprocessor-controlled Power supply: 230V, 50 Hz220V - 240V, 50Hz Charging voltage: 7.2V/7.4V ±0.25 VDC - 14.4V/14.7V ±0.25 VDC Rated output current: 6V: 0.8A ±10% / 12V: 0.8A / 3.8A ±10% Current consumption: Max. 0.9 A / 230 V Charger type: 11 charging steps, automatic charging cycle Ambient temperature: -10 to +40 °C Reverse current: 0.2 mA after completion of charging (if charger remains connected to 230 V) 50 mA if charger disconnected from 230 V. Battery type: 6V & 12V lead-acid batteries (Wet, MF, GEL, EFB, AGM) Recommended battery capacity: 6V: 1.2 - 14Ah / 12V: 1.2 - 120Ah Protection class: IP65, protected against water jets Protection: Reverse polarity, thermal and overload protection, time control Scope of delivery: 1 x Noqon NPC4 battery charger 1 x crocodile clips 1 x quick contact cable with ring terminals

PACO MEC1205 5A/12V battery charger

PACO MEC1210 10A/12V battery charger

VARTA Powerzone VPZ-LOAD 1000 Plus The Varta Powerzone VPZ-LOAD 1000 Plus charger takes away all your worries about your car battery. Whether you have an AGM, GEL, lead-acid, VRLA or wet battery, this charger will charge it for you. It has an advanced and intelligent microprocessor that controls the charging process. In addition, automatic diagnostic, rescue, charging, maintenance and charge retention functions are fully covered by the VPZ-LOAD 1000 Plus. Removing or disconnecting the car battery is no longer necessary with this device. Set the required battery voltage manually and connect the charger to the battery. Provided everything has been set correctly, the Varta VPZ-LOAD 1000 Plus charger will carry out the necessary measures for proper and gentle charging. You can also leave the charger permanently connected to the battery (when stationary) using the charge retention function. If the charger detects a defect or an incorrect setting, an error (display: "ER-X") is displayed. Safety functions To guarantee complete safety during charging, the charger is equipped with extensive safety functions. These safety functions provide protection for/against: Reverse polarity short circuits overheating Overcharge protection overvoltage Charging with defective batteries (automatic charge termination) Sparking Charging stages The charger has a 7-stage charging control, which is controlled and regulated by a microprocessor. This means that the charging stages are set automatically depending on the battery condition. Stage 1 - DiagnosisStage 2 - Pre-chargingStage 3 - SoftStartStage 4 - Main charging phaseStage 5 - Saturation chargingStage 6 - Rest/overgrowth phaseStage 7 - Continuous charge maintenance Technical data Charging voltage: 6V / 12VMax. charging current: 1ASupported batteries: AGM, GEL, lead-acid, lead-calcium, VRLA, ML, SLArecommended capacity: 2Ah-110AhLength: 125mmWidth: 78mmheight: 40mmWeight: 0.8kg Scope of delivery 1x Varta Powerzone VPZ LOAD 1000 Plus charger1x pole terminal adapter 0.6m1x ring lug adapter 0.6m1x cigarette lighter adapter 0.6m1x extension 3m1x storage bag1x detailed operating instructions

VARTA Powerzone VPZ-LOAD 5000 Plus The Varta Powerzone VPZ-LOAD 5000 Plus charger takes away all your worries about your car battery. Whether you have an AGM, GEL, lead-acid, VRLA or wet battery, this charger will charge it for you. It has an advanced and intelligent microprocessor that controls the charging process. In addition, automatic diagnostic, rescue, charging, maintenance and charge retention functions are fully covered by the VPZ-LOAD 5000 Plus. Removing or disconnecting the car battery is no longer necessary with this device. Set the required battery voltage manually and connect the charger to the battery. If everything has been set correctly, the Varta VPZ-LOAD 5000 Plus charger will carry out the necessary measures for proper and gentle charging. You can also leave the charger permanently connected to the battery (when stationary) using the charge retention function. If the charger detects a defect or an incorrect setting, an error (display: "ER-X") is displayed. Safety functions To guarantee complete safety during charging, the charger is equipped with extensive safety functions. These safety functions provide protection for/against: Reverse polarity short circuits overheating Overcharge protection overvoltage Charging with defective batteries (automatic charge termination) Sparking Charging stages The charger has a 7-stage charging control, which is controlled and regulated by a microprocessor. This means that the charging stages are set automatically depending on the battery condition. Stage 1 - DiagnosisStage 2 - Pre-chargingStage 3 - SoftStartStage 4 - Main charging phaseStage 5 - Saturation chargingStage 6 - Rest/overgrowth phaseStage 7 - Continuous charge maintenance Technical data Charging voltage: 6V / 12V Max. charging current: 5ASupported batteries: AGM, GEL, lead-acid, lead-calcium, VRLA, ML, SLArecommended capacity: 2Ah-110AhLength: 150mmWidth: 80mmheight: 45mmWeight: 0.8kg Scope of delivery 1x charger Varta Powerzone VPZ LOAD 5000 Plus1x pole terminal adapter 0.6m1x ring terminal adapter 0.6m1x cigarette lighter adapter 0.6m1x extension 3m1x detailed operating instructions

Plastic-compatible special grease based on lime soap. Protects battery terminals and electrical contacts from corrosion and oxidation. For safe starting, bright lighting and longer battery life. Prevents acid damage, is compatible with plastics and prevents leakage currents. Prevents the contact resistance from increasing during operation and ensures a lower loss than with untreated contacts. Labeled according to DIN 51502 K2G-30. Temperature range: -30 °C to +100 °C.

Bluetooth battery tester for car & motorcycle KONNWEI BK100 6V/12V Different from the traditional test method. The KONNWEI BK100 uses the latest Bluetooth technology to detect the car battery,You no longer need to stand in front of the car and wait for the test. After you have connected the car battery, you can open the appon your phone/tablet to test the car battery, which is customer-friendly and easy to use.With the KONNWEI BK100 car battery tester, we can check the overall condition of the battery, including the cranking test, and perform acomplete system charge test. The starter test is used to test and analyze the starter motor to check if the starter is working properly.The charging test is used to check the condition of the charging system to prevent damage to the battery. This is much more convenient than drivingthan driving a few kilometers to a nearby garage.Our Bluetooth car battery tester is compatible with all 6-volt and 12-volt lead-acid batteries, including normal flooded batteries, AGM flat batteries, AGM spiral batteries,GEL and EFB batteries with the test range (100-2000 CCA). Compatible with cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, lawnmowers and even golf carts. The KONNWEI BK100 is plug-and-play and provides accurate test reports within seconds, the test speed compared to other battery testers is tremendous. It also has a reverse polarity protection function. Reverse polarity of the clip will not damage the tester and has no adverse effect on the car and battery. KONNWEI BK100 can directly test the power loss of the battery without the need to fully charge and test it first.Support for multiple languages such as English, Spanish, German, Russian, Italian, French, Portuguese, etc. The actual language depends ondepends on the system language setting of your phone/tablet. The language display will follow the change of your system language.

DHC analog battery tester 100A 6V/12V

BA18-K Battery isolator switch (motorcycle) 62 x 25 x 38mm Max. 160A / 10 sec. - Mini design - Fully insulated housing - Flex. Mounting between negative pole and vehicle 200 mm / 6 mm2 jumper cable included in scope of delivery

VOLTIMA JUMP STARTER 500A Maintenance-free, battery-free and cold-resistant to safely recharge an almost empty vehicle battery in less than 2 minutes. DescriptionSmooth ABS housing with beautiful design. This ultracapacitor jump starter can recharge a nearly dead battery in less than 2 minutes because it contains ultracapacitors instead of lithium battery which is more versatile, this greatly reduces the risk of fire or exploration hazards. Not only that, this device is tested to be able to jump start over 10,000 times and has an average lifespan of over 10 years with normal use and care. Outstanding performance even in a harsh environment down to -40C °. _______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ 3 EASY STEPS TO JUMP START YOUR CAR! Connect to the car battery Press the on/off switch and wait 1-2 minutes Ready to start your car _______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Features Maintenance free Super safe, full protection 2 min. instant charge LCD display Easy to use and carry Compact size 10,000 cycles (lifetime) ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ applications Starting current: 500A Peak current: 1000A Charging voltage: 12V Operating temperature: -40C° to 65°C( -40°F to 149°F) Dimensions: (mm): 200 x 57 x 136mm Weight: 1.15Kg ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

The Start Alarm 124 from Votronic (MPN 0161) is a warning device with an acoustic (beeper) and visual (LED) alarm signal for the starter battery in vehicles with only one battery circuit (in accordance with DIN EN 1789, section 4.3.2). It is intended to warn the vehicle driver in good time of a battery that is no longer able to start. An additional horn, consumer relay or similar can be connected via a switching output (PNP, positive output max. 0.5 A). The self-consumption is less than 3 mA (according to DIN EN 13976). Connection via plug-in screw terminal. Key product features for 12V and 24V battery voltage max. switching current 0.5A Switching threshold undervoltage: 11.5V at 12V or 23V at 24V battery voltage Switching threshold overvoltage: 12.5V at 12V or 25V at 24V battery voltage Dimensions without connections: 70 x 36 x 17 mm Weighs only 30 grams Scope of delivery: 1x Votronic 0161 Start Alarm 1241x operating instructions