Voltima 12-fold fuse holder for car flat fuse with LED display
Product information "Voltima 12-fold fuse holder for car flat fuse with LED display"
The Voltima 12-fuse holder enables the professional distribution and protection of small and medium-sized consumers. It consolidates branch circuits and eliminates the clutter of inline fuses for electronics and other devices. Includes the 12-pole fuse holder, 6 flat fuses from 5A-20A each, nameplates and screws for fixing. The fuse holder is made of environmentally friendly PBT material with high mechanical strength, insulation, heat resistance and flame retardancy
Flat fuses
The fuse holder contains 24 flat fuses, including 6x 5A, 6x 10A, 6x 15A and 6x 20A. The fuses meet the high Offgridtec quality standards, have a long service life and offer a wide, acceptable temperature range. The multifunctional labels supplied make it very easy to identify and connect the connected cables. The integrated LED indicators provide additional protection. If a fuse blows, the red LED lights up immediately and you can quickly identify the fault and rectify it straight away.
High-quality workmanship
The clip-lock protective cover provides optimum protection for the fuse holder. The insulating cover with push-latch system can be opened easily by pressing. The transparent design offers your blade fuses additional protection. The holder is made of environmentally friendly PBT material with high mechanical strength, insulation, heat resistance and flame retardancy. Problems such as cracks, deformations, burns or short circuits hardly ever occur.
Assembly
The set also includes four stainless steel screws. These robust screws are corrosion-resistant and ensure a long and secure installation. The input and output connections of the fuse holder are fastened with quick-mounting screws and the fuse box is fastened with the stainless steel screws, making installation easier and safer.
Technical data
- Weight: 268.5g
- Dimensions: 138.25 x 88 x 36.5 mm
- Input voltage: 12V-32V DC
- Input current: 100A
- Rated power output connections: max. 30A per circuit
- Number of circuits/fuse slots: 12
- Main cable connection: M5 grub screw
- Main cable: 4-6AWG
- Single line connection: M4 threaded bolt
- Single wire: 12-16AWG
- Operating temperature: -30°C - +85°C
Scope of delivery:
1x 12-pole fuse holder
6x 5A fuse blade orange
6x 10A fuse blade red
6x 15A fuse blade blue
6x 20A fuse blade yellow
2x stickers
4x stainless steel screws
| Connections: | M6 threaded rod |
|---|---|
| Dimensions (L x W x H): | 138.25 x 88 x 36.5mm |
| Sicherungs Typ: | Kfz-Stecksicherungen / ATO |
| Tension: | 12V, 24V, max. 32V |
Login
Ähnliche Artikel
Votronic 1285 Fuse panel 4 S
Fuse panels for on-board electrics Switch electrical devices and fuse circuits, individually configure them according to your requirements and label them clearly. These are the features of these control and switching devices. Equipped with automatic circuit breakers, the tiresome search for the right replacement fuse is a thing of the past. They are ready for use again at the touch of a button. Panels with a uniform height of 85 mm are offered to match the VOTRONIC modular system and can be used as individual devices or in combination. The wide range of possible applications allows the user to put together a complete information and control center. Fuse panel 4 S Circuit breakers 6A, 8A, 10A, pre-wired to the group 1 circuit breaker 12A, individually switchable Suitable for 12V and 24V Connection via flat plug Optical tripping control Scope of delivery: 1x Votronic 1285 fuse panel 4 S
€49.33*
Votronic 2216 High-load fuse holder 5-fold with cover
This 5-fold heavy-duty fuse holder from Votronic (MPN 2216) is a fully insulated fuse holder with a main fuse (heavy-duty fuse) via M8 threaded bolts (MEGA fuses) and 4 circuit fuses (automotive screw-in fuses) via M5 threaded bolts (MIDI fuses) for protecting large consumers or heavy-duty circuits. Supplied without fuses. Dimensions: 116 x 95 x 40 mm Scope of delivery: 1x Votronic 2216 5-way high-load fuse holder with cover
€49.88*
Voltima 8-way high-load fuse holder with cover
This fuse box can accommodate a MEGA fuse (main fuse/high load fuse via M8 threaded bolt) suitable for currents from 40 to 200 amps and 7 MIDI fuses (M5 threaded bolt) suitable for currents from 30 to 100 amps. This allows you to choose the fuse that best suits your specific needs and ensure that your electrical system is protected from damage. The fuse box is made from high-quality materials that can withstand tough everyday use. The fixture is also impact resistant, so it will stay in place and continue to provide reliable protection for your electrical system. The fuse box is an excellent choice for anyone who needs reliable protection for their electrical system. It can also be used to create complicated systems with a wide variety of components in a well-organized, clear and safe manner. Technical data Weight: 200gDimensions: 167 x 105 x 35 mmInput voltage: 12V-32V DCInput current: 200ARated power output connections: max. 100A per circuitNumber of circuits/fuse slots: 7Main cable connection: M6 grub screwIndividual line connection: M6 threaded bolt Scope of delivery: 1x 5-way high-load fuse holder with cover
€39.00*
Votronic 2251 High-load fuse holder with cover (for MEGA fuses)
High-load fuse holder with cover for automotive screw-in fuses Fully insulated fuse holder for high-load fuses for protecting large consumers or high-load circuits. The fuse holder can be bayed and is equipped with M5 threaded bolts on both sides. Supplied without vehicle screw-in fuse. Dimensions: 61 x 30 x 25 mm
€14.89*
K24 MEGA fuse holder 9399, black
Fuse holder for a mega power fuse M8 threaded bolts and hexagon nuts Dimension: 120 x 42 mm Splash-proof Mega power fuse NOT included in the scope of delivery Model number : SB-122
€15.00*
Voltima MIDI fuse holder 1-fold holder max. 200A
The screw-type MIDI fuse holder from Voltima is used for the secure installation of DC MIDI fuses. The eyelets of the cable ends can be placed directly on the threaded bolts and screwed tight. This guarantees a firm and permanent connection, preventing voltage drop as far as possible. The housing with matching cover provides solid protection. MIDI-Fuse type fuses are strip fuses and are screwed directly to the holder. The corresponding nuts and snap rings are already pre-assembled on the holder. Features For 1 fuse Max. 200A current Max. 58V DC voltage For MIDI fuse type fuses High-strength plastic housing Required retaining rings and nuts included Note : Only the holder is included in the scope of delivery, the fuses must be purchased separately. Scope of delivery: 1x Voltima MIDI fuse holder, single
€2.14*
Voltima MIDI fuse holder 1-fold holder max. 200A
The screw-type MIDI fuse holder from Voltima is used for the secure installation of DC MIDI fuses. The eyelets of the cable ends can be placed directly on the threaded bolts and screwed tight. This guarantees a firm and permanent connection, preventing voltage drop as far as possible. The housing with matching cover provides solid protection. MIDI-Fuse type fuses are strip fuses and are screwed directly to the holder. The corresponding nuts and snap rings are already pre-assembled on the holder. Features For 1 fuse Max. 200A current Max. 58V DC voltage For MIDI fuse type fuses High-strength plastic housing Required retaining rings and nuts included Note : Only the holder is included in the scope of delivery, the fuses must be purchased separately. Scope of delivery: 1x Voltima MIDI fuse holder, single
€1.80*
Victron Energy MIDI-Sicherungshalter - CIP000050001 (Umsatzsteuerbefreit)
Der MIDI-Fuse Sicherung Halter von Victron Energy (MPN CIP000050001) mit Deckel dient der sicheren Installation von DC MIDI-Fuse Streifensicherungen. Das Gehäuse bietet einen soliden Schutz der Sicherung. Sicherungen vom TYP MIDI-Fuse zählen zu den Streifensicherungen und werden am Halter verschraubt. Entsprechende Muttern und Sprengringe sind am Halter bereits vormontiert.wichtige Artikelmerkmale im Überblick: 200A maximale Strom bei max. 58V DC für Sicherungen vom Typ MIDI-Fuse hochfestes Kunststoff gehäuse, komplett mit Sicherungsringen und Muttern zur Installation Ihrer Sicherung entspricht der Norm IEC 60947-3: 1999 + A1: 2001 + A2: 2005 in Verbindung mit IEC 60947-1: 2004 Hinweise: Im Lieferumfang ist nur der Halter wie abgebildet enthalten, die Sicherungen müssen separat erworben werden.Lieferumfang:1x Victron CIP000050001 MIDI-FUSE Sicherung Halter
€7.84*
Votronic 2218 High-load fuse holder with cover for automotive screw-in fuses (MIDI fuses)
Fully insulated fuse holder for high-load fuses (automotive screw-in fuses, also known as MIDI fuses) for protecting large loads or high-load circuits. The fuse holder can be bayed and is equipped with M5 threaded bolts on both sides. Technical data: Dimensions: 61 x 30 x 25 mm Thread type: M5 Note: Supplied without automotive screw-in fuse
€13.26*
Voltima Mega fuse holder, black, 126x37.5x43.5 mm (M8)
Fuse holder for a mega power fuse M8 threaded bolts and hexagon nuts Dimensions: 126x37.5x43.5mm Splash-proof Mega power fuse NOT included in the scope of delivery Model number : VMEGA-1
€3.96*
Victron Energy MEGA-Sicherungshalter - CIP000100001
Der MEGA-Fuse Sicherung Halter von Victron Energy (CIP000100001) mit Deckel dient der sicheren Installation von DC MEGA-Fuse Streifensicherungen. Das Gehäuse bietet einen soliden Schutz der Sicherung vor äusseren Einflüssen.wichtige Artikelmerkmale im Überblick: 500A max. Strom bei max. 32V DC 300A max. Strom bei 58V DC für Sicherungen vom Typ MEGA-Fuse Material: hochfeste Kunststoff-Mischung Entspricht IEC 60947-3: 1999 + A1: 2001 + A2: 2005 in Verbindung mit IEC 60947-1: 2004 über die MEGA-StreifensicherungSicherungen vom Typ MEGA-Fuse zählen zu den Streifensicherungen und werden am Halter verschraubt um einen optimalen Kontakt zu gewährleisten. Entsprechende Muttern und Sprengringe sind am Halter bereits vormontiert.Mit Mega-Sicherungen können bei 32V DC bis zu 500A abgesichert werden. Bei den 58V Varianten sind bis zu 300A möglich. 32V Mega-Fuse Sicherungen - alle Größen bis max. 500A 58V Mega-Fuse Sicherungen - alle Größen bis max. 300A Lieferumfang:1x Victron Energy MEGA-FUSE Sicherungshalter
€11.18*
Victron MEGA fuse holder - modular CIP100200100
The modular MEGA-Fuse fuse holder from Victron Energy (MPN CIP100200100) with cover is used for the safe installation of DC MEGA-Fuse strip fuses together with up to 5 other fuses on a common busbar. This solution is ideal for protecting Multiplus or Quattro inverters connected in parallel or inverters from other manufacturers. The fuse holders can be plugged together so that all fuse holders are firmly anchored in position on the busbar. (see picture)The housing provides solid protection for the fuse against external influences. There are currently two busbar versions that can be used with the modular holder:Victron Busbar 5 CIP100400060 - for 5 holders of type CIP100200100, max 500AVictron Busbar 6 CIP100400070 - for 6 holders of type CIP100200100, max 2000AImportant article features at a glance:500A max. current at max. 32V DC300A max. current at 58V DCfor joint use with the Victron Energy 5 and 6 busbarsfor MEGA-Fuse type fusesMaterial: high-strength plastic compoundAbout the MEGA fuseMEGA-Fuse fuses are strip fuses and are screwed to the holder to ensure optimum contact. The corresponding nuts and snap rings are already pre-assembled on the holder.Mega fuses can be used to protect up to 500A at 32V DC. Up to 300A is possible with the 58V variants.32V MEGA-Fuse fuses - 60A to 500A58V MEGA-Fuse fuses - 125A to 300AScope of delivery:1x Victron CIP100200100 modular MEGA-FUSE fuse holder
€41.17*
Votronic 3203 Plus-Distributor 6 circuit distributor motorhome
The compact, powerful plus distributor with 6 individual circuits enables the professional distribution and protection of small and medium-sized consumers on the battery plus side. Two large collective terminals (cable cross-sections up to 16 mm², current carrying capacity max. 50 A) are used to supply power from the battery and can also be used for further positive feed-through distribution. The fuse holders on the consumer side are designed for commercially available FKS fuses with a rating of 1 A to 20 A; the scope of delivery includes types 15 A, 10 A and 4 x 7.5 A. The associated six distribution terminals allow cable cross-sections of up to 4 mm² with a maximum current carrying capacity of 20 A. Labeling fields on the housing make it easy to assign the fuses to their circuits. Suitable for 12 V and 24 V operation. Connection 1Screw terminals: 2 large connection terminals plus side Cable cross-sections 6 mm2 10mm2 16mm2 Current carrying capacity: max. 36 A Total current max. 50 A Total current max. 50 A Total currentConnection 26 small connection terminals on the consumer side, cable cross-sections: 0.75mm2 1.5mm2 2.5mm2 4mm2 Current load capacities: max. 6 A max. 10 A max. 15 A max. 20 A
€31.06*
Voltima 6-fold fuse holder for car flat fuse with LED display
The Voltima 6-fuse holder enables the professional distribution and protection of small and medium-sized consumers. It consolidates branch circuits and eliminates the clutter of inline fuses for electronics and other devices. Includes the 6-pole fuse holder, flat fuses from 5A-20A, nameplates and fixing screws. The fuse holder is made of environmentally friendly PBT material with high mechanical strength, insulation, heat resistance and flame retardancy Flat fuses The fuse holder contains 12 flat fuses, including 2x 5A, 2x 10A, 4x 15A and 4x 20A. The fuses meet the high Offgridtec quality standards, have a long service life and offer a wide, acceptable temperature range. The multifunctional labels supplied make it very easy to identify and connect the connected cables. The integrated LED indicators provide additional protection. If a fuse blows, the red LED lights up immediately and you can quickly identify the fault and rectify it straight away. High-quality workmanship The clip-lock protective cover provides optimum protection for the fuse holder. The insulating cover with push-latch system can be opened easily by pressing. The transparent design offers your blade fuses additional protection. The holder is made of environmentally friendly PBT material with high mechanical strength, insulation, heat resistance and flame retardancy. Problems such as cracks, deformations, burns or short circuits hardly ever occur. Assembly The set also includes four stainless steel screws. These robust screws are corrosion-resistant and ensure a long and secure installation. The input and output connections of the fuse holder are fastened with quick-mounting screws and the fuse box is fastened with the stainless steel screws, making installation easier and safer. Technical data Weight: 176gDimensions: 87.75 x 85 x 36.5 mmInput voltage: 12V-32V DCInput current: 100ARated power output connections: max. 30A per circuitNumber of circuits/fuse slots: 6Main cable connection: M5 grub screwMain cable: 4-6AWGSingle line connection: M4 threaded boltSingle wire: 12-16AWGOperating temperature: -30°C - +85°C Scope of delivery: 1x 6-pole fuse holder2x 5A fuse blade orange2x 10A fuse blade red4x 15A fuse blade blue4x 20A fuse blade yellow2x stickers4x screws
€11.90*