The Growatt APX Battery Base is suitable for the floor installation of Growatt APX battery modules and the associated BMS. The Growatt APX system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. APX battery base for floor mounting of Growatt APX batteries and associated BMSOne base per battery towerDimensions: 690 x 185 x 50 mm The APX battery system The Growatt APX battery system has a modular design and additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5kWh and the BMS has a maximum (discharge) current of 13A or 26A. This means that a capacity of 5-30 kWh can be achieved and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which results in a more cost-effective battery, for example. Scope of delivery: 1x Growatt APX battery base

The Growatt ARK Battery Base is suitable for the floor installation of Growatt ARK battery modules and ensures that the battery tower stands securely. The Growatt ARK system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. ARK battery base for floor mounting of Growatt ARK HV and XH batteriesOne base per battery towerWeight: 3kg The ARK battery system The Growatt ARK battery system has a modular design. Additional batteries can be stacked on top of each other. The ARK-2.5L-A1 has a capacity of 2.56 kWh and a maximum (discharge) current of 25A. The nominal voltage is 51.2 V and the operating voltage is between 47.2 V and 56.8 V. The lithium iron phosphate battery (LFP) is cobalt-free, which results in a more cost-effective battery, for example. The battery has a service life of over 6000 cycles. Scope of delivery: 1x Growatt ARK battery base

The connection cable for the APX series from Growatt connects two battery towers of the system with each other. This ensures trouble-free communication between all components. The APX battery system The Growatt APX battery system has a modular design and additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5kWh and the BMS has a maximum (discharge) current of 13A or 26A. This means that a capacity of 5-30 kWh can be achieved and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which results in a more cost-effective battery, for example. Scope of delivery: 1x Growatt APX connection cable series connection

Growatt HVC 60050-A1 high-voltage battery management system for your energy storage solution. CompatibilityThe BMS is required to operate the ARK 2.5 High Voltage batteries. It can be used together with all 3-phase Growatt hybrid inverters of the SPH and SPA series. (SPH4000TL3 BH up to and including SPH10000TL3 BH and Growatt SPA4000TL3 BH - SPA10000TL3 BH) Smart High Voltage Battery Management System (dynamic control of charging power and protection against overloading the home network)Compatible with the ARK battery seriesFlexible capacity options, 5.12kWh to 25.62kWhEasy installationModular designLong service lifeMaximum protection for your home system thanks to integrated protection functions for your battery system (overvoltage, undervoltage, overload, short-circuit and overtemperature protection)Indoor useReliable and durable BMSEasy integration into existing and newly installed PV systemsSeamless integration into the entire Growatt Home ecosystemRemote firmware upgrade Warranty: 10-year Growatt warranty (see warranty document in Downloads) Scope of delivery The Growatt HVC 60050-A1 High Voltage Battery Management System.

The Growatt ATS-T is a 3-phase transfer switch and controls the changeover of the switching device to provide power to the EPS load both when connected to the grid and in stand-alone operation. It is used with Growatt inverters from the SPH and SPA series. The ATS-T can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230V/400VacFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 3.8 kgDimensions: 312 x 295.4 x 85 mm Scope of delivery: 1x Growatt ATS-T 3-phase transfer switch

With the Growatt ARK-2.5H-A1 2.56 kWh high-voltage battery, you have the option of selecting the desired battery capacity of your Growatt ARK battery system yourself or expanding it at any time. The stackable design allows you to design your storage system from 7.68 kWh to 25.6 kWH. Specifications: Flexible capacity optionsOutstanding safety thanks to cobalt-free LiFePO4 batteryEasy installation due to modular and stackable designRemote firmware upgrade if you own the Shine WiFi SNominal voltage: 51.2 VMax. discharge current: 25 A (0.5 C)Dimensions (in mm) 650 x 260 x170 Weight: 30 kg10-year manufacturer's warrantyCharging cycles: > 6000 (25C) Compatibility In combination with BDC 95045-A1 compatible with all hybrid inverters of the MIN-XH and MOD-XH series In combination with HVC 60050-A1 compatible with all 3-phase hybrid inverters of the SPH and SPA series. (SPH4000TL3 BH up to and including SPH10000TL3 BH and Growatt SPA4000TL3 BH - SPA10000TL3 BH) Warranty: 10-year Growatt warranty (see warranty document in Downloads) Installation We always recommend that you consult an authorized electrician when connecting your battery to ensure a safe and legal installation. The Growatt High Voltage battery ARK-2.5H-A1 2.56 kWh is supplied fully charged by Growatt. If several batteries are subsequently connected, it can take up to 14-90 days until the battery pack is fully balanced and may only then be fully discharged. The length of time depends on the number of charging cycles of the existing batteries. The battery may only be connected when room temperature has been reached. The battery has a protection class of IP65 and can be mounted on a wall or on the floor. Installation on the floor requires a separate base. The battery is 65 cm wide, 26 cm deep, 18 cm high and weighs 30 kg. The battery module can only be operated in conjunction with a battery management system. (Growatt HVC 60050-A1 BMS or BDC 95045-A1 BMS, not included in the scope of delivery).

The NOAH2000 from Growatt (MPN: NOAH2000) is a LiFePO4 battery storage system for your balcony power station and impresses with its high cycle stability and self-heating function, among other things. With a nominal voltage of 51.2 V and a capacity of 2048 Wh, the battery provides you with outstanding performance under high loads. If required, you can flexibly expand the system to a total of up to 8192 Wh. Thanks to the advanced self-heating technology, the battery module also continues to work without any problems in winter environments at sub-zero temperatures. Of course, you can view and control everything in real time using the system monitoring app (ShinePhone). You can connect up to 4 solar modules with a maximum total output of 1800 W directly to the storage system. The storage system can be completed with the matching NEO 800M-X micro inverter. The NOAH2000 at a glance Self-heating functionCycles: 6000+Up to 4 battery modules (total 8192Wh)Up to 4 solar modules (total 1800W)App use - Growatt monitoring platformPlug and playModular and flexibleQuick and easy installation in 5 minutesManufacturer's warranty: 10 yearsCertifications: CE, ROHS, REACH Flexible expansion The NOAH2000 offers a high degree of flexibility thanks to its expandable configuration options, which range from 2048Wh to 8192Wh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Long cycle life The NOAH battery module is an ideal storage solution for your photovoltaic system due to its extremely long cycle life and the use of LiFePo4 cells. The Growatt storage system offers numerous advantages compared to conventional lead batteries and other lithium technologies. Ready for use within a few minutes The storage system uses the NEO 800M-X inverter and is compatible with MC4 connectors. Installation is very easy thanks to the plug-and-play principle. All you have to do is attach the micro inverter to the wall and connect the battery via a connection cable. You can connect up to 4 solar modules of up to 450W each with a total output of 1800W to one module using 2-way Y-connectors. The inputs are located directly on the NOAH2000. Use energy, reduce costs The system stores excess energy in the battery during the day and then makes it available whenever you need it to increase the efficiency of solar power use. Working modes Load First: Solar energy supplies the connected loads with top priority Battery First: Solar charging has top priority for the battery Technical data Battery type: LiFePO4Capacity: 2048 WhMax. Capacity: 8192 Wh (4 battery modules)Max. Charging power: 2000 WNominal voltage: 51.2 VMax. Charging current: 40 AMPPT efficiency: 99%Charging temperature range: 0 - +45°CDischarging temperature: -20 - +45°CProtection class: IP66Weight: 23 kgDimensions: 406 x 235 x 270 mm PV input Recommended PV input power: Max. 2 x 900 WMax. PV input voltage: 60 VMPPT voltage range: 16-60 VMPPT full power voltage range: 30-48 VMax. Input current: 26 A + 26 AMPP tracker: 2Strings per MPP tracker: 1 Battery output (DC to micro inverter) Max. Output power: 800 WOutput voltage range: 40-50 VMax. Output current: 20 A Scope of delivery: 1x Growatt NOAH2000 LiFePO4 battery module 2048Wh 4x extension cable for PV input 3m 2x DC output cable 3m 2x cable fuse 1x mounting bracket 1x MC4 mounting tool

This is a Growatt cable set for SPH inverters and ARK-2.5L-A1 LV . A power cable and a communication cable for easy plug-and-play installation of Growatt ARK-2.5L-A1 lithium battery and Growatt SPH 3000 and Growatt SPH3600 . This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set for ARK-2.5L-A1 LV? Then simply contact us by e-mail or telephone.

This Growatt cable set is a necessary connection cable between the ARK 2.5H-A1 HV battery units and the SPH inverters. The kit includes power cables and a communication cable for easy plug-and-play installation of the Growatt ARK 2.5H-A1 HV lithium battery and the Growatt SPH 6000-10000 3-phase hybrid inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or telephone.

Growatt BDC 95045-A1 high-voltage battery management system for your energy storage solution.CompatibilityGrowatt BDC 95045-A1 High Voltage Battery Management System is designed for the ARK 2.5H-A1 High Voltage battery units.It is also suitable for communication with the following hybrid inverters from the Growatt MIN-XH and MOD-XH series: MIN2500-6000 TL-XH, MOD3000-10000 TL3-XHSmart High Voltage Battery Management System (dynamic control of charging power and protection against overloading the home network)Compatible with the ARK seriesFlexible capacity options, 5.12kWh to 25.62kWhEasy installationModular designLong service lifeMaximum protection for your home system thanks to integrated protection functions for your battery system (overvoltage, undervoltage, overload, short-circuit and overtemperature protection)Indoor useReliable and durable BMSEasy integration into existing and newly installed PV systemsSeamless integration into the entire Growatt Home ecosystemRemote firmware upgradeWarranty:10-year Growatt warranty (see warranty document in Downloads)Scope of deliveryThe Growatt BDC 95045-A1 High Voltage Battery Management System

The Growatt battery cable set is required to connect Growatt ARK2.5H-A1 batteries to MIN or MOD-XH series inverters. Contents 2x 2m power cable (plus/minus)2m communication cable2m earthing cable ARK high-voltage battery system The ARK battery system from Growatt offers a high degree of flexibility thanks to its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Another innovation of the ARK system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand. Scope of delivery: 1x Growatt battery connection cable set for MIN and MOD-XH inverters

Die Growatt ARK 2,5H-A2 Hochvolt Batterie (MPN ARK-2.5H-A2) ist ein LiFePO4-Speicher mit hoher Zyklenfestigkeit und langer Lebensdauer. Das modulare, stapelbare Konzept ermöglicht eine flexible Anwendung für verschiedene Szenarien und ist leicht zu installieren. Die Batterie bietet hervorragende Leistungen bei hoher Belastung und ist mit seinem IP65-Schutz auch für die Installation im Freien geeignet. Um Überspannungen im System zu vermeiden, kommt der Softstart zum Einsatz. Die A2-Version ist der Nachfolger der bisherigen ARK 2,5H-A1 und kann auch mit dieser problemlos kombiniert werden. Über die ARK 2,5H-A2-Batterie: Modulares, stapelbares BatteriekonzeptKobaltfreies Lithium-Eisenphosphat (LFP)Hohe Zyklenfestigkeit und lange LebensdauerWand- oder Bodeninstallation möglichSoftstart zum Schutz des Systems vor ÜberspannungenAutomatisches Aufwachen bei UnterspannungSchutzart IP65 für die Installation im FreienFerndiagnose und Firmware-Update Das ARK-Batteriesystem - Version A1 und A2 kombinierbar Durch das modulare Konzept ist das ARK-System flexibel einsetzbar und bei Bedarf erweiterbar. Ein Batterieturm kann mit mindestens 2 und bis zu 10 Speichermodule errichtet werden, es können auch mehrere Türme in einem System installiert werden. Hierbei kannst du die neue A2 mit der alten A1-Version problemlos kombinieren. Zum Betrieb wird pro Turm ein BMS-Steuerungselement, sowie ein Verbindungskabelset zum entsprechenden Wechselrichter benötigt. Zur Bodeninstallation ist zusätzlich eine Batterie-Basis pro Turm nötig. Die ARK-Hochvolt-Speicher sind mit den MIN- und MOD-XH, sowie den dreiphasigen SPH- und SPA-Wechselrichtern kompatibel. Je nach Inverter-Serie wird eine andere Steuerungseinheit, ein anderes Verbindungskabelset und eine unterschiedliche Startanzahl der Batterien benötigt. Das ARK-XH-System beginnt mit 2, das ARK-HV-System wiederum mit 3 Batterien. Einsatzgebiete Für netzgebundene, sowie autarke PhotovoltaikanlagenNotstromversorgungUnterbrechungsfreie Stromversorgungen (USV / UPS) Flexibel Erweitern Das ARK Batteriesystem von Growatt bietet eine hohe Flexibilität durch seine erweiterbaren Konfigurationsmöglichkeiten, die von 5,12 kWh bis zu 25,6 kWh reichen. Die Installation und Erweiterung des Systems gestaltet sich einfach und unkompliziert durch das modulare Design und die Verwendung von Kabeln. Eine weitere Innovation des ARK Systems ist, dass im Gegensatz zu anderen Batteriesystemen kein Batterieschrank benötigt wird. Lediglich eine Batteriebasis ist für einen stabilen Stand erforderlich. Softstart zum Schutz des Systems Der Softstart-Mechanismus ist eine Schutzfunktion, die bei der Growatt-Batterie zum Einsatz kommt, um das System vor Überspannungen zu schützen. Beim Starten oder Einschalten der Batterie wird die Stromversorgung allmählich erhöht, um das System vor Schäden zu bewahren, die durch eine plötzliche Spannungsspitze verursacht werden könnten. Auf diese Weise wird ein reibungsloser und sicherer Betrieb des Batteriesystems gewährleistet. Hohe Zyklen-Lebensdauer Die Growatt ARK Batteriemodule sind aufgrund ihrer extrem hohen Zyklen-Lebensdauer und der Verwendung von LiFePo4-Zellen eine ideale Speicherlösung für Photovoltaikanlagen. Unabhängig davon, ob es sich um ein netzgeführtes oder ein Inselsystem handelt, bietet der Growatt Speicher im Vergleich zu herkömmlichen Bleibatterien und anderen Lithium-Technologien zahlreiche Vorteile. Technische Daten: Batterie-Typ: Kobaltfreies Lithium-Eisenphosphat (LiFePo4)Energiekapazität: 2,56 kWhNutzbare Kapazität: 2,3 kWhNennspannung: 51,2 VBetriebsspannungsbereich: 47,2-56,8 VLade-/Entladestrom: 25 A/0,5 CSchutzart: IP65Temperaturbereich: -10~50° CAbmessung: 650 x 260 x 180 mmGewicht: ca. 28 kgZertifikate: IEC62619, CE, CEC, RCM, UN38.3 Lieferumfang: 1x Growatt ARK 2,5H-A2 2,56 kWh Hochvoltbatterie1x Batterieverbindungsset

Mit der Anker Solix BP1600 Erweiterungsbatterie (MPN A17C03A1) erhöhst du die Speicherkapazität deiner Solix Solarbank um 1600Wh. Bis zu 5 Akkus können mit einer Solarbank verbunden werden und somit eine Gesamtkapazität von bis zu 9,6kWh bieten. Mit einer lang anhaltenden Lebensdauer von bis zu 6.000 Ladezyklen bieten die Akkus zuverlässig Energie. Die Batterie speichert den überschüssigen Strom, den dein Balkonkraftwerk erzeugt und der momentan nicht im Haushalt genutzt wird für den späteren Gebrauch. Merkmale der BP1600 Erweiterungsbatterie Kapazität mit bis zu 5 Akkus erweiterbar auf bis zu 9,6kWhLanglebige LeistungIP65: Wasser- und StaubgeschütztTemperaturschutz von -20°C - +55°C6000 Ladezyklen10 Jahre HerstellergarantieKompatibel mit Anker SOLIX Solarbank 2 1600 Pro oder Plus Simpel erweiterbar Dank des modularen Designs ist die Installation schnell und unkompliziert - du kannst die Batterien einfach aufeinander stapeln und somit erweitern. Es ist keine zusätzliche Montage nötig und die Erweiterungsakkus verbinden sich ohne weitere Kabel, direkt mit deiner Solarbank. Technische Daten Anzahl erweiterbarer Batterien: 5Kapazität: 1600WhEingangsleistung (Aufladung): 200W Max (Zusatzbatterie)Ausgangsleistung (Entladung): 1000W MaxNennspannung: 16VDCEingangs-/Ausgangsstrom: 75A DC MaxZelltyp: LiFePO4Schutzklasse: IP65Betriebstemperatur: -20°C bis 55°CMaße: 460 x 233 x 217mmGewicht: 18,2kg Lieferumfang 1x Anker Solix BP1600 Erweiterungsakku 1x Zubehörset 1x Sicherheitshinweise

The new GrowattAPX98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. What is important is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature The APX battery system Thanks to its modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be set up with a minimum of one to a maximum of 6 storage modules. One power module per tower is required for operation. This must be purchased separately. An additional base is required for ground mounting. Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15 kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Scope of delivery: 1x Growatt APX 98034-P2 BMS

The SYN 50-XH-30 from Growatt is a back-up box that acts as an emergency backup power supply for the house and is able to provide up to 10kW from the solar storage system in the event of a power failure. The switchover time is 0.5 seconds. The Back-Up Box is characterized by a user-friendly design, which enables uncomplicated installation and operation. The SYN Back-Up Box Backup power supply for the entire house, up to 10 kW100% 3-phase asymmetrical outputIntegrated switchEasy to installCan be combined with the entire Growatt MOD-XH BP series Compatibility To achieve off-grid operation of a Growatt MOD-XH BP inverter, the SYN 50-XH-30 can be combined as an option. The following hybrid inverters are intended for this purpose: MOD 3KTL3-XH BP MOD 4KTL3-XH BP MOD 5KTL3-XH BP MOD 6KTL3-XH BP MOD 7KTL3-XH BP MOD 8KTL3-XH BP MOD 9KTL3-XH BP MOD 10KTL3-XH BP The MOD-XH-BP series 2 independent MPPTsBattery-ready, future-proofType II SPD on DC and AC sideIntegrated AFCI functionSupport for export limitationOLED and touch buttonDC/AC ratio up to 2.0Off-grid function possible with optional accessories Hybrid inverter In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the solar system into the grid, but also store it in batteries. This means that the solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before feeding it into the grid. Active safety with AFCI function An Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. In addition to providing protection, it analyzes current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. Colloquially, the AFCI is also known as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. The APX battery system All the inverters mentioned above are compatible with the APX battery system. Thanks to the modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be installed with a minimum of one and a maximum of six APX 5.0P-B1 battery modules. One power module per tower is required for operation, choosing between the APX 98020-P1 or the APX 98034-P2. The BMS must be purchased separately and an additional base is required for floor mounting. Flexible expansion The APX battery system from Growatt demonstrates its flexible configuration options. These can be expanded from 5kWh to 30kWh. The simple and modular design makes installation and expansion very straightforward with the help of cables. Another advantage of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only a battery base is required for a secure stand. The APX series supports the combination of mixed battery packs from new and old batches, as well as different capacities. Technical data of the Back-Up Box Max. Overcurrent protection AC input: 63 AMax. Continuous input current: 50 AAC output voltage: 230 V/400 VAC output voltage range: 180-280 VAC frequency: 50/60 HzAC frequency range: 45-65 HzAC rated power: 18 kWMax. continuous input current at 230 V: 26.1 APeak AC power in backup mode: 19.8k WAC peak current in backup mode: 28.7 ACommunication: RS485Operating temperature range: -40°C - +60°CProtection class: IP65Weight: 10.8 kgDimensions: 365 x 450 x 123 mm Scope of delivery: 1x Growatt SYN 50-XH-30 Back-Up Box

The APX 5.0P-B1 battery module from Growatt ( MPN APX 5.0P-B1) is a high-voltage battery with proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. In addition, the modular energy optimization ensures that the system fully utilizes the energy of each battery. In order to achieve a very flexible system application, old and new battery batches as well as batteries with different capacities can be mixed and connected. Soft start is used to avoid overvoltage in the system. The APX series is also compatible with the new inverter series with backup function: MOD-XH BP The APX high-voltage battery: Flexible capacity options up to 30kWhCobalt-free LiFePO4 storage technology90% depth of discharge (DoD)Active protection at BMS levelIntegrated modular energy optimizationSupports the combination of new and old battery modules in one systemSoft start to avoid overvoltages in the systemModular and stackable designEasy installation10-year manufacturer's warranty The APX battery system Thanks to its modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be installed with a minimum of one to a maximum of 6 storage modules. One power module per tower is required for operation. You can choose between the APX 98020-P1 or the APX 98034-P2. This must be purchased separately. The BMS must be purchased separately and an additional base is required for ground mounting. Flexible expansion The APX battery system from Growatt demonstrates its flexible configuration options. These can be expanded from 5kWh to 30kWh. The simple and modular design makes installation and expansion very straightforward with the help of cables. A further advance of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only a battery base is required for a secure stand. The APX series supports the combination of mixed battery packs from new and old batches, as well as different capacities. Long cycle life The APX battery system uses LiFePO4 chemistry without cobalt and offers a four-stage protection mechanism through a battery management system (BMS), modular energy optimization, a fuse and aerosol. This ensures increased safety, reliability and a long service life. The modular energy optimization ensures that the system fully utilizes the energy of each individual battery. Regardless of whether the solar system is grid-connected or stand-alone, Growatt storage offers several advantages over typical lead-acid batteries and other lithium technologies. Soft start to protect the system The soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system. Technical data: Battery type: Lithium iron phosphate (LiFePo4)Nominal voltage: 385VNominal energy: 5kWhOperating voltage range: 330-450VWeight: 50kgDimensions: 690 x 185 x 295 mmProtection class: IP66Ambient temperature: -10°C - +50°CCooling: Natural convectionWarranty: 10 year manufacturer's warranty Scope of delivery: 1x Growatt APX 5.0P-B1 5kWh high-voltage battery

This Growatt cable set is for connecting SPH inverters and 2x GBLI batteries if you want to connect two such batteries in parallel. These are power cables and communication cables for easy plug-and-play installation of the Growatt GBLI6532 lithium battery and the Growatt SPH 3000 and 3600 inverter. This Growatt cable set is mandatory when connecting two GBLI batteries to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 2 communication cables in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or give us a call.

The Growatt ATS-S is a single-phase transfer switch and controls the changeover of the switching device both when connected to the power grid and in stand-alone operation in order to provide power to the EPS load. It is used with Growatt inverters from the SPH and SPA series. The ATS-S can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230 VFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 2.38 kgDimensions: 250 x 200 x 86 mm Scope of delivery: 1x Growatt ATS-S 1-phase transfer switch

Der NEXA 2000 von Growatt (MPN: NEXA2000) ist eine innovative All-in-One-Lösung, die Speicher- und Wechselrichterfunktionen in einem kompakten Design vereint. Mit einem leistungsstarken LiFePO4-Speicher von 2048Wh und 4 MPPTs nutzt dieser Power-Speicher die Vorteile der Balkon-Solartechnologie optimal aus. Er ermöglicht eine beeindruckende PV-Eingangsleistung von bis zu 2600W und unterstützt Hochleistungsmodule von bis zu 650W. Er bietet nicht nur Flexibilität, sondern auch eine zuverlässige Notstromversorgung mit einer Off-Grid-Funktion, die kritische Lasten mühelos unterstützt. Mit der Möglichkeit, die Kapazität auf bis zu 8192Wh durch Erweiterungsbatterien zu erhöhen, ist dieser Speicher ideal für zukünftige Energiebedürfnisse. Zusätzlich sorgt die fortschrittliche GaN-Technologie der 3. Generation für eine hohe Effizienz.Dank einfacher App-Bedienung und einer schnellen 2-Minuten-Installation ist der NEXA 2000 benutzerfreundlich und sofort einsatzbereit – selbst bei Temperaturen bis zu -20°C. Mit zahlreichen Funktionen zur Maximierung des Solareigenverbrauchs und Kosteneinsparungen ist der NEXA 2000 die perfekte Wahl für alle, die Wert auf Flexibilität und Zuverlässigkeit legen. Er ist der Nachfolger und die verbesserte Version des NOAH 2000 Batteriemodells.Deine Vorteile mit dem NEXA 2000All-In-One Design4 MPPTs mit 2600W PV-Leistung800W Off-Grid-Leistung - NotstromversorgungMehr als 6000 ZyklenFlexibel erweiterbar, auf bis zu 8192WhGaN-Technologie der 3. GenerationTime-of-Use OptimierungsfunktionEnergiekosteneinsparungenPower+ Funktion erhöht die AusgangsleistungNull EnergieverschwendungIP66 WasserfestBetriebsbereit ab -20°CBedienung per AppSchnelle 2-Minuten-InstallationClevere Funktionen und ModiDer Speicher ist mit einer cleveren TOU (Time-of-Use)-Optimierungsfunktion ausgestattet, welche dir hilft Stromkosten zu sparen. Diese Funktion ermöglicht es, die Batterie während der Niedrigpreiszeiten mit Netzstrom zu laden und gespeicherte Energie bei hohen Tarifen zu nutzen, was zu deutlichen Kosteneinsparungen führt. Das System bietet außerdem verschiedene Betriebsmodi, um deine Energienutzung optimal zu gestalten. Im „Load First Mode“ wird die Solarenergie vorrangig für den Haushaltsbedarf genutzt. Im „Battery First Mode“ kann die Batterie sowohl durch Solarstrom als auch durch Netzstrom geladen werden, was eine schnellere Aufladung und eine stets verfügbare Backup-Kapazität sicherstellt. Die „Smart Self-Consumption Mode“ hingegen passt das Laden und Entladen flexibel an deinen aktuellen Stromverbrauch an. Mithilfe intelligenter Zähler wird der reale Bedarf erfasst, sodass die Energie effizient genutzt wird.800W Netzunabhängige LeistungBei plötzlichen Stromausfällen sorgt der netzunabhängige Anschluss der NEXA 2000 dafür, dass deine wichtigen Geräte weiterhin zuverlässig mit Strom versorgt werden, sodass alle essenziellen Systeme betriebsbereit bleiben. Diese praktische Funktion macht die es besonders geeignet für den Einsatz im Freien und in abgelegenen Gebieten, wo eine stabile Stromversorgung unerlässlich ist.GaN-Technologie der 3. GenerationDie Gallium-Nitrid (GaN)-Technologie ist eine fortschrittliche Halbleitertechnologie. GaN-Halbleiter bieten im Vergleich zu herkömmlichen Silizium-Halbleitern mehrere Vorteile, die die Effizienz und Leistungsfähigkeit der NEXA 2000 erheblich steigern.Höhere Effizienz: GaN-Halbleiter haben geringere Leitungsverluste, was zu einer effizienteren Energieumwandlung führt. Dies bedeutet, dass mehr der verfügbaren Energie in nutzbaren Strom umgewandelt wird.Kompaktere Bauweise: Aufgrund ihrer Effizienz können sie kleiner und leichter konstruiert werden, was die Gesamtgröße und das Gewicht der Energiespeicherlösung reduziert.Bessere Wärmeeigenschaften: Sie erzeugen weniger Wärme und können höhere Betriebstemperaturen tolerieren, was die Zuverlässigkeit und Lebensdauer erhöht.Schnellere Schaltzeiten: Die Reaktionszeit und die Fähigkeit zur Anpassung an wechselnde Leistungsanforderungen werden durch schnelleres schalten verbessert.Langlebigkeit und BenutzerfreundlichkeitDas NEXA 2000-System ist auf maximale Langlebigkeit und Zuverlässigkeit ausgelegt und bietet dank der IP66-Wasserdichtigkeitsklasse hervorragenden Schutz vor Wasser und Staub. Er arbeitet effizient selbst bei extremen Temperaturen und unterstützt Kaltstarts bis -20°C, was es ideal für verschiedenste Wohnumgebungen wie Häuser, Balkone, Gärten und Wohnungen macht. Diese Lösung bietet zahlreiche Vorteile gegenüber herkömmlichen Systemen. Der Off-Grid-Port ist mit einer speziellen Schutzabdeckung ausgestattet, die auch bei feuchten und regnerischen Bedingungen sicheren Betrieb garantiert. Durch die All-in-One-Integration entfällt die Notwendigkeit zusätzlicher Mikro-Wechselrichter, wodurch die Installation deutlich vereinfacht und die Systemkomplexität reduziert wird. Außerdem bietet der Speicher weitreichenden Schutz vor:ÜberspannungsschutzÜberstromschutzKurzschlussschutzTemperaturschutzÜberladungsschutzFlexibel ErweiternDer NEXA 2000 bietet eine hohe Flexibilität durch seine modulare Speichererweiterung, die auf bis zu 8192Wh durch 3 weitere Batterien möglich ist. Die Installation und Erweiterung des Systems gestaltet sich einfach und unkompliziert durch das stapelbare Design.Überwachung mit der ShinePhone AppDu kannst für dein System die Monitoring-Plattform nutzen. Diese ist als Smartphone-App (für iOS und Android), als auch in einer Webversion verfügbar. Die Nutzung der Plattform ist kostenfrei. Über Shine können alle Growatt-Produkte, die in Besitz sind, konfiguriert und überwacht werden. Die Anzeige des Eigenverbrauchs und Trends ist ebenfalls möglich.Technische DatenPV-EingangMax. PV-Eingangsleistung: 2600WPV-Eingangsspannungsbereich: 16-60V DCMax. PV-Eingangsspannung: 60V DCAnzahl MPPT`s: 4Anzahl String pro Kanal: 1Max. PV-Eingangsstrom: 20AOn-grid NetzkopplungAC-Nennausgangsleistung: 800WMax. Ausgangsstrom: 3,5ANominale Ausgangsspannung: 230VAC-Frequenz: 50/60HzAC-AnschlussNetzunabhängige AC-Nennausgangsleistung: 800 WMax. Ausgangsstrom: 3,5ANominale Ausgangsspannung: 230VBatterieBatteriechemie: LiFePO4Kapazität: 2048WhNennspannung: 51,2VMax. Ladestrom: 40AMax. Entladestrom: 60AMax. Ladeleistung: 2000WMax. erweiterbare Kapazität: 8192WhAllgemeinTemperaturbereich Laden: 0°C - +55°CTemperaturbereich Entladen: -20°C - +55°CSchutzart: IP66Gewicht: 24 kgAbmessungen: 406 x 255 x 290 mmLieferumfang1x Growatt NEXA 2000 All-in-one Speicher4x PV-Verbindungskabel1x Netzkabel1x Halterung1x MC4-Werkzeug1x Stecker-Abdeckung

The modular concept of the Growatt APX battery system enables a wide range of applications and flexible expansion as required. Between 1 and 6 high-voltage batteries can be installed within a battery tower. The battery module is a high-voltage battery that features the latest LiFePO4 technology and boasts a nominal energy of 5kWh. The body also includes a battery management system of the latest generation, which protects the battery modules from adverse conditions, and a battery base that ensures a secure stand during ground installation. As an option, a back-up box can be added for emergency power generation. It is able to provide up to 10kWh from the solar storage system in the event of a power failure. The APX battery system contains: APX 5.0P-B1 high-voltage battery 5kWh LiFePO4 (1-6x depending on selection)APX 98034-P2 BMS power moduleAPX battery base High-voltage batteryOptional: SYN 50 XH 30 Back-Up Box emergency backup power The APX battery system demonstrates its flexible configuration options. These can be extended from 5kWh to 30kWh. The simple design makes installation and expansion very straightforward with the aid of cables. A further advance of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only the corresponding battery base is required for a secure stand. The APX series supports the combination of mixed battery packs from new and old batches, as well as different capacities. APX 5.0P-B1 high-voltage battery The APX 5.0P-B1 battery module from Growatt is a high-voltage battery with proven lithium iron phosphate storage technology. The LiFePO4 batteries are characterized by a long service life and a high level of safety, even at high power. In addition, the modular energy optimization ensures that the system fully utilizes the energy of each battery. In order to achieve a very flexible system application, old and new battery batches as well as batteries with different capacities can be mixed and connected. Soft start is used to avoid overvoltage in the system. The APX high-voltage battery: Flexible capacity options up to 30kWhCobalt-free LiFePO4 storage technology90% depth of discharge (DoD)Active protection at BMS levelIntegrated modular energy optimizationSupports the combination of new and old battery modules in one systemSoft start to avoid overvoltages in the systemModular and stackable designEasy installation10-year manufacturer's warranty Long cycle life The APX battery system is based on LiFePO4 chemistry without cobalt and offers a four-stage protection mechanism through a battery management system (BMS), modular energy optimization, a fuse and aerosol. This ensures increased safety, reliability and a long service life. The modular energy optimization ensures that the system fully utilizes the energy of each individual battery. Regardless of whether the solar system is grid-connected or stand-alone, Growatt storage offers several advantages over typical lead-acid batteries and other lithium technologies. Soft start to protect the system The soft start mechanism is a protective function that is used with the Growatt battery to protect the system from overvoltage. When the battery is started or switched on, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system. Technical data: Battery type: Lithium iron phosphate (LiFePo4)Nominal voltage: 385VNominal energy: 5kWhOperating voltage range: 330-450VWeight: 50kgDimensions: 690 x 185 x 295 mmProtection class: IP66Ambient temperature: -10°C - +50°CCooling: Natural convectionWarranty: 10 year manufacturer's warranty Battery management system The new Growatt APX 98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. The important thing is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Battery base The Growatt APX Battery Base is suitable for the ground installation of Growatt APX battery modules and the associated BMS. It ensures that the battery tower stands securely. The Growatt APX system has a modular design, i.e. several batteries can be combined, with the Growatt Base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base. for floor mounting of Growatt APX batteries and associated BMSOne base per battery towerDimensions: 690 x 185 x 50 mm SYN 50-XH-30 Back-UP Box The SYN 50-XH-30 from Growatt is a back-up box that acts as an emergency backup power supply for the home. It is able to provide up to 10kW from the solar storage system in the event of a power failure. The switchover time is 0.5 seconds. The Back-Up Box is characterized by its user-friendly design, which makes it easy to install and operate. The SYN Back-Up Box: Backup power supply for the entire house, up to 10 kW100% 3-phase asymmetrical outputIntegrated switchEasy to installCombination options with the entire Growatt MOD-XH BP series Technical data: Max. Overcurrent protection AC input: 63 AMax. Continuous input current: 50 AAC output voltage: 230 V/400 VAC output voltage range: 180-280 VAC frequency: 50/60 HzAC frequency range: 45-65 HzAC rated power: 18 kWMax. continuous input current at 230 V: 26.1 APeak AC power in backup mode: 19.8k WAC peak current in backup mode: 28.7 ACommunication: RS485Operating temperature range: -40°C - +60°CProtection class: IP65Weight: 10.8 kgDimensions: 365 x 450 x 123 mm Compatible inverters The following hybrid inverters are intended for the storage system: MOD 3KTL3-XH BPMOD 4KTL3-XH BP MOD 5KTL3-XH BP MOD6KTL3-XH BPMOD 7KTL3-XH BP MOD 8KTL3-XH BP MOD 9KTL3-XH BP MOD 10KTL3-XH BP

The SYN 50-XH-30 from Growatt is a back-up box that acts as an emergency backup power supply for the house and is able to provide up to 10kW from the solar storage system in the event of a power failure. The switchover time is 0.5 seconds. The Back-Up Box is characterized by a user-friendly design, which enables uncomplicated installation and operation. The SYN Back-Up Box Backup power supply for the entire house, up to 10 kW100% 3-phase asymmetrical outputIntegrated switchEasy to installCan be combined with the entire Growatt MOD-XH BP series Compatibility To achieve off-grid operation of a Growatt MOD-XH BP inverter, the SYN 50-XH-30 can be combined as an option. The following hybrid inverters are intended for this purpose: MOD 3KTL3-XH BP MOD 4KTL3-XH BP MOD 5KTL3-XH BP MOD 6KTL3-XH BP MOD 7KTL3-XH BP MOD 8KTL3-XH BP MOD 9KTL3-XH BP MOD 10KTL3-XH BP The MOD-XH-BP series 2 independent MPPTsBattery-ready, future-proofType II SPD on DC and AC sideIntegrated AFCI functionSupport for export limitationOLED and touch buttonDC/AC ratio up to 2.0Off-grid function possible with optional accessories Hybrid inverter In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the solar system into the grid, but also store it in batteries. This means that the solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before feeding it into the grid. Active safety with AFCI function An Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. In addition to providing protection, it analyzes current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. Colloquially, the AFCI is also known as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. The APX battery system All the inverters mentioned above are compatible with the APX battery system. Thanks to the modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be installed with a minimum of one and a maximum of six APX 5.0P-B1 battery modules. One power module per tower is required for operation, choosing between the APX 98020-P1 or the APX 98034-P2. The BMS must be purchased separately and an additional base is required for floor mounting. Flexible expansion The APX battery system from Growatt demonstrates its flexible configuration options. These can be expanded from 5kWh to 30kWh. The simple and modular design makes installation and expansion very straightforward with the help of cables. Another advantage of the new storage system is that, unlike other systems, a battery cabinet is no longer required. Only a battery base is required for a secure stand. The APX series supports the combination of mixed battery packs from new and old batches, as well as different capacities. Technical data of the Back-Up Box Max. Overcurrent protection AC input: 63 AMax. Continuous input current: 50 AAC output voltage: 230 V/400 VAC output voltage range: 180-280 VAC frequency: 50/60 HzAC frequency range: 45-65 HzAC rated power: 18 kWMax. continuous input current at 230 V: 26.1 APeak AC power in backup mode: 19.8k WAC peak current in backup mode: 28.7 ACommunication: RS485Operating temperature range: -40°C - +60°CProtection class: IP65Weight: 10.8 kgDimensions: 365 x 450 x 123 mm Scope of delivery: 1x Growatt SYN 50-XH-30 Back-Up Box

Die Anker Solarbank 2 E1600 Plus (MPN A17C33Z1) ist ein All-in-One Speicher mit 2 MPP-Trackern und max. 1200W Leistung für dein Balkonkraftwerk. Speichere die Solarenergie im 1600Wh-Akku und versorge dein Zuhause mit 800W AC-Leistung. Die Gerätekombination integriert in seinem schlanken Design sowohl Mikrowechselrichter, PV-Hub als auch Akku in einem. Der modulare Aufbau sorgt für einfache Installation, ohne Bohren oder Kabelsalat. Mit der erweiterbaren Kapazität auf bis zu 9,6 kWh und der Thermal Boosting Technology garantiert sie eine zuverlässige und effiziente Energieversorgung. Sie ermöglicht dir eine jährliche Stromkosteneinsparung von bis zu 231€* und sorgt somit für eine erhebliche Reduzierung deiner Energiekosten. Erlebe die Zukunft der Energiegewinnung mit der Anker Solarbank 2 E1600 Plus und sichere dir eine nachhaltige Energiequelle mit langer Lebensdauer für dein Zuhause. Höchste Flexibilität und Zuverlässigkeit All-in-One Design2 MPP-Tracker<3s ReaktionszeitLeistungsanpassung innerhalb von 10W6000 LadezyklenThermal Boosting TechnologyEnergiemanagement mit der Anker-AppBis zu 231€ Stromkosten sparen*Bis zu 9,6kWh erweiterbar (max. 5 zusätzliche Batterien)Konnektivität: Bluetooth, Wlan10 Jahre Herstellergarantie * Im Vergleich zu einer PV-Anlage ohne Speicher. Berechnet mit 870W Solarleistung, optimaler Modulausrichtung, bestmöglichen Wetterbedingungen, entsprechender Grundlast und 0,40/kWh Strompreis. All-in-One-Design Mit dieser All-in-One-Solarlösung musst du keine zusätzlichen Zubehörteile kaufen oder dich um Kompatibilitätsprobleme sorgen. Dieses System bietet zuverlässige Leistung und ermöglicht dir die unmittelbare Nutzung der erzeugten Energie für deinen Haushalt. Die einzelnen Bestandteile übernehmen dabei entscheidende Funktionen: Der Wechselrichter wandelt den erzeugten Gleichstrom in nutzbaren Wechselstrom um, der Solarladeregler optimiert die Energiezufuhr, während der Akku die gespeicherte Energie jederzeit verfügbar macht. Modular erweiterbar Durch die intelligenten Steuerungssysteme bietet Anker maximale Flexibilität. Mithilfe der Solix Erweiterungsakkus kannst du die Speicherkapazität einfach von 1,6 kWh auf bis zu 9,6 kWh erweitern. Bis zu 5 Speichermodule lassen sich mit einer Solarbank verbinden. Dank des modularen Designs stapelst du die Akkus direkt aufeinander ohne zusätzliche Kabel. Thermal Boosting Technology Die Thermal Boosting Technology ermöglicht durch präzise Echtzeit-Überwachung den Betrieb der Batterie bei bis zu -20°C. Durch die effektive Wärmeableitung sorgt die Technologie außerdem für erhöhte Sicherheit und optimale Lade- und Entladeeffizienz. Dies steigert die Gesamtleistung und verlängert die Lebensdauer der Komponenten. Durch die IP65-Schutzklasse ist die Solarbank wasserdicht und staubfest. Energiemanagement über die Anker-App Mit der zugehörigen Anker App kannst du in Echtzeit die erzeugte Solarenergie und den Stromverbrauch im Haushalt überwachen. Zudem können Einsparungen, sowie CO2-Emissionen berechnet und mit nur einem Fingertipp zwischen vier EMS-Modi gewechselt werden. Technische Daten Akku Akkutyp: LiFePO4Kapazität: 1600WhMax. Erweiterbare Kapazität: 9600WhLebenszyklus: 6000 bis 70%Anzahl der MPPT: 2 Leistungseingang Eingangsport: PV Connector (4 Sätze)Max. Nennleistung des Eingangs (Laden): 2400WMax. MPPT-Eingangsleistung: 1200WMax. PV-Eingangsstrom: 20AMax. PV-Eingangsspannung: 60V Leistungsausgang Ausgabeport: PV ConnectorAC-Ausgangsleistung (Entladen): 800WMax. Backup AC Ausgangsleistung: 1000WAC-Ausgangsstrom: Max. 3,5A, 230VNennleistung AC: 220/230/240VFrequenz: 50/60Hz Allgemein Herstellergarantie: 10 JahreLeistungsgarantie: 15 JahreKonnektivität: Bluetooth. 2.4GHz WLANLade- und Entladetemperatur: -20 ~ +55°CSchutzart: IP65Gewicht: 21,2 kgAbmessungen: 460 x 249 x 254 mm Lieferumfang: 1x Anker SOLIX 2 E1600 PLUS Solarbank 1x Schuko-Ladekabel (5m) 4x Solarpanel-Verlängerungskabel (3m) 1x Installationszubehör 1x Anleitungshandbuch

The new GrowattAPX98034-P2 battery management system (MPN 98034-P2) is a control unit of the latest generation that protects each APX battery module from adverse conditions while ensuring safe and trouble-free continuous operation. It does not matter how many modules are in operation at the same time. What is important is that one BMS is always used per tower. A tower consists of a minimum of 1 to a maximum of 6 Growatt APX 5.0P-B1 5kWh high-voltage battery modules, which can result in a storage capacity of 5-30 kWh. Monitoring parameters SOCSystem voltageSystem currentCell voltageCell temperaturePCBA temperature The APX battery system Thanks to its modular concept, the APX system can be used flexibly and expanded as required. A battery tower can be set up with a minimum of one to a maximum of 6 storage modules. One power module per tower is required for operation. This must be purchased separately. An additional base is required for ground mounting. Technical data: Dimensions: 690 x 185 x 295 mmWeight: 15 kgMax. Current: 30APeak current: 34A, 60sCommunication: RS485/CAN Scope of delivery: 1x Growatt APX 98034-P2 BMS

This Growatt cable set is for SPH inverters and GBLI batteries. A power cable and a communication cable for easy plug-and-play installation of the Growatt GBLI6532 lithium battery and the Growatt SPH 3000 and 3600 inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or give us a call.