The Orion Tr-Smart DC-DC from Victron Energy (MPN ORI241236140) is a professional, DC to DC adaptive 3-stage charger with integrated Bluetooth, known on the market as a battery-to-battery (B2B) charger. The charge booster is suitable for use in dual battery systems in vehicles or on boats where the alternator and the starter battery are used to charge the service battery. The charger can be used in 12V or 24V systems and is suitable for both lead-acid and lithium batteries. Models up to 400W are available and an unlimited number of units can be connected in parallel to increase the output power. Key features Suitable for Bluetooth SmartFully programmableAdaptive 3-stage charging algorithmRemote on/offShort-circuit proofParallel connection possible to increase the output currentOvertemperature protectionProtection class IP43 Suitable for Bluetooth Smart Monitoring, changing settings and updating the charger with newly available software functions can be carried out with any Bluetooth-enabled smartphone, tablet or other device. Adaptive 3-stage charging algorithm: constant current - constant voltage - conservation With lead batteries, it is important that the charging time is kept short during shallow discharges in order to avoid overcharging the battery. After a deep discharge, the constant voltage period is automatically extended to ensure that the battery is fully charged.For lithium batteries, the recording time is fixed, with a default setting of 2 hours.Alternatively, a fixed output voltage can be selected. Remote on/off A remote on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, connection H (right) of the two-pin plug can be connected to a positive battery terminal or connection L (left) of the two-pin plug can be connected to the negative battery terminal (or to the body of a vehicle, for example). Technical data Input voltage range: 20-35 VNominal output voltage: 12.2 VOutput voltage setting range: 10-15 VOutput voltage tolerance: ±0.2 VCont. Output current at rated output voltage and 40°: 30 ACont. Output power at 40°C: 360 WOperating temperature range: -20°C - +55°CWeight: 1.8 kgDimensions: 130 x 186 x 70 mm Scope of delivery: 1x Victron Energy Orion-Tr Smart DC/DC charging booster 24/12-30A (360W) ORI241236140

The Orion Tr-Smart DC-DC from Victron Energy (MPN ORI241236140) is a professional, DC to DC adaptive 3-stage charger with integrated Bluetooth, known on the market as a battery-to-battery (B2B) charger. The charge booster is suitable for use in dual battery systems in vehicles or on boats where the alternator and the starter battery are used to charge the service battery. The charger can be used in 12V or 24V systems and is suitable for both lead-acid and lithium batteries. Models up to 400W are available and an unlimited number of units can be connected in parallel to increase the output power. Key features Suitable for Bluetooth SmartFully programmableAdaptive 3-stage charging algorithmRemote on/offShort-circuit proofParallel connection possible to increase the output currentOvertemperature protectionProtection class IP43 Suitable for Bluetooth Smart Monitoring, changing settings and updating the charger with newly available software functions can be carried out with any Bluetooth-enabled smartphone, tablet or other device. Adaptive 3-stage charging algorithm: constant current - constant voltage - conservation With lead batteries, it is important that the charging time is kept short during shallow discharges in order to avoid overcharging the battery. After a deep discharge, the constant voltage period is automatically extended to ensure that the battery is fully charged.For lithium batteries, the recording time is fixed, with a default setting of 2 hours.Alternatively, a fixed output voltage can be selected. Remote on/off A remote on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, connection H (right) of the two-pin plug can be connected to a positive battery terminal or connection L (left) of the two-pin plug can be connected to the negative battery terminal (or to the body of a vehicle, for example). Technical data Input voltage range: 20-35 VNominal output voltage: 12.2 VOutput voltage setting range: 10-15 VOutput voltage tolerance: ±0.2 VCont. Output current at rated output voltage and 40°: 30 ACont. Output power at 40°C: 360 WOperating temperature range: -20°C - +55°CWeight: 1.8 kgDimensions: 130 x 186 x 70 mm Scope of delivery: 1x Victron Energy Orion-Tr Smart DC/DC charging booster 24/12-30A (360W) ORI241236140

The Orion Tr-Smart DC-DC from Victron Energy (MPN ORI122436140) is a professional, DC to DC adaptive 3-stage charger with integrated Bluetooth, known on the market as a battery-to-battery (B2B) charger or charge booster. The charge booster is suitable for use in dual battery systems in vehicles or on boats, where the alternator and the starter battery are used to charge the service battery. The charger can be used in 12V or 24V systems and is suitable for both lead-acid and lithium batteries. Models up to 400W are available and an unlimited number of units can be connected in parallel to increase the output power. Key features Suitable for Bluetooth SmartFully programmableAdaptive 3-stage charging algorithmRemote on/offShort-circuit proofParallel connection possible to increase the output currentOvertemperature protectionProtection class IP43 Suitable for Bluetooth Smart Monitoring, changing settings and updating the charger with newly available software functions can be carried out with any Bluetooth-enabled smartphone, tablet or other device. Adaptive 3-stage charging algorithm: constant current - constant voltage - conservation With lead batteries, it is important that the charging time is kept short during shallow discharges in order to avoid overcharging the battery. After a deep discharge, the constant voltage period is automatically extended to ensure that the battery is fully charged.For lithium batteries, the recording time is fixed, with a default setting of 2 hours.Alternatively, a fixed output voltage can be selected. Remote on/off A remote on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, connection H (right) of the two-pin plug can be connected to a positive battery terminal or connection L (left) of the two-pin plug can be connected to the negative battery terminal (or to the body of a vehicle, for example). Technical data Input voltage range: 10-17 VNominal output voltage: 24.2 VOutput voltage setting range: 20-30 VOutput voltage tolerance: ±0.2 VCont. Output current at rated output voltage and 40°: 15 ACont. Output power at 40°C: 360 WOperating temperature range: -20°C - +55°CWeight: 1.8 kgDimensions: 130 x 186 x 70 mm Scope of delivery: 1x Victron Energy Orion-Tr Smart DC/DC charging booster 12/24-15A (360W) ORI122436140

Victron Orion Tr-Smart DC/DC charging booster The Orion-Tr Smart DC/DC charging booster is the smart solution for charging your electric vehicle. The charger from Victron Energy can be used as a charger or as a power supply unit and is particularly suitable for lithium batteries. Suitable for Bluetooth smart and fully programmable Depending on individual requirements, the battery charging algorithm can be freely configured or a fixed output voltage can be used. Thanks to intelligent alternators for Euro5 and Euro6 engines, engine run detection is possible so that the power supply is only active when the engine is running. This prevents unwanted discharge of the starter battery. The Orion-Tr Smart charging booster is equipped with modern Bluetooth technology. This allows the charger to be easily monitored via the smartphone's Bluetooth. Software updates and changes to the settings can also be conveniently controlled from the cell phone. Remote switch-on and switch-off The charger can also be switched on and off remotely using a switch or a relay contact on the two-pin plug. Alternatively, connection H (right) of the plug can be switched to a B positive terminal or connection L (left) to the negative terminal. Constant current, constant voltage, maintenance As the device is primarily suitable for lithium batteries, the preset recording time of two hours can be used for this. With lead batteries, however, it is important to keep the recording time short (shallow discharge) so that the battery does not overcharge. To ensure that the battery is fully charged here too, the constant voltage duration is automatically extended after a deep discharge.

The Orion Tr-Smart DC-DC from Victron Energy is a professional, DC to DC adaptive 3-stage charger with integrated Bluetooth, known on the market as a battery-to-battery (B2B) charger. The charge booster is suitable for use in dual battery systems in vehicles or on boats where the alternator and the starter battery are used to charge the service battery. The charger can be used in 12V or 24V systems and is suitable for both lead-acid and lithium batteries. Models up to 400W are available and an unlimited number of units can be connected in parallel to increase the output power. Key features Suitable for Bluetooth Smart Fully programmable Adaptive 3-stage charging algorithm Remote on/off Short-circuit proof Parallel connection possible to increase the output current Overtemperature protection Protection class IP43 Suitable for Bluetooth Smart Monitoring, changing settings and updating the charger with newly available software functions can be carried out with any Bluetooth-enabled smartphone, tablet or other device. Adaptive 3-stage charging algorithm: constant current - constant voltage - conservation With lead batteries, it is important that the charging time is kept short during shallow discharges in order to avoid overcharging the battery. After a deep discharge, the constant voltage period is automatically extended to ensure that the battery is fully charged. For lithium batteries, the recording time is fixed, with a default setting of 2 hours. Alternatively, a fixed output voltage can be selected. Remote on/off A remote on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, connection H (right) of the two-pin plug can be connected to a positive battery terminal or connection L (left) of the two-pin plug can be connected to the negative battery terminal (or to the body of a vehicle, for example). Technical data 12/12-30A (technical data for other models can be found in the Downloads section) Input voltage range: 10-17 V Nominal output voltage: 12.2 V Output voltage setting range: 10-15 V Output voltage tolerance: ±0.2 V Cont. Output current at rated output voltage and 40°: 30 A Cont. Output power at 40°C: 360 W Operating temperature range: -20°C - +55°C Weight: 1.8 kg Dimensions: 130 x 186 x 70 mm Scope of delivery: 1x Victron Energy Orion-Tr Smart DC/DC charging booster

The Orion-Tr Smart 24/24-17A from Victron Energy (MPN ORI242440120) is a galvanically isolated DC-DC converter and charger. It is suitable for use in dual battery systems in vehicles or on boats where the (intelligent) alternator and the starter battery are to be used to charge the service battery. The charger can be used in 12V or 24V systems and is suitable for both lead-acid and lithium batteries. An unlimited number of devices can be connected in parallel to increase the output power. Thanks to the Orion-Tr Smart 24/24-17A, you can supply every 24V consumer with exactly the right voltage. The correct voltage is guaranteed even with longer cables, as the Orion can adapt the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Integrated Bluetooth, fully programmable Monitoring, changing settings and updating the charger with newly available software functions can be done with any Bluetooth-enabled smartphone, tablet or other device. The Orion-Tr Smart can be programmed via a configurable battery charging algorithm or a fixed output. It also has intelligent generator compatibility - engine run detection. Features of the Orion-Tr Smart 24/24-17A 400W (galvanically isolated) Victron Energy part number: ORI242440120 for 24 V battery voltage, adjustable output voltage 20-30 V max. 360 W output power with a maximum current of 17 A wide input voltage range: 20-35 V protection class IP43, galvanic isolation 200 VDC between input, output and housing can be connected in parallel with any number of identical devices to increase the output power Can be used for buffer charging batteries Remote-controlled on/off switch Intelligent generator compatibility: engine run detection Adaptive 3-stage charging algorithm: constant current - constant voltage - conservation With lead batteries, it is important that the charging time is kept short during shallow discharges in order to avoid overcharging the battery. After a deep discharge, the constant voltage period is automatically extended to ensure that the battery is fully charged. For lithium batteries, the charging time is fixed, with a default setting of 2 hours. Alternatively, a fixed output voltage can be selected. Remote on/off switch A remote-controlled on/off switch or a relay contact can be connected to the two-pin plug. Alternatively, connection H (right) of the two-pin plug can be connected to a positive battery terminal or connection L (left) of the two-pin plug can be connected to the negative battery terminal (or to the body of a vehicle, for example). Scope of delivery: 1x Victron Energy ORI242440120 Orion-Tr Smart 24/24-17A 400 W DC-DC converter1x instruction manual

Victron Orion Tr-Smart DC/DC charging booster The Orion-Tr Smart DC/DC charging booster is the smart solution for charging your electric vehicle. The charger from Victron Energy can be used as a charger or as a power supply unit and is particularly suitable for lithium batteries. Suitable for Bluetooth smart and fully programmable Depending on individual requirements, the battery charging algorithm can be freely configured or a fixed output voltage can be used. Thanks to intelligent alternators for Euro5 and Euro6 engines, engine run detection is possible so that the power supply is only active when the engine is running. This prevents unwanted discharge of the starter battery. The Orion-Tr Smart charging booster is equipped with modern Bluetooth technology. This allows the charger to be easily monitored via the smartphone's Bluetooth. Software updates and changes to the settings can also be conveniently controlled from the cell phone. Remote switch-on and switch-off The charger can also be switched on and off remotely using a switch or a relay contact on the two-pin plug. Alternatively, connection H (right) of the plug can be switched to a B positive terminal or connection L (left) to the negative terminal. Constant current, constant voltage, maintenance As the device is primarily suitable for lithium batteries, the preset recording time of two hours can be used for this. With lead batteries, however, it is important to keep the recording time short (shallow discharge) so that the battery does not overcharge. To ensure that the battery is fully charged here too, the constant voltage duration is automatically extended after a deep discharge.

Victron Orion Tr-Smart DC/DC charging booster The Orion-Tr Smart DC/DC charging booster is the smart solution for charging your electric vehicle. The charger from Victron Energy can be used as a charger or as a power supply unit and is particularly suitable for lithium batteries. Suitable for Bluetooth smart and fully programmable Depending on individual requirements, the battery charging algorithm can be freely configured or a fixed output voltage can be used. Thanks to intelligent alternators for Euro5 and Euro6 engines, engine run detection is possible so that the power supply is only active when the engine is running. This prevents unwanted discharge of the starter battery. The Orion-Tr Smart charging booster is equipped with modern Bluetooth technology. This allows the charger to be easily monitored via the smartphone's Bluetooth. Software updates and changes to the settings can also be conveniently controlled from the cell phone. Remote switch-on and switch-off The charger can also be switched on and off remotely using a switch or a relay contact on the two-pin plug. Alternatively, connection H (right) of the plug can be switched to a B positive terminal or connection L (left) to the negative terminal. Constant current, constant voltage, maintenance As the device is primarily suitable for lithium batteries, the preset recording time of two hours can be used for this. With lead batteries, however, it is important to keep the recording time short (shallow discharge) so that the battery does not overcharge. To ensure that the battery is fully charged here too, the constant voltage duration is automatically extended after a deep discharge.

Victron Orion Tr-Smart DC/DC charging booster The Orion-Tr Smart DC/DC charging booster is the smart solution for charging your electric vehicle. The charger from Victron Energy can be used as a charger or as a power supply unit and is particularly suitable for lithium batteries. Suitable for Bluetooth smart and fully programmable Depending on individual requirements, the battery charging algorithm can be freely configured or a fixed output voltage can be used. Thanks to intelligent alternators for Euro5 and Euro6 engines, engine run detection is possible so that the power supply is only active when the engine is running. This prevents unwanted discharge of the starter battery. The Orion-Tr Smart charging booster is equipped with modern Bluetooth technology. This allows the charger to be easily monitored via the smartphone's Bluetooth. Software updates and changes to the settings can also be conveniently controlled from the cell phone. Remote switch-on and switch-off The charger can also be switched on and off remotely using a switch or a relay contact on the two-pin plug. Alternatively, connection H (right) of the plug can be switched to a B positive terminal or connection L (left) to the negative terminal. Constant current, constant voltage, maintenance As the device is primarily suitable for lithium batteries, the preset recording time of two hours can be used for this. With lead batteries, however, it is important to keep the recording time short (shallow discharge) so that the battery does not overcharge. To ensure that the battery is fully charged here too, the constant voltage duration is automatically extended after a deep discharge.

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

The Blue Smart ip22 12/30(3) charger from Victron Energy (mpn BPC123044002), is a professional, compact 12v 30a battery charger of the latest generation with 3 charging outputs and built-in Bluetooth! The Blue Smart ip22 12/30(3) charger can be used with equipment in your workshop or with motor vehicles such as with (classic) cars, motorcycles, boats and motorhomes and charges both classic 12v lead batteries and modern lithium batteries. It offers Highlights of the 12/30(3) Blue Smart ip22 Charger intelligent charging, until the perfect battery condition.... The seven-stage charging algorithm gets the most out of your battery. The charger provides the battery with the energy it needs, keeps it in a healthy state, ensures better performance... and a longer life Restoring deep-discharged "dead" batteries Unlike most other brands and product lines, the Blue Smart ip22 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is present between the battery terminals. Retrieving battery status remotely, with the VictronConnect app The Blue Smart ip22 12/30(3) charger has built-in Bluetooth. This allows the status of the charger and battery to be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect App the main technical features of the 12/30(3) Blue Smart ip22 Charger Victron Part number: bpc123044002charges 12v lead acid, gel, agm and lithium batteries30a maximum charge current3 battery charging outputsvery compact dimensions: 235 x 108 x 65mmhighly advanced, seven-stage charging algorithmwith integrated Bluetooth for use with the free VictronConnect app other features of the 12/30(3) Blue Smart ip22 battery charger trend-setting efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, about five to ten times better than the industry standard. adaptive 7-stage charging algorithm The 12/30(3) Blue Smart charger features microprocessor-controlled "adaptive" battery management. "Adaptive" means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is at rest Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2v for a 12v battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Scope of delivery: 1x Victron Energy BPC123044002 12/30(3) ip22 Blue Smart Charger 1x instruction manual