The Color Control GX from Victron (MPN BPP000300100R), CCGX for short, is a modern system control panel and display for a large number of Victron devices simultaneously. It connects all the electronic components of a system and thus acts as a control center where you can configure and monitor charge controllers, inverters, AC distribution and much more.Key product highlights at a glance Countless Victron devices can be connected to the CCGX, including inverters, multis, quattros, MPPT charge controllers, BMV-700, BMV-600, Lynx Ion + shunts and many more. (Complete list of devices can be found further down in the text) High-resolution color display and intuitive operation free remote monitoring via connection to Victron's VRM-Online portal, a demo version of the portal can be viewed here https://vrm.victronenergy.com Automatic firmware updates ensure many new functions and up-to-date software long after purchase Unlike the Victron Global Remote 2 (VGR2) and the Victron Ethernet Remote (VER), the CCGX saves all data locally in the event of network interruptions. As soon as the connection to the VRM online portal is re-established, all restored data is automatically sent to the portal. Various languages: English, Chinese, German, Italian, Spanish, French, Swedish and Dutch. Compared to the Victron Global Remote 2 (VGR2) and the Victron Ethernet Remote (VER), the CCGX saves all data locally in the event of network interruptions. As soon as the connection to the VRM online portal is re-established, all restored data is automatically sent to the portal, where you can then conveniently view it graphically on a website anywhere in the world. VE.Direct devices can also be connected to the CCGX via USB - so you can connect more than two VE.Direct devices to the CCGX A USB GPS can be connected to the USB port. The location and speed are then shown on the display. The data is then sent to the VRM portal for tracking purposes. The most recent position is then displayed on the map on the VRM. VE.Direct devices can also be connected to the CCGX via USB - so you can connect more than two VE.Direct devices to the CCGX A USB GPS can be connected to the USB port. The location and speed are then shown on the display. The data is then sent to the VRM portal for tracking purposes. The latest position is then displayed on the map on the VRM WiFi USB Free remote monitoring via Victron VRM online portalApart from monitoring and operating devices on the CCGX, the information is also forwarded to our free remote monitoring website: To get an impression of the VRM online portal, please visit the following address: https://vrm.victronenergy.com and try out the demonstration function. Future features will be automatically installed on the CCGX via firmware updateThe CCGX offers endless possibilities. It will take years to implement all our ideas and wishes. For this reason, many functions are not yet available. Functions marked with "Future function" will be made available later as firmware updates. Firmware updates are free of charge for all Victron products. Updating the product is simple: the CCGX updates itself automatically as long as it is connected to the Internet. Manual updates can be carried out using a USB stick or microSD card. Multis and quattros, including split-phase and three-phase systems, monitoring and control (on/off and current limiter). Changing the settings is not yet available. BlueSolar MPPT 150/70 and the MPPT 150/85. The current solar output is displayed on the overview screen and all parameters are logged on the VRM online portal. Please note that the VRM app has a nice overview in which the data of the BlueSolar MPPT 150/70 is also displayed. If several BlueSolar MPPTs with VE.Can are used in parallel connection, the Color Control shows all information in one. BlueSolar MPPT solar chargers with a VE.Direct port (70/15, 75/15, 100/15, 100/30, 75/50, 100/50, 150/35) can be connected to the VE.Direct ports on the CCGX. Several can also be connected at the same time. They then appear as a separate solar charger in the device list. Devices from the BMV-700 family can be connected directly to the VE.Direct ports on the CCGX. Use the VE.Direct cable for this Devices from the BMV-600 family can be connected to the VE.Direct ports on the CCGX. To do this, use the VE.Direct to BMV60xS cable Lynx Ion + Shunt Lynx Shunt VE.Can - Skylla-i NMEA2000 tank sensors Scope of delivery: 1x Victron BPP000300100R Color Contral GX1x operating instructions

In this plastic housing (MPN ASS050600000) you can install your Color Control GX and an additional MPPT Control or BMV battery monitor in an elegant and safe way. In addition to the significantly improved protection of the electronics against moisture, the housing also offers other advantages in terms of installation safety. The cables are routed through an opening and can still be strain-relieved in the housing.Compatible with: Victron Color Control GX + BMV 70x or MPPT Control Scope of delivery1x Victron ASS050600000 Housing Color Control GX + BMV 70x and MPPT Control

This panel is suitable for both multis and quattros. It enables the setting of PowerControl and PowerAssist current limits for two AC sources: for example, for generator and shore power. Setting range: up to 200 A. The brightness of the LEDs is automatically reduced during the night and this panel is suitable for both multis and quattros. It enables the setting of PowerControl and PowerAssist current limits for two AC sources: for example, for generator and shore power. Setting range: up to 200 A. The brightness of the LEDs is automatically reduced during the night.

The Victron Digital Multi Control Panel (MPN DMC000200010R) is a remote control panel for MultiPlus and Quattro inverters and grounds on the VE.Bus-technology.It allows the configuration of PowerControl and PowerAssist power-limitation for two AC-sources, for example generator or shore-power. Setting range: up to 200A.Moreover it can be used as on-/off-switch for connected devices. The LEDs' luminosity is reduced automatically during night-time. The DMC is a remote control panel for als Multis or Quattros and for all systems where a Multi or Quattro is integrated. This includes single devices, parallel operation and multiphase-operation.It supports either VE.Bus-systems but also systems without it. The DMC allows the separate adjustment of generator- and shore-power. When installed in an extended VE.Bus-system up to four different shore-power sources can be adjusted.Within a VE.Bus-system the DMC will choose the right setting range for your system automatically.Delivery scope:1x Victron DMC000200010R Digital Multi Control Panel for Multiplus and Quattro inverters1x Manual