Battery temperature sensor with 3 m connection cable and M8 mounting hole. Potted against environmental influencesSuitable for all VOTRONIC automatic chargers of the Pb and VAC series, VCC charging converters and solar controllers of the SR and MPP series.

for connecting all standard charge controllers to an existing Schaudt electric block (EBL).Features Length: 1m For all standard charge controllers Scope of delivery1 x EBL connection cable 1m

Bluetooth Connector S-BC from Votronic The Votronic Energy Monitor consists of a special communication module (Bluetooth Connector S-BC) which, in conjunction with a Votronic solar charge controller (from 2014 serial number (serial number 14Vxx.xxxxx)) with LCD Solar Computer S and/or the LCD Battery Computer S or VPC Jupiter with Smart Shunt, also transmits the values shown on the corresponding display to a mobile device via Bluetooth. The required app for Android or IOS is available free of charge in the Google Play Store or IOS App Store Connecting the Bluetooth Connector S-BC is very easy. It is simply plugged between the Votronic solar charge controller and the LCD Solar Computer S or between the Smart Shunt and the LCD Battery Computer S or VPC Jupiter using the modular cable included in the scope of delivery. The device has 2 inputs and 2 outputs, so that 1 solar controller with LCD solar computer and 1 Smart Shunt with LCD battery computer or VPC Jupiter can be connected together to a communication module. In this way, all the information from the on-board battery, such as voltage, charging and discharging currents and the remaining capacity, as well as all the data from the solar system can be conveniently read via a cell phone or tablet. In addition, the most important data is logged, graphically processed and stored for a longer period of time. It is even possible to output the data as a CSV file for your own analysis purposes. Of course, the Bluetooth Connector S-BC can also be retrofitted at any time. Technical features Connection via Bluetooth 4.0 (2.4Ghz) Range up to 50 outdoors Compatible with Votronic solar controller, VBCS Triple Charger, LCD battery computer and VPC Jupiter Dimensions HxWxD in mm: 75 x 47 x 24 Weight: 37g Test mark: CE, E-test (EMC/vehicle directive) Scope of delivery: Votronic Bluetooth Connector S-BC (MPN 1430), operating instructions, 2 x control cable 6-pin 1m long

Modular cable 6-pin as before but without connectorSuitable for: Battery computer, ammeter, solar display, solar computer, remote controls for Automatic Charger, MobilPOWER Inverter etc.Length: 5 mModular cable 6-pin WITHOUT connector

The Votronic 2088 temperature sensor 625 is functionally identical to the temperature sensor 825, but the 625 is designed for M6 screw terminals. The temperature sensor is supplied with a 3 m connection cable. The sensor is encapsulated and thus optimally protected against environmental influences. Suitable for the following Votronic articles: Automatic chargers of the Pb and VAC seriesVCC series charging convertersSolar controllers of the SR and MPP series Scope of delivery: 1x Votronic 2088 temperature sensor 625 M6

The Solar Data Extender combines the data from up to three solar controllers so that they can be shown on a single display. The familiar LCD display can still be used. It is compatible with the following devices: Solar charge controllers in SR and MPP technology (from serial no. 14Vxx.xxxxx) Battery Charger type VBCS Triple LCD Solar Computer S (from serial no. 15V40.xxxxx) LCD Charge Control S VPC series with solar function Bluetooth Connector S-BC Installation and connection The Solar Data Extender can be retrofitted at any time. It has three independent inputs (IN1, IN2, IN3). The signals are combined and made available via the output (OUT). A solar display (e.g. LCD Solar Computer S) can be connected there. It is connected between the Votronic solar charge controller and the solar display (e.g. LCD Solar Computer S) using the modular cable included in the scope of delivery. The IN1 connection must always be connected, as this is used to supply power to the device. Technical data Data Extender 3 in 1 Nominal voltage (supply via connected devices) 12 and 24 Operating voltage range [V] 8 - 32 Current consumption in standby, typical [mA] 0.7 Current consumption during activity, typical [mA} 10 Dimensions (WxHxD) in [mm] 75 x 47 x 24 Weight in [g] 37 Test mark CE, E-test (EMC/vehicle directive) Ambient conditions, humidity: max. 95% room humidity, non-condensing Scope of delivery: 3 pcs. control cable 6-pin 0.5 m long, operating instructions