Fine stranded wire made from bare copper wires Core insulation based on PVC You purchase: 1 meter of cable with a cross-section of your choice Colors red, black, blue or green-yellow All ordered quantities are delivered in one piece. Product properties: Flame retardant according to IEC 60332-1-2 Technical data: Approvals: HD 21/VDE 0281 Insulation Specific volume resistance: > 20 GOhm x cm Conductor construction: Fine-stranded according to VDE 0295 Class 5/ IEC 60228 Class 5 Minimum bending radius: According to HD 516 at 20°C ±10°C cable temperature Rated voltage: U0/U: 450/750 V Test voltage: 2500 V Current carrying capacity: VDE 0298 Part 4 Temperature range: Permanently installed: -30°C to +80°C

Cable lugs TYPE A-M are made of electrolytic copper tube (SE-Cu according to DIN 13600). The tube wall thickness guarantees the best electrical conductivity and mechanical protection against vibrations and conductor pull-out. Our cable lugs are annealed to guarantee optimum ductility; this is essential as the cable lugs have to withstand severe deformation during crimping and the usual twisting of the lug during use. The connectors must also ensure reliable contact in the event of oscillations and vibrations. Under these circumstances, hardness plays a decisive role in preventing breaks and cracks. The inspection hole ensures that the conductor is inserted correctly. The sleeve length has been chosen to ensure easy and correct positioning between the crimping inserts during crimping.

NOQON solar charge controller monitor NSM1The NOQON solar charge controller monitor NSM1 can be connected to an MPPT solar charge controller to display the following values: Charging current (A), solar battery voltage (V), solar power (W), solar electricity meter (Ah and WH)Suitable for the following solar charge controllers:- NOQON SCD12 MPPT solar charge controller Dual 12V 165Wp 50V 12A- NOQON SCD25 MPPT solar charge controller Dual 12V 350Wp 50V 25A- NOQON SCN20 MPPT solar charge controller 12V/24V 240Wp/480Wp 50V 20A- NOQON SCN40 MPPT solar charge controller 12V/24V 480Wp/960Wp 50V 40A

NOQON BTS1 Bluetooth dongle The NOQON BTS1 Bluetooth dongle can be connected to an MPPT solar charge controller to display the following values in the app: Charging current (A), solar battery voltage (V), solar power (W), solar electricity meter (Ah and WH) Suitable for the following solar charge controllers: - NOQON SCD12 MPPT solar charge controller Dual 12V 165Wp 50V 12A - NOQON SCD25 MPPT solar charge controller Dual 12V 350Wp 50V 25A - NOQON SCN20 MPPT solar charge controller 12V/24V 240Wp/480Wp 50V 20A - NOQON SCN40 MPPT solar charge controller 12V/24V 480Wp/960Wp 50V 40A

VOLTIMA temperature sensor TS1 The VOLTIMA temperature sensor TS1 can be connected to an MPPT solar charge controller and thus ensures optimized charging of the battery. The temperature sensor also prevents problems with battery degassing. Suitable for the following solar charge controllers: - VOLTIMA SCD12 MPPT solar charge controller Dual 12V 165Wp 50V 12A - VOLTIMA SCD25 MPPT solar charge controller Dual 12V 350Wp 50V 25A - VOLTIMA SCN20 MPPT solar charge controller 12V/24V 240Wp/480Wp 50V 20A - VOLTIMA SCN40 MPPT solar charge controller 12V/24V 480Wp/960Wp 50V 40A

Battery temperature sensor with 3 m connection cable and M8 mounting hole. Potted against environmental influencesSuitable for all VOTRONIC automatic chargers of the Pb and VAC series, VCC charging converters and solar controllers of the SR and MPP series.

Bluetooth Connector S-BC from Votronic The Votronic Energy Monitor consists of a special communication module (Bluetooth Connector S-BC) which, in conjunction with a Votronic solar charge controller (from 2014 serial number (serial number 14Vxx.xxxxx)) with LCD Solar Computer S and/or the LCD Battery Computer S or VPC Jupiter with Smart Shunt, also transmits the values shown on the corresponding display to a mobile device via Bluetooth. The required app for Android or IOS is available free of charge in the Google Play Store or IOS App Store Connecting the Bluetooth Connector S-BC is very easy. It is simply plugged between the Votronic solar charge controller and the LCD Solar Computer S or between the Smart Shunt and the LCD Battery Computer S or VPC Jupiter using the modular cable included in the scope of delivery. The device has 2 inputs and 2 outputs, so that 1 solar controller with LCD solar computer and 1 Smart Shunt with LCD battery computer or VPC Jupiter can be connected together to a communication module. In this way, all the information from the on-board battery, such as voltage, charging and discharging currents and the remaining capacity, as well as all the data from the solar system can be conveniently read via a cell phone or tablet. In addition, the most important data is logged, graphically processed and stored for a longer period of time. It is even possible to output the data as a CSV file for your own analysis purposes. Of course, the Bluetooth Connector S-BC can also be retrofitted at any time. Technical features Connection via Bluetooth 4.0 (2.4Ghz) Range up to 50 outdoors Compatible with Votronic solar controller, VBCS Triple Charger, LCD battery computer and VPC Jupiter Dimensions HxWxD in mm: 75 x 47 x 24 Weight: 37g Test mark: CE, E-test (EMC/vehicle directive) Scope of delivery: Votronic Bluetooth Connector S-BC (MPN 1430), operating instructions, 2 x control cable 6-pin 1m long

Modular cable 6-pin as before but without connectorSuitable for: Battery computer, ammeter, solar display, solar computer, remote controls for Automatic Charger, MobilPOWER Inverter etc.Length: 5 mModular cable 6-pin WITHOUT connector

The Votronic 2088 temperature sensor 625 is functionally identical to the temperature sensor 825, but the 625 is designed for M6 screw terminals. The temperature sensor is supplied with a 3 m connection cable. The sensor is encapsulated and thus optimally protected against environmental influences. Suitable for the following Votronic articles: Automatic chargers of the Pb and VAC seriesVCC series charging convertersSolar controllers of the SR and MPP series Scope of delivery: 1x Votronic 2088 temperature sensor 625 M6

The Solar Data Extender combines the data from up to three solar controllers so that they can be shown on a single display. The familiar LCD display can still be used. It is compatible with the following devices: Solar charge controllers in SR and MPP technology (from serial no. 14Vxx.xxxxx) Battery Charger type VBCS Triple LCD Solar Computer S (from serial no. 15V40.xxxxx) LCD Charge Control S VPC series with solar function Bluetooth Connector S-BC Installation and connection The Solar Data Extender can be retrofitted at any time. It has three independent inputs (IN1, IN2, IN3). The signals are combined and made available via the output (OUT). A solar display (e.g. LCD Solar Computer S) can be connected there. It is connected between the Votronic solar charge controller and the solar display (e.g. LCD Solar Computer S) using the modular cable included in the scope of delivery. The IN1 connection must always be connected, as this is used to supply power to the device. Technical data Data Extender 3 in 1 Nominal voltage (supply via connected devices) 12 and 24 Operating voltage range [V] 8 - 32 Current consumption in standby, typical [mA] 0.7 Current consumption during activity, typical [mA} 10 Dimensions (WxHxD) in [mm] 75 x 47 x 24 Weight in [g] 37 Test mark CE, E-test (EMC/vehicle directive) Ambient conditions, humidity: max. 95% room humidity, non-condensing Scope of delivery: 3 pcs. control cable 6-pin 0.5 m long, operating instructions

The VE.Direct Cable from Victron is required to connect devices that are to communicate with each other via the VE-Direct port. For example, the BlueSolar controllers and the MPPT Control remote control panel. The following connections can be established with it: Victron BlueSolar MPPT controller to Victron Color Control GX panelVictron BlueSolar MPPT controller to MPPT Control remote control unitBMV70xxx series to Color Control GX PanelBMV60xxx series for Color Control GX PanelPhoenix Inverter 12V 24V 48V 250W-500W to Color Control GX Panel The VE.Direct cables are not included with these device series and are available in lengths from 0.3 to 10m. Scope of delivery: 1x Victron VE.Direct Cable

VOLTIMA temperature sensor TS1 The VOLTIMA temperature sensor TS1 can be connected to an MPPT solar charge controller and thus ensures optimized charging of the battery. The temperature sensor also prevents problems with battery degassing. Suitable for the following solar charge controllers: - VOLTIMA SCD12 MPPT solar charge controller Dual 12V 165Wp 50V 12A - VOLTIMA SCD25 MPPT solar charge controller Dual 12V 350Wp 50V 25A - VOLTIMA SCN20 MPPT solar charge controller 12V/24V 240Wp/480Wp 50V 20A - VOLTIMA SCN40 MPPT solar charge controller 12V/24V 480Wp/960Wp 50V 40A

NOQON solar charge controller monitor VSM1 The NOQON solar charge controller monitor NSM1 can be connected to an MPPT solar charge controller to display the following values: Charging current (A), solar battery voltage (V), solar power (W), solar electricity meter (Ah and WH) Suitable for the following solar charge controllers: - NOQON SCD12 MPPT solar charge controller Dual 12V 165Wp 50V 12A - NOQON SCD25 MPPT solar charge controller Dual 12V 350Wp 50V 25A - NOQON SCN20 MPPT solar charge controller 12V/24V 240Wp/480Wp 50V 20A - NOQON SCN40 MPPT solar charge controller 12V/24V 480Wp/960Wp 50V 40A

NOQON BTD1 Bluetooth Dongle Mit dem Bluetooth-Dongle BTD1 von NOQON können Sie jederzeit bequem von Ihrem Smartphone aus den Status Ihres NOQON Solarladereglers oder Ladeboosters überwachen. Durch die Kabellänge von drei Metern sind Sie bei der Montage absolut flexibel und können das kleine Modul genau dort montieren, wo es unauffällig seinen Dienst verrichtet und gleichzeitig besten Empfang bzw. Sendeleistung bietet. Die integrierte LED signalisiert jederzeit, ob die Verbindung zu Ihrem Smartphone erfolgreich ist (dauerhaftes Leuchten) oder ob aktuell keine Verbindung besteht (blinkende LED). Die Reichweite des Bluetooth Signals beträgt bis zu 10 Metern und ist abhängig von den Umgebungsbedingungen. Beachten Sie bitte bei der Montage, dass Objekte, Wände oder Verkleidungen aus Metall das Signal abschirmen und abschwächen können. Das Bluetooth-Modul BTD1 ist mit folgenden NOQON-Produkten kompatibel: NOQON Ladebooster: NB30, NB60, NBS30 und NBS60NOQON MPPT Solarladeregler : SCN20, SCN40, SCD12, SCD25

Cable lugs TYPE A-M are made of electrolytic copper tube (SE-Cu according to DIN 13600). The tube wall thickness guarantees the best electrical conductivity and mechanical protection against vibrations and conductor pull-out. Our cable lugs are annealed to guarantee optimum ductility; this is essential as the cable lugs have to withstand severe deformation during crimping and the usual twisting of the lug during use. The connectors must also ensure reliable contact in the event of oscillations and vibrations. Under these circumstances, hardness plays a decisive role in preventing breaks and cracks. The inspection hole ensures that the conductor is inserted correctly. The sleeve length has been chosen to ensure easy and correct positioning between the crimping inserts during crimping.

Batteriekabel-Satz für Laderegler 1,5m mit Inline-Sicherung M8/Aderendhülse