Victron Phoenix - High-quality inverter technology guarantees you pure sine wave Inverters are used in particular where electrical systems require alternating voltage or alternating current for their operation, but only a direct voltage source is available as a power supplier (e.g. car battery). The sophisticated inverter technology of the Victron Phoenix inverter converts any 12V DC voltage into an average 230V sine wave voltage (AC voltage of 50 Hertz). The convenient inverter provides you with a power range between 150 watts and 3000 watts per module. Enjoy the solid output power of this electrotechnical device with an extremely high efficiency of up to 99 percent. Exceptional safety with a high switch-on potential Our Victron Phoenix inverter works completely fault-free even in the event of spontaneous short circuits. The device is also reliably protected against overheating (e.g. due to overloading). A high switch-on power ensures, among other things, the reliable operation of all halogen headlights on your vehicle. The smart combination of high-frequency and mains frequency technology also offers you the best possible conditions for any demanding electrotechnical application. If you are interested in our exclusive inverter technology, you can purchase the competitively priced inverter "Victron Phoenix" in our online store.

This control panel from Victron Energy (MPN REC040010210R) is used to remotely control all Phoenix VE.Direct inverters. The built-in control panel has an on/off switch and an indicator light. The connection to the inverter is made via a 2-wire control cable (not included). Features Compatible with all Phoenix inverters with VE.Direct interfaceSimple installationWeight: 0.04 kgDimensions: 60 x 65 x 33 mm Scope of delivery: 1x Victron Phoenix Inverter control panel REC040010210R

Victron Phoenix - High-quality inverter technology guarantees you pure sine wave Inverters are used in particular where electrical systems require alternating voltage or alternating current for their operation, but only a direct voltage source is available as a power supplier (e.g. car battery). The sophisticated inverter technology of the Victron Phoenix inverter converts any 12V DC voltage into an average 230V sine wave voltage (AC voltage of 50 Hertz). The convenient inverter provides you with a power range between 150 watts and 3000 watts per module. Enjoy the solid output power of this electrotechnical device with an extremely high efficiency of up to 99 percent. Exceptional safety with a high switch-on potential Our Victron Phoenix inverter works completely fault-free even in the event of spontaneous short circuits. The device is also reliably protected against overheating (e.g. due to overloading). A high switch-on power ensures, among other things, the reliable operation of all halogen headlights on your vehicle. The smart combination of high-frequency and mains frequency technology also offers you the best possible conditions for any demanding electrotechnical application. If you are interested in our exclusive inverter technology, you can purchase the competitively priced inverter "Victron Phoenix" in our online store.

Victron Phoenix - High-quality inverter technology guarantees you pure sine wave Inverters are used in particular where electrical systems require alternating voltage or alternating current for their operation, but only a direct voltage source is available as a power supplier (e.g. car battery). The sophisticated inverter technology of the Victron Phoenix inverter converts any 12V DC voltage into an average 230V sine wave voltage (AC voltage of 50 Hertz). The convenient inverter provides you with a power range between 150 watts and 3000 watts per module. Enjoy the solid output power of this electrotechnical device with an extremely high efficiency of up to 99 percent. Exceptional safety with a high switch-on potential Our Victron Phoenix inverter works completely fault-free even in the event of spontaneous short circuits. The device is also reliably protected against overheating (e.g. due to overloading). A high switch-on power ensures, among other things, the reliable operation of all halogen headlights on your vehicle. The smart combination of high-frequency and mains frequency technology also offers you the best possible conditions for any demanding electrotechnical application. If you are interested in our exclusive inverter technology, you can purchase the competitively priced inverter "Victron Phoenix" in our online store.

Victron Phoenix - High-quality inverter technology guarantees you pure sine wave Inverters are used in particular where electrical systems require alternating voltage or alternating current for their operation, but only a direct voltage source is available as a power supplier (e.g. car battery). The sophisticated inverter technology of the Victron Phoenix inverter converts any 12V DC voltage into an average 230V sine wave voltage (AC voltage of 50 Hertz). The convenient inverter provides you with a power range between 150 watts and 3000 watts per module. Enjoy the solid output power of this electrotechnical device with an extremely high efficiency of up to 99 percent. Exceptional safety with a high switch-on potential Our Victron Phoenix inverter works completely fault-free even in the event of spontaneous short circuits. The device is also reliably protected against overheating (e.g. due to overloading). A high switch-on power ensures, among other things, the reliable operation of all halogen headlights on your vehicle. The smart combination of high-frequency and mains frequency technology also offers you the best possible conditions for any demanding electrotechnical application. If you are interested in our exclusive inverter technology, you can purchase the competitively priced inverter "Victron Phoenix" in our online store.

The Phoenix 48/5000 Smart Inverter from Victron Energy Victron Energy (MPN PIN482500000) is an advanced inverter based on the proven Phoenix series. It offers a continuous output of 5000W and is designed for 48V battery voltage. Compared to the previous models, the Phoenix Smart series has a Bluetooth module and a VE.Direct output for wireless remote monitoring and system configuration. The Phoenix 48/5000 Smart is also characterized by its high switch-on performance and reliability and, thanks to the integrated ECO mode, also plays in the top league of this device class in terms of self-consumption and efficiency. Phoenix 48/5000 Smart performance features for 48V battery voltage, output voltage 230 VAC ±2% Output power (non-linear): 5000W, 4000W linear continuous load at 25 degrees ambient temperature 10000W peak power to cope with high starting currents integrated Bluetooth module and VE.Direct port for wireless monitoring and system integration Designed for high inrush currents integrated alarm relay, ECO mode Monitoring of input and output voltage, load and alarms etc. via Bluetooth or VE.Direct Integrated, two-pole plug for connecting an on/off switch (remote control) Parameters configurable via Bluetooth or VE.Direct Low battery voltage alarm Threshold values for switching off and restarting at low battery voltage values Dynamic switch-off: load-dependent switch-off threshold value Output voltage: 230 VAC ±2%, frequency: 50 Hz or 60 Hz Threshold value for ECO mode on/off and ECO mode sensor Alarm relay High reliability thanks to toroidal transformer topologyComplete bridging with an additional toroidal transformer topology has proven itself over many years. The inverters are short-circuit-proof and protected against overheating (whether caused by overload or ambient temperature). Very high switch-on powerThis is required for switching on loads such as voltage converters for LED lamps, halogen lamps or power tools. Eco modeIn ECO mode, the inverter switches to standby as soon as the load falls below a preset value. In standby mode, the inverter then switches on every 2.5 seconds for a short period of time (adjustable). If the load exceeds the preset threshold value, the inverter remains switched on. Remote-controlled on/off switchingA remote-controlled on/off switch or a relay contact can be connected to the two-pole plug. Alternatively, connection H (left) of the two-pin plug can be connected to a positive battery terminal or connection L (right) of the two-pin plug can be connected to the negative battery terminal (or to the body of a vehicle, for example). Scope of delivery: 1x Victron PIN482500000 Phoenix Smart 48/50001x operating instructions

Victron Phoenix - High-quality inverter technology guarantees you pure sine wave Inverters are used in particular where electrical systems require alternating voltage or alternating current for their operation, but only a direct voltage source is available as a power supplier (e.g. car battery). The sophisticated inverter technology of the Victron Phoenix inverter converts any 12V DC voltage into an average 230V sine wave voltage (AC voltage of 50 Hertz). The convenient inverter provides you with a power range between 150 watts and 3000 watts per module. Enjoy the solid output power of this electrotechnical device with an extremely high efficiency of up to 99 percent. Exceptional safety with a high switch-on potential Our Victron Phoenix inverter works completely fault-free even in the event of spontaneous short circuits. The device is also reliably protected against overheating (e.g. due to overloading). A high switch-on power ensures, among other things, the reliable operation of all halogen headlights on your vehicle. The smart combination of high-frequency and mains frequency technology also offers you the best possible conditions for any demanding electrotechnical application. If you are interested in our exclusive inverter technology, you can purchase the competitively priced inverter "Victron Phoenix" in our online store.

Victron Phoenix - High-quality inverter technology guarantees you pure sine wave Inverters are used in particular where electrical systems require alternating voltage or alternating current for their operation, but only a direct voltage source is available as a power supplier (e.g. car battery). The sophisticated inverter technology of the Victron Phoenix inverter converts any 12V DC voltage into an average 230V sine wave voltage (AC voltage of 50 Hertz). The convenient inverter provides you with a power range between 150 watts and 3000 watts per module. Enjoy the solid output power of this electrotechnical device with an extremely high efficiency of up to 99 percent. Exceptional safety with a high switch-on potential Our Victron Phoenix inverter works completely fault-free even in the event of spontaneous short circuits. The device is also reliably protected against overheating (e.g. due to overloading). A high switch-on power ensures, among other things, the reliable operation of all halogen headlights on your vehicle. The smart combination of high-frequency and mains frequency technology also offers you the best possible conditions for any demanding electrotechnical application. If you are interested in our exclusive inverter technology, you can purchase the competitively priced inverter "Victron Phoenix" in our online store.

Victron Phoenix - High-quality inverter technology guarantees you pure sine wave Inverters are used in particular where electrical systems require alternating voltage or alternating current for their operation, but only a direct voltage source is available as a power supplier (e.g. car battery). The sophisticated inverter technology of the Victron Phoenix inverter converts any 12V DC voltage into an average 230V sine wave voltage (AC voltage of 50 Hertz). The convenient inverter provides you with a power range between 150 watts and 3000 watts per module. Enjoy the solid output power of this electrotechnical device with an extremely high efficiency of up to 99 percent. Exceptional safety with a high switch-on potential Our Victron Phoenix inverter works completely fault-free even in the event of spontaneous short circuits. The device is also reliably protected against overheating (e.g. due to overloading). A high switch-on power ensures, among other things, the reliable operation of all halogen headlights on your vehicle. The smart combination of high-frequency and mains frequency technology also offers you the best possible conditions for any demanding electrotechnical application. If you are interested in our exclusive inverter technology, you can purchase the competitively priced inverter "Victron Phoenix" in our online store.

Victron Phoenix - High-quality inverter technology guarantees you pure sine wave Inverters are used in particular where electrical systems require alternating voltage or alternating current for their operation, but only a direct voltage source is available as a power supplier (e.g. car battery). The sophisticated inverter technology of the Victron Phoenix inverter converts any 12V DC voltage into an average 230V sine wave voltage (AC voltage of 50 Hertz). The convenient inverter provides you with a power range between 150 watts and 3000 watts per module. Enjoy the solid output power of this electrotechnical device with an extremely high efficiency of up to 99 percent. Exceptional safety with a high switch-on potential Our Victron Phoenix inverter works completely fault-free even in the event of spontaneous short circuits. The device is also reliably protected against overheating (e.g. due to overloading). A high switch-on power ensures, among other things, the reliable operation of all halogen headlights on your vehicle. The smart combination of high-frequency and mains frequency technology also offers you the best possible conditions for any demanding electrotechnical application. If you are interested in our exclusive inverter technology, you can purchase the competitively priced inverter "Victron Phoenix" in our online store.

The Victron Phoenix 12/375 VE.Direct (MPN PIN121371200) is a compact pure sine wave inverter with 300W continuous output. It converts 12V DC from your battery into 230V AC power with a pure sine wave and uncompromising power quality, making it ideal for sensitive electronic devices. The Phoenix boasts excellent efficiency and is one of the best in its class thanks to its ECO mode. Using the VE.Direct communication port and optional accessories, you can connect the device to a computer or smartphone to freely program system parameters, such as low battery shutoff and restart voltages. Additional configuration options include output frequency, output voltage, and a two-pole alarm contact, among other features. The performance of the Phoenix VE.Direct series 250-500 is currently unmatched on the market at its price point, exceeding the capabilities of other devices in the same power class. Technical Features of the Phoenix 12/375 VE.Direct 300 watts of continuous power at 230V 50Hz sine waveCompatible with all standard 12V batteriesDelivers 230V AC power with pure sine wave for excellent power qualityFully programmable on/off voltage thresholdsAdjustable output voltage range from 210 to 245V Technical Highlights of the Phoenix VE.Direct Series 250VA – 500VA VE.Direct port allows connection to a computer (requires VE.Direct to USB interface cable) or smartphone, where you can monitor the device status using the free Victron app (requires VE.Direct Bluetooth Smart Dongle).Fully programmable parameters: thresholds for triggering and resetting alarms due to low battery charge + thresholds for shutting down and restarting at low battery voltage levels + output voltage (210-245V) + frequency (50Hz or 60Hz) + ECO mode on/off thresholds and ECO mode sensor.Integrated ECO mode: In ECO mode, the inverter switches to standby when the load drops below a preset value. In standby mode, the inverter briefly turns on at intervals (default: every 2.5 seconds). If the load exceeds a preset threshold during this time, the inverter remains on. Proven Reliability: The full bridge design with toroidal transformer topology has been proven over years of use. The inverters are short-circuit proof and protected against overheating (caused by overload or ambient temperature).High start-up power: Essential for starting loads such as voltage converters for LED lamps, halogen lamps, or power tools.Remote on/off switch: A remote on/off switch can be connected using a two-pole connector or between the battery's positive terminal and the left contact of the two-pole connector. Scope of Delivery:1x Victron PIN121371200 Phoenix 12/375 12V to 230V 300W 50Hz 60Hz

Victron Phoenix - High-quality inverter technology guarantees you pure sine wave Inverters are used in particular where electrical systems require alternating voltage or alternating current for their operation, but only a direct voltage source is available as a power supplier (e.g. car battery). The sophisticated inverter technology of the Victron Phoenix inverter converts any 12V DC voltage into an average 230V sine wave voltage (AC voltage of 50 Hertz). The convenient inverter provides you with a power range between 150 watts and 3000 watts per module. Enjoy the solid output power of this electrotechnical device with an extremely high efficiency of up to 99 percent. Exceptional safety with a high switch-on potential Our Victron Phoenix inverter works completely fault-free even in the event of spontaneous short circuits. The device is also reliably protected against overheating (e.g. due to overloading). A high switch-on power ensures, among other things, the reliable operation of all halogen headlights on your vehicle. The smart combination of high-frequency and mains frequency technology also offers you the best possible conditions for any demanding electrotechnical application. If you are interested in our exclusive inverter technology, you can purchase the competitively priced inverter "Victron Phoenix" in our online store.

Victron Phoenix - High-quality inverter technology guarantees you pure sine wave Inverters are used in particular where electrical systems require alternating voltage or alternating current for their operation, but only a direct voltage source is available as a power supplier (e.g. car battery). The sophisticated inverter technology of the Victron Phoenix inverter converts any 12V DC voltage into an average 230V sine wave voltage (AC voltage of 50 Hertz). The convenient inverter provides you with a power range between 150 watts and 3000 watts per module. Enjoy the solid output power of this electrotechnical device with an extremely high efficiency of up to 99 percent. Exceptional safety with a high switch-on potential Our Victron Phoenix inverter works completely fault-free even in the event of spontaneous short circuits. The device is also reliably protected against overheating (e.g. due to overloading). A high switch-on power ensures, among other things, the reliable operation of all halogen headlights on your vehicle. The smart combination of high-frequency and mains frequency technology also offers you the best possible conditions for any demanding electrotechnical application. If you are interested in our exclusive inverter technology, you can purchase the competitively priced inverter "Victron Phoenix" in our online store.

Victron Phoenix - High-quality inverter technology guarantees you pure sine wave Inverters are used in particular where electrical systems require alternating voltage or alternating current for their operation, but only a direct voltage source is available as a power supplier (e.g. car battery). The sophisticated inverter technology of the Victron Phoenix inverter converts any 12V DC voltage into an average 230V sine wave voltage (AC voltage of 50 Hertz). The convenient inverter provides you with a power range between 150 watts and 3000 watts per module. Enjoy the solid output power of this electrotechnical device with an extremely high efficiency of up to 99 percent. Exceptional safety with a high switch-on potential Our Victron Phoenix inverter works completely fault-free even in the event of spontaneous short circuits. The device is also reliably protected against overheating (e.g. due to overloading). A high switch-on power ensures, among other things, the reliable operation of all halogen headlights on your vehicle. The smart combination of high-frequency and mains frequency technology also offers you the best possible conditions for any demanding electrotechnical application. If you are interested in our exclusive inverter technology, you can purchase the competitively priced inverter "Victron Phoenix" in our online store.

Victron Phoenix - High-quality inverter technology guarantees you pure sine wave Inverters are used in particular where electrical systems require alternating voltage or alternating current for their operation, but only a direct voltage source is available as a power supplier (e.g. car battery). The sophisticated inverter technology of the Victron Phoenix inverter converts any 12V DC voltage into an average 230V sine wave voltage (AC voltage of 50 Hertz). The convenient inverter provides you with a power range between 150 watts and 3000 watts per module. Enjoy the solid output power of this electrotechnical device with an extremely high efficiency of up to 99 percent. Exceptional safety with a high switch-on potential Our Victron Phoenix inverter works completely fault-free even in the event of spontaneous short circuits. The device is also reliably protected against overheating (e.g. due to overloading). A high switch-on power ensures, among other things, the reliable operation of all halogen headlights on your vehicle. The smart combination of high-frequency and mains frequency technology also offers you the best possible conditions for any demanding electrotechnical application. If you are interested in our exclusive inverter technology, you can purchase the competitively priced inverter "Victron Phoenix" in our online store.

The Victron Phoenix 12/375 VE.Direct (MPN PIN121371200) is a compact pure sine wave inverter with 300W continuous output. It converts 12V DC from your battery into 230V AC power with a pure sine wave and uncompromising power quality, making it ideal for sensitive electronic devices. The Phoenix boasts excellent efficiency and is one of the best in its class thanks to its ECO mode. Using the VE.Direct communication port and optional accessories, you can connect the device to a computer or smartphone to freely program system parameters, such as low battery shutoff and restart voltages. Additional configuration options include output frequency, output voltage, and a two-pole alarm contact, among other features. The performance of the Phoenix VE.Direct series 250-500 is currently unmatched on the market at its price point, exceeding the capabilities of other devices in the same power class. Technical Features of the Phoenix 12/375 VE.Direct 300 watts of continuous power at 230V 50Hz sine waveCompatible with all standard 12V batteriesDelivers 230V AC power with pure sine wave for excellent power qualityFully programmable on/off voltage thresholdsAdjustable output voltage range from 210 to 245V Technical Highlights of the Phoenix VE.Direct Series 250VA – 500VA VE.Direct port allows connection to a computer (requires VE.Direct to USB interface cable) or smartphone, where you can monitor the device status using the free Victron app (requires VE.Direct Bluetooth Smart Dongle).Fully programmable parameters: thresholds for triggering and resetting alarms due to low battery charge + thresholds for shutting down and restarting at low battery voltage levels + output voltage (210-245V) + frequency (50Hz or 60Hz) + ECO mode on/off thresholds and ECO mode sensor.Integrated ECO mode: In ECO mode, the inverter switches to standby when the load drops below a preset value. In standby mode, the inverter briefly turns on at intervals (default: every 2.5 seconds). If the load exceeds a preset threshold during this time, the inverter remains on. Proven Reliability: The full bridge design with toroidal transformer topology has been proven over years of use. The inverters are short-circuit proof and protected against overheating (caused by overload or ambient temperature).High start-up power: Essential for starting loads such as voltage converters for LED lamps, halogen lamps, or power tools.Remote on/off switch: A remote on/off switch can be connected using a two-pole connector or between the battery's positive terminal and the left contact of the two-pole connector. Scope of Delivery:1x Victron PIN121371200 Phoenix 12/375 12V to 230V 300W 50Hz 60Hz

Victron Phoenix - Eine hochwertige Wechselrichter-Technologie garantiert Ihnen Sinus pur Wechselrichter kommen insbesondere dort zum Einsatz, wo elektrische Systeme Wechselspannung bzw. Wechselstrom für ihren Betrieb benötigen, allerdings hierfür nur eine Gleichspannungsquelle als Stromlieferant (z.B. Autobatterie) zur Verfügung steht.   Die ausgefeilte Inverter-Technologie des Victron Phoenix Wechselrichters wandelt jede anliegende 12V Gleichspannung in eine durchschnittliche 230V Sinusspannung (Wechselspannung von 50 Hertz) um. Der komfortable Inverter liefert Ihnen einen Leistungsbereich zwischen 150 Watt und 3000 Watt pro Modul. Erfreuen Sie sich an der soliden Ausgangsleistung dieses elektrotechnischen Gerätes bei einem äußerst hohen Wirkungsgrad bis zu 99 Prozent.   Ausgesprochene Sicherheit mit einem hohen Einschaltpotenzial Unser Victron Phoenix Wechselrichter arbeitet völlig störungsfrei selbst bei spontanen Kurzschlüssen. Das Gerät ist gleichfalls vor etwaiger Überhitzung (zum Beispiel durch Überlastung) verlässlich geschützt. Eine hohe Einschaltleistung sichert unter anderem den zuverlässigen Betrieb sämtlicher Halogenscheinwerfer an Ihrem Fahrzeug. Die smarte Verbindung von Hochfrequenz- und Netzfrequenztechnologie bietet Ihnen außerdem bestmögliche Voraussetzungen für jede anspruchsvolle elektrotechnische Anwendung.   Wenn Sie sich für unsere exklusive Wechselrichter Technologie interessieren, können Sie den preisgünstigen Inverter "Victron Phoenix" in unserem Online-Shop bestellen.

Der Victron Phoenix 12/500VE.Direct (MPN PIN121501100) ist ein kleiner Sinuswechselrichter mit 400W Dauerleistung. Das Gerät wandelt 12V Gleichspannung aus Ihrer Batterie in 230V AC Wechselstrom um und das mit einer reinen Sinusspannung und kompromissloser Strom-Qualität, die auch für empfindliche Elektronik-Produkte bestens geeignet ist. Der Wirkungsgrad des Phoenix ist hervorragend und dank des ECO-Mode einer der höchsten seiner Klasse. Über den VE.Direct Kommunikationsanschluss können Sie mit optionalen Zubehör, das Gerät mit einem Computer oder dem Smartphone verbinden und einige Systemparameter wie die Ausschaltspannung und Wiedereinschaltspannung bei leerem Akku völlig frei programmieren! Viele weitere Konfigurationsmöglichkeiten wie Ausgangsfrequenz und Ausgangsspannung sowie ein 2-poliger Alarm-Kontakt gehören zu den Leistungsmerkmalen dieses Spannungs-Umformers.Der Leistungsumfang der Phoenix-Serie VE.Direct 250-500 ist für den Preis im Moment einmalig am Markt und geht weit über die Fähigkeiten anderer Geräte der gleichen Leistungsklassen hinaus.technische Merkmale des Phoenix 12/375 VE.Direct 400 Watt Dauerstrom-Leistung bei 230V 50Hz Sinusspannungfür alle gängigen 12V Batterien geeignet230V AC Strom mit reiner Sinuswelle liefert eine perfekte  Stromqualitätfrei programmierbare Ein- und Ausschaltschwellenfrei einstellbare Ausgangsspannung im Bereich von 210 – 245V technische Highlights der Phoenix VE.Direct Serie 250VA – 500VA VE.Direct-Anschluss ermöglicht die Verbindung des Stromwandlers mit einen Computer (VE.Direct zu USB-Interface Kabel benötigt) oder Ihrem Smartphone auf dem Sie mit der kostenlosen Victron App den Status Ihres Gerätes immer im Auge behalten (VE.Direct Bluetooth Smart Dongle erforderlich).Vollständig programmierbare Parameter: Schwellwerte zum Auslösen und Zurücksetzen von Alarmen bei niedrigem Ladezustand der Batterie + Schwellwerte zum Ausschalten und Neustarten bei niedrigen Batteriespannungswerten + Ausgangsspannung 210 - 245V  + Schwellwerte zum Ausschalten und Neustarten bei niedrigen Batteriespannungswerten + Frequenz 50 Hz oder 60 Hz + Schwellwert für ECO-Modus ein/aus und ECO-Modus-Fu¨hlerECO-Modus integriert: Im ECO-Modus schaltet der Wechselrichter auf Standby, sobald die Last unter einen voreingestellten Wert abfällt. Im Standby-Modus schaltet sich der Wechselrichter dann für einen kurzen Zeitraum ein (regulierbare Standardeinstellung: alle 2,5 Sekunden). Überschreitet dabei die Last einen voreingestellten Schwellwert, bleibt der Wechselrichter eingeschaltet. Bewährte Zuverlässigkeit des Stromumwandlers: Die vollständige Überbrückung zusätzlich mit einer Ringtransformatorentopologie hat sich seit Jahren bewährt. Die Wechselrichter sind kurzschlussfest und vor Überhitzung (ob nun durch Überlastung oder durch die Umgebungstemperatur hervorgerufen) geschützt.Hohe Einschaltleistung: Diese wird zum Einschalten von Lasten wie zum Beispiel Spannungsumformern für LED-Lampen, Halogenlampen oder Elektrowerkzeugen benötigt.Ferngesteuerte Ein-/Aus-Schaltung möglich: Ein ferngesteuerter Ein-/Aus-Schalter lässt sich mit einem zweipoligen Stecker oder zwischen den Pluspol der Batterie und dem linken Kontakt des zweipoligen Steckers anschließen.Lieferumfang:1x Victron PIN121501100 Phoenix 12/500 12V auf 230V 400W 50Hz 60Hz