Victron Energy MIDI-Sicherungshalter - CIP000050001
Product information "Victron Energy MIDI-Sicherungshalter - CIP000050001"
Der MIDI-Fuse Sicherung Halter von Victron Energy (MPN CIP000050001) mit Deckel dient der sicheren Installation von DC MIDI-Fuse Streifensicherungen. Das Gehäuse bietet einen soliden Schutz der Sicherung. Sicherungen vom TYP MIDI-Fuse zählen zu den Streifensicherungen und werden am Halter verschraubt. Entsprechende Muttern und Sprengringe sind am Halter bereits vormontiert.
wichtige Artikelmerkmale im Überblick:
- 200A maximale Strom bei max. 58V DC
- für Sicherungen vom Typ MIDI-Fuse
- hochfestes Kunststoff gehäuse, komplett mit Sicherungsringen und Muttern zur Installation Ihrer Sicherung
- entspricht der Norm IEC 60947-3: 1999 + A1: 2001 + A2: 2005 in Verbindung mit IEC 60947-1: 2004
Hinweise: Im Lieferumfang ist nur der Halter wie abgebildet enthalten, die Sicherungen müssen separat erworben werden.
Lieferumfang:
1x Victron CIP000050001 MIDI-FUSE Sicherung Halter
| Absicherung: | 60 - 200A |
|---|---|
| Artikelgewicht: | 0.1 Kg |
| Artikelnummer: | MS-2 |
| Batteriespannung: | bis 58V |
| Dimensions (L x W x H): | 52 x 30 x 25 mm |
| EAN: | 8719076021681 |
| Hole spacing: | 30 mm |
| Sicherungs Typ: | Midi |
Login
Zubehör
AUPROTEC MEGA fuse 80A - 500A max. 32V
AUPROTEC Mega high-current fuse according to ISO 8820-5 / M8 current rating 80A - 500A, rated voltage 32 V/DC Quality fuses made in Germany - with plastic insulating body to prevent sparking when the fuse is triggered No deformation and high contact reliability thanks to reinforced material on the drill holes Automotive high-current screw-in fuse for cars, trucks, construction vehicles, agricultural machinery, buses + motorhomes Cable cross-section Fuse 4 mm² 30 A 6 mm² 40 A 10 mm² 80 A 16 mm² 100 A 25 mm² 150 A 35 mm² 200 A 50 mm² from 250 A up to 300 A
€13.00*
Ähnliche Artikel
Voltima Mega fuse holder, black, 126x37.5x43.5 mm (M8)
Fuse holder for a mega power fuse M8 threaded bolts and hexagon nuts Dimensions: 126x37.5x43.5mm Splash-proof Mega power fuse NOT included in the scope of delivery Model number : VMEGA-1
€3.96*
Votronic 2218 High-load fuse holder with cover for automotive screw-in fuses (MIDI fuses)
Fully insulated fuse holder for high-load fuses (automotive screw-in fuses, also known as MIDI fuses) for protecting large loads or high-load circuits. The fuse holder can be bayed and is equipped with M5 threaded bolts on both sides. Technical data: Dimensions: 61 x 30 x 25 mm Thread type: M5 Note: Supplied without automotive screw-in fuse
€13.26*
Voltima MIDI fuse holder 1-fold holder max. 200A
The screw-type MIDI fuse holder from Voltima is used for the secure installation of DC MIDI fuses. The eyelets of the cable ends can be placed directly on the threaded bolts and screwed tight. This guarantees a firm and permanent connection, preventing voltage drop as far as possible. The housing with matching cover provides solid protection. MIDI-Fuse type fuses are strip fuses and are screwed directly to the holder. The corresponding nuts and snap rings are already pre-assembled on the holder. Features For 1 fuse Max. 200A current Max. 58V DC voltage For MIDI fuse type fuses High-strength plastic housing Required retaining rings and nuts included Note : Only the holder is included in the scope of delivery, the fuses must be purchased separately. Scope of delivery: 1x Voltima MIDI fuse holder, single
€9.00*
Voltima MIDI fuse holder 1-fold holder max. 200A
The screw-type MIDI fuse holder from Voltima is used for the secure installation of DC MIDI fuses. The eyelets of the cable ends can be placed directly on the threaded bolts and screwed tight. This guarantees a firm and permanent connection, preventing voltage drop as far as possible. The housing with matching cover provides solid protection. MIDI-Fuse type fuses are strip fuses and are screwed directly to the holder. The corresponding nuts and snap rings are already pre-assembled on the holder. Features For 1 fuse Max. 200A current Max. 58V DC voltage For MIDI fuse type fuses High-strength plastic housing Required retaining rings and nuts included Note : Only the holder is included in the scope of delivery, the fuses must be purchased separately. Scope of delivery: 1x Voltima MIDI fuse holder, single
€2.14*