The Votronic 5543 tank electrode 12-24 K is a universally applicable tank sensor for measuring the tank level. The tank electrode 12-24 K is suitable for service water and waste water tanks as well as for fresh water tanks. Thanks to the use of appropriate materials, these tank sensors also comply with the DIN 2001-2 drinking water regulations and are designed for tanks with a height of between 12 and 24 cm.Another special feature is that the tank electrodes can be mounted on the top of the tank from the inside as well as from the outside. In the case of fresh water tanks, they can even be installed on the underside of the tank. .Key product features of the 12-24 K tank electrode Rod electrode, easy to shorten to tank height For tanks with a height between 12 and 24 cm Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 m Connection cable 75 cm long Simple adjustment to the specified tank height Linear, stepless signal of the fill level Test mark: E-test (EMC/vehicle directive) Suitable for 12V and 24V continuous operation Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic gauges: Fresh water tank gauge S, 5311 Waste water indicator S, 5313 Holding tank indicator S, 5315 Info Panel Pro, 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery:1x Votronic 5543 12-24 K tank sensor1x mounting material consisting of sealing ring, union nut PG 29, connection cable 75 cm1x operating instructions

The fresh water tank gauge S from Votronic (MPN 5311) was designed for precise level measurement and can be used for all tank materials and tank sizes. The tank level is visualized via a 3-colour scalar, which is displayed on 10 LEDs, each representing 10% of the tank content. The display works continuously, as intermediate levels are displayed with variable brightness and therefore trends can be recognized immediately.The fresh water tank display S is designed as a panel version to match the VOTRONIC modular system and fits in perfectly with other VOTRONIC display units (uniform height 85 mm). Of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of just 18 mm allow installation in almost any location. The indicator is protected against reverse polarity and overload and is easy to connect via screw terminals on the back of the device.Key product features of the fresh water tank indicator S, 5311 Suitable for 12V and 24V DC operating voltage Low current consumption: only 1 - 30 mA Test mark: E-test, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimensions: 29 x 63 x 18 mm Can be switched on and off at the touch of a button High display resolution of the tank level thanks to 10-stage display Suitable for the Votronic module system Can also be operated with 2 tank sensorsThe display units can also be assigned to 2 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for switching, e.g. switch panel 16 A S art. no. 1289 or switch panel 2x16 A S art. no. 1291Compatible with many Votronic tank sensors Tank electrode 12-24 K, 5543 Tank electrode 15-50 K, 5545 Tank electrode 20 K-WC, 5555 Tank sensor FL, 5530 Tank sensor 30-110 K-FL, 5551 Scope of delivery:1x Votronic 5311 fresh water tank display S1x set of fixing screws1x drilling template1x Operating instructions

The Votronic waste tank indicator S (MPN 5315) was designed for precise level measurement and can be used for all tank materials and tank sizes. The tank level is visualized via a 3-colour scale, which is displayed on 10 LEDs, each representing 10% of the tank content. The display works continuously, as intermediate levels are displayed with variable brightness and therefore trends can be recognized immediately.The waste holding tank display Tank display S is designed as a panel version to match the VOTRONIC modular system and fits in perfectly with other VOTRONIC display units (uniform height 85 mm). Of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of just 18 mm allow installation in almost any location. The indicator is protected against reverse polarity and overload and is easy to connect via screw terminals on the back of the device.Key product features of the waste tank indicator S, 5315 Suitable for 12V and 24V DC operating voltage Low current consumption: only 1 - 30 mA Test mark: E-test, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimensions: 29 x 63 x 18 mm Can be switched on and off at the touch of a button High display resolution of the tank level thanks to 10-stage display Suitable for the Votronic module system Can also be operated with 2 tank sensorsThe display units can also be assigned to 2 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for switching, e.g. switch panel 16 A S art. no. 1289 or switch panel 2x16 A S art. no. 1291Compatible with many Votronic tank sensors Tank electrode 12-24 K, 5543 Tank electrode 15-50 K, 5545 Tank electrode 20 K-WC, 5555 Tank sensor FL, 5530 Tank sensor 30-110 K-FL, 5551 Scope of delivery:1x Votronic 5315 holding tank display S1x set of fixing screws1x drilling template1x operating instructions

The Votronic 5551 tank electrode 30-110 K-FL is a universally applicable tank sensor for measuring the tank level of drinking or fresh water tanks. The tank electrode 30-110 K-FL is suitable for both waste water tanks and fresh water tanks. Thanks to the use of appropriate materials, these tank sensors also comply with the DIN 2001-2 drinking water regulations. The tank sensor is designed for high tanks with a height of between 30 and 110 cm.Another special feature is that the tank electrodes can be mounted on the top of the tank from the inside as well as from the outside. In the case of fresh water tanks, they can even be mounted on the underside of the tank.Key product features of the 30-110 K-FL tank electrode Permissible operating voltage: 12V and 24V DC for installation on the top of the tank Suitable for drinking water and waste water tanks Flexible cable probe, easy to shorten to tank height Linear, stepless signal of the fill level Test mark: E-test (EMC/vehicle directive) Complies with DIN standard 2001-2 from the Drinking Water Ordinance Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 mm Connection cable 75 cm long For plastic tanks: wall thickness max. 8 mm Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic gauges: Fresh water tank gauge S, 5311 Waste water gauge S, 5313 Holding tank indicator S, 5315 Info Panel Pro 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery:1x Votronic 5551 30-110 K-FL tank sensor1x Flexible cable probe, sealing ring, union nut PG 291x operating instructions

The Votronic waste water tank gauge S (MPN 5313) was designed for precise level measurement and can be used for all tank materials and tank sizes. The tank level is visualized via a 3-colour scale, which is displayed on 10 LEDs, each representing 10% of the tank content. The display works continuously, as intermediate levels are displayed with variable brightness and therefore trends can be recognized immediately.The waste water tank display Tank display S is designed as a panel version to match the VOTRONIC modular system and fits in perfectly with other VOTRONIC display units (uniform height 85 mm). Of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of just 18 mm allow installation in almost any location. The indicator is protected against reverse polarity and overload and is easy to connect via screw terminals on the back of the device.Key product features of the waste water tank indicator S, 5313 Suitable for 12V and 24V DC operating voltage Low current consumption: only 1 - 30 mA Test mark: E-test, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimensions: 29 x 63 x 18 mm Can be switched on and off at the touch of a button High display resolution of the tank level thanks to 10-stage display Suitable for the Votronic module system Can also be operated with 2 tank sensors The display units can also be assigned to 2 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for switching, e.g. switch panel 16 A S art. no. 1289 or switch panel 2x16 A S art. no. 1291Compatible with many Votronic tank sensors Tank electrode 12-24 K, 5543 Tank electrode 15-50 K, 5545 Tank electrode 20 K-WC, 5555 Tank sensor FL, 5530 Tank sensor 30-110 K-FL, 5551 Scope of delivery:1x Votronic 5313 waste water tank display S1x set of fixing screws1x drilling template1x operating instructions

The Votronic 5545 tank electrode 15-50 K is a universally applicable tank sensor for measuring the tank level. The tank electrode 15-50 K is suitable for fallow water and sewage tanks as well as for drinking water tanks. Thanks to the use of appropriate materials, these tank sensors also comply with the DIN 2001-2 drinking water regulations and are designed for tanks with a height of between 15 and 50 cm.Another special feature is that the tank electrodes can be mounted on the top of the tank from the inside as well as from the outside. For fresh water tanks, they can even be mounted on the underside of the tank.Key product features of the 15-50 K tank electrode Rod electrode, easy to shorten to tank height For tanks with a height between 15 and 50 cm Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 m Connection cable 75 cm long Simple adjustment to the specified tank height Test mark: E-test (EMC/vehicle directive) Complies with DIN standard 2001-2 from the Drinking Water Ordinance Linear, infinitely variable fill level signal Suitable for 12V and 24V continuous operation Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic gauges: Fresh water tank gauge S, 5311 Waste water indicator S, 5313 Holding tank indicator S, 5315 Info Panel Pro, 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery:1x Votronic 5545 15-50 K tank sensor1x mounting material consisting of sealing ring, union nut PG 29, connection cable 75 cm1x operating instructions

The Votronic tank electrode 20 K-WC (HAN 5555) is a tank sensor for cassette toilets in motorhomes, which are now considered the absolute standard. Cassette toilets are compact in design and have a display which, unfortunately, usually only marks the full state. Once this is reached, the toilet in the vehicle can no longer be used. The use of tank sensors in combination with Votronic fill level indicators allows you to plan the disposal and replacement of your mobile tanks in advance.The main product features of the 20 K-WC tank sensor Tank sensor specially designed for cassette toilets and mobile tanks Compact, robust, waterproof (IP67) Simple installation, no inspection opening required With 3-pin circular plug connection for disconnecting the tank Complete installation material included in the scope of delivery Rod electrode, easy to shorten to tank height Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 mm Test mark: E-test (EMC/vehicle directive) Connection cable 75 cm long Mounting from above using mounting ring Detachable plug connection for tank emptying Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic displays: . Waste water indicator S, 5313 Holding tank indicator S, 5315 Info Panel Pro, 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Solid measurement technology and simple installationThe tank electrode 20 K-WC has been further developed on the basis of the long-established tank electrode to provide a fully-fledged level indicator especially for use in cassette toilets. The compact design makes it possible to simply screw the tank sensor into the toilet cassette from above using the mounting ring supplied. The 38 mm diameter mounting hole required for this is easy to make using a hole saw. The fully encapsulated electronics are designed to be waterproof (IP67) and suitable for rough operation when flushing the toilet cassette.To change the cassette, the tank electrode 20 K-WC is disconnected from the vehicle via a solid 3-pin round plug and the plug is fixed to the cassette. In addition to the 3-pin round plug connection, the scope of delivery also includes a mounting ring and the complete mounting material.Scope of delivery:1x Votronic 5555 Tank electrode 20 K-WC

The level gauge / tank electrode FL from Votronic (MPN 5530) is based on a flexible cable probe and can be easily shortened to the appropriate tank height. The tank sensor is ideally suited for both fresh water tanks and waste water tanks. Thanks to the use of appropriate materials, these tank sensors also comply with the DIN 2001-2 drinking water regulations. The tank sensor is designed for high tanks with a height of between 30 and 110 cm.Another special feature of the Votronic FL tank electrode is that it can be mounted both on the inside and outside of the tank. The top and side walls of the tank can be used for mounting the Tank Sensor FL.Key product features of the Tank Sensor FL 5530 Permissible operating voltage: 12V and 24V DC (suitable for continuous operation) for mounting on the top or side wall of the tank suitable for fresh and waste water tanks suitable for tank heights from 30 to 100 cm Linear, stepless signal of the fill level Test mark: E-test (EMC/vehicle directive) Complies with DIN standard 2001-2 from the Drinking Water Ordinance Flexible cable probe, easy to shorten to tank height Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 mm Connection cable 75 cm long for plastic tanks: wall thickness max. 8 mm Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic gauges: . Fresh water tank gauge S, 5311 Waste water indicator S, 5313 Holding tank indicator S, 5315 Info Panel Pro 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery:1x Votronic 5530 FL tank sensor1x Flexible cable probe, sealing ring and PG 29 union nut1x Operating instructions

Victron Energy Cerbo GX- S Systemüberwachung   Auf Grund der angespannten Komponentensituation wird die Cerbo-S gebaut.   Diese kommt ohne CAN BMS Port, Temperatur- und Tanksensoren- Eingänge.   So kann auf einen schwer zu beschaffenden Chip  verzichtet werden.    Bitte bestellen Sie doch eine Cerbo-S GX wenn Sie diese Funktionen nicht benötigen.    (Meiste Automobil und Marine Anwendungen)Diese völlig neue Kommunikationszentrale ermöglicht Ihnen die perfekte Kontrolle über Ihr System, egal wo Sie sich befinden, und maximiert seine Leistung. Verbinden Sie sich einfach über unser Victron Remote Management (VRM) Portal oder greifen Sie direkt über das separate GX Touch auf ein MFD oder unsere VictronConnect App dank der zusätzlichen Bluetooth-Fähigkeit zu. Diese jüngste Ergänzung der GX-Reihe vereint das Beste an Konnektivität und definiert intelligente Stromversorgungslösungen in jeder Hinsicht neu.Perfekte Überwachung & SteuerungÜberwachen Sie sofort den Ladezustand der Batterie, den Stromverbrauch, die Energiegewinnung aus PV, Generator und Netz. Steuern Sie einfach die Strombegrenzung für die Landstromeinspeisung, den (automatischen) Start/Stopp-Generator(en) oder ändern Sie beliebige Einstellungen, um das System zu optimieren. Verfolgen Sie Warnmeldungen, führen Sie Diagnoseprüfungen durch und lösen Sie Probleme aus der Ferne. Der Cerbo GX verwandelt jede Herausforderung an die Leistung in ein müheloses Erlebnis.Maximieren Sie Ihre SystemleistungDer Cerbo GX maximiert die Leistung Ihrer Systemkomponenten in Echtzeit und hält sie in perfekter Abstimmung. Bis zu 25 gleichzeitig angeschlossene VE.Can Solarladegeräte können überwacht werden. Durch die neue NMEA 2000-out Unterstützung lässt sich der GX leicht in jedes Bootsnetzwerk integrieren. 3 VE.Direct-Ports, 3 USB-Ports, 4 digitale Eingänge und 2 Relais ermöglichen es Ihnen, die Steuerung auf eine neue Ebene zu erweitern. Die Maximierung der Systemleistung war noch nie so einfach.Erweitern Sie Ihre SichtMit dem neuen (optionalen) GX Touch Display haben Sie im Handumdrehen den Überblick über Ihr System und können Einstellungen vornehmen. Sein superschlankes, wasserdichtes 5- oder 7-Zoll-Design, das von oben montierbare Setup und seine einfache Installation bringen eine Menge Flexibilität bei der Erstellung eines klaren und sauberen Armaturenbretts.Einfache Montage und KonfigurationDer Cerbo GX ist jetzt so optimiert, dass er die Anforderungen der Installateure mehr als erfüllt. Das Gerät ist einfach auf einer DIN-Schiene (mit DIN35 adapter small, nicht enthalten) montierbar und sein separater Touchscreen kann jetzt auf ein Armaturenbrett geschraubt werden, so dass keine perfekten Ausschnitte (wie bei der Color Control GX) erstellt werden müssen, und wird über nur ein Kabel angeschlossen, so dass man nicht mehr viele Kabel zu einem Armaturenbrett bringen muss. Seine neue Bluetooth-Funktion ermöglicht eine schnelle Verbindung und Konfiguration über unsere VictronConnect App.Überlisten Sie jede energetische HerausforderungDer Cerbo GX dient unendlich vielen Zwecken und erweitert die perfekte Kontrolle auf die unterschiedlichsten Anwendungen. Für Lösungen mit Generatoren, wie z.B. Marine, oder Backup & Off-grid, startet/stoppt er Ihren Generator automatisch oder verzögert die Zündung bis zum Ende der 'ruhigen' Zeiten. Für Energiespeichersysteme hält es die Backup-Batterien auf 100%, schaltet sich bei Stromausfall ein und leitet überschüssigen (Solar-)Strom zum Eigenverbrauch um, wodurch Sie Geld sparen. Für RV und Notfallfahrzeuge hält es lebenswichtige Systeme einwandfrei funktionsfähig. Aber das ist nur, um ein paar zu nennen...Sehen Sie sich das neue Video an, das alles Wissenswerte über die Installation des neuen Cerbo GX & GX Touch 50 erklärt.Victron Remote ManagementDas Online-Portal Victron Remote Management (VRM) ermöglicht Ihnen den Zugriff auf Ihre Installation, von überall und zu jeder Zeit. In VRM können Sie den Status Ihrer angeschlossenen Produkte überprüfen, detaillierte Verlaufsgrafiken Ihrer Energie anzeigen, detaillierte Analyseberichte erstellen und sogar automatische Alarme konfigurieren, falls etwas schief geht.

The GX Touch 70 display from Victron Energy (MPN BPP900455070) is the display accessory for the Cerbo GX communication center. The 7-inch touchscreen display provides an immediate overview of your system and allows you to make settings in no time at all. The display is easily connected to the Cerbo GX via a cable. Its super-slim, waterproof design and easy installation offer great flexibility.Features of the GX Touch 70 7-inch touchscreen display Instant system overview Easy installation from above Connection via a cable The addition to the Cerbo GXThe GX Touch 70 display is the ideal addition to get the most out of your Cerbo GX communication center. Access it directly via GX Touch 70 using the Bluetooth capability, optimize your system and make changes quickly and easily.Scope of delivery:1x GX Touch 70 display1x HDMI-USB connection cable1x mounting material

The Cerbo GX MK2 communication center from Victron Energy (MPN BPP900450110) allows you to comprehensively monitor and control your entire system, be it inverters, solar charge controllers or chargers. It connects all GX-enabled Victron devices, giving you full control and maximum performance. With its remote access capability, you can monitor and configure your solar system at any time and from anywhere - even if it is installed on the other side of the world.The Victron Cerbo GX MK2 boasts numerous improvements and new functions:Two fully functional CAN bus connections (VE.Can 1 and VE.Can 2) - replacing the previous VE.Can and BMS Can connectionVE.Can is now isolated - an improvement over previous modelsRJ-45 jacks have been rotated 180 degrees to make it easier to pull out the cablesAll 3 USB ports are now fully functional - previously only two of them workedThe digital inputs now also support pulse countingEasy monitoring and controlWith the Cerbo GX MK2, you can monitor power consumption and energy generation from PV, generator and grid quickly and easily from anywhere. Tank levels and temperature measurements can also be checked. Easily control the current limit for shore power feed-in, the automatic start/stop of your generator or adjust any settings to optimize your system. Track alerts, run diagnostic checks and troubleshoot problems remotely.Features of the Cerbo GX MK2 communication centerEasy control of your systemFlexible connection optionsMaximize your system performanceUncomplicated installationAvailable connections3 VE.Direct ports3 USB ports4 digital inputs2 relays2 VE.Bus2 VE.CanFlexible connection optionsSystem control via the Cerbo GX communication center is possible regardless of time and place. The device offers three different connection options. Either via the free Victron Remote Management (VRM) portal, the Victron Energy GX Touch 50 or via the VictronConnect app via Bluetooth.Technical specificationsOperating voltage: 8-70 VDCPower consumption without GX Touch: 2.8W at 12VMounting: Wall or DIN rail (35mm)WLAN integratedCable length: 2 metersOperating temperature: -20 to +50°CProtection class: IP20Dimensions: 78 x 154 x 48mmWeight: 0.3655kg Scope of delivery1x Victron Cerbo GX MK2 communication center1x mains cable with inline fuse and M8 connection eyes for battery or DC busbar mounting2x VE.Can terminating resistors1x terminal blocks for all connections on each sideTranslated with DeepL.com (free version)

Victron Energy GX Tank 140 Tank gauge programmableThe GX Tank 140 records measured values from up to four tank level sensors. It is an accessory for our range of GX system monitoring products, of which Cerbo GX is the most commonly used model.The tank levels can be read out both locally in the system, see screenshot, and remotely via our VRM portal.The GX Tank 140 is compatible with both current transmitters (4 to 20 mA) and voltage transmitters (0 to 10 V). The GX device is connected via USB, which also supplies the GX Tank with power. No additional power cables are required.The wiring of the tank transmitter is kept as simple as possible: Two of the four inputs provide a 24 V power supply for the transmitter. The other two channels require an external power supply, for which a mains connection with fused outputs is provided.The upper and lower limit values are configurable to allow the use of transmitters that only supply part of the scale, e.g. 0 to 5 V.In order to obtain a stable measured value, the measured values are attenuated by averaging. The damping can be configured between 1 and 60 seconds.Defective sensors and wiring problems are detected. An alarm is triggered if the values are outside the permissible range.In maritime applications, the GX device can transmit these tank levels to other displays, such as an MFD, via the NMEA 2000 network.

The Color Control GX from Victron (MPN BPP000300100R), CCGX for short, is a modern system control panel and display for a large number of Victron devices simultaneously. It connects all the electronic components of a system and thus acts as a control center where you can configure and monitor charge controllers, inverters, AC distribution and much more.Key product highlights at a glance Countless Victron devices can be connected to the CCGX, including inverters, multis, quattros, MPPT charge controllers, BMV-700, BMV-600, Lynx Ion + shunts and many more. (Complete list of devices can be found further down in the text) High-resolution color display and intuitive operation free remote monitoring via connection to Victron's VRM-Online portal, a demo version of the portal can be viewed here https://vrm.victronenergy.com Automatic firmware updates ensure many new functions and up-to-date software long after purchase Unlike the Victron Global Remote 2 (VGR2) and the Victron Ethernet Remote (VER), the CCGX saves all data locally in the event of network interruptions. As soon as the connection to the VRM online portal is re-established, all restored data is automatically sent to the portal. Various languages: English, Chinese, German, Italian, Spanish, French, Swedish and Dutch. Compared to the Victron Global Remote 2 (VGR2) and the Victron Ethernet Remote (VER), the CCGX saves all data locally in the event of network interruptions. As soon as the connection to the VRM online portal is re-established, all restored data is automatically sent to the portal, where you can then conveniently view it graphically on a website anywhere in the world. VE.Direct devices can also be connected to the CCGX via USB - so you can connect more than two VE.Direct devices to the CCGX A USB GPS can be connected to the USB port. The location and speed are then shown on the display. The data is then sent to the VRM portal for tracking purposes. The most recent position is then displayed on the map on the VRM. VE.Direct devices can also be connected to the CCGX via USB - so you can connect more than two VE.Direct devices to the CCGX A USB GPS can be connected to the USB port. The location and speed are then shown on the display. The data is then sent to the VRM portal for tracking purposes. The latest position is then displayed on the map on the VRM WiFi USB Free remote monitoring via Victron VRM online portalApart from monitoring and operating devices on the CCGX, the information is also forwarded to our free remote monitoring website: To get an impression of the VRM online portal, please visit the following address: https://vrm.victronenergy.com and try out the demonstration function. Future features will be automatically installed on the CCGX via firmware updateThe CCGX offers endless possibilities. It will take years to implement all our ideas and wishes. For this reason, many functions are not yet available. Functions marked with "Future function" will be made available later as firmware updates. Firmware updates are free of charge for all Victron products. Updating the product is simple: the CCGX updates itself automatically as long as it is connected to the Internet. Manual updates can be carried out using a USB stick or microSD card. Multis and quattros, including split-phase and three-phase systems, monitoring and control (on/off and current limiter). Changing the settings is not yet available. BlueSolar MPPT 150/70 and the MPPT 150/85. The current solar output is displayed on the overview screen and all parameters are logged on the VRM online portal. Please note that the VRM app has a nice overview in which the data of the BlueSolar MPPT 150/70 is also displayed. If several BlueSolar MPPTs with VE.Can are used in parallel connection, the Color Control shows all information in one. BlueSolar MPPT solar chargers with a VE.Direct port (70/15, 75/15, 100/15, 100/30, 75/50, 100/50, 150/35) can be connected to the VE.Direct ports on the CCGX. Several can also be connected at the same time. They then appear as a separate solar charger in the device list. Devices from the BMV-700 family can be connected directly to the VE.Direct ports on the CCGX. Use the VE.Direct cable for this Devices from the BMV-600 family can be connected to the VE.Direct ports on the CCGX. To do this, use the VE.Direct to BMV60xS cable Lynx Ion + Shunt Lynx Shunt VE.Can - Skylla-i NMEA2000 tank sensors Scope of delivery: 1x Victron BPP000300100R Color Contral GX1x operating instructions

The Cerbo GX communication center from Victron Energy (MPN BPP900450100) gives you perfect control over your system and maximizes its performance. The latest device in the Victron GX range scores highly in terms of connectivity and intelligent power supply. Maximizing system performance has never been easier.Easy monitoring and controlWith the Cerbo GX, you can quickly monitor battery charge status, power consumption, energy production from PV, generator and grid. Tank levels and temperature measurements can also be checked. Simply control the current limit for shore power feed-in, the (automatic) start/stop generator or change any settings to optimize the system. Track alerts, perform diagnostic checks and solve problems remotely. Features of the Cerbo GX communication center Easy control of your system Flexible connection options Maximize your system performance Uncomplicated installation Available connections 4 tank connections 4 temperature ports 3 VE.Direct ports 3 USB ports 4 digital inputs 2 relays Flexible connection options System control via the Cerbo GX communication center is possible regardless of time and place. The device offers three different connection options. Either via the free Victron Remote Management (VRM) portal, the Victron Energy GX Touch 50 (5-inch touchscreen display) or via the VictronConnect app via Bluetooth.Scope of delivery:1x Cerbo GX device1x mains cable with inline fuse and M8 connection sockets for battery or DC busbar mounting2x VE.Can terminating resistors1x terminal blocks for all connections on each side

The Victron Digital Multi Control Panel (MPN DMC000200010R) is a remote control panel for MultiPlus and Quattro inverters and grounds on the VE.Bus-technology.It allows the configuration of PowerControl and PowerAssist power-limitation for two AC-sources, for example generator or shore-power. Setting range: up to 200A.Moreover it can be used as on-/off-switch for connected devices. The LEDs' luminosity is reduced automatically during night-time. The DMC is a remote control panel for als Multis or Quattros and for all systems where a Multi or Quattro is integrated. This includes single devices, parallel operation and multiphase-operation.It supports either VE.Bus-systems but also systems without it. The DMC allows the separate adjustment of generator- and shore-power. When installed in an extended VE.Bus-system up to four different shore-power sources can be adjusted.Within a VE.Bus-system the DMC will choose the right setting range for your system automatically.Delivery scope:1x Victron DMC000200010R Digital Multi Control Panel for Multiplus and Quattro inverters1x Manual

Das GX Touch 50 Display von Victron Energy (MPN BPP900455050) ist das Anzeige-Zubehör für die Cerbo GX Kommunikationszentrale. Das 5-Zoll-Touchscreen-Display bietet einen sofortigen Überblick über Ihr System und erlaubt es, Einstellungen im Handumdrehen vorzunhemen. Das Display wird unkompliziert über ein Kabel an Cerbo GX angeschlossen. Sein superschlankes, wasserdichtes Design und die einfache Installation bieten viel Flexibilität. Eigenschaften des GX Touch 50 5-Zoll-Touchscreen-Display Sofortiger Systemüberblick Einfache Anbringung von oben Anschluss über ein Kabel   Die Ergänzung zum Cerbo GX Das GX Touch 50 Display ist die ideale Ergänzung um Ihr Cerbo GX Kommunikationszentrum optimal zu nutzen. Greifen Sie mithilfe der Bluetooth-Fähigkeit direkt über GX Touch 50 darauf zu und optimieren Sie Ihr System und nehmen Änderungen einfach und schnell vor.Lieferumfang:1x GX Touch 50 Display1x HDMI-USB-Verbindungskabel1x Montagematerial

The Cerbo GX communication center from Victron Energy (MPN BPP900450100) gives you perfect control over your system and maximizes its performance. The latest device in the Victron GX range scores highly in terms of connectivity and intelligent power supply. Maximizing system performance has never been easier.Easy monitoring and controlWith the Cerbo GX, you can quickly monitor battery charge status, power consumption, energy production from PV, generator and grid. Tank levels and temperature measurements can also be checked. Simply control the current limit for shore power feed-in, the (automatic) start/stop generator or change any settings to optimize the system. Track alerts, perform diagnostic checks and solve problems remotely. Features of the Cerbo GX communication center Easy control of your system Flexible connection options Maximize your system performance Uncomplicated installation Available connections 4 tank connections 4 temperature ports 3 VE.Direct ports 3 USB ports 4 digital inputs 2 relays Flexible connection options System control via the Cerbo GX communication center is possible regardless of time and place. The device offers three different connection options. Either via the free Victron Remote Management (VRM) portal, the Victron Energy GX Touch 50 (5-inch touchscreen display) or via the VictronConnect app via Bluetooth.Scope of delivery:1x Cerbo GX device1x mains cable with inline fuse and M8 connection sockets for battery or DC busbar mounting2x VE.Can terminating resistors1x terminal blocks for all connections on each side