Fine stranded wire made from bare copper wires Core insulation based on PVC You purchase: 1 meter of cable with a cross-section of your choice Colors red, black, blue or green-yellow All ordered quantities are delivered in one piece. Product properties: Flame retardant according to IEC 60332-1-2 Technical data: Approvals: HD 21/VDE 0281 Insulation Specific volume resistance: > 20 GOhm x cm Conductor construction: Fine-stranded according to VDE 0295 Class 5/ IEC 60228 Class 5 Minimum bending radius: According to HD 516 at 20°C ±10°C cable temperature Rated voltage: U0/U: 450/750 V Test voltage: 2500 V Current carrying capacity: VDE 0298 Part 4 Temperature range: Permanently installed: -30°C to +80°C

Cable lugs TYPE A-M are made of electrolytic copper tube (SE-Cu according to DIN 13600). The tube wall thickness guarantees the best electrical conductivity and mechanical protection against vibrations and conductor pull-out. Our cable lugs are annealed to guarantee optimum ductility; this is essential as the cable lugs have to withstand severe deformation during crimping and the usual twisting of the lug during use. The connectors must also ensure reliable contact in the event of oscillations and vibrations. Under these circumstances, hardness plays a decisive role in preventing breaks and cracks. The inspection hole ensures that the conductor is inserted correctly. The sleeve length has been chosen to ensure easy and correct positioning between the crimping inserts during crimping.

Cable lugs TYPE A-M are made of electrolytic copper tube (SE-Cu according to DIN 13600). The tube wall thickness guarantees the best electrical conductivity and mechanical protection against vibrations and conductor pull-out. Our cable lugs are annealed to guarantee optimum ductility; this is essential as the cable lugs have to withstand severe deformation during crimping and the usual twisting of the lug during use. The connectors must also ensure reliable contact in the event of oscillations and vibrations. Under these circumstances, hardness plays a decisive role in preventing breaks and cracks. The inspection hole ensures that the conductor is inserted correctly. The sleeve length has been chosen to ensure easy and correct positioning between the crimping inserts during crimping.