NOQON solar charge controller monitor NSM1The NOQON solar charge controller monitor NSM1 can be connected to an MPPT solar charge controller to display the following values: Charging current (A), solar battery voltage (V), solar power (W), solar electricity meter (Ah and WH)Suitable for the following solar charge controllers:- NOQON SCD12 MPPT solar charge controller Dual 12V 165Wp 50V 12A- NOQON SCD25 MPPT solar charge controller Dual 12V 350Wp 50V 25A- NOQON SCN20 MPPT solar charge controller 12V/24V 240Wp/480Wp 50V 20A- NOQON SCN40 MPPT solar charge controller 12V/24V 480Wp/960Wp 50V 40A

VOLTIMA Charge Monitor VBCR The VBRC monitor from VOLTIMA is the perfect addition to the VOLTIMA charge boosters. Simply connect the long cable to your charge booster and mount the display in a suitable place in your vehicle. Power is supplied via the charging booster, so no additional connection cable is required. The backlighting of the display can be adjusted according to your wishes. From now on, you are always informed about the charge status of your supply battery and the performance of the charge booster. The Charge Monitor displays the following values: Charging current (amperes) Battery voltage (volts) Charging power (watts) State of charge (Ah/Wh) Perfect interaction with the VOLTIMA charge boosters VBS25 or VBS40

The Votronic Power Control (VPC) Terra Multi-Panel (MPN 5741) is an innovative monitoring and control system that has been specially developed for use in motorhomes. The bright display provides you with the most important information about your system. At the same time, the panel offers a wide range of setting options. Compared to the combination panel 5744 (Merkur), Terra is aimed at users who also want to have the fill levels of the water tanks on the "screen". Compared to the Merkur model, Terra does not have USB charging sockets or a clock display.Highlights of the Terra VPC Kompi-Panel Voltage display for on-board and starter battery Voltage-controlled deep discharge protection for the on-board battery Switching output for an external relay as main switch Solar computer (for data see p. 55) for all VOTRONIC solar charge controllers (from 2014) and VBCS Triple Level indicator for fresh water and waste water tank Switch for the fresh water pump max. 16 A Voltage display in V for the on-board and starter battery with undervoltage protection for the on-board battery Main switch for the on-board supply via switching output 1A (e.g. via Switch Unit 40 or Switch Unit 100) Level indicator in % for fresh water and waste water tank Current solar power in W, current solar current in A Charged solar capacity in Ah, charged solar energy in kWh Compatible with all VOTRONIC solar controllers from 2014 onwards with integrated solar computerIn addition to the functions and level displays for the tanks, the VPC Terra Panel also has an integrated solar computer which offers the same range of functions as the Votronic Solar Computer S 1250, which is available separately. The solar display is compatible with the Votronic Triple series and, with the exception of the small SR controllers, with all Votronic solar charge controllers. High-quality technology, stable construction and modern design are the hallmarks of the Info Panel Pro series. Self-explanatory symbols allow intuitive operation and the large displayed values are easy to read in all lighting conditions, even from a distance. The currently selected function is also indicated by several LEDs.Important key technical data Battery voltage on board / start: 12 / 12 and 24 V Current consumption / with USB active: 0-50 mA / Switching current main switch max. 0.3 A Switching current pump max.: 16A Display dimensions (WxHxD): 200x55x18 mm Installation dimensions (WxHxD): 175x43x12 mm Weight: 175 grams Scope of delivery:1x Votronic 5741 VPC Terra combination panel + operating instructions

NOQON solar charge controller monitor VSM1 The NOQON solar charge controller monitor NSM1 can be connected to an MPPT solar charge controller to display the following values: Charging current (A), solar battery voltage (V), solar power (W), solar electricity meter (Ah and WH) Suitable for the following solar charge controllers: - NOQON SCD12 MPPT solar charge controller Dual 12V 165Wp 50V 12A - NOQON SCD25 MPPT solar charge controller Dual 12V 350Wp 50V 25A - NOQON SCN20 MPPT solar charge controller 12V/24V 240Wp/480Wp 50V 20A - NOQON SCN40 MPPT solar charge controller 12V/24V 480Wp/960Wp 50V 40A

The Votronic VPC Power Control Merkur (MPN 5744) is part of an innovative series of combi panels that have been specially developed for installation in motorhomes. Merkur functions as a control board and can, for example, take over important switching functions based on parameters such as temperature or battery voltage via the integrated switching output. Merkur's LCD display provides up-to-date data on the charging voltage of the board and service battery. Another highlight is the integrated solar computer, which is identical to the LCD Solar Computer S in terms of functionality and display. It is compatible with most Votronic solar charge controllers and the Triple series.The bright display provides you with the most important information about your system. And shows the time. The two built-in USB charging sockets, each with 2.5A output power at 5V, provide additional convenience. Merkur's range of services is rounded off with the temperature display for the vehicle interior and the outside temperature. The two required temperature sensors are already included in the scope of delivery.Highlights of the VPC Merkur at a glance Voltage display for on-board and starter battery Voltage-controlled deep discharge protection for the on-board battery Switching output for an external relay as main switch Integrated solar computer (see page 55 for data) for all VOTRONIC solar charge controllers (from 2014) and VBCS Triple displays: current solar power in W, current solar current in A, charged solar capacity in Ah, charged solar energy in kWh Voltage display in V of the on-board and starter battery with undervoltage protection for the on-board battery Main switch for the on-board supply via switching output 1A (e.g. via Switch Unit 40 or Switch Unit 100) Solid technology in a stylish design with high ease of useHigh-quality technology, stable construction and modern design are the hallmarks of the combi panels. Self-explanatory symbols allow intuitive operation, with the large values displayed being easy to read in all lighting conditions, even from a distance. The currently selected function is also indicated by several LEDs.Important key technical data Battery voltage on board / start: 12 / 12 and 24 V Current consumption / with USB active: 0-50 mA / Switching current main switch max. 0.3 A Switching current pump max.: 16A Display dimensions (WxHxD): 200x65x30 mm Installation dimensions (WxHxD): 185x57x24 mm Weight: 200 grams Scope of delivery:1x Votronic 5744 VPC Merkur Combi Panel +1x operating instructions1x temperature sensor for indoor use1x temperature sensor for outside