The Phoenix 48/5000 Smart Inverter from Victron Energy Victron Energy (MPN PIN482500000) is an advanced inverter based on the proven Phoenix series. It offers a continuous output of 5000W and is designed for 48V battery voltage. Compared to the previous models, the Phoenix Smart series has a Bluetooth module and a VE.Direct output for wireless remote monitoring and system configuration. The Phoenix 48/5000 Smart is also characterized by its high switch-on performance and reliability and, thanks to the integrated ECO mode, also plays in the top league of this device class in terms of self-consumption and efficiency. Phoenix 48/5000 Smart performance features for 48V battery voltage, output voltage 230 VAC ±2% Output power (non-linear): 5000W, 4000W linear continuous load at 25 degrees ambient temperature 10000W peak power to cope with high starting currents integrated Bluetooth module and VE.Direct port for wireless monitoring and system integration Designed for high inrush currents integrated alarm relay, ECO mode Monitoring of input and output voltage, load and alarms etc. via Bluetooth or VE.Direct Integrated, two-pole plug for connecting an on/off switch (remote control) Parameters configurable via Bluetooth or VE.Direct Low battery voltage alarm Threshold values for switching off and restarting at low battery voltage values Dynamic switch-off: load-dependent switch-off threshold value Output voltage: 230 VAC ±2%, frequency: 50 Hz or 60 Hz Threshold value for ECO mode on/off and ECO mode sensor Alarm relay High reliability thanks to toroidal transformer topologyComplete bridging with an additional toroidal transformer topology has proven itself over many years. The inverters are short-circuit-proof and protected against overheating (whether caused by overload or ambient temperature). Very high switch-on powerThis is required for switching on loads such as voltage converters for LED lamps, halogen lamps or power tools. Eco modeIn ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on every 2.5 seconds for a short period of time (adjustable). If the load exceeds the preset threshold value, the inverter remains switched on. Remote-controlled on/off switchingA remote-controlled on/off switch or a relay contact can be connected to the two-pole plug. Alternatively, connection H (left) of the two-pin plug can be connected to a positive battery terminal or connection L (right) of the two-pin plug can be connected to the negative battery terminal (or to the body of a vehicle, for example). Scope of delivery: 1x Victron PIN482500000 Phoenix Smart 48/50001x operating instructions

This control panel from Victron Energy (MPN REC040010210R) is used to remotely control all Phoenix VE.Direct inverters. The built-in control panel has an on/off switch and an indicator light. The connection to the inverter is made via a 2-wire control cable (not included). Features Compatible with all Phoenix inverters with VE.Direct interfaceSimple installationWeight: 0.04 kgDimensions: 60 x 65 x 33 mm Scope of delivery: 1x Victron Phoenix Inverter control panel REC040010210R