A practical quick connector for batteries that are difficult to reach or concealed. The eyelet terminals are fitted to the battery, making connection child's play without the operator having to actually reach the battery. Comfort Connect eyelets are available in three different sizes for different battery terminal sizes. Checks the charging status of hard-to-reach batteries, M8 8.4 mm eyelet The indicator makes it easy to monitor the battery charge status. The exact battery result is displayed two hours after the vehicle has been parked. Functions Red: The battery voltage is below 12.4 V. It is definitely time to recharge the battery. Yellow: The battery voltage is between 12.4 and 12.65 V. It is time to recharge the battery. Green: The battery voltage is above 12.65 V. OK! No need to charge.

A practical quick connector for batteries that are difficult to reach or hidden away. The eyelet terminals are fitted to the battery, making it very easy to connect without the operator having to actually reach the battery. Cable with M6 6.4 mm eyelet for quick and easy connection without clamps Functions Eyelet terminal M6 6.4 mm

Test winner of the charger comparison test of Autobild (issue 43/2010). Ctek battery charger suitable for all types of 12V lead-acid batteries (wet, maintenance-free, AGM, calcium/calcium and gel batteries) The MXS 5.0 is a charger equipped with the latest technology, which was previously reserved for CTEK professional devices. The charger solves a range of battery problems; it is the perfect charger for users with the highest demands. The MXS 5.0 offers a range of features, such as battery diagnostics that indicate whether the battery can accept and hold a charge, a special reconditioning function that recovers deeply discharged batteries with acid stratification, a unique maintenance charging function, a mode for optimized charging on cold winter days and the ability to charge demanding AGM batteries (i.e. Optima). The unique display allows the user to follow the entire charging process. The MXS 5.0 is a fully automatic 8-stage charger with a selectable charging current between 0.8 A and 5 A for 12V batteries from 1.2 - 110Ah and for maintenance charging up to 160Ah. The charger has protection class IP65 (protected against dust and splash water), was built to protect vehicle electronics systems, is protected against sparks, reverse polarity and short circuits. Details: Desulphation Perfect charge and charge retention Unique regeneration of deeply discharged batteries CTEK's 8-stage now visible via LED display Electronics safe Splashproof and dustproof (IP 65) Pulse charge retention GS tested

A practical quick connector for batteries that are difficult to reach or hidden away. The eyelet terminals are fitted to the battery, making connection child's play without the operator having to actually reach the battery. Comfort Connect - Eyelet are available in three different sizes for different battery terminal sizes. Eyelet: M10 (10.4 mm) Cable length for all models: 40 cm Cable with M8 8.4 mm eyelet for quick and easy connection without clamps Functions Eyelet clamp M8 8.4 mm

Practical clamp for your CTEK charger

Perfectly suited for cars, motorcycles, boats, lawnmowers, jet skis, etc. It can remain permanently connected and is therefore always able to indicate when the battery needs recharging.

In order to deliver maximum performance, your powersport vehicle must be in the best possible condition. Powersport vehicles are often not used for long periods of time. The CT5 POWERSPORT ensures that your powersport vehicle is always ready for use by providing its battery with a trickle charge. The CT5 POWERSPORT has been specially developed for charging and maintaining Powersport batteries and, thanks to its advanced technology, offers three fully automatic charging and maintenance programs. Normal: Suitable for all types of lead-acid batteries, including AGM, lithium*: For lithium* batteries and reconditioning. If required, it can be connected directly and indefinitely to the battery, ensuring that the battery is neither overcharged nor undercharged. The charger is easy to use and supports all types of Powersport batteries with a working voltage of 12 V. *) 12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP) Functions Practical and easy to use Testing and restoring the battery capacity output current: max. 2.3 A non-sparking reverse polarity protected short-circuit proof

Power management system for starter batteries and secondary batteries Smartpass 120S is a 120 A energy management system that distributes, controls and maximizes the energy provided by the alternator to supply the service batteries and end devices. SMARTPASS 120S is suitable for all 12 V batteries between 28 Ah and 800 Ah. The battery monitor function of the Smartpass 120S prioritizes important devices such as radio, emergency lighting and navigation systems by supplying them with priority power, while non-critical consumers are switched off when the service battery voltage is low. The device's battery monitor protects your service battery from deep discharge, and the integrated overtemperature protection reduces the charging current before the battery temperature rises too high. SMARTPASS 120S is compatible with the D250SA and D250SE on-board chargers. Functions Battery disconnect function eliminates the need for diodes and VSR relays Fully automatic Maximizes the service life of the battery Battery monitor to protect the secondary battery from deep discharge Dynamic overcurrent protection enables short-term currents of up to 350 A for fast charging Battery temperature protection for additional safety Splash-proof and dust-proof (IP65)

CTEK Comfort Connect extension cable 2.5m Extension Extends the possible distance from the charger to the vehicle or enables the socket to be moved to a more practical location for charging (e.g. in the cockpit).

The Comfort M8 connector is designed for mounting on the battery with eyelets - Eyelet diameter 8.4 mm - Cable length 0.55 m - Illuminated microdiodes indicate three levels of battery status - 15 A fuse

Cable for checking the battery status via a 12-volt socket INDICATOR CIG PLUG is a combination of quick connector and indicator for easy charging. Perfect for checking the charge status and charging the battery via the vehicle's 12V socket. Suitable for all 12 V chargers from CTEK up to 8 A. INDICATOR CIG PLUG is a universal device for 12 and 21 mm sockets. Note: The socket must be supplied with power even if the ignition switch is in the "off" position. Functions Red: The battery voltage is below 12.4 V. It is definitely time to recharge the battery. Yellow: The battery voltage is between 12.4 and 12.65 V. It is time to recharge the battery. Green: The battery voltage is above 12.65 V. OK! No need to charge.

Tests the voltage, starting power and performance of the alternator The MXS 5.0 TEST & CHARGE is designed for batteries between 1.2 Ah and 110 Ah. The test function includes three easy-to-use programs for testing battery voltage, starting power and alternator performance, providing a complete picture of the battery state of charge and system health of the vehicle charging system. In addition, the MXS 5.0 TEST & CHARGE features a patented automatic desulphation program and CTEK's patented Float/Pulse system. This is the most efficient trickle charge mode when a battery is left connected to the charger for an extended period of time. Functions Charging of batteries between 1.2 Ah and 110 Ah Patented float/pulse trickle charge Easy to read LED display splash-proof and dust-proof (IP65) non-sparking reverse polarity protected short-circuit proof

M6 eyelets and display panel for checking the battery status Functions Red: The battery voltage is below 12.4 V. It is definitely time to recharge the battery. Yellow: The battery voltage is between 12.4 and 12.65 V. It is time to recharge the battery. Green: The battery voltage is above 12.65 V. OK! No need to charge.

The XS 0.8 is the smallest 12V charger from CTEK. It is equipped with the latest technology and is perfect for charging smaller 12V batteries, such as those found in motorcycles, jet skis, quads and lawnmowers. It is also suitable for maintenance charging of "normal" sized batteries, such as car batteries. The unique display allows the user to follow the entire charging process. The XS 0.8 is a compact, fully automatic 6-stage charger for 12V batteries from 1.2 - 32Ah and for maintenance charging of up to 100Ah. The XS 0.8 has protection class IP 65 (protected against dust and splash water), delivers 0.8A and protects the vehicle electronics. It is protected against sparks, reverse polarity and short circuits. The XS 0.8 is supplied with a 5-year guarantee.

For heavy-duty vehicles The D250TS is a fast, fully automatic 4-stage DC/DC battery charger with disconnect function for vehicles with dual 24 V battery banks. The D250TS is ideal for buses, commercial vehicles, motorhomes and boats. It delivers 10 A for 24 V batteries between 28 Ah and 200 Ah and has a 12 V output for supplying the starter battery and connected 12 V consumers. The D250TS complies with protection class IP65 for outdoor use and is suitable for all types of lead-acid batteries, including maintenance-free, liquid, EFB, Ca/Ca, AGM and gel batteries. With the D250TS, you can rest assured that your batteries will always receive the optimum charging voltage. Features Quick installation at lower cost Automatically adapts to any connected power source Automatic battery equalization of 24 V systems Input voltage: 14-30 V DC Output: 28.8 V/10 A, 14.4 V/10 A

Charging batteries for cars and vans in the professional workshop The MXS 10EC is a fully automatic, intelligent 8-stage charger designed for professional use. This makes it perfect for workshops. It charges 12 V batteries (including AGM) between 20 Ah and 200 Ah with up to 10 A and provides trickle charging for batteries up to 300 Ah. The MXS 10EC has a wide range of functions, including battery diagnostics to determine whether the battery can accept and hold a charge, a recond mode for reconditioning deeply discharged batteries in which acid layers have formed, and a temperature sensor to optimize the charging process in cold environments. In addition, the device can be used as a power supply source. The MXS 10EC is easy to transport and is supplied with a robust bumper made of protective silicone rubber and a 4 m extension cable. Functions Fully automatic, 8-stage "connect and forget" charging process Charging of batteries up to 300 Ah Easy-to-read LED display splash-proof and dust-proof (IP65) non-sparking reverse polarity protected short-circuit proof

CTEK Comfort Connect Cig Plug cigarette lighter cable

Supplying devices and accessories with power via the battery CONNECT CIG SOCKET is a useful accessory for extending the range of applications of the CTEK CONNECT battery connection. After connecting CONNECT CIG SOCKET, you can operate navigation systems, cell phones, grip heaters, heated clothing, etc. 1 m cable length. Functions CTEK quick connectors may only be used with CTEK 12 V chargers in the 0.8-10 A range CONNECT and INDICATOR accessories are not suitable for CTEK models with white plastic connectors. Please use the quick connectors labeled Extra Cord Set for these models.

Durable silicone rubber protection for chargers with 0.8 A Suitable for use with all CTEK chargers with 0.8A.

CTEK MXT 14 battery charger The MXT 14 is a 24V charger that has been developed for high-performance vehicles such as trucks, buses and commercial vehicle workshops. As a fully automatic 8-stage charger with a charging current of 14A, it is suitable for 24V batteries from 28-300Ah as well as for maintenance charging of up to 500Ah. The MXT 14 is also suitable for outdoor use (protection class IP44). RECOND: Special mode in which deeply discharged batteries are revived and restored to full capacitySUPPLY: Special mode in which the device can be used as a power supply unit for the equipment when the battery is removed (radio code)

Durable silicone rubber protection for chargers with 3.8 to 5 A Suitable for use with all CTEK chargers with 3.8-5.0 A.

Robust clamps for quick connection to the battery, shows the battery status. INDICATOR CLAMP uses simple traffic light symbols to indicate the charge status of your battery. Easy to switch between vehicles - ideal for workshops and showrooms. When charging is required, the cap can be removed from the device and a compatible CTEK charger plugged in to fully recharge the battery. Cable length 1.5 m. Functions Red: The battery voltage is below 12.4 V. It is definitely time to recharge the battery. Yellow: The battery voltage is between 12.4 and 12.65 V. It is time to recharge the battery. Green: The battery voltage is above 12.65 V. OK! No need to charge.

Ctek MXTS70, the ultimate charger for professionals! The MXTS 70 is a fully automatic 8-stage charger with a selectable charging current between 70 A/12 V and 35 A/24 V for 12 V batteries from 50 to 1000 Ah and 24 V batteries from 25 to 500 Ah. It is equipped with a high-strength aluminum housing for difficult working environments and protects vehicle electronics systems. It is protected against sparks, reverse polarity and short circuits and is equipped with all the features and functions required for professional battery care. Features: Supply mode (power supply function) Regeneration mode Temperature compensated Electronics safe Pulse charge retention Control panel with LED displays Selectable voltage range and amperage Display Detachable cable with heavy-duty clamps Cable length/Ø: approx. 5 m / 16 mm² Temperature compensated Fully automatic charging cycle with adjustable parameters.

Automatic charging of lithium-ion batteries (12 V LiFePO₄) The LITHIUM XS is specially designed for lithium batteries (12V LiFePO4). It can charge LiFePO4 batteries between 5 Ah and 60 Ah with a charging current of up to 5 A and trickle charge LiFePO4 batteries up to 120 Ah. The device is easy to operate: simply plug it in and the charging process begins. The battery does not need to be disconnected for charging and any low-voltage protection electronics are automatically reset. The LITHIUM XS is a "connect and forget" charger with 8 charging stages. These include a test mode that determines whether the battery can accept and hold the charge, a unique optimization mode to restore full capacity and a patented trickle charge mode for maximum performance even after months of inactivity. Functions reverse polarity protected splash-proof and dust-proof (IP65)