Victron BlueSolar 75/10 MPPT Solar-Laderegler 12V/24V Batterie Der Victron BlueSolar 75/10 MPPT Solar-Laderegler 12V/24V Batterie ist geeignet für Solarmodule bis 145 W (an 12V) bzw. 290 W (an 24V) Gesamtleistung. Das ultraschnelle "Maximum Power Point Tracking" (MPPT) verbessert insbesondere bei bedecktem Himmel den Ertrag aus den Solarzellen deutlich. Der eingebaute "BatteryLife"-Algorithmus sorgt für eine optimale Batterieladung, auch wenn die Batterie nicht in einem Ladevorgang komplett geladen werden kann (weil z.B. die Solarzelle wegen Abschattung oder Dunkelheit keine Ladeleistung mehr liefert). Technische Daten: Spannung: Für 12 Volt und 24 Volt Bordnetze zu verwendenNennladestrom: 10 AmpereMax. PV-Leerlaufspannung: 75 VoltUltraschnelles Maximum Power Point Tracking (MPPT)BatteryLife: intelligentes Batteriemanagement durch LastabwurfAutomatische BatteriespannungserkennungFlexible LadealgorithmenÜberhitzungsschutz und Lastminderung bei hohen Temperaturen

The Victron MPPT 100/50 (MPN SCC020050200) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends your solar system's output. Besides a higher charging and PV-capacity this Blue varys even more from lower models. More security compared to smaller BlueSolar modelsCompared to 75/10, 75/15 and 100/15 the BlueSolar 100/50 MPPT comes with a overheat protection with auto-switch-off and auto-restart function after reaching a normal operation temperature. Moreover it is equipped with a PV-current reflow protection (the first model in this series). Next generation MPP-trackerEspecially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to PWM charge controllers. Additionally the 100/50 is equipped with even more innovative technology like the VE.Direct data port.  Programming, real-time data and loggingLatest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Important features:Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudyIntegrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panelSuitable for 12V and 24V systemsRated charging amperage: 50A700W max. PV-performance at 12V and 1400W at 24V50A consumer output with auto-shutdown at imminent battery undervoltage (deep discharge protection)Reverse polarity protectionMultistep adaptive charging algorithmBattery charging algorithm programmableIntegrated battery life algorithm extends battery life when activated and all consumers are connected to the consumer outputDay/night-time control and dimming options VE.Direct data port integratedVE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct. Integrated battery life algorithm extends battery lifeIf the charge controller can't manage to fully charge the battery within a day the battery status switches constantly between "partly charged" and "end of discharge". This operation mode (no regular charging) is ideal for small lead batteries, for lead-acid batteries otherwise irregular charging and discharging can cause severe damage already after several months.The battery life algorithm checks the battery's charging level and heightens the switch-off threshold from day to day. That means that connected consumers are switched off earlier until the produced energy is sufficient for a full battery charge of 100%. From this point on the threshold is modulated in a way that a full charge can be reached once a week.Delivery Scope:1x Victron SCC020050200 BlueSolar MPPT 100/50 12V 24V 50A charge controller1x Manual

The Victron MPPT 75/15 (MPN SCC010015050R) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends your solar system's output. Next generation MPP-trackerEspecially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to PWM charge controllers. Moreover the 75/15 comes with further innovative technologies. Programming, real-time data and loggingLatest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Important features: Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudyIntegrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panelSuitable for 12V and 24V systemsRated charging amperage: 15A200W max. PV-performance at 12V and 400W at 24V15A consumer output with auto-shutdown at imminent battery undervoltage (deep discharge protection)Reverse polarity protectionMultistep adaptive charging algorithmBattery charging algorithm programmableIntegrated battery life algorithm extends battery life when activated and all consumers are connected to the consumer outputDay/night-time control and dimming options VE.Direct data port integratedVE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct. Integrated battery life algorithm extends battery lifeIf the charge controller can't manage to fully charge the battery within a day the battery status switches constantly between "partly charged" and "end of discharge". This operation mode (no regular charging) is ideal for small lead batteries, for lead-acid batteries otherwise irregular charging and discharging can cause severe damage already after several months.The battery life algorithm checks the battery's charging level and heightens the switch-off threshold from day to day. That means that connected consumers are switched off earlier until the produced energy is sufficient for a full battery charge of 100%. From this point on the threshold is modulated in a way that a full charge can be reached once a week. Delivery Scope:1x Victron SCC010015050R BlueSolar MPPT 75/15 12V 24V 15A charge controller1x Manual

The Victron MPPT 75/15 (MPN SCC010015050R) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends your solar system's output. Next generation MPP-trackerEspecially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to PWM charge controllers. Moreover the 75/15 comes with further innovative technologies. Programming, real-time data and loggingLatest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Important features: Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudyIntegrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panelSuitable for 12V and 24V systemsRated charging amperage: 15A200W max. PV-performance at 12V and 400W at 24V15A consumer output with auto-shutdown at imminent battery undervoltage (deep discharge protection)Reverse polarity protectionMultistep adaptive charging algorithmBattery charging algorithm programmableIntegrated battery life algorithm extends battery life when activated and all consumers are connected to the consumer outputDay/night-time control and dimming options VE.Direct data port integratedVE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct. Integrated battery life algorithm extends battery lifeIf the charge controller can't manage to fully charge the battery within a day the battery status switches constantly between "partly charged" and "end of discharge". This operation mode (no regular charging) is ideal for small lead batteries, for lead-acid batteries otherwise irregular charging and discharging can cause severe damage already after several months.The battery life algorithm checks the battery's charging level and heightens the switch-off threshold from day to day. That means that connected consumers are switched off earlier until the produced energy is sufficient for a full battery charge of 100%. From this point on the threshold is modulated in a way that a full charge can be reached once a week. Delivery Scope:1x Victron SCC010015050R BlueSolar MPPT 75/15 12V 24V 15A charge controller1x Manual

The Victron MPPT 150/35 (MPN SCC020035000) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends your solar system's output. Besides a higher charging and PV-capacity this Blue varys even more from lower models. This is the first model within the BlueSolar series that also supports 48V batteries. Next generation MPP-trackerEspecially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to PWM charge controllers. Additionally the 100/50 is equipped with even more innovative technology like the VE.Direct data port. Extensive electronical protection from:reverse battery polaritycurrent reflow into the moduleoverheatingshort-circuitsreverse PV-connection polarity Programming, real-time data and loggingLatest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Important features:Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudyIf the panel is partly shaded auto-MPP-voltage tracking ensures more outcome compared to common MPPT charge controllersIntegrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panelHigh effectivity of 98%Fully programmable charging algorithms that can be changed via a switch on the deviceRated charging amperage: 35A, 150V max. PV no-load voltage12V:500W/24V:1000W/36V:1500W/48V:2000WMultistep adaptive charging algorithmIntegrated temperature sensor adjusts Charging processes according to battery temperatureDay/night-time control and dimming options VE.Direct data port integratedVE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct. Integrated battery life algorithm extends battery lifeIf the charge controller can't manage to fully charge the battery within a day the battery status switches constantly between "partly charged" and "end of discharge". This operation mode (no regular charging) is ideal for small lead batteries, for lead-acid batteries otherwise irregular charging and discharging can cause severe damage already after several months.The battery life algorithm checks the battery's charging level and heightens the switch-off threshold from day to day. That means that connected consumers are switched off earlier until the produced energy is sufficient for a full battery charge of 100%. From this point on the threshold is modulated in a way that a full charge can be reached once a week.Delivery Scope:1x Victron SCC020035000 BlueSolar MPPT 150/35 12V 24V 36V 48V 35A charge controller1x Manual

The Victron MPPT 150/35 (MPN SCC020035000) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends your solar system's output. Besides a higher charging and PV-capacity this Blue varys even more from lower models. This is the first model within the BlueSolar series that also supports 48V batteries. Next generation MPP-trackerEspecially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to PWM charge controllers. Additionally the 100/50 is equipped with even more innovative technology like the VE.Direct data port. Extensive electronical protection from:reverse battery polaritycurrent reflow into the moduleoverheatingshort-circuitsreverse PV-connection polarity Programming, real-time data and loggingLatest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Important features:Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudyIf the panel is partly shaded auto-MPP-voltage tracking ensures more outcome compared to common MPPT charge controllersIntegrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panelHigh effectivity of 98%Fully programmable charging algorithms that can be changed via a switch on the deviceRated charging amperage: 35A, 150V max. PV no-load voltage12V:500W/24V:1000W/36V:1500W/48V:2000WMultistep adaptive charging algorithmIntegrated temperature sensor adjusts Charging processes according to battery temperatureDay/night-time control and dimming options VE.Direct data port integratedVE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct. Integrated battery life algorithm extends battery lifeIf the charge controller can't manage to fully charge the battery within a day the battery status switches constantly between "partly charged" and "end of discharge". This operation mode (no regular charging) is ideal for small lead batteries, for lead-acid batteries otherwise irregular charging and discharging can cause severe damage already after several months.The battery life algorithm checks the battery's charging level and heightens the switch-off threshold from day to day. That means that connected consumers are switched off earlier until the produced energy is sufficient for a full battery charge of 100%. From this point on the threshold is modulated in a way that a full charge can be reached once a week.Delivery Scope:1x Victron SCC020035000 BlueSolar MPPT 150/35 12V 24V 36V 48V 35A charge controller1x Manual

The MPPT 150/45tr (MPN SCC010045200) is part of the BlueSolar MPPT charge controller familiy. Ultra-fast powertracking and automatic MPP-voltage adjustment extend your solar system's output. Models from 150/45tr to 150/100tr are also available with MC4-connections instead of screw clamps (solar input). Additionally this model supports concurrent operation with other controllers of the same type. Programming, real-time data and loggingLatest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Next generation MPP-trackerIn case of partial module shading there can be more than one point of maximum performance on the voltage curve. Common MPPTs tend to switch to a local MPP even if it not the ideal one. The innovative algorithm used in BlueSolar devices maximizes the energery outcome by always adjusting to the optimal MPP.  Important features:Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudyAuto-detection of partly shading and adjustment to the ideal MPP - more outcome compared to "simple" MPPT charge controllersIntegrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panelHigh effectivity of 98%Concurrent operation with other 150/45 controllers possibleConstant charging voltage adjustableTrickle charge voltage adjustableSupported battery types: AGM, gel, lead-acid, calcium-calcium and lithium batteriestr-Version: solar modules connectable via screw clamps (max. 35mm²Fully programmable charging algorithms that can be changed via a switch on the deviceRated charging amperage: 45A, 150V max. PV no-load voltage12V: 650W / 24V: 1300W / 48V: 2600WIntegrated protection from reverse battery polarityMultistep adaptive charging algorithmIntegrated temperature sensor adjusts Charging processes according to battery temperatureDay/night-time control and dimming options Extensive protection functions from:reverse battery polarityPV current reflowoverheatingshort-cicuitsreverse PV-connection polarity VE.Direct data port integratedVE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct.Delivery Scope:1x Victron SCC010045200 BlueSolar MPPT 150/45tr 12V 24V 36V 48V 45A charge controller1x Manual

The Victron MPPT 150/60tr (MPN SCC010060200) is part of the BlueSolar MPPT charge controller familiy and provides a wide spectrum of functions for demanding users.Ultra-fast powertracking and MPP-auto-adjustment are only two of the many highlights. The models 150/45tr to 150/100tr are also available with MC4 connectors instead of screw clamps to connect the solar panel.Additionally this device supports the parallel operation with other charge controllers of the same type. VE-Direcht options for programming, real-time data and loggingLatest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Advanced MPP-tracking in case of partial shadingIn case of partial shading there can be two or more points of maximum power (MPP) on the voltage curve. Common MPPTs tend to adjust to a local MPP which might not be the ideal one.The BlueSolar's innovative algorithm will always maximize your output by ajdusting to the best possible MPP. Important features:Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudyMPP-auto-adjustment to increase the output compared to common MPPTs.Integrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panelHigh max. efficiency of 98%Parallel operation with other 150/60 charge contollersAdjustable constant charge voltageAdjustable trickle charge voltageSuitable for all AGM, gel, lead-acid, calcium-calcium and lithium-batteriestr-version: connection to panel with screw clamps (max. 35mm²)Battery charging algorithm fully programmable, programm can be switch via in-built buttonsNominal current of 60A, 150v max. PV no-load voltageMax. PV-performance: 12V = 850W 24V = 1720W 48V = 3440WReverse polarity protectionAdaptive multi-step chargin algorithmProtection class: electronical components IP 43, connectors IP 22Integrated temperature sensor adjusts trickle charge and constant charge voltage according temperatureDay/Night-timer and light-dimming option Next generation high-speed MPP-trackerEspecially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to slower MPPT charge controllers.Extensive protection functions:reverse battery polarityPV current reflowoverheatingshort-cicuitsreverse PV-connection polarity VE.Direct data port integratedVE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control.The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct.Delivery scope:1x Victron SCC010060200 BlueSolar MPPT 150/60tr 12V 24V 36V 48V 60A charge controller1x Manual

The Victron MPPT 150/60MC4 (MPN SCC010060300) is part of the BlueSolar MPPT charge controller familiy. Ultra-fast powertracking and automatic MPP-voltage adjustment extend your solar system's output. Models from 150/45MC4 to 150/100MC4 are also available with screw clamps (35mm²) instead of MC4-connectors (solar input). Additionally this model supports concurrent operation with other controllers of the same type. Programming, real-time data and loggingLatest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Next generation MPP-trackerIn case of partial module shading there can be more than one point of maximum performance on the voltage curve. Common MPPTs tend to switch to a local MPP even if it not the ideal one. The innovative algorithm used in BlueSolar devices maximizes the energery outcome by always adjusting to the optimal MPP.  Important features:Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudyAuto-detection of partly shading and adjustment to the ideal MPP - more outcome compared to "simple" MPPT charge controllersIntegrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panelHigh effectivity of 98%Concurrent operation with other 150/60 controllers possibleConstant charging voltage adjustableTrickle charge voltage adjustableSupported battery types: AGM, gel, lead-acid, calcium-calcium and lithium batteriesSolar connection via 2 MC4-connector pairs - two solar string possible, easy installationFully programmable charging algorithms that can be changed via a switch on the deviceRated charging amperage: 60A, 150V max. PV no-load voltage12V: 860W / 24V: 1720W / 48V: 3440WIntegrated protection from reverse battery polarityAdaptive multistep charging algorithmIntegrated temperature sensor adjusts Charging processes according to battery temperatureDay/night-time control and dimming options Extensive protection functions from:reverse battery polarityPV current reflowoverheatingshort-cicuitsreverse PV-connection polarity VE.Direct data port integratedVE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct.Delivery Scope:1x Victron SCC010060300 BlueSolar MPPT 150/60MC4 12V 24V 36V 48V 60A charge controller1x Manual

The Victron MPPT 100/15 (MPN SCC010015200R) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends your solar system's output. Compared to the 75/15 this controller processes a higher PV-Voltage and therefore handles a 100V DC safely. Next generation MPP-trackerEspecially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to PWM charge controllers. Moreover the 100/15 comes with further innovative technologies. Programming, real-time data and loggingLatest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Important features: Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudyIntegrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panelSuitable for 12V and 24V systemsRated charging amperage: 15A200W max. PV-performance at 12V and 400W at 24V15A consumer output with auto-shutdown at imminent battery undervoltage (deep discharge protection)Reverse polarity protectionMultistep adaptive charging algorithmBattery charging algorithm programmableIntegrated battery life algorithm extends battery life when activated and all consumers are connected to the consumer outputDay/night-time control and dimming options VE.Direct data port integratedVE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct. Integrated battery life algorithm extends battery lifeIf the charge controller can't manage to fully charge the battery within a day the battery status switches constantly between "partly charged" and "end of discharge". This operation mode (no regular charging) is ideal for small lead batteries, for lead-acid batteries otherwise irregular charging and discharging can cause severe damage already after several months.The battery life algorithm checks the battery's charging level and heightens the switch-off threshold from day to day. That means that connected consumers are switched off earlier until the produced energy is sufficient for a full battery charge of 100%. From this point on the threshold is modulated in a way that a full charge can be reached once a week. Delivery Scope:1x Victron SCC010015200R BlueSolar MPPT 100/15 12V 24V 15A charge controller1x Manual

The Victron MPPT 100/15 (MPN SCC010015200R) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends your solar system's output. Compared to the 75/15 this controller processes a higher PV-Voltage and therefore handles a 100V DC safely. Next generation MPP-trackerEspecially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to PWM charge controllers. Moreover the 100/15 comes with further innovative technologies. Programming, real-time data and loggingLatest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control.Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Important features: Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudyIntegrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panelSuitable for 12V and 24V systemsRated charging amperage: 15A200W max. PV-performance at 12V and 400W at 24V15A consumer output with auto-shutdown at imminent battery undervoltage (deep discharge protection)Reverse polarity protectionMultistep adaptive charging algorithmBattery charging algorithm programmableIntegrated battery life algorithm extends battery life when activated and all consumers are connected to the consumer outputDay/night-time control and dimming options VE.Direct data port integratedVE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct. Integrated battery life algorithm extends battery lifeIf the charge controller can't manage to fully charge the battery within a day the battery status switches constantly between "partly charged" and "end of discharge". This operation mode (no regular charging) is ideal for small lead batteries, for lead-acid batteries otherwise irregular charging and discharging can cause severe damage already after several months.The battery life algorithm checks the battery's charging level and heightens the switch-off threshold from day to day. That means that connected consumers are switched off earlier until the produced energy is sufficient for a full battery charge of 100%. From this point on the threshold is modulated in a way that a full charge can be reached once a week. Delivery Scope:1x Victron SCC010015200R BlueSolar MPPT 100/15 12V 24V 15A charge controller1x Manual

The Victron BlueSolar PWM-PRO 20A (MPN SCC010020110) is a solid entry-level device for solar technology and already has a number of professional functions integrated. It can also handle both the 12V and 24V battery voltage range, making it very flexible to use.Compared to the PWM_Light series, the BlueSolar series from Victron offers the user much more convenience and configuration options. In addition, an optional remote display is available for monitoring and configuring the controller.Free programming of all important control parameters via remote panelAlmost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. A feature that is otherwise only found on models in the higher classes. Among other things, the battery type-specific charging and discharging voltages as well as the switch-on and switch-off thresholds of the load output can be programmed. The remote panel is an optional accessory and is not included with the controller. For the exact programming options, please refer to the instructions in section 5.4 on page 12 of the EN manual. You can find the remote panel under item number 8-67-008490 .The optional USB-Link cable from Victron offers a cheaper version of the remote control of the controller with the same, if not even greater ease of use. In addition to the cable, you will receive the corresponding Victron PC software from us free of charge, with which you can fully program your controller and also receive comprehensive performance statistics from the software monitoring. The Victron USB-Link cable for the PWM Pro can be found here under item no. 1-67-008500 .Key product features 20A max. charging current, 20A max. solar power Optional remote display available Almost all relevant settings such as charging voltage etc. can be (freely) programmed by the user via the optional remote panel. suitable for AGM, GEL and batteries with liquid lead acid Suitable for 12V and 24V battery voltage Fully programmable lighting control complete battery charging thanks to three-stage charging process Load output with integrated switch-off function to protect your battery from deep discharge Overload and short-circuit protection are also already integrated at the load output Optional temperature sensor available Reverse polarity protection for solar and battery input

Product information “Victron Energy BlueSolar 150/100-Tr MPPT solar charge controller 100A 12/24/36/48V (VAT exempt)”The Victron MPPT 150/100-Tr (MPN SCC115110420) belongs to the large family of BlueSolar MPPT charge controllers and offers a wide performance spectrum for the demanding user. Ultra-fast power tracking and automatic adjustment of the MPP voltage in partial shading are just two of the many highlights of this device class. The devices in classes 150/45 to 150/100tr are also available in a version with MC4 connections on the solar side of the charge controller instead of screw terminals. This model can also be operated in parallel with other controllers of the same type.VE-Direct options for programming, real-time data and history displayModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected to the Bluetooth Smart Dongles and the MPPT app or the GX Color Control via VE.Direct, for example. Please note that Bluetooth Smart Dongles and GX Color Control are separate items that are not included in the scope of delivery of the charge controller, but can be purchased from us as an option.Advanced maximum power point detection for partial shadingIn the event of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to adjust to a local MPP. However, this may not be the optimal MPP. The innovative algorithm of the BlueSolar device will always maximize the energy yield by adjusting to the optimal MPP.Key product features of the BlueSolar 150/100 100A 12V 24V 36V 48V MPPTultra-fast MPP tracker of the latest generation ensures the best possible yield even in overcast conditionsautomatic detection of the MPP voltage in partial shading ensures a further improvement in yield compared to “simple” MPPT charge controllersintegrated VE.Direct data communication port for connection for communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control PanelHigh maximum efficiency of 98 %Parallel operation with other 150/100 controllers possibleAdjustable constant charging voltageAdjustable trickle charge voltageSuitable for all AGM, GEL, lead-acid, calcium-calcium and lithium batteriestr version = connection of the solar modules via screw terminals (max. 35mm²)Fully programmable charging algorithms, which are later activated and switched manually via a switch on the housingnominal charging current 100A, 150V maximum PV open-circuit voltagemaximum PV power output: 12V 1450W / 24V 2900W / 48V 5800WIntegrated protection against battery polarity reversalMulti-stage and adaptive charging algorithmIP 43 degree of protection for the electronic components and IP 22 degree of protection for the connection area of the controllerIntegrated temperature sensor balances maintenance and constant charging voltage according to temperatureDay/night time control and light dimming optionHigh-speed MPP tracker of the latest generationAn extremely fast MPPT controller improves the energy yield by up to 30 % compared to PWM charging controllers and by up to 10 % compared to slower MPPT controllers, especially under cloudy skies when the light intensity is constantly changing. Comprehensive electronic protection- Protection against reverse polarity battery connection- PV reverse current block- Protection against overheating of the device- Protection against short circuits- Protection against reverse polarity PV connectionVE.Direct data communication portVE.Direct in text mode transmits all important parameters every second to other devices that are coupled with the charge controller and thus offers the possibility of communication with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron brand world.Scope of delivery1x Victron SCC010045222 BlueSolar MPPT 150/10 12V 24V 36V 48V 100A charge controllerOperating instructions

The PWM-Light 48V 10A from Victron Energy (MPN SCC040010020) is an inexpensive PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off on the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or batteryIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC040010020 PWM-Light 48V - 10A1x instruction manual

Victron BlueSolar 5A PWM solar charge controller 12V/24V battery Technical data: Inexpensive PWM solar charge controller Internal temperature sensor Charging the battery in three stages (constant current, constant voltage, charge retention) Protection against overcurrent Short circuit protection Reverse polarity protection for solar modules and/or battery With output for load switch-off at low voltage

Victron BlueSolar 30A PWM solar charge controller 12V/24V battery Technical data: Inexpensive PWM solar charge controller Internal temperature sensor Charging the battery in three stages (constant current, constant voltage, charge retention) Protection against overcurrent Short circuit protection Reverse polarity protection for solar modules and/or battery With output for load switch-off at low voltage

The PWM-Light 12V 24V 20A from Victron Energy (MPN SCC010020020) is an inexpensive PWM charge controller and has been specially developed for controlling light. This gives you a whole range of configuration options for switching the DC load on or off on the controller. In addition to light, other things such as ventilation or similar could also be controlled with this controller in a convenient way. The exact configuration options can be found in the operating instructions.Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or battery12/24V automatic detectionIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC010020020 PWM-Light 12/24V-20A1x instruction manual

BlueSolar PWM DUO-LCD&USB 12/24V 20AVictron BlueSolar DUO- PWM solar charge controller for charging two separate batteries. For example: starter battery and service battery of a boat or caravan - Programmable charging current ratio - Charging voltage setting for three battery types (gel, AGM, lead-acid battery).Internal temperature sensor and optional remote temperature sensor Protection against overcurrent Short-circuit protection Reverse polarity protection for solar modules and/or battery. Important product featuresLoad output with function for disconnecting at low battery voltageParticularly suitable for use with inexpensive lead-acid batteriesLight-controlled, only one timerTwo-digit seven-segment display for quick and easy setting of the load output function, including timer settingBattery charging in three stages (constant current, constant voltage, charge retention), not programmableLoad output protected against overload and short circuits.Reverse polarity protection for solar system and/or battery12/24V automatic detectionIntegrated overload protectionQuality product from Victron EnergyScope of delivery1x Victron Energy SCC010020060 PWM DUO LCD&USB 12/24V-20A1x instruction manual

The mppt 100/20 from Victron Energy (mpn scc110020170r) is part of the BlueSolar mppt family of charge controllers and offers ultra-fast power tracking that can increase the yield of your solar system. mppt: Ultrafast Maximum Power Point Tracking By continuously monitoring the voltage and current output of your solar (PV) modules, mppt technology ensures that all the energy available is actually being drawn from the modules and stored. The benefit of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Features Suitable for 12v/24v/48V systemsShort circuit proof load outputIntelligent battery management with Battery LifeProgrammable battery charging algorithmDay/night time control and light dimming optionIntelligent VE.Direct data communication port for connection with additional devices such as Bluetooth Smart Dongle or gx Color Control PanelIntegrated output short circuit / over temperature protection remote monitoring and control You can remotely control and monitor the extensive features of your BlueSolar mppt charger by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your system is connected to the Victron remote management internet portal (vrm) via a gx device, you have full access to your mppt anytime, anywhere. Both VictronConnect and vrm are available free of charge. Load output Battery over-discharge can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a predefined voltage value. Alternatively, an intelligent battery management algorithm can be selected: see Battery Life.The load output is short-circuit proof. Some loads (especially inverters) are best connected directly to the battery. Inverter remote control is best connected to the load output. A special interface cable may be required, please refer to the manual. Battery Life: Intelligent battery management if the solar charge controller is not able to charge the battery to its full capacity within one day, the battery status will constantly alternate between "partially charged" and "end of discharge". This mode of operation (no regular full charging) damages a battery within a few weeks or months.The Battery Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold day by day (i.e., disconnects the load earlier) until the energy gained is sufficient to charge the battery to near 100%. From this point, the load disconnection threshold is modulated so that charging to near 100% is achieved about once a week. Technical data Battery voltage (automatic selection): 12v/24v/48VRated charging current: 20ANominal PV power 12v / 24v / 48v: 290w / 580w / 1160WMax. PV open circuit voltage: 100VPeak efficiency: 98%Charging algorithm: multi-stage, adaptiveOperating temperature range: -30°C - +60°CProtection class: ip43 (electronic components), ip22 (connection area)Dimensions: 100 x 113 x 60 mmWeight: 0,65 kg Scope of delivery: 1x Victron scc110020170r BlueSolar mppt 100/20 charge controller

The mppt 100/20 from Victron Energy (mpn scc110020170r) is part of the BlueSolar mppt family of charge controllers and offers ultra-fast power tracking that can increase the yield of your solar system. mppt: Ultrafast Maximum Power Point Tracking By continuously monitoring the voltage and current output of your solar (PV) modules, mppt technology ensures that all the energy available is actually being drawn from the modules and stored. The benefit of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Features Suitable for 12v/24v/48V systemsShort circuit proof load outputIntelligent battery management with Battery LifeProgrammable battery charging algorithmDay/night time control and light dimming optionIntelligent VE.Direct data communication port for connection with additional devices such as Bluetooth Smart Dongle or gx Color Control PanelIntegrated output short circuit / over temperature protection remote monitoring and control You can remotely control and monitor the extensive features of your BlueSolar mppt charger by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your system is connected to the Victron remote management internet portal (vrm) via a gx device, you have full access to your mppt anytime, anywhere. Both VictronConnect and vrm are available free of charge. Load output Battery over-discharge can be prevented by connecting all loads to the load output. The load output disconnects the loads when the battery has been discharged to a predefined voltage value. Alternatively, an intelligent battery management algorithm can be selected: see Battery Life.The load output is short-circuit proof. Some loads (especially inverters) are best connected directly to the battery. Inverter remote control is best connected to the load output. A special interface cable may be required, please refer to the manual. Battery Life: Intelligent battery management if the solar charge controller is not able to charge the battery to its full capacity within one day, the battery status will constantly alternate between "partially charged" and "end of discharge". This mode of operation (no regular full charging) damages a battery within a few weeks or months.The Battery Life algorithm monitors the battery's state of charge and, if necessary, raises the load disconnect threshold day by day (i.e., disconnects the load earlier) until the energy gained is sufficient to charge the battery to near 100%. From this point, the load disconnection threshold is modulated so that charging to near 100% is achieved about once a week. Technical data Battery voltage (automatic selection): 12v/24v/48VRated charging current: 20ANominal PV power 12v / 24v / 48v: 290w / 580w / 1160WMax. PV open circuit voltage: 100VPeak efficiency: 98%Charging algorithm: multi-stage, adaptiveOperating temperature range: -30°C - +60°CProtection class: ip43 (electronic components), ip22 (connection area)Dimensions: 100 x 113 x 60 mmWeight: 0,65 kg Scope of delivery: 1x Victron scc110020170r BlueSolar mppt 100/20 charge controller

The Victron MPPT 100/30 (MPN SCC020030200) belongs to the large family of BlueSolar MPPT charge controllers and, like its larger siblings, it also offers ultra-fast power tracking and can therefore increase the yield of your solar system. Apart from the higher charging and PV output, this Blue differs even more from the lower models. This is because the 100/30 controller has the ability to fully program and save various charging algorithms. The self-created algos can then be selected directly via a switch wheel on the housing. The load output directly on the controller is no longer available from this model onwards More protection compared to the smaller models in the BlurSolar Mppt series Compared to the 75/10, 75/15 and 100/15 models, the BlueSolar 100/30 Mppt has overheating protection with a switch-off function and automatic restart after reaching a normal operating temperature. High-speed MPP tracker of the latest generationAn extremely fast MPPT controller improves the energy yield by up to 30 % compared to PWM charging controllers and by up to 10 % compared to slower MPPT controllers, especially under cloudy skies when the light intensity is constantly changing. The 100/30 also features a number of other innovative technologies such as the VE.Direct communication port.Options for programming, real-time data and history displayModern Apple and Android smartphones, tablets, Macbooks and other devices can be connected to the Bluetooth Smart Dongles and the MPPT app or the GX Color Control via VE.Direct, for example. Please note that Bluetooth Smart Dongles and GX Color Control are separate items that are not included in the scope of delivery of the charge controller but can be purchased from us as an option.Key product features of the BlueSolar 100/30 30A 12V 24V MPPT ultra-fast MPP tracker of the latest generation ensures the best possible yield even under cloudy skiesintegrated VE.Direct data communication port for connection for communication with additional devices such as Bluetooth Smart Dongle or the GX Color Control PanelHigh maximum efficiency of 98Fully programmable charging algorithms that can later be activated and used manually via a switch on the housingNominal charging current 30A, 100V maximum PV open circuit voltage440W maximum PV power for 12V, 880W for 24V systemsIntegrated protection against battery polarity reversalMulti-stage and adaptive charging algorithmDay/night time control and light dimming option VE.Direct data communication portVE.Direct in text mode transmits all important parameters to other devices connected to the charge controller every second and thus offers the option of communicating with additional devices such as the Bluetooth Smart Dongle or the GX Color Control Panel from Victron. The VE.Direct connection is intended for products where full Canbus integration (VE-Direct) would be too expensive. You can find more information about VE.Direct in our Victron brand world.Scope of delivery1x Victron SCC020030200 BlueSolar MPPT 100/30 12V 24V 30A charge controllerOperating instructions