The Growatt APX Battery Base is suitable for the floor installation of Growatt APX battery modules and the associated BMS. The Growatt APX system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. APX battery base for floor mounting of Growatt APX batteries and associated BMSOne base per battery towerDimensions: 690 x 185 x 50 mm The APX battery system The Growatt APX battery system has a modular design and additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5kWh and the BMS has a maximum (discharge) current of 13A or 26A. This means that a capacity of 5-30 kWh can be achieved and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which results in a more cost-effective battery, for example. Scope of delivery: 1x Growatt APX battery base

The Growatt ARK Battery Base is suitable for the floor installation of Growatt ARK battery modules and ensures that the battery tower stands securely. The Growatt ARK system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. ARK battery base for floor mounting of Growatt ARK HV and XH batteriesOne base per battery towerWeight: 3kg The ARK battery system The Growatt ARK battery system has a modular design. Additional batteries can be stacked on top of each other. The ARK-2.5L-A1 has a capacity of 2.56 kWh and a maximum (discharge) current of 25A. The nominal voltage is 51.2 V and the operating voltage is between 47.2 V and 56.8 V. The lithium iron phosphate battery (LFP) is cobalt-free, which results in a more cost-effective battery, for example. The battery has a service life of over 6000 cycles. Scope of delivery: 1x Growatt ARK battery base

Growatt HVC 60050-A1 high-voltage battery management system for your energy storage solution. CompatibilityThe BMS is required to operate the ARK 2.5 High Voltage batteries. It can be used together with all 3-phase Growatt hybrid inverters of the SPH and SPA series. (SPH4000TL3 BH up to and including SPH10000TL3 BH and Growatt SPA4000TL3 BH - SPA10000TL3 BH) Smart High Voltage Battery Management System (dynamic control of charging power and protection against overloading the home network)Compatible with the ARK battery seriesFlexible capacity options, 5.12kWh to 25.62kWhEasy installationModular designLong service lifeMaximum protection for your home system thanks to integrated protection functions for your battery system (overvoltage, undervoltage, overload, short-circuit and overtemperature protection)Indoor useReliable and durable BMSEasy integration into existing and newly installed PV systemsSeamless integration into the entire Growatt Home ecosystemRemote firmware upgrade Warranty: 10-year Growatt warranty (see warranty document in Downloads) Scope of delivery The Growatt HVC 60050-A1 High Voltage Battery Management System.

The Growatt ATS-T is a 3-phase transfer switch and controls the changeover of the switching device to provide power to the EPS load both when connected to the grid and in stand-alone operation. It is used with Growatt inverters from the SPH and SPA series. The ATS-T can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230V/400VacFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 3.8 kgDimensions: 312 x 295.4 x 85 mm Scope of delivery: 1x Growatt ATS-T 3-phase transfer switch

This is a Growatt cable set for SPH inverters and ARK-2.5L-A1 LV . A power cable and a communication cable for easy plug-and-play installation of Growatt ARK-2.5L-A1 lithium battery and Growatt SPH 3000 and Growatt SPH3600 . This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set for ARK-2.5L-A1 LV? Then simply contact us by e-mail or telephone.

This Growatt cable set is a necessary connection cable between the ARK 2.5H-A1 HV battery units and the SPH inverters. The kit includes power cables and a communication cable for easy plug-and-play installation of the Growatt ARK 2.5H-A1 HV lithium battery and the Growatt SPH 6000-10000 3-phase hybrid inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or telephone.

Growatt BDC 95045-A1 high-voltage battery management system for your energy storage solution.CompatibilityGrowatt BDC 95045-A1 High Voltage Battery Management System is designed for the ARK 2.5H-A1 High Voltage battery units.It is also suitable for communication with the following hybrid inverters from the Growatt MIN-XH and MOD-XH series: MIN2500-6000 TL-XH, MOD3000-10000 TL3-XHSmart High Voltage Battery Management System (dynamic control of charging power and protection against overloading the home network)Compatible with the ARK seriesFlexible capacity options, 5.12kWh to 25.62kWhEasy installationModular designLong service lifeMaximum protection for your home system thanks to integrated protection functions for your battery system (overvoltage, undervoltage, overload, short-circuit and overtemperature protection)Indoor useReliable and durable BMSEasy integration into existing and newly installed PV systemsSeamless integration into the entire Growatt Home ecosystemRemote firmware upgradeWarranty:10-year Growatt warranty (see warranty document in Downloads)Scope of deliveryThe Growatt BDC 95045-A1 High Voltage Battery Management System

The Growatt battery cable set is required to connect Growatt ARK2.5H-A1 batteries to MIN or MOD-XH series inverters. Contents 2x 2m power cable (plus/minus)2m communication cable2m earthing cable ARK high-voltage battery system The ARK battery system from Growatt offers a high degree of flexibility thanks to its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Another innovation of the ARK system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand. Scope of delivery: 1x Growatt battery connection cable set for MIN and MOD-XH inverters

The connection cable for the APX series from Growatt connects two battery towers of the system with each other. This ensures trouble-free communication between all components. The APX battery system The Growatt APX battery system has a modular design and additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5kWh and the BMS has a maximum (discharge) current of 13A or 26A. This means that a capacity of 5-30 kWh can be achieved and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which results in a more cost-effective battery, for example. Scope of delivery: 1x Growatt APX connection cable series connection

The SYN 50-XH-30 from Growatt is a back-up box that acts as an emergency backup power supply for the house and is able to provide up to 10kW from the solar storage system in the event of a power failure. The switchover time is 0.5 seconds. The Back-Up Box is characterized by a user-friendly design, which enables uncomplicated installation and operation. The SYN Back-Up Box Backup power supply for the entire house, up to 10 kW100% 3-phase asymmetrical outputIntegrated switchEasy to installCan be combined with the entire Growatt MOD-XH BP series Compatibility To achieve off-grid operation of a Growatt MOD-XH BP inverter, the SYN 50-XH-30 can be combined as an option. The following hybrid inverters are intended for this purpose: MOD 3KTL3-XH BP MOD 4KTL3-XH BP MOD 5KTL3-XH BP MOD 6KTL3-XH BP MOD 7KTL3-XH BP MOD 8KTL3-XH BP MOD 9KTL3-XH BP MOD 10KTL3-XH BP The MOD-XH-BP series 2 independent MPPTsBattery-ready, future-proofType II SPD on DC and AC sideIntegrated AFCI functionSupport for export limitationOLED and touch buttonDC/AC ratio up to 2.0Off-grid function possible with optional accessories Hybrid inverter In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the solar system into the grid, but also store it in batteries. This means that the solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before feeding it into the grid. Active safety with AFCI function An Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. In addition to providing protection, it analyzes current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. Colloquially, the AFCI is also known as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. The APX battery system All the inverters mentioned above are compatible with the APX battery system. Thanks to the modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be installed with a minimum of one and a maximum of six APX 5.0P-B1 battery modules. One power module per tower is required for operation, choosing between the APX 98020-P1 or the APX 98034-P2. The BMS must be purchased separately and an additional base is required for floor mounting. Flexible expansion The APX battery system from Growatt demonstrates its flexible configuration options. These can be expanded from 5kWh to 30kWh. The simple and modular design makes installation and expansion very straightforward with the help of cables. Another advantage of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only a battery base is required for a secure stand. The APX series supports the combination of mixed battery packs from new and old batches, as well as different capacities. Technical data of the Back-Up Box Max. Overcurrent protection AC input: 63 AMax. Continuous input current: 50 AAC output voltage: 230 V/400 VAC output voltage range: 180-280 VAC frequency: 50/60 HzAC frequency range: 45-65 HzAC rated power: 18 kWMax. continuous input current at 230 V: 26.1 APeak AC power in backup mode: 19.8k WAC peak current in backup mode: 28.7 ACommunication: RS485Operating temperature range: -40°C - +60°CProtection class: IP65Weight: 10.8 kgDimensions: 365 x 450 x 123 mm Scope of delivery: 1x Growatt SYN 50-XH-30 Back-Up Box

The Growatt ATS-S is a single-phase transfer switch and controls the changeover of the switching device both when connected to the power grid and in stand-alone operation in order to provide power to the EPS load. It is used with Growatt inverters from the SPH and SPA series. The ATS-S can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230 VFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 2.38 kgDimensions: 250 x 200 x 86 mm Scope of delivery: 1x Growatt ATS-S 1-phase transfer switch

This Growatt cable set is for connecting SPH inverters and 2x GBLI batteries if you want to connect two such batteries in parallel. These are power cables and communication cables for easy plug-and-play installation of the Growatt GBLI6532 lithium battery and the Growatt SPH 3000 and 3600 inverter. This Growatt cable set is mandatory when connecting two GBLI batteries to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 2 communication cables in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or give us a call.

The SYN 50-XH-30 from Growatt is a back-up box that acts as an emergency backup power supply for the house and is able to provide up to 10kW from the solar storage system in the event of a power failure. The switchover time is 0.5 seconds. The Back-Up Box is characterized by a user-friendly design, which enables uncomplicated installation and operation. The SYN Back-Up Box Backup power supply for the entire house, up to 10 kW100% 3-phase asymmetrical outputIntegrated switchEasy to installCan be combined with the entire Growatt MOD-XH BP series Compatibility To achieve off-grid operation of a Growatt MOD-XH BP inverter, the SYN 50-XH-30 can be combined as an option. The following hybrid inverters are intended for this purpose: MOD 3KTL3-XH BP MOD 4KTL3-XH BP MOD 5KTL3-XH BP MOD 6KTL3-XH BP MOD 7KTL3-XH BP MOD 8KTL3-XH BP MOD 9KTL3-XH BP MOD 10KTL3-XH BP The MOD-XH-BP series 2 independent MPPTsBattery-ready, future-proofType II SPD on DC and AC sideIntegrated AFCI functionSupport for export limitationOLED and touch buttonDC/AC ratio up to 2.0Off-grid function possible with optional accessories Hybrid inverter In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the solar system into the grid, but also store it in batteries. This means that the solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before feeding it into the grid. Active safety with AFCI function An Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. In addition to providing protection, it analyzes current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. Colloquially, the AFCI is also known as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. The APX battery system All the inverters mentioned above are compatible with the APX battery system. Thanks to the modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be installed with a minimum of one and a maximum of six APX 5.0P-B1 battery modules. One power module per tower is required for operation, choosing between the APX 98020-P1 or the APX 98034-P2. The BMS must be purchased separately and an additional base is required for floor mounting. Flexible expansion The APX battery system from Growatt demonstrates its flexible configuration options. These can be expanded from 5kWh to 30kWh. The simple and modular design makes installation and expansion very straightforward with the help of cables. Another advantage of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only a battery base is required for a secure stand. The APX series supports the combination of mixed battery packs from new and old batches, as well as different capacities. Technical data of the Back-Up Box Max. Overcurrent protection AC input: 63 AMax. Continuous input current: 50 AAC output voltage: 230 V/400 VAC output voltage range: 180-280 VAC frequency: 50/60 HzAC frequency range: 45-65 HzAC rated power: 18 kWMax. continuous input current at 230 V: 26.1 APeak AC power in backup mode: 19.8k WAC peak current in backup mode: 28.7 ACommunication: RS485Operating temperature range: -40°C - +60°CProtection class: IP65Weight: 10.8 kgDimensions: 365 x 450 x 123 mm Scope of delivery: 1x Growatt SYN 50-XH-30 Back-Up Box

This Growatt cable set is for SPH inverters and GBLI batteries. A power cable and a communication cable for easy plug-and-play installation of the Growatt GBLI6532 lithium battery and the Growatt SPH 3000 and 3600 inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or give us a call.

The Growatt APX Battery Base is suitable for the floor installation of Growatt APX battery modules and the associated BMS. The Growatt APX system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. APX battery base for floor mounting of Growatt APX batteries and associated BMSOne base per battery towerDimensions: 690 x 185 x 50 mm The APX battery system The Growatt APX battery system has a modular design and additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5kWh and the BMS has a maximum (discharge) current of 13A or 26A. This means that a capacity of 5-30 kWh can be achieved and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which results in a more cost-effective battery, for example. Scope of delivery: 1x Growatt APX battery base

The Growatt ATS-S is a single-phase transfer switch and controls the changeover of the switching device both when connected to the power grid and in stand-alone operation in order to provide power to the EPS load. It is used with Growatt inverters from the SPH and SPA series. The ATS-S can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230 VFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 2.38 kgDimensions: 250 x 200 x 86 mm Scope of delivery: 1x Growatt ATS-S 1-phase transfer switch

The connection cable for the APX series from Growatt connects two battery towers of the system with each other. This ensures trouble-free communication between all components. The APX battery system The Growatt APX battery system has a modular design and additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5kWh and the BMS has a maximum (discharge) current of 13A or 26A. This means that a capacity of 5-30 kWh can be achieved and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which results in a more cost-effective battery, for example. Scope of delivery: 1x Growatt APX connection cable series connection

This is a Growatt cable set for SPH inverters and ARK-2.5L-A1 LV . A power cable and a communication cable for easy plug-and-play installation of Growatt ARK-2.5L-A1 lithium battery and Growatt SPH 3000 and Growatt SPH3600 . This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set for ARK-2.5L-A1 LV? Then simply contact us by e-mail or telephone.

The Growatt ARK Battery Base is suitable for the floor installation of Growatt ARK battery modules and ensures that the battery tower stands securely. The Growatt ARK system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. ARK battery base for floor mounting of Growatt ARK HV and XH batteriesOne base per battery towerWeight: 3kg The ARK battery system The Growatt ARK battery system has a modular design. Additional batteries can be stacked on top of each other. The ARK-2.5L-A1 has a capacity of 2.56 kWh and a maximum (discharge) current of 25A. The nominal voltage is 51.2 V and the operating voltage is between 47.2 V and 56.8 V. The lithium iron phosphate battery (LFP) is cobalt-free, which results in a more cost-effective battery, for example. The battery has a service life of over 6000 cycles. Scope of delivery: 1x Growatt ARK battery base

The Growatt ATS-T is a 3-phase transfer switch and controls the changeover of the switching device to provide power to the EPS load both when connected to the grid and in stand-alone operation. It is used with Growatt inverters from the SPH and SPA series. The ATS-T can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230V/400VacFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 3.8 kgDimensions: 312 x 295.4 x 85 mm Scope of delivery: 1x Growatt ATS-T 3-phase transfer switch

This Growatt cable set is a necessary connection cable between the ARK 2.5H-A1 HV battery units and the SPH inverters. The kit includes power cables and a communication cable for easy plug-and-play installation of the Growatt ARK 2.5H-A1 HV lithium battery and the Growatt SPH 6000-10000 3-phase hybrid inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or telephone.

Growatt BDC 95045-A1 high-voltage battery management system for your energy storage solution.CompatibilityGrowatt BDC 95045-A1 High Voltage Battery Management System is designed for the ARK 2.5H-A1 High Voltage battery units.It is also suitable for communication with the following hybrid inverters from the Growatt MIN-XH and MOD-XH series: MIN2500-6000 TL-XH, MOD3000-10000 TL3-XHSmart High Voltage Battery Management System (dynamic control of charging power and protection against overloading the home network)Compatible with the ARK seriesFlexible capacity options, 5.12kWh to 25.62kWhEasy installationModular designLong service lifeMaximum protection for your home system thanks to integrated protection functions for your battery system (overvoltage, undervoltage, overload, short-circuit and overtemperature protection)Indoor useReliable and durable BMSEasy integration into existing and newly installed PV systemsSeamless integration into the entire Growatt Home ecosystemRemote firmware upgradeWarranty:10-year Growatt warranty (see warranty document in Downloads)Scope of deliveryThe Growatt BDC 95045-A1 High Voltage Battery Management System

Growatt HVC 60050-A1 high-voltage battery management system for your energy storage solution. CompatibilityThe BMS is required to operate the ARK 2.5 High Voltage batteries. It can be used together with all 3-phase Growatt hybrid inverters of the SPH and SPA series. (SPH4000TL3 BH up to and including SPH10000TL3 BH and Growatt SPA4000TL3 BH - SPA10000TL3 BH) Smart High Voltage Battery Management System (dynamic control of charging power and protection against overloading the home network)Compatible with the ARK battery seriesFlexible capacity options, 5.12kWh to 25.62kWhEasy installationModular designLong service lifeMaximum protection for your home system thanks to integrated protection functions for your battery system (overvoltage, undervoltage, overload, short-circuit and overtemperature protection)Indoor useReliable and durable BMSEasy integration into existing and newly installed PV systemsSeamless integration into the entire Growatt Home ecosystemRemote firmware upgrade Warranty: 10-year Growatt warranty (see warranty document in Downloads) Scope of delivery The Growatt HVC 60050-A1 High Voltage Battery Management System.

This Growatt cable set is for SPH inverters and GBLI batteries. A power cable and a communication cable for easy plug-and-play installation of the Growatt GBLI6532 lithium battery and the Growatt SPH 3000 and 3600 inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or give us a call.