Votronic 2112 Pictogram film black, self-adhesive

The Votronic switch panel 4S 12/24 (MPN 1288) for 12V & 24V systems has been specially developed for use in motorhomes. This panel is equipped with four separate ON/OFF switches with which you can activate or deactivate different consumer groups individually. Each switch has its own indicator LED and a maximum load of 8A. Switch panel 4 S 4 ON/OFF switches, each with a load capacity of 8A, with indicator LEDConnection via screw terminalsThe connections are designed for cable cross-sections up to 4 mm²The VOTRONIC switch panel 4S 12/24 is suitable for both 12 V and 24 V Scope of delivery: 1x Votronic 1288 switch panel 4S 12/24

Votronic Ladestecker (2323) – 2-polig nach DIN 14690 (C-Stecker) Der Votronic Ladestecker (MPN 2323) ist ein hochwertiger 2-poliger C-Stecker, der exakt nach der Norm DIN 14690 gefertigt wurde. Dank seiner integrierten Leitungstülle bietet er eine sichere Kabelführung und ist speziell für den anspruchsvollen Einsatz in Rettungs- und Feuerwehrfahrzeugen konzipiert. Dieser Stecker zeichnet sich durch seine hervorragende Eignung für bewegliche Anschlüsse wie Automatik-Kabelaufroller oder Spiralkabel aus. Er gewährleistet eine mechanisch belastbare und elektrisch sichere Verbindung, die den strengen Standards für Einsatzfahrzeuge entspricht und eine verlustfreie Stromübertragung sicherstellt. Lieferumfang: 1x Votronic 2323 Ladestecker nach DIN 14690 (C-Stecker)

The Votronic switch panel 2 x 16 A S (MPN 1291) for 12V and 24V systems has been specially developed for use in motorhomes. The integrated individual switches can be used to switch connected consumer groups on or off separately. The switches can each be loaded with 2x 8A or 1x 16A. Important product features: 2 individual switches 2xUM with flat plug connection Load capacity: max. 2x 8A or 1x 16A Suitable for 12V and 24V systemsDimensions: 47 x 85 x 25 mm The switch panel 2 x 16 A is part of the Votronic switch and fuse panel series which, in addition to panels for switches, main switches and fuses, also includes a USB port panel and a socket outlet panel with the same look. Scope of delivery: 1x Votronic 1291 switch panel 2x 16A 12V/24V

The Votronic socket outlet panel S (MPN 1293) was specially developed for use in motorhomes. This panel enables the connection of 12V consumers with a maximum consumption of 8A via a cigarette lighter plug or adapter. The panel itself is connected using the flat plugs supplied. Important product features: Connection of 12V consumers via DIN plug (ISO 4165) Maximum current 8A Connection of the panel via blade terminals Dimensions 47x85x65mm The socket outlet panel for installation in motorhomes is just one part of a whole series of coordinated panels. In addition to the socket outlet, the Votronic switch and fuse panel series also offers panels for switches, main switches and fuses as well as a USB port. An internationally understandable labeling sheet is available for labeling the panel. The pictogram foil is self-adhesive, abrasion-resistant and corresponds to the Votronic front panel design in terms of size and font. Scope of delivery: 1x Votronic 1293 socket outlet installation panel

The Votronic Info Panel Pro (MPN 5330) for 12V systems is a convenient display and control panel and has been specially developed for use in motorhomes. It takes over the most important control and switching tasks and offers direct monitoring of fresh water, waste water and waste tanks, as well as the on-board and starter battery. It is also equipped with a main battery switch and a main pump switch for the fresh water supply.On the left-hand side, several LEDs indicate the current battery voltage in a range from 10.5V to 15.0V. If the voltage is too low, this is signaled by red LEDs. At the touch of a button, you can switch between the voltage display of the on-board and starter battery or deactivate the display.There are two further displays on the Info Panel Pro for monitoring tanks, which are represented by light bars with 10 LEDs each. The displays work continuously, as intermediate levels are displayed with variable brightness and trends can therefore be recognized immediately. This gives you a complete overview of all filling and emptying processes. The display can be switched on and off at the touch of a button and switches off again automatically after approx. 10 minutes. The tank display on the right-hand side of the Info Panel Pro can also be switched to two measuring inputs (e.g. waste water and waste tank) as standard.The Info Panel Pro is equipped with integrated protection against reverse polarity and overload. The labeled connections for 6.3 mm flat plugs (power connections) and screw terminals (signal connections) are located on the rear.To make installation easier for you, you also receive a drilling template with the Info Panel Pro. Thanks to the low installation depth of just 15 mm, the device can be installed almost anywhere.Scope of delivery:1v Votronic Info Panel Pro 5330, operating instructions

The Votronic switch panel 16A S (MPN 1289) for 12V and 24V systems has been specially developed for use in motorhomes. With the integrated individual switch, connected consumer groups can be easily switched on or off. The switch can be loaded with 2x 8A or 1x 16A. Important product features: Single switch 2xUM with flat plug connectionLoad capacity: max. 2x 8A or 1x 16ASuitable for 12V and 24V systems The 16 A switch panel is part of the Votronic switch and fuse panel series which, in addition to panels for switches, main switches and fuses, also includes a USB port panel and a socket outlet panel in the same design. An internationally understandable labeling sheet is available for labeling the panel. The pictogram foil is self-adhesive, abrasion-resistant and corresponds to the Votronic front panel design in terms of size and font. Scope of delivery: 1x Votronic 1289 single switch panel 16A S 12V

The Votronic main switch panel 20A S (MPN 1295) was specially developed for use in motorhomes. This panel serves as a main switch for connected consumers or consumer groups. It has a 20A overcurrent switch which is automatically reset to the 0 position if the continuous current exceeds 20A (thermal tripping). Important product features: Main switch with 20A overcurrent switch Thermally triggered overload protection ensures safety on board, can be overloaded for a short time tripping at more than 20A continuous current with return of the switch to the 0 position Suitable for 12V and 24V systems Quality made in Germany The Votronic main switch panel with 20A switching capacity and a smart look is designed for installation in motorhomes. It is just one part of a whole series of coordinated panels. In addition to the main switch, the Votronic switch and fuse panel series also offers panels for switches, main switches and fuses, as well as a socket outlet panel. An internationally understandable labeling sheet is available for labeling the panel. The pictogram foil is self-adhesive, abrasion-resistant and corresponds to the Votronic front panel design in terms of size and font. Scope of delivery: 1x Votronic 1295 main switch panel 20A S 12V 24V with thermal fuse

Fuse panels for on-board electrics Switch electrical devices and fuse circuits, individually configure them according to your requirements and label them clearly. These are the features of these control and switching devices. Equipped with automatic circuit breakers, the tiresome search for the right replacement fuse is a thing of the past. They are ready for use again at the touch of a button. Panels with a uniform height of 85 mm are offered to match the VOTRONIC modular system and can be used as individual devices or in combination. The wide range of possible applications allows the user to put together a complete information and control center. Fuse panel 4 S Circuit breakers 6A, 8A, 10A, pre-wired to the group 1 circuit breaker 12A, individually switchable Suitable for 12V and 24V Connection via flat plug Optical tripping control Scope of delivery: 1x Votronic 1285 fuse panel 4 S

The VCC 1212-45 IUoU-Li from Votronic (3308 ) is a fully automatic, galvanically isolated battery charging converter for special vehicles, high-quality motorhomes and boats. The charging converter (also "charging booster") of the "VCC" series has been developed according to the latest specifications for the mobile charging of supply batteries (living area/on-board batteries) from the alternator (starter battery) while driving. The device also ensures a complete IU1oU2 charging characteristic curve while driving. The maximum charging current of the VCC 1212-45 is 45A and it can work with lead-acid, gel, AGM1, AGM2 and LiFePO4 batteries. In contrast to conventional cut-off relays, the charging voltage is lowered or raised according to the charging program specification, making the device particularly suitable for EURO standard 6, 6 + plus vehicles. Universally applicable all-rounder For on-board batteries in classic lead-acid, lead-gel or lead-AGM as well as modern lithium-LiFePO4 technology, the 8 selectable charging programs guarantee a monitoring-free, fast and gentle full charge from any state of charge with subsequent full maintenance and care of the battery. Even on short journeys, the battery is charged with full charging current. Connected 12 V consumers are automatically supplied with power, even if the on-board power supply is heavily loaded. The automatic power control ensures the necessary safety and starting capability of the vehicle. Important features of the Votronic 3308 VCC1212-45 IUoU-Li The VCC 1212-45 is a B2B charger with galvanic isolation for charging 12V batteries from a 12V alternator/battery. max. charging current: 45A, input voltage range 12V, charges 12V batteries, recommended battery capacity: 90 - 400 Ah Increases or decreases the voltage to the required level in order to charge the on-board battery precisely with the optimum charging characteristic. It fully compensates for line losses and voltage fluctuations in the alternator, such as those that constantly occur to a considerable extent in Euro 6 vehicles (intelligent alternators). Characterized by compact design, low weight (high-frequency switch mode technology) and powerfully dimensioned power components for safe operation. Significantly better energy balance of the on-board battery. No intervention in the starter circuit; the device behaves like a powerful consumer on the alternator. The supplied 12 V consumers are protected against overvoltage and voltage fluctuations. The charging voltage is free of peaks and regulated in such a way that the batteries cannot be overcharged. Fully automatic operation: The device is permanently connected to the batteries and is automatically activated by the vehicle's running alternator. The batteries are not discharged when the engine is not running. Parallel and buffer operation: The battery continues to be charged or is kept fully charged during simultaneous consumption. The device automatically calculates and monitors the adjustment of the charging times. Monitoring-free charging: Multiple protection against overload, overheating, overvoltage, short circuit, malfunction and battery back-discharge through electronic cut-off up to complete disconnection of device and battery. Built-in on-board filter: Problem-free parallel operation with other charging sources (EBL, chargers, engine and fuel generators, solar systems) on one battery. Charging cable compensation: Voltage losses on the charging cables are automatically compensated for. Connection for battery temperature sensor (sensor included in scope of delivery). For lead batteries (acid, gel, AGM), the charging voltage is automatically adjusted to the battery temperature. This results in a better full charge of the weaker battery in cold weather and avoids unnecessary battery gassing in summer temperatures. LiFePO4 batteries: Battery protection at high temperatures and, in particular, adapted charging at low temperatures below 0 °C. Charging aid for deeply discharged lead batteries: Gentle pre-charging of the (lead-acid, -gel, AGM) battery up to 8 V, then powerful support for the battery if consumers are still switched on. Also ensures the automatic activation of a LiFePO4 battery that has been switched off by the BMS. What added value does the use of a B2B charging converter offer me? The charging converters ensure optimum and fast charging of the supply battery from the alternator while driving. In contrast to a simple cut-off relay, the charging voltage is raised to the value required for the respective battery type for a full charge and demanded by the battery manufacturers. This means that the full charging current can flow and a considerable amount of current can be charged into the battery in a short time. Long charging cables and losses as well as voltage fluctuations at the alternator are neatly compensated for. Charging converters with different input and output voltages (12V/24V or 24V/12V) make it easy to charge a second battery without installing a second alternator. The charging converters thus provide the well-known high quality of battery charging of the VOTRONIC chargers even while driving. The intelligent microprocessor charging control with "IU1oU2oU3" charging characteristics and dynamic charging time calculation automatically ensures fast and gentle full charging and subsequent charge retention of the connected batteries from any state of charge and always enables simultaneous supply of consumers in parallel with the supply battery. Scope of delivery: 1X Votronic 3308 VCC 1212-45 IUoU-Li battery to battery charging converter 1x operating instructions (German) 1x temperature sensor