Votronic 2072 Switch Unit 100 12V/24V Batterie Hauptschalter

With the main switch / battery selector switch, two batteries can be switched on and off simultaneously and controlled separately to reduce power consumption when the device, vehicle or boat is not in use. The switch is suitable for automotive electronics, electrical products and all types of 12V/24V/36V vehicles, boats, motorhomes, etc.The practical rotary switch is very easy to operate and works smoothly. With switch position 1 or 2 one of the connected batteries can be switched on, with 1 & 2 both are connected to the circuit and OFF (red) means both batteries are switched off. When the device or vehicle is not in use, the switch can be used to safely disconnect the connection between the battery and the electrical product, thus reducing energy consumption. Features Suitable for 6V/12V/24V/36V Continuous current 12V DC: 175A Intermittent current 12V DC: 300A Maximum current (short-term): 1000A Weight: 260g Selector switch dimensions: 134 x 134 x 77mm Connection terminal: M5 Guard and locking service The switch can be used as an independent unit or in parallel with other switches. It can effectively protect the power supply, reduce battery loss and extend battery life. The switch is non-removable. Durable material The selector switch is made of CE-certified, high-quality ABS flame-retardant reinforced nylon and silver-plated red copper bolts. It is resistant to moisture, UV and ageing and has a long service life. The rear cover is insulated to prevent short circuits, meet safety requirements and effectively prevent electrical accidents. Easy installation The battery selector switch can be installed quickly and easily. Pay attention to the arrangement of the positive and negative wires, then install the corresponding lining plate and tighten the four screws to prevent the cable connector from being exposed to the air and oxidized.

Battery switch / battery isolator 6V- 24V 100A Natoknochen

With the main switch / battery selector switch, two batteries can be switched on and off simultaneously and controlled separately to reduce power consumption when the device, vehicle or boat is not in use. The switch is suitable for automotive electronics, electrical products and all types of 12V/24V/36V vehicles, boats, motorhomes, etc.The practical rotary switch is very easy to operate and works smoothly. With switch position 1 or 2 one of the connected batteries can be switched on, with 1 & 2 both are connected to the circuit and OFF (red) means both batteries are switched off. When the device or vehicle is not in use, the switch can be used to safely disconnect the connection between the battery and the electrical product, thus reducing energy consumption. Features Suitable for 12V/24V/36VContinuous current 12V DC: 200AIntermittent current 12V DC: 300AMaximum current (short-term): 1000AWeight: 260gSelector switch dimensions: 69 x 69 x 74mmDimensions for the 4 removable cable glands: 45 x 20mmConnection terminal: M8 Guard and locking service The switch can be used as an independent unit or in parallel with other switches. It can effectively protect the power supply, reduce battery loss and extend battery life. The switch is non-removable. Durable material The selector switch is made of CE-certified, high-quality ABS flame-retardant reinforced nylon and silver-plated red copper bolts. It is resistant to moisture, UV and ageing and has a long service life. The rear cover is insulated to prevent short circuits, meet safety requirements and effectively prevent electrical accidents. Easy installation The battery selector switch can be installed quickly and easily. Attention must be paid to the arrangement of the positive and negative wires, then install the corresponding lining plate and tighten the four screws to prevent the cable connector from being exposed to the air and oxidized. Scope of delivery: 1x battery switch4x removable side plate1x base plate4x screw4x nut

Battery disconnector 6 V, 12 V, 24 V The battery isolating switch is suitable for preventing short circuits and unwanted battery discharge. The battery disconnector is connected to the negative terminal. Advantages: Max. Max. load capacity: 100 A Operating voltage: 6 Volt/ 12 Volt/ 24 Volt Size (LxWxH): approx. 8.5 x 3.5 x 3.5 cm Single-pole battery isolating switch Interrupts the entire circuit by simply turning the knob Prevents battery discharge, electrical fires, unauthorized operation, etc. Battery disconnect switch is connected to the pole Avoids tedious unscrewing of battery cables when charging Quick and easy installation Application: MOTOR VEHICLES Caravan and motorhome

With the battery disconnect switch, your battery can be safely disconnected to reduce power consumption when the device, vehicle or boat is not in use. The switch is suitable for automotive electronics, electrical products and all types of 12V/24V vehicles, boats, motorhomes, etc. The practical rotary switch is very easy to use and works smoothly. ON (green) means switching on the circuit and OFF (red) means switching off. Switch the power supply on or off safely to avoid electric shock. Features Suitable for 12V / 24VContinuous current 12V DC: 275AIntermittent current 12V DC: 455AInstantaneous current 12V DC: 1250AWeight: 260gDimensions of disconnector: 69 x 69 x 75mmDimensions for the 4 removable cable glands: 45 x 20mm Guard and locking service The switch can be used as an independent unit or in parallel with other switches. It can effectively protect the power supply, reduce battery loss and extend battery life. Durable material The disconnect switch is made of CE-certified, high-quality ABS flame-retardant reinforced nylon and silver-plated red copper bolts. It is resistant to moisture, UV and ageing and has a long service life. The rear cover is insulated to prevent short circuits, meet safety requirements and effectively prevent electrical accidents. Easy installation The battery isolator can be installed quickly and easily. Attention must be paid to the arrangement of the positive and negative wires, then install the corresponding lining plate and tighten the four screws to prevent the cable connector from being exposed to the air and oxidized. Scope of delivery: 1x battery switch1x bottom cover4x screws + nuts for fastening

The Votronic switch panel 2 x 16 A S (MPN 1291) for 12V and 24V systems has been specially developed for use in motorhomes. The integrated individual switches can be used to switch connected consumer groups on or off separately. The switches can each be loaded with 2x 8A or 1x 16A. Important product features: 2 individual switches 2xUM with flat plug connection Load capacity: max. 2x 8A or 1x 16A Suitable for 12V and 24V systemsDimensions: 47 x 85 x 25 mm The switch panel 2 x 16 A is part of the Votronic switch and fuse panel series which, in addition to panels for switches, main switches and fuses, also includes a USB port panel and a socket outlet panel with the same look. Scope of delivery: 1x Votronic 1291 switch panel 2x 16A 12V/24V

Battery isolator switch 6 V, 12 V, 24 V red The switch can be individually connected to the battery thanks to the rotatable connection. The pole terminal is screwed to the negative pole of the battery. The power supply is interrupted or opened by opening the rotary wheel (red). This allows you to disconnect the battery from the mains without having to unscrew it. This is also effective if your car is not used for a longer period of time. This also provides a very simple and effective anti-theft device. Advantages: Max. Load capacity: 100 A Operating voltage: 6 Volt/ 12 Volt/ 24 Volt Size (LxWxH): approx. 58 x 52 x 52 cm Single-pole battery disconnector Interrupts the entire circuit by simply turning the knob Prevents battery discharge, electrical fires, unauthorized operation, etc. Battery disconnect switch is connected to the pole Avoids tedious unscrewing of battery cables when charging Quick and easy installation Application: MOTOR VEHICLES Caravan and motorhome

VOTRONIC Switch Unit 40 dient als Haupt Ein- und Ausschalter für ihr 12 / 24 Volt - Bordnetz und kann mit einem eigengen Schalter bedient werden.VOTRONIC Switch Unit 40 arbeitet auf der Basis eines bistabilen Leistungsrelais. Sein Eigenverbrauch ist äußerst gering. Er ist besonders als ferngesteuerter Hauptschalter oder als Lastrelais, das lange Zeit eingeschaltet bleiben soll, geeignet. Die Strombelastbarkeit beträgt 40 A.Switch Unit 40 kann durch einen einfachen Schalter (1pol. EIN / AUS) fernbedient werden. Der Schalter wird nur sehr gering belastet (0,002 A), so dass auch eine Miniaturausführung ausreichend ist.Zudem können über eine NOT-EIN-Funktion (EMERGENCY-Schalter) die Verbraucher auch manuell am Relais ein- bzw. ausgeschaltet werden.Bei Schalter „AUS“ ist die gesamte Elektronik komplett abgeschaltet; der ohnehin sehr geringe Eigenstromverbrauch der Switch Unit 40 entfällt dann ganz.In der Bedienungsanleitung befindet sich ein leicht verständlicher Schaltplan wie die Schalteinheit in ihr Netz integriert wird.Der Einsatzbereich erstreckt sich über Wohnmobile, Boote bis hin zu Einsatzfahrzeugen:Betriebsspannung: 12 V / 24 VBetriebstemperaturbereich: -20° ... +50°CEigenverbrauch: 3 mAFür Kabelquerschnitt: 2,5 - 10 mm²Gewicht: 97 gHersteller: VotronicKategoriename: Zubehör LadereglerLuftfeuchtigkeit: max. 95 % RF (nicht kondensierend)Produkttyp 1: BatterieschalterRoHS Konform: JaSchutzart (IP): IP21Zertifizierung: E-Prüfung (EMV/Kfz-Richtlinie)Lieferumfang: Switch Unit 40, Betriebsanleitung