The LCD Charge Control S is a convenient, easy-to-use control and operating element that displays the status of the individual charging sources, the current charging phase, the voltage of the on-board and starter battery and the current charging current. In solar mode, the displays for the current solar power (W) and the energy counters (Wh and Ah, can be reset to "zero" at any time) are also available for your own statistical purposes. With the VBCS or VAC Triple, the mains charging mode can be switched on or off manually or reduced in terms of power (AC power limit) at the touch of a button, e.g. if the shore power is too weak. A special protective function ensures that an inadvertently switched off mains charge is reactivated if the on-board battery is in danger of being deeply discharged. The large, clear display has an illuminated and easy-to-read display with very low power consumption. The plug and play connection means it can be easily retrofitted at any time, even retrospectively, and its compact design means it can be installed in almost any location. The product has the following features: Compatible with VOTRONIC VBCS chargersLarge, clear displayBright, white illuminated displayDisplay of the active charging source mains/charging converter/solarControl of the mains charging function, AC power limit Display of battery charging phasesVoltage and charging current displaysSolar computer function

Battery temperature sensor with 3 m connection cable and M8 mounting hole. Potted against environmental influencesSuitable for all VOTRONIC automatic chargers of the Pb and VAC series, VCC charging converters and solar controllers of the SR and MPP series.

Votronic remote control S suitable for automatic chargers of the Pb and VAC series. If the device is difficult to access, the control LEDs provide a remote display of the device status and charging progress. One of the respective main device functions can be remote-controlled with the switch, e.g. silent run (night mode) for chargers in the Pb and VAC series. The remote control is designed as a panel version and matches the other displays of the VOTRONIC module system both visually and mechanically (same height 85 mm). Product details Automatic loaders Pb series Automatic loaders VAC series Made in Germany Technical data Dimensions 85x47mm Installation dimensions 65x35 (max. depth 16 mm) Weight 23g Test mark CE, E-test (EMC/vehicle directive) Scope of delivery Connection cable 5m long, ready to plug in on both sides for device connection, fixing screws, drilling template

Modular cable 6-pin as before but without connectorSuitable for: Battery computer, ammeter, solar display, solar computer, remote controls for Automatic Charger, MobilPOWER Inverter etc.Length: 5 mModular cable 6-pin WITHOUT connector

The Votronic 2088 temperature sensor 625 is functionally identical to the temperature sensor 825, but the 625 is designed for M6 screw terminals. The temperature sensor is supplied with a 3 m connection cable. The sensor is encapsulated and thus optimally protected against environmental influences. Suitable for the following Votronic articles: Automatic chargers of the Pb and VAC seriesVCC series charging convertersSolar controllers of the SR and MPP series Scope of delivery: 1x Votronic 2088 temperature sensor 625 M6

Suitable for all automatic chargers in the Pb and VAC series. The single-color green LED indicates the operational readiness of the charger and the mains/power supply. The remote indicator can be mounted at any desired location (both in a clearly visible position in the interior such as the dashboard or similar, as well as in the exterior, e.g. near the driver's door or similar) via an 8 mm hole. An associated sealing ring ensures IP67 tightness. The plug-in 5 m long connection cable ensures direct connection of the electronic unit to chargers from the Pb, VAC, VAC-F, VAC-F II and VAC-Duo series. Scope of delivery: 0.4 m long red/black connecting leads Connection adapter Connection cable 5m long, ready to plug in on both sides for device connection sealing ring union nut

The LCD Charge Control S is a convenient, easy-to-use control and operating element that displays the status of the individual charging sources, the current charging phase, the voltage of the on-board and starter battery and the current charging current. In solar mode, the displays for the current solar power (W) and the energy counters (Wh and Ah, can be reset to "zero" at any time) are also available for your own statistical purposes. With the VBCS or VAC Triple, the mains charging mode can be switched on or off manually or reduced in terms of power (AC power limit) at the touch of a button, e.g. if the shore power is too weak. A special protective function ensures that an inadvertently switched off mains charge is reactivated if the on-board battery is in danger of being deeply discharged. The large, clear display has an illuminated and easy-to-read display with very low power consumption. The plug and play connection means it can be easily retrofitted at any time, even retrospectively, and its compact design means it can be installed in almost any location. The product has the following features: Compatible with VOTRONIC VBCS chargersLarge, clear displayBright, white illuminated displayDisplay of the active charging source mains/charging converter/solarControl of the mains charging function, AC power limit Display of battery charging phasesVoltage and charging current displaysSolar computer function