This COMPLETE motorhome set with AGM battery - MEDIUM, makes it possible to charge your supply battery via solar while standing, via a charging booster while driving, and even with a shore power socket. It also comes with a 1000W inverter. It therefore covers all your needs when it comes to power supply in a motorhome or camper.

The expected daily output of the two summer modules (April to October) is 1000 Wh/day on average. If the sun doesn't shine for one or more days, or if you want or need to park in the shade, the battery can quickly run out with a purely solar setup. The 30Ah or 400 Wh charge per hour of driving that this set brings with it is a real blessing. You usually arrive at your pitch with a completely full battery and are much less dependent on sunshine. If you are on a campsite for a longer period of time or do not want to move the vehicle for other reasons and the sun does not provide the necessary energy, you simply plug the mains cable into a socket and the battery is charged with 10A or 128 W. The 120Ah or 1440 Wh battery provides enough usable battery capacity to charge an I Phone 60 times, a laptop 10 times or 8 LED spotlights for 140 hours.

A complete connection diagram is included in the NBS30 operating instructions, so even beginners can install the system in just a few hours.

COMPLETE motorhome set with AGM battery - MEDIUM: saves space, weight and money

The special feature of this set for motorhomes and campers is that we use two devices with a dual function. The solar charge controller also functions as a charge booster and the inverter also functions as a charger. This shortens your installation time and saves you space, weight and money.

We use an extra solid mounting system for the solar modules, which can simply be glued on. The module can be unscrewed from the spoiler at any time if you need to access the area under the solar module.

We have also paid particular attention to quality at the critical point, the cable feed-through into the interior of the motorhome. The supplied cable gland is made from the same sturdy material as the roof spoiler for the solar modules and is simply glued on. When fitted correctly, the connection is absolutely watertight and particularly durable.

Noqon and Voltima are Volitmax's own brands and are particularly appreciated by customers for their high quality and durability at an affordable price.

All components of the set are listed and linked below.

You can click on the yellow text to open the products individually and get more detailed information about them.
If you want to change individual components of the set (for example, because the solar modules we have suggested do not fit on your roof), you can simply open all the products listed individually, add them to your shopping cart and then make the adjustments in your shopping cart.

You can also do this if you want to replace individual products that are currently out of stock with items that are in stock. (As soon as only one product of the set is out of stock, the whole set will be displayed as "back soon" or "currently unavailable", even if most of the products are probably in stock)

If you are unsure, you are welcome to contact us. The best way to do this is to send us an email to [email protected].

The components of the set:

VOLTIC VDC120 Deep Cycle AGM 120Ah battery

AGM batteries:
- are particularly inexpensive to purchase
- can easily withstand high continuous discharge currents
- can also be charged at sub-zero temperatures

With 120Ah, the VDC120 delivers a total of approx. 1440 Wh. However, in order to be able to enjoy a particularly large number of battery cycles, it should ideally only be discharged to approx. 50%, which means approx. 700 Wh "usable capacity".
This is enough battery capacity to bridge two to three cloudy days and charge an I Phone 60 times, charge a laptop 10 times or keep 8 LED spotlights lit for 140 hours. You can also operate a small cool box or a 1000W inverter with this battery.

If 700Wh usable battery capacity is not enough for you, you can either choose one of our larger sets with battery or connect two VDC120 in parallel.

If you want to play it safe, you can also install a BatteryProtect to protect your battery from deep discharge.

A charge level indicator can also be useful to adjust your consumption to the charge level of the battery.

If you also want to charge your battery with shore power, you could simply buy an additional charger.

NOQON NSC1012 1000W/12V sine wave inverter with charger, NVS and UPS function

Many laptop chargers, but also other electrical appliances such as induction hobs, hair dryers, microwaves, televisions and kettles are operated with 230V alternating current. An inverter converts the 12V direct current from your battery into 230V alternating current. Make sure that you adapt the selected size of your inverter to the consumption of your electrical appliances.

The NOQON NSC models also combine an inverter and mains charger in one. This is ideal if you plan to stay at a campsite for several days. In this case, the vehicle's engine will no longer supply power and if there is no sun or you are standing in the shade, the battery can quickly run out. Most campsites offer sockets for mains power, which you can then use to charge your battery via the NOQON NSC inverter.

Also very practical: The NSC models have an NVS function. NVS stands for "mains priority switching", which means that the power you draw from the inverter gives priority to your mains power source, thus protecting your battery and allowing it to charge in peace.

NOQON NBS30 solar charge booster with integrated 30A solar charge controller

The NOQON NBS models combine an MPPT solar charge controller and charge booster in one device.
When the vehicle is stationary, a 12V battery can be charged via the solar module with up to 20Ah or approx. 280 Wh charging power. When driving, the NBS30 can even charge up to 30Ah or 420Wh.
For optimum battery charging, the NOQON NBS automatically adjusts the charging characteristic to the required values via the voltage measurement cables. In doing so, it compensates for line losses and voltage fluctuations of the alternator that occur while driving.

• Switchable charging characteristics for optimum charging of lead-gel/dryfit, AGM/fleece or acid/wet batteries as well as LiFePO4 batteries
• Standard protection mechanisms: Overvoltage and undervoltage protection for the main battery, undervoltage protection for the starter battery, overload protection for B2B charging, overheating protection, reverse protection, PV overload protection, PV overvoltage protection
• and much more
• Thin cables (2.5mm2) to tap the "D+" or a "terminal 15" / "ignition on" signal of your vehicle are not included in the set.

VOLTIMA bifacial BSM130-36 solar module 130 watt monocrystalline

Bifacial modules are particularly suitable for mounting on the roofs of motorhomes or camper vans. The angle of incidence of the sun is often lateral in the camper and so the light from the roof can be ideally reflected onto the lower side of the panel. In this way, a good deal of extra power can be extracted from a small space.
Alternatively, you can also mount two normal modules like the GSM130-36 or simply attach a flex panel like the GSM160F-36 with mounting tape.

• The expected daily output (April to October) is on average approx. 500Wh/day per BSM130-36
• Dimensions of the BSM130-36: 1160 x 540 x 30 mm. (For two next to each other you need at least 1160 x 1080 x 30 mm + mounting rails space on the roof)

VOLTIMA 7-piece short complete mounting set for solar installation (white)

Spoiler profiles are the first choice, especially for caravans and motorhomes, when it comes to clean and long-term mounting of solar modules. If the modules are mounted in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). The complete mounting set also includes a cable bushing. When fitted correctly, they are absolutely leak-proof and extremely durable.

Sikaflex 554 (Sika 252i replacement) 300 ml construction adhesive (white)

Correctly applied bonding is superior to any screw connection in tough motorhome or boat applications. A strength of over 4 N/mm2 can be achieved on painted or GRP surfaces, a value that would never be achievable with a screw connection in the thin aluminum or GRP carrier layer - and without any holes in the roof. This adhesive set enables even a layman to create an absolutely firm connection between spoilers and the respective substrate.
If the Sikaflex 554 is not available, we may have the A-J215 L&L MS Polymer Construction Adhesive - white in stock.

Under "Accessories" we have many other useful products that you can use to optimize, supplement or adapt your solar system to your specific needs.

Before ordering:

Climb onto the roof of your camper / caravan / motorhome and measure exactly whether you have enough space on the roof. Remember that you need space for the solar panel AND the spoilers.

Also take into account any objects that may already be on the roof (skylights, fans, antennas, satellite dish, etc.).

Also plan exactly where your cable feed-through is to be placed, where your charge controller is to be installed in the vehicle and where the supply battery will be and how long the extension cable from the solar cells to the charge controller or from the charge controller to the supply battery needs to be. If the 5 meters of solar cable and 1 meter of charge controller cable provided in the set are not long enough, you will have to adjust the set manually.

Installation:

Use the operating instructions for the individual products.

AIS Batterien GmbH accepts no liability whatsoever for application errors, changes or damage to the vehicle that have become necessary as a result of installation, nor if the product has to be dismantled again as a result of a material defect; in such cases, replacement can only be provided for the product itself.