Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

The Orion-Tr 12/12-30 from Victron Energy (MPN ORI121240110) is a galvanically isolated DC-DC voltage converter and ensures a regulated DC voltage and therefore trouble-free operation of your DC loads. The compact Orion-TR DC-DC voltage converter converts the DC input voltage (10-17V) into an adjustable 12V output voltage (10-15V) and supplies a constant continuous current of 30A, which corresponds to an output of 360W. Thanks to the Orion-Tr 12/12-30, you can supply any 12V consumer with exactly the right voltage. The correct voltage is guaranteed even with longer cables, as the Orion can adapt the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 12/12-30 can be connected in parallel with identical devices and has a remote-controlled on/off switch. Thanks to the adjustable output voltage, this model can also be used as a battery charger. Important features of the Orion-Tr 12/12-30 360W (with galvanic isolation) Victron Energy part number: ORI121240110for 12V battery voltage, adjustable output voltage 10-15Vmax. 360W output power with a maximum current of 30Awide input voltage range: 10-17Vprotection class IP43, galvanic isolation 200V DC between input, output and housingcan be connected in parallel with similar devices to increase performancecan be used for buffer charging of batteriesRemote-controlled on/off switchwide input voltage range: 10-17Vhigh efficiency of 87Can also be used as a battery charger thanks to adjustable output voltageThanks to the adjustable output voltage, the Orion-Tr 12/12-30 can also be used to charge a battery. Remote-controlled on/off switch The remote-controlled on/off connection eliminates the need for a high-current switch in the input cabling. The remote on/off connection can be controlled with a power saving switch or by the run/stop switch of the motor (see manual). Scope of delivery: 1x Victron Energy ORI121240110 Orion-Tr 12/12-30 30A 360W 1x operating instructions (German)

The Victron Orion-Tr 24/12-20 240W DC DC converter - non-isolated (MPN ORI241220200) ensures a regulated DC voltage and therefore trouble-free operation of your electronic DC consumers. The 24/12 converts 24V DC to 12V DC and delivers a constant continuous current of 20A which corresponds to a power of 240W. It provides a clean 12V output voltage and compensates for any line losses and battery voltage fluctuations. Important features of the Orion-Tr 24/12 20A 240W 24V DC operating voltage, 12V DC output voltagewide input voltage range: 18V - 35V240W power at 5 A continuous currentEfficiency: 95%Connection: screw terminals max 6 mm² AWG10Version not insulated Scope of delivery:1x Victron ORI241220200 Orion 24/12-20 DC DC converter 24V to 12V 20A 240W

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: When the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 volt

The Victron Orion-Tr 24/12-15 180W DC DC converter - non-isolated (MPN ORI241215200R) ensures a regulated DC voltage and therefore trouble-free operation of your electronic DC consumers. The 24/12 converts 24V DC to 12V DC and delivers a constant continuous current of 15A which corresponds to a power of 180W. It provides a clean 12V output voltage and compensates for any line losses and battery voltage fluctuations. Important features of the Orion-Tr 24/12 15A 180W 24V DC operating voltage, 12V DC output voltagewide input voltage range: 18V - 35V180W power at 5 A continuous currentEfficiency: 95%Connection: screw terminals max 6 mm² AWG10Version not insulated Scope of delivery:1x Victron ORI241215200R Orion 24/12-15 DC DC converter 24V to 12V 15A 180W

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

The Victron Orion 24/12-10 120W (MPN ORI241210200R) DC DC converter ensures a regulated DC voltage and therefore trouble-free operation of your electronic DC consumers. The 24/12 converts 24V direct current into 12V direct current and supplies a constant continuous current of 10A, which corresponds to an output of 120W. It provides a clean 12V output voltage and compensates for any line losses and battery voltage fluctuations. Important features of the Orion-Tr 24/12 10A 120W 24V DC operating voltage, 12V DC output voltage Wide input voltage range: 18V - 36V 120W power at 10A continuous current Non-isolated version Scope of delivery:1x Victron ORI241210200R Orion 24/12-10 DC DC converter 24V to 12V 10A 120W

Remote on/off switchThe remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: can also be used as a battery charger, for example to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation.

The Victron Orion 24/12-70 (MPN ORI241270020) is a modern DC-DC converter and ensures a regulated DC voltage and therefore trouble-free operation of your DC consumers. The 24/12-70 converts 24V direct current into 12V direct current and delivers a constant continuous current of 70A, which corresponds to an output of 840W. In contrast to its smaller siblings, the output voltage of this model can be regulated via a potentiometer on the device. The adjustable output voltage range is 10-15V. The 24/12-70 can also be used to buffer charge your battery and can be connected in parallel with identical devices to increase the output current. Important features of the Orion 24/12-70 840W 24V DC operating voltage, adjustable output voltage 10-15Vcan be connected in parallel with similar devices to increase output powercan be used for buffer chargingcan be remote controlledtemperature-controlled housing ventilationwide input voltage range: 18V - 36V840W power at 70A continuous currentmax. 70A output currenthigh efficiency of 92%only 0.9 KG weight DC-DC direct current converters from the Orion family generate a clean 12V output voltage and compensate for any line losses and fluctuations in the battery voltage. Remote on/off connection on the high-performance models (see table below) The remote on/off connection eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled with a power saving switch or by the run/stop switch of the motor (see manual). Can be used as a battery charger for any type of battery thanks to the adjustable output voltage For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. Can be connected in parallel to increase the output current Up to five identical devices can be connected in parallel. Scope of delivery: 1x Victron ORI241270020 Orion 24/12-70 DC DC converter 24V to 12V 70A 840W

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

The Victron Orion 24/12-5 60W (MPN ORI241205200R) DC DC converter ensures a regulated DC voltage and therefore trouble-free operation of your electronic DC consumers. The 24/12 converts 24V direct current into 12V direct current and supplies a constant continuous current of 5A, which corresponds to an output of 60W. It provides a clean 12V output voltage and compensates for any line losses and battery voltage fluctuations. Important features of the Orion-Tr 24/12 5A 60W 24V DC operating voltage, 12V DC output voltagewide input voltage range: 18V - 35V60W power at 5 A continuous currentEfficiency: 95%Connection: screw terminals (max. 3.3 mm²)Version not insulated Scope of delivery:1x Victron ORI241205200R Orion 24/12-05 DC DC converter 24V to 12V 5A 60W

Remote on/off switchThe remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: can also be used as a battery charger, for example to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation.

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models:Orion-Tr Smart 12/12 18 A DC-DC charging booster isolated Fully encapsulated: waterproof, shockproof and fire retardant Water, oil or dirt cannot damage the Orion IP67 DC-DC converter. The housing is made of cast aluminum and the electronics are coated with resin. Extra-long input and output cables Thanks to the 1.8 m long cables, no additional extension cables are required in most cases. This supports safe operation in an area where IP67 protection is required. Wide input voltage range With an input voltage range of 15 to 40 volts, a stable output is guaranteed during voltage surges or undervoltages caused by other devices connected to the same battery Overheating protection Can be used in a hot environment such as an engine room 12 / 24 / 48 volts

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote-controlled on/off connection The remote-controlled on/off connection eliminates the need for a high-current switch in the input wiring. necessary. The remote on/off connection can be controlled with a power saving switch or by the motor's run/stop switch (see manual). Run/Stop switch of the motor (see manual). All models with an adjustable output can also be used as a battery charger. For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models with adjustable output can be connected in parallel to increase the output current. Up to five devices can be connected in parallel. Simple installation: The scope of delivery includes 4 insulated blade terminals with 6.3 mm crimp socket.

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

This VOTRONIC DCDC series DC/DC converter enables safe operation of 24V consumers on 12V vehicle electrical systems without the need for a separate battery system.The devices can be operated for short periods with up to 30% overload, so that inrush, peak and starting currents of the various consumers are also absorbed.Galvanic insulation is installed between the input and output sides to protect against voltage breakdowns, defective earth cables and the like. This ensures perfect, independent earthing conditions on both sides even with long connection cables, which is useful for large vehicles, containers, roller containers, trailers etc., for example.After activating the DC/DC converter at the ON/OFF control input, which can be done either by a switching signal, vehicle ignition or D+, the voltage monitoring of the battery is also ready for operation (charge detection on the starter battery, undervoltage cut-off).Output voltage:It is stabilized and smoothed and therefore ideally suited even for sensitive consumers. The output voltage can be optionally set to three fixed, stabilized output voltages.In the fourth switch position, the level of the input voltage at the output is variably adjusted.In this operating mode, it is also advantageous to operate consumers that obtain additional information from the (12V or 24V) operating voltage, e.g. starter battery is being charged, driving or standby mode, automatic switch-off in the event of undervoltage and battery discharge (small appliances, charging trays, lamps), etc.Device characteristics: The output voltage is stabilized, free of peaks, smoothed and filtered. Galvanic isolation between input and output: - Absolute isolation of the loads and the battery circuit, even in the event of a fault. This is a particularly important feature, e.g. when operating 12V consumers from a higher 24V system voltage:- No destruction of e.g. 12V consumers in the event of overvoltage due to 24V breakdowns.- No overvoltage at the output and thus protection of the loads in the event of loss of the earth line.- Clean, undisturbed earth conditions even with long supply cables.- Stable operating voltage on site in mobile operation, e.g. containers, trailers, roller containers, etc.- Filtering and suppression of interference from the input to the output side. Fully automatic continuous operation: The DC/DC converter can be permanently connected to the battery and the loads and operates manually or automatically according to the set specifications. Monitoring-free operation: Multiple protection against overload, overheating, overvoltage, short circuit, malfunction and battery deep discharge through electronic regulation up to complete switch-off by built-in safety switches. Supply cable compensation: Voltage losses on the cables are taken into account. Built-in on-board mains filter: Problem-free parallel operation with solar systems, wind and petrol generators, mains chargers etc. on one battery. Scope of delivery:DCDC 1224-25 DC/DC converter, operating instructions

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

The Orion-Tr Smart 24/24-17A from Victron Energy (MPN ORI242440120) is a galvanically isolated DC-DC converter and charger. It is suitable for use in dual battery systems in vehicles or on boats where the (intelligent) alternator and the starter battery are to be used to charge the service battery. The charger can be used in 12V or 24V systems and is suitable for both lead-acid and lithium batteries. An unlimited number of devices can be connected in parallel to increase the output power. Thanks to the Orion-Tr Smart 24/24-17A, you can supply every 24V consumer with exactly the right voltage. The correct voltage is guaranteed even with longer cables, as the Orion can adapt the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Integrated Bluetooth, fully programmable Monitoring, changing settings and updating the charger with newly available software functions can be done with any Bluetooth-enabled smartphone, tablet or other device. The Orion-Tr Smart can be programmed via a configurable battery charging algorithm or a fixed output. It also has intelligent generator compatibility - engine run detection. Features of the Orion-Tr Smart 24/24-17A 400W (galvanically isolated) Victron Energy part number: ORI242440120 for 24 V battery voltage, adjustable output voltage 20-30 V max. 360 W output power with a maximum current of 17 A wide input voltage range: 20-35 V protection class IP43, galvanic isolation 200 VDC between input, output and housing can be connected in parallel with any number of identical devices to increase the output power Can be used for buffer charging batteries Remote-controlled on/off switch Intelligent generator compatibility: engine run detection Adaptive 3-stage charging algorithm: constant current - constant voltage - conservation With lead batteries, it is important that the charging time is kept short during shallow discharges in order to avoid overcharging the battery. After a deep discharge, the constant voltage period is automatically extended to ensure that the battery is fully charged. For lithium batteries, the charging time is fixed, with a default setting of 2 hours. Alternatively, a fixed output voltage can be selected. Remote on/off switch A remote-controlled on/off switch or a relay contact can be connected to the two-pin plug. Alternatively, connection H (right) of the two-pin plug can be connected to a positive battery terminal or connection L (left) of the two-pin plug can be connected to the negative battery terminal (or to the body of a vehicle, for example). Scope of delivery: 1x Victron Energy ORI242440120 Orion-Tr Smart 24/24-17A 400 W DC-DC converter1x instruction manual

Input: 6 - 14 V/DC, output: 11 - 26 V/DCThis electronically regulated DC/DC converter generates almost twice as high an output voltage from a low input voltage. The output voltage decreases with higher loads. With an additional potentiometer of 4.7 k lin. the output voltage can be limited upwards at input voltages of over 10 V.

For operating 12 V/DC devices on a 24 V/DC truck or boat battery. Short-circuit-proof, vibration-proof module. Important installation instructions, please note!

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Paco PV2412-50 24V to 12V 50A voltage converter

Paco PV2412-6 24V to 12V 6A voltage converter

Paco PV2412-10 24V to 12V 10A voltage converter

Paco PV2412-20 24V to 12V 20A voltage converter

Paco PV2412-30 24V to 12V 30A voltage converter

Remote on/off switch The remote on/off switch eliminates the need for a high-current switch on the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual). Adjustable output voltage: Can also be used as a battery charger For example, to charge a 12 V starter or auxiliary battery in an otherwise 24 V system. All models are short-circuit-proof and can be connected in parallel to increase the output current. An unlimited number of devices can be connected in parallel. IP43 protection: If the device is installed with the screw terminals facing downwards. Screw terminals: No special tools are required for installation. Input fuse: Only on the 12 V and 24 V models Models: 12 / 24 / 48 Volt

Paco PV2412-20 24V to 12V 20A voltage converter

Paco PV2412-50 24V to 12V 50A voltage converter

Paco PV2412-40 24V to 12V 40A voltage converter

Paco PV2412-6 24V to 12V 6A voltage converter

Paco PV2412-10 24V to 12V 10A voltage converter

Paco PV2412-30 24V to 12V 30A voltage converter

Victron Orion Tr-Smart DC/DC charging booster The Orion-Tr Smart DC/DC charging booster is the smart solution for charging your electric vehicle. The charger from Victron Energy can be used as a charger or as a power supply unit and is particularly suitable for lithium batteries. Suitable for Bluetooth smart and fully programmable Depending on individual requirements, the battery charging algorithm can be freely configured or a fixed output voltage can be used. Thanks to intelligent alternators for Euro5 and Euro6 engines, engine run detection is possible so that the power supply is only active when the engine is running. This prevents unwanted discharge of the starter battery. The Orion-Tr Smart charging booster is equipped with modern Bluetooth technology. This allows the charger to be easily monitored via the smartphone's Bluetooth. Software updates and changes to the settings can also be conveniently controlled from the cell phone. Remote switch-on and switch-off The charger can also be switched on and off remotely using a switch or a relay contact on the two-pin plug. Alternatively, connection H (right) of the plug can be switched to a B positive terminal or connection L (left) to the negative terminal. Constant current, constant voltage, maintenance As the device is primarily suitable for lithium batteries, the preset recording time of two hours can be used for this. With lead batteries, however, it is important to keep the recording time short (shallow discharge) so that the battery does not overcharge. To ensure that the battery is fully charged here too, the constant voltage duration is automatically extended after a deep discharge.

Victron Orion Tr-Smart DC/DC charging booster The Orion-Tr Smart DC/DC charging booster is the smart solution for charging your electric vehicle. The charger from Victron Energy can be used as a charger or as a power supply unit and is particularly suitable for lithium batteries. Suitable for Bluetooth smart and fully programmable Depending on individual requirements, the battery charging algorithm can be freely configured or a fixed output voltage can be used. Thanks to intelligent alternators for Euro5 and Euro6 engines, engine run detection is possible so that the power supply is only active when the engine is running. This prevents unwanted discharge of the starter battery. The Orion-Tr Smart charging booster is equipped with modern Bluetooth technology. This allows the charger to be easily monitored via the smartphone's Bluetooth. Software updates and changes to the settings can also be conveniently controlled from the cell phone. Remote switch-on and switch-off The charger can also be switched on and off remotely using a switch or a relay contact on the two-pin plug. Alternatively, connection H (right) of the plug can be switched to a B positive terminal or connection L (left) to the negative terminal. Constant current, constant voltage, maintenance As the device is primarily suitable for lithium batteries, the preset recording time of two hours can be used for this. With lead batteries, however, it is important to keep the recording time short (shallow discharge) so that the battery does not overcharge. To ensure that the battery is fully charged here too, the constant voltage duration is automatically extended after a deep discharge.

The Orion Tr-Smart DC-DC from Victron Energy is a professional, DC to DC adaptive 3-stage charger with integrated Bluetooth, known on the market as a battery-to-battery (B2B) charger. The charge booster is suitable for use in dual battery systems in vehicles or on boats where the alternator and the starter battery are used to charge the service battery. The charger can be used in 12V or 24V systems and is suitable for both lead-acid and lithium batteries. Models up to 400W are available and an unlimited number of units can be connected in parallel to increase the output power. Key features Suitable for Bluetooth Smart Fully programmable Adaptive 3-stage charging algorithm Remote on/off Short-circuit proof Parallel connection possible to increase the output current Overtemperature protection Protection class IP43 Suitable for Bluetooth Smart Monitoring, changing settings and updating the charger with newly available software functions can be carried out with any Bluetooth-enabled smartphone, tablet or other device. Adaptive 3-stage charging algorithm: constant current - constant voltage - conservation With lead batteries, it is important that the charging time is kept short during shallow discharges in order to avoid overcharging the battery. After a deep discharge, the constant voltage period is automatically extended to ensure that the battery is fully charged. For lithium batteries, the recording time is fixed, with a default setting of 2 hours. Alternatively, a fixed output voltage can be selected. Remote on/off A remote on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, connection H (right) of the two-pin plug can be connected to a positive battery terminal or connection L (left) of the two-pin plug can be connected to the negative battery terminal (or to the body of a vehicle, for example). Technical data 12/12-30A (technical data for other models can be found in the Downloads section) Input voltage range: 10-17 V Nominal output voltage: 12.2 V Output voltage setting range: 10-15 V Output voltage tolerance: ±0.2 V Cont. Output current at rated output voltage and 40°: 30 A Cont. Output power at 40°C: 360 W Operating temperature range: -20°C - +55°C Weight: 1.8 kg Dimensions: 130 x 186 x 70 mm Scope of delivery: 1x Victron Energy Orion-Tr Smart DC/DC charging booster