The Growatt SPH4600TL BL-UP hybrid inverter supports solar modules with an output of up to 8200W. It offers a scalable system configuration and a UPS function with a switchover time of 10ms. In addition, the single-phase inverter enables intelligent load management via a potential-free contact. With these functions, the inverter offers a flexible and reliable solution for solar projects. About the SPH4600TL BL-UP inverter Two MPP trackers (Maximum Power Point)UPS function, 10ms switching timeIntelligent load management via potential-free contactScalable system configurationVPP interface readyIntelligent remote monitoring and maintenanceSupports lithium and lead-acid batteriesDC/AC ratio up to 1.5LCD+LED displayComplies with CE, VDE0126-1-1, etc. Hybrid inverter Compared to conventional inverters, hybrid inverters offer the option of not only feeding the generated solar power into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by primarily using the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the SPH inverter. When entered directly on the device, a priority mode can only be set for one period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid.Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated.Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any grid voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt SPH automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the solar system and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking By using Maximum Power Point Tracking (MPPT) technology, the optimum yield is achieved in a solar system. The MIC inverter has an MPPT that sets the ideal ratio between voltage and current during the course of the day according to the solar radiation and the module temperature of the solar modules. Thanks to the wide MPPT voltage range, many solar modules can be connected, which enables efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated intelligent load management enables efficient and precise control of energy consumption. Electrical loads can be intelligently controlled and prioritized via the potential-free contact. This function makes it possible to automatically detect the energy demand and make optimum use of the available energy. Intelligent load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your solar system. Growatt monitoring platform The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) as well as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends.The following Shine options are compatible with the SPH series: ShineWiFi-XShineLink-XShine4G-XShineMaster Technical data Recommended module power: up to 8200 WMax. DC voltage: 550 VStarting voltage: 120 VMPPT voltage range: 120-550 V/360 VBattery voltage range: 42~59 VMax. Charge/discharge current: 85 AContinuous charge/discharge power: 4000 WAC rated power: 4600 WMax. Apparent power: 4600 VAMax. AC output power: 4000 WMax. Output current: 17.4 AAC nominal voltage range: 230V (180Vac-270Vac)AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz)Housing classification: IP65Manufacturer's warranty: 10 yearsMaximum efficiency of 97.4%Dimensions: 420 x 560 x 180mmWeight: 31 kg Scope of delivery 1x Growatt SPH4600TL BL-UP inverter

Growatt MIN 2500TL-XH 2.5kW Hybrid inverter 1-phase With a hybrid inverter, the electricity produced in the solar system can be temporarily stored in a storage battery. This ensures increased self-consumption of solar power and brings you a step closer to self-sufficiency. This hybrid inverter is compatible with the following battery modules: Growatt ARK HV and Growatt ARK XHThe optimal performance of the MIN-2500TL-XH is supported by 2 MPP trackers. The device also has active arc protection and a clear overview with 24-hour self-consumption monitoring. The inverter has a maximum efficiency of 98.2% and the maximum output power is 2500W. The product is compatible with a system of up to 5kWP. An OLED display and touch function make the inverter user-friendly. Specifications: Efficiency up to 98.2% DC voltage range 70V - 500VPanel power up to 5000W.Can charge batteries up to 6000W and supply 2500W AC to the gridBuilt-in DC switch for solar cellsNo noise as the inverter is equipped with its own cooling systemIP652 x MPPT trackers. (useful if you have 2 solar panels on different sides of your roof, for example)Growatt warranty: see downloads Product warranty inverter: 10 years Installation of the inverter We always recommend that you contact an authorized electrician when connecting your inverter to ensure a safe and legal installation. Warranty: 10 year Growatt warranty (see warranty document in downloads) Scope of delivery: 1x Growatt MIN 2500TL-XH 2.5kW Hybrid Inverter 1-phase

Growatt MIN 3600TL-XH 3.6kW Hybrid inverter 1-phase With a hybrid inverter, the electricity produced in the solar system can be stored temporarily. This ensures increased self-consumption of solar power and brings you a step closer to self-sufficiency. This hybrid inverter is compatible with the following battery modules: Growatt ARK HV and Growatt ARK XH The optimal performance of the MIN-3600TL-XH is supported by 2 MPP trackers. The device also has active arc protection and a clear overview with 24-hour self-consumption monitoring. The inverter has a maximum efficiency of 98.2% and the maximum output power is 3600W. The product is compatible with a system of up to 7.2kWP. An OLED display and touch function make the inverter user-friendly. Specifications: Efficiency up to 98.2% DC voltage range 70V - 550VPanel power up to 7200W.Can supply 3600W alternating current to the gridBuilt-in DC switch for solar cellsNo noise as the inverter is equipped with its own cooling systemIP652 x MPPT trackers. (useful if you have 2 solar panels on different sides of your roof, for example)Growatt warranty: see downloads Product warranty inverter: 10 years Installation of the inverter We always recommend that you contact an authorized electrician when connecting your inverter to ensure a safe and legal installation. Warranty: 10 year Growatt warranty (see warranty document in downloads) Scope of delivery: 1x Growatt MIN 3600TL-XH 2.5kW Hybrid Inverter 1-phase

Growatt MIN 3000TL-XH 3kW Hybrid inverter 1-phase With a hybrid inverter, the electricity produced in the solar system can be stored temporarily. This ensures increased self-consumption of solar power and brings you a step closer to self-sufficiency. This hybrid inverter is compatible with the following battery modules: Growatt ARK HV and Growatt ARK XH The optimal performance of the MIN-3000TL-XH is supported by 2 MPP trackers. The device also has active arc protection and a clear overview with 24-hour self-consumption monitoring. The inverter has a maximum efficiency of 98.2% and the maximum output power is 3000W. The product is compatible with a system of up to 6kWP. An OLED display and touch function make the inverter user-friendly. Specifications: Efficiency up to 98.2% DC voltage range 70V - 550VPanel power up to 6000W.Can charge batteries up to 6000W and supply 3000W AC to the gridBuilt-in DC switch for solar cellsNo noise as the inverter is equipped with its own cooling systemIP652 x MPPT trackers. (useful if you have 2 solar panels on different sides of your roof, for example)Growatt warranty: see downloads Product warranty inverter: 10 years Installation of the inverter We always recommend that you contact an authorized electrician when connecting your inverter to ensure a safe and legal installation. Warranty: 10 year Growatt warranty (see warranty document in downloads) Scope of delivery: 1x Growatt MIN 3000TL-XH 2.5kW Hybrid Inverter 1-phase

The Growatt SPH4000TL BL-UP hybrid inverter supports solar modules with an output of up to 7600W. It offers a scalable system configuration and a UPS function with a switchover time of 10ms. In addition, the single-phase inverter enables intelligent load management via a potential-free contact. With these functions, the inverter offers a flexible and reliable solution for solar projects. About the SPH4000TL BL-UP inverter Two MPP trackers (Maximum Power Point)UPS function, 10ms switching timeIntelligent load management via potential-free contactScalable system configurationVPP interface readyIntelligent remote monitoring and maintenanceSupports lithium and lead-acid batteriesDC/AC ratio up to 1.5LCD+LED displayComplies with CE, VDE0126-1-1, etc. Hybrid inverter Compared to conventional inverters, hybrid inverters offer the option of not only feeding the generated solar power into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by primarily using the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the SPH inverter. When entered directly on the device, a priority mode can only be set for one period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid.Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated.Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any grid voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt SPH automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the solar system and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking By using Maximum Power Point Tracking (MPPT) technology, the optimum yield is achieved in a solar system. The MIC inverter has an MPPT that sets the ideal ratio between voltage and current during the course of the day according to the solar radiation and the module temperature of the solar modules. Thanks to the wide MPPT voltage range, many solar modules can be connected, which enables efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated intelligent load management enables efficient and precise control of energy consumption. Electrical loads can be intelligently controlled and prioritized via the potential-free contact. This function makes it possible to automatically detect the energy demand and make optimum use of the available energy. Intelligent load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your solar system. Growatt monitoring platform The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) as well as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends.The following Shine options are compatible with the SPH series: ShineWiFi-XShineLink-XShine4G-XShineMaster Technical data Recommended module power: up to 7600 WMax. DC voltage: 550 VStarting voltage: 120 VMPPT voltage range: 120-550 V/360 VBattery voltage range: 42~59 VMax. Charge/discharge current: 85 AContinuous charge/discharge power: 4000 WAC rated power: 4000 WMax. Apparent power: 4000 VAMax. AC output power: 4000 WMax. Output current: 17.4 AAC nominal voltage range: 230V (180Vac-270Vac)AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz)Housing classification: IP65Manufacturer's warranty: 10 yearsMaximum efficiency of 97.3%Dimensions: 420 x 560 x 180mmWeight: 31 kg Scope of delivery 1x Growatt SPH4000TL BL-UP inverter

Der Growatt MID 15KTL3-XH Hybrid-Wechselrichter ist ein 3-phasiges Kraftpaket, der mit erstaunlicher Leistung und seiner vielseitigen Funktionen große Solaranlagen mühelos in Betrieb nimmt. Der Inverter zeichnet sich neben einem hohen Wirkungsgrad von 98,75% auch durch seine Kompaktheit und Benutzerfreundlichkeit aus. Das macht ihn zu einen treuen Partner bei der Konfiguration einer Anlage. Der Wechselrichter trumpft mit 2 unabhängigen MPPT-Eingängen auf und kann eine beeindruckende PV-Leistung von 30000W bewältigen. Für die Bedienung ist er mit einem OLED-Touch-Display ausgestattet, was für eine spielend leichte und unkomplizierte Steuerung sorgt. Darüber hinaus bietet der Inverter die Möglichkeit, Lasten und Batterien anzuschließen. Hierzu kompatibel ist das APX-Batteriesystem von Growatt. Optional kann die MID-XH - Serie mit der SYN 100 XH 30 - Backup-Box kombiniert werden, um einen Offgrid-Betrieb zu erreichen. Die MID-XH Serie: 2 unabhängige MPPTsBattery-ready, zukunftssicherTyp II SPD auf DC- und AC-SeiteIntegrierte AFCI-FunktionOLED, LED und Touch TasteDC/AC-Verhältnis bis zu 2,024h Eigenverbrauchs-Monitoring10 Jahre Herstellergarantie Hybrid-Wechselrichter Im Gegensatz zu herkömmlichen Wechselrichtern können Hybrid-Wechselrichter den erzeugten Strom aus der Solaranlage nicht nur in das Stromnetz einspeisen, sondern auch in Batterien speichern. Dadurch wird der Solarstrom auch dann verfügbar, wenn die Sonne nicht scheint. Ein weiteres Merkmal von Hybrid-Wechselrichtern ist ihre Fähigkeit, den Stromverbrauch eines Haushalts zu optimieren, indem sie den Solarstrom bevorzugt direkt im Haushalt nutzen, bevor er ins Netz eingespeist wird.  Aktive Sicherheit mit AFCI-Funktion Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen.  Umgangssprachlich wird der AFCI auch Brandschutzschalter genannt, da durch eigehende Signale Überhitzungen an schlechten Kontaktstellen oder bei Überschlägen zwischen zwei Leitern, Brände verhindert werden können. Zwei MPP-Tracker für optimale Solar-Erträge Mit der Maximum Power Point Tracker Technologie wird der bestmögliche Ertrag einer Solaranlage generiert. Der MPPT stellt dabei im Tagesverlauf das optimale Verhältnis zwischen Bestrahlungsstärke, Temperatur am Modul und Solarzellentyp fest. Durch die zwei MPP-Tracker im MID-Inverter kann der optimale Arbeitspunkt für die zwei PV-Stränge getrennt voneinander optimiert werden. Die beiden Tracker arbeiten unabhängig voneinander und so hätte z.B. eine Verschattung bei einem Strang keinen Einfluss auf den zweiten. Betriebs-Modi - Je nach System-Anforderungen konfigurierbar Arbeitsmodus: Wenn die Anforderungen für di Netzverbindung erfüllt sind - die Gleichstromspannung ist größer als 200V und die Netzspannung und -Frequenz liegen im zulässigen Bereich, wird der Wechselrichter die von den Solarpanelen erzeugte Gleichstromleistung in Wechselstromleistung umwandeln und sie mit der grünen LED-Anzeige ins Netz einspeisen. Wenn die Gleichstromspannung unter 160V fällt, wird der Wechselrichter automatisch von der Netzverbindung getrennt und den Betriebsmodus verlassen. Er wird automatisch in den Betriebsmodus zurückkehren und sich wieder mit dem Netz verbinden, sobald die Anforderungen erfüllt sind. Fehlermodus: Wenn eine unerwartete Situation auftritt, wie zum Beispiel ein Systemausfall oder ein Wechselrichterausfall, wird der Wechselrichter die Fehlermeldung auf den Bildschirm anzeigen. Im Fehlermodus wird die blattförmige Anzeige rot leuchten und der Wechselrichter wird vom netz getrennt. Abschaltmodus: Wenn die PV-Leistung unzureichend ist oder keine PV-Leistung erzeugt wird, wird der Wechselrichter automatisch heruntergefahren. Im Abschaltmodus verbraucht der Wechselrichter keine Energie aus dem netz oder den Solarpanelen und das Display, sowie die Anzeigen werden ausgeschaltet. AC&DC Typ II SPD AC- und DC-Typ II SPDs (Surge Protective Devices) schützen Netz-Inverter vor Überspannungen und sind eine wichtige Komponente für die Sicherheit und Zuverlässigkeit von Solaranlagen. AC-SPDs schützen die Wechselstromseite und DC-SPDs die Gleichstromseite des Inverters. Diese Schutzeinrichtungen leiten überschüssige Spannungsimpulse ab, die durch Blitzschläge, Schaltvorgänge im Stromnetz oder andere Ereignisse verursacht werden können. Zahlreiche Schutzfunktionen DC- / AC-Überspannungsableiter: Typ IIDC-Verpolungsschutz und -TrennschalterIsolationswiderstandserkennungAC-KurzschlussschutzNetz-, Fehlerstrom- und String-ÜberwachungInselnetzerkennungAFCI-Schutz (Fehlerlichtbogenerkennung) Growatt Überwachungsplattform Durch die Verwendung des optionalen Zubehörs aus der Shine-Serie kann die Growatt Monitoring-Plattform genutzt werden. Diese ist sowohl als Smartphone-App für iOS und Android als auch als Webversion verfügbar. Das Shine-Zubehör muss separat erworben werden, die Nutzung der Plattform ist jedoch kostenlos. Mit Shine kannst du alle Ihre Growatt-Produkte konfigurieren und überwachen sowie deinen Eigenverbrauch und Trends anzeigen lassen. Mit der MID-XH-Serie sind folgende Shine-Optionen kompatibel: Shine WiFi-XShineLan-XShineLink-X Technische Daten Eingang (DC) Max. PV-Leistung: 30000WMax. Eingangsspannung: 1100VStart-Spannung: 200VNennspannung: 600VMPPT-Spannungsbereich: 160-1000VMax. Eingangsstrom pro MPPT: 32AMax. Kurzschlussstrom pro MPPT: 40AAnzahl unabhängige MPPT: 2 Eingang (DC-Batterie) Kompatibel mit APX HV BatteriesystemBetriebsspannungsbereich: 600-980VMax. Betriebsstrom: 25A pro AnschlussMax. Ladeleistung: 15000W pro AnschlussMax. Entladeleistung: 15000W Ausgang (AC) AC-Nennleistung: 15000WMax. AC-Betriebsleistung: 16500VAAC-Nennspannungsbereich: 220V/380V, 230V/400V (340-44V0)Frequenzbereich: 50/60 Hz (45-55Hz/55-65Hz)Max. Ausgangsstrom: 25A Allgemein Max. Wirkungsgrad: 98,75%Abmessungen: 580 x 435 x 230 mmGewicht: 31 kgBetriebstemperaturbereich: -25°C - +60°CSchutzklasse: IP66Herstellergarantie: 10 Jahre Lieferumfang 1x Growatt MID 15KTL3-XH Hybrid-Wechselrichter

Der Growatt MID 30KTL3-XH Hybrid-Wechselrichter ist ein 3-phasiges Kraftpaket, der mit erstaunlicher Leistung und seiner vielseitigen Funktionen große Solaranlagen mühelos in Betrieb nimmt. Der Inverter zeichnet sich neben einem hohen Wirkungsgrad von 98,80% auch durch seine Kompaktheit und Benutzerfreundlichkeit aus. Das macht ihn zu einen treuen Partner bei der Konfiguration einer Anlage. Der Wechselrichter trumpft mit 3 unabhängigen MPPT-Eingängen auf und kann eine beeindruckende PV-Leistung von 60000W bewältigen. Für die Bedienung ist er mit einem OLED-Touch-Display ausgestattet, was für eine spielend leichte und unkomplizierte Steuerung sorgt. Darüber hinaus bietet der Inverter die Möglichkeit, Lasten und Batterien anzuschließen. Hierzu kompatibel ist das APX-Batteriesystem von Growatt. Optional kann die MID-XH - Serie mit der SYN 100 XH 30 - Backup-Box kombiniert werden, um einen Offgrid-Betrieb zu erreichen. Die MID-XH Serie: 3 unabhängige MPPTsBattery-ready, zukunftssicherTyp II SPD auf DC- und AC-SeiteIntegrierte AFCI-FunktionOLED, LED und Touch TasteDC/AC-Verhältnis bis zu 2,024h Eigenverbrauchs-Monitoring10 Jahre Herstellergarantie Hybrid-Wechselrichter Im Gegensatz zu herkömmlichen Wechselrichtern können Hybrid-Wechselrichter den erzeugten Strom aus der Solaranlage nicht nur in das Stromnetz einspeisen, sondern auch in Batterien speichern. Dadurch wird der Solarstrom auch dann verfügbar, wenn die Sonne nicht scheint. Ein weiteres Merkmal von Hybrid-Wechselrichtern ist ihre Fähigkeit, den Stromverbrauch eines Haushalts zu optimieren, indem sie den Solarstrom bevorzugt direkt im Haushalt nutzen, bevor er ins Netz eingespeist wird.  Aktive Sicherheit mit AFCI-Funktion Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen.  Umgangssprachlich wird der AFCI auch Brandschutzschalter genannt, da durch eigehende Signale Überhitzungen an schlechten Kontaktstellen oder bei Überschlägen zwischen zwei Leitern, Brände verhindert werden können. Zwei MPP-Tracker für optimale Solar-Erträge Mit der Maximum Power Point Tracker Technologie wird der bestmögliche Ertrag einer Solaranlage generiert. Der MPPT stellt dabei im Tagesverlauf das optimale Verhältnis zwischen Bestrahlungsstärke, Temperatur am Modul und Solarzellentyp fest. Durch die zwei MPP-Tracker im MID-Inverter kann der optimale Arbeitspunkt für die zwei PV-Stränge getrennt voneinander optimiert werden. Die beiden Tracker arbeiten unabhängig voneinander und so hätte z.B. eine Verschattung bei einem Strang keinen Einfluss auf den zweiten. Betriebs-Modi - Je nach System-Anforderungen konfigurierbar Arbeitsmodus: Wenn die Anforderungen für di Netzverbindung erfüllt sind - die Gleichstromspannung ist größer als 200V und die Netzspannung und -Frequenz liegen im zulässigen Bereich, wird der Wechselrichter die von den Solarpanelen erzeugte Gleichstromleistung in Wechselstromleistung umwandeln und sie mit der grünen LED-Anzeige ins Netz einspeisen. Wenn die Gleichstromspannung unter 160V fällt, wird der Wechselrichter automatisch von der Netzverbindung getrennt und den Betriebsmodus verlassen. Er wird automatisch in den Betriebsmodus zurückkehren und sich wieder mit dem Netz verbinden, sobald die Anforderungen erfüllt sind. Fehlermodus: Wenn eine unerwartete Situation auftritt, wie zum Beispiel ein Systemausfall oder ein Wechselrichterausfall, wird der Wechselrichter die Fehlermeldung auf den Bildschirm anzeigen. Im Fehlermodus wird die blattförmige Anzeige rot leuchten und der Wechselrichter wird vom netz getrennt. Abschaltmodus: Wenn die PV-Leistung unzureichend ist oder keine PV-Leistung erzeugt wird, wird der Wechselrichter automatisch heruntergefahren. Im Abschaltmodus verbraucht der Wechselrichter keine Energie aus dem netz oder den Solarpanelen und das Display, sowie die Anzeigen werden ausgeschaltet. AC&DC Typ II SPD AC- und DC-Typ II SPDs (Surge Protective Devices) schützen Netz-Inverter vor Überspannungen und sind eine wichtige Komponente für die Sicherheit und Zuverlässigkeit von Solaranlagen. AC-SPDs schützen die Wechselstromseite und DC-SPDs die Gleichstromseite des Inverters. Diese Schutzeinrichtungen leiten überschüssige Spannungsimpulse ab, die durch Blitzschläge, Schaltvorgänge im Stromnetz oder andere Ereignisse verursacht werden können. Zahlreiche Schutzfunktionen DC- / AC-Überspannungsableiter: Typ IIDC-Verpolungsschutz und -TrennschalterIsolationswiderstandserkennungAC-KurzschlussschutzNetz-, Fehlerstrom- und String-ÜberwachungInselnetzerkennungAFCI-Schutz (Fehlerlichtbogenerkennung) Growatt Überwachungsplattform Durch die Verwendung des optionalen Zubehörs aus der Shine-Serie kann die Growatt Monitoring-Plattform genutzt werden. Diese ist sowohl als Smartphone-App für iOS und Android als auch als Webversion verfügbar. Das Shine-Zubehör muss separat erworben werden, die Nutzung der Plattform ist jedoch kostenlos. Mit Shine kannst du alle Ihre Growatt-Produkte konfigurieren und überwachen sowie deinen Eigenverbrauch und Trends anzeigen lassen. Mit der MID-XH-Serie sind folgende Shine-Optionen kompatibel: Shine WiFi-XShineLan-XShineLink-X Technische Daten Eingang (DC) Max. PV-Leistung: 60000WMax. Eingangsspannung: 1100VStart-Spannung: 200VNennspannung: 600VMPPT-Spannungsbereich: 160-1000VMax. Eingangsstrom pro MPPT: 32AMax. Kurzschlussstrom pro MPPT: 40AAnzahl unabhängige MPPT: 3 Eingang (DC-Batterie) Kompatibel mit APX HV BatteriesystemBetriebsspannungsbereich: 600-980VMax. Betriebsstrom: 25A pro AnschlussMax. Ladeleistung: 15000W pro AnschlussMax. Entladeleistung: 30000W Ausgang (AC) AC-Nennleistung: 30000WMax. AC-Betriebsleistung: 30000VAAC-Nennspannungsbereich: 220V/380V, 230V/400V (340-44V0)Frequenzbereich: 50/60 Hz (45-55Hz/55-65Hz)Max. Ausgangsstrom: 45,5A Allgemein Max. Wirkungsgrad: 98,80%Abmessungen: 580 x 435 x 230 mmGewicht: 31 kgBetriebstemperaturbereich: -25°C - +60°CSchutzklasse: IP66Herstellergarantie: 10 Jahre Lieferumfang 1x Growatt MID 30KTL3-XH Hybrid-Wechselrichter

The Growatt MOD 8KTL3-XH hybrid inverter (MPN MOD 8KTL3-XH) is a 3-phase inverter that ensures simple and user-friendly operation of large solar systems thanks to its high performance and compact size. The inverter is characterized by a high efficiency of 98.6%, which makes it a powerful and flexible device when configuring a system. In addition to 2 independent MPPT inputs and a maximum PV power of 16000W, the inverter also has an OLED touch display, which is a great advantage for simple and uncomplicated operation. Loads and batteries can also be connected. The ARK XH battery system from 7.68-25.6 kWh is compatible with this. The MOD-XH series: 2 independent MPPTsBattery-ready, future-proofType II SPD on DC and AC sideIntegrated AFCI functionSupport for export limitationOLED and touch buttonDC/AC ratio up to 2.0 Hybrid inverters In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the solar system into the grid, but also store it in batteries. This means that the solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before feeding it into the grid. Active safety with AFCI function An Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. In addition to providing protection, it analyzes current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. Colloquially, the AFCI is also known as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a solar system. The MPPT determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the MOD Inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Operating modes - configurable according to system requirements Working mode: The MOD-XH converts the DC power from PV strings into AC power and feeds this into the power grid. As soon as the output power does not meet the requirements for grid-connected power generation, the normal operating mode is switched off.Fault mode: The inverter monitors and regulates the status of the system in real time. For example, if system or inverter faults occur, the display shows the fault information and disconnects the inverter output from the grid.Switch-off mode: The inverter switches off automatically when solar radiation is weak or absent. AC&DC Type II SPD AC and DC Type II SPDs (Surge Protective Devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of solar systems. AC SPDs protect the AC side and DC SPDs protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions DC / AC surge arrester: Type IIDC reverse polarity protection and disconnectorInsulation resistance detectionAC short-circuit protectionMains, residual current and string monitoringIslanding detectionAFCI protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can use Shine to configure and monitor all your Growatt products and display self-consumption and trends.The following Shine options are compatible with the MOD 3-15KTL3-X/XH series: ShineWiFi-XShine4G-XShineLan-XShineLink-X Technical data Input (DC) Max. PV line: 16000WMax. Input voltage: 1100VStart voltage: 160VNominal voltage: 600VMPPT-Spannungsbereich: 140-1000VMax. Input current per MPPT: 16AMax. Short-circuit current per MPPT: 20A Input (DC battery) Compatible with ARK XH battery systemOperating voltage range: 600-950VMax. Operating current: 18.5AMax. Charging power: 10000WMax. Discharge power: 8800W Output (AC) Rated AC power: 8000WNominal AC voltage range: 220V/380V, 230V/400V (340-44V0)Frequency range: 50/60 Hz (45-55Hz/55-65Hz)Max. Output current: 13.3A general Max. Efficiency: 98.6%Dimensions: 425 x 387 x 178 mmWeight: 14 kgOperating temperature range: -25°C - +60°CProtection class: IP66Manufacturer's warranty: 5 years Scope of delivery 1x Growatt MOD 8KTL3-XH hybrid inverter

The Growatt MOD 7KTL3-XH hybrid inverter (MPN MOD 7KTL3-XH) is a 3-phase inverter that ensures simple and user-friendly operation of large solar systems thanks to its high performance and compact size. The inverter is characterized by a high efficiency of 98.6%, which makes it a powerful and flexible device when configuring a system. In addition to 2 independent MPPT inputs and a maximum PV power of 14000W, the inverter also has an OLED touch display, which is a great advantage for simple and uncomplicated operation. Loads and batteries can also be connected. The ARK XH battery system from 7.68-25.6 kWh is compatible with this. The MOD-XH series: 2 independent MPPTsBattery-ready, future-proofType II SPD on DC and AC sideIntegrated AFCI functionSupport for export limitationOLED and touch buttonDC/AC ratio up to 2.0 Hybrid inverters In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the solar system into the grid, but also store it in batteries. This means that the solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before feeding it into the grid. Active safety with AFCI function An Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. In addition to providing protection, it analyzes current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. Colloquially, the AFCI is also known as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a solar system. The MPPT determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the MOD Inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Operating modes - configurable according to system requirements Working mode: The MOD-XH converts the DC power from PV strings into AC power and feeds this into the power grid. As soon as the output power does not meet the requirements for grid-connected power generation, the normal operating mode is switched off.Fault mode: The inverter monitors and regulates the status of the system in real time. For example, if system or inverter faults occur, the display shows the fault information and disconnects the inverter output from the grid.Switch-off mode: The inverter switches off automatically when solar radiation is weak or absent. AC&DC Type II SPD AC and DC Type II SPDs (Surge Protective Devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of solar systems. AC SPDs protect the AC side and DC SPDs protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions DC / AC surge arrester: Type IIDC reverse polarity protection and disconnectorInsulation resistance detectionAC short-circuit protectionMains, residual current and string monitoringIslanding detectionAFCI protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can use Shine to configure and monitor all your Growatt products and display self-consumption and trends.The following Shine options are compatible with the MOD 3-15KTL3-X/XH series: ShineWiFi-XShine4G-XShineLan-XShineLink-X Technical data Input (DC) Max. PV line: 14000WMax. Input voltage: 1100VStart voltage: 160VNominal voltage: 600VMPPT-Spannungsbereich: 140-1000VMax. Input current per MPPT: 16AMax. Short-circuit current per MPPT: 20A Input (DC battery) Compatible with ARK XH battery systemOperating voltage range: 600-950VMax. Operating current: 18.5AMax. Charging power: 10000WMax. Discharge power: 7700W Output (AC) Rated AC power: 7000WNominal AC voltage range: 220V/380V, 230V/400V (340-44V0)Frequency range: 50/60 Hz (45-55Hz/55-65Hz)Max. Output current: 11.7A general Max. Efficiency: 98.6%Dimensions: 425 x 387 x 178 mmWeight: 14 kgOperating temperature range: -25°C - +60°CProtection class: IP66Manufacturer's warranty: 5 years Scope of delivery 1x Growatt MOD 7KTL3-XH hybrid inverter

Der Growatt MID 17KTL3-XH Hybrid-Wechselrichter ist ein 3-phasiges Kraftpaket, der mit erstaunlicher Leistung und seiner vielseitigen Funktionen große Solaranlagen mühelos in Betrieb nimmt. Der Inverter zeichnet sich neben einem hohen Wirkungsgrad von 98,75% auch durch seine Kompaktheit und Benutzerfreundlichkeit aus. Das macht ihn zu einen treuen Partner bei der Konfiguration einer Anlage. Der Wechselrichter trumpft mit 2 unabhängigen MPPT-Eingängen auf und kann eine beeindruckende PV-Leistung von 34000W bewältigen. Für die Bedienung ist er mit einem OLED-Touch-Display ausgestattet, was für eine spielend leichte und unkomplizierte Steuerung sorgt. Darüber hinaus bietet der Inverter die Möglichkeit, Lasten und Batterien anzuschließen. Hierzu kompatibel ist das APX-Batteriesystem von Growatt. Optional kann die MID-XH - Serie mit der SYN 100 XH 30 - Backup-Box kombiniert werden, um einen Offgrid-Betrieb zu erreichen. Die MID-XH Serie: 2 unabhängige MPPTsBattery-ready, zukunftssicherTyp II SPD auf DC- und AC-SeiteIntegrierte AFCI-FunktionOLED, LED und Touch TasteDC/AC-Verhältnis bis zu 2,024h Eigenverbrauchs-Monitoring10 Jahre Herstellergarantie Hybrid-Wechselrichter Im Gegensatz zu herkömmlichen Wechselrichtern können Hybrid-Wechselrichter den erzeugten Strom aus der Solaranlage nicht nur in das Stromnetz einspeisen, sondern auch in Batterien speichern. Dadurch wird der Solarstrom auch dann verfügbar, wenn die Sonne nicht scheint. Ein weiteres Merkmal von Hybrid-Wechselrichtern ist ihre Fähigkeit, den Stromverbrauch eines Haushalts zu optimieren, indem sie den Solarstrom bevorzugt direkt im Haushalt nutzen, bevor er ins Netz eingespeist wird.  Aktive Sicherheit mit AFCI-Funktion Bei einem Arc Fault Circuit Interrupter handelt es sich um eine Fehlerlichtbogen-Schutzeinrichtung. Sie schützt Stromkreise bei Störlichtbögen und agiert in der Niederspannungsinstallation als Schutzschalter gegen Kontaktfehler. Dieser analysiert, neben seinem Schutz, Strom- und Spannungsverläufe mittels digitaler Signalverarbeitung und unterbricht Stromkreise bei Störsignaturen.  Umgangssprachlich wird der AFCI auch Brandschutzschalter genannt, da durch eigehende Signale Überhitzungen an schlechten Kontaktstellen oder bei Überschlägen zwischen zwei Leitern, Brände verhindert werden können. Zwei MPP-Tracker für optimale Solar-Erträge Mit der Maximum Power Point Tracker Technologie wird der bestmögliche Ertrag einer Solaranlage generiert. Der MPPT stellt dabei im Tagesverlauf das optimale Verhältnis zwischen Bestrahlungsstärke, Temperatur am Modul und Solarzellentyp fest. Durch die zwei MPP-Tracker im MID-Inverter kann der optimale Arbeitspunkt für die zwei PV-Stränge getrennt voneinander optimiert werden. Die beiden Tracker arbeiten unabhängig voneinander und so hätte z.B. eine Verschattung bei einem Strang keinen Einfluss auf den zweiten. Betriebs-Modi - Je nach System-Anforderungen konfigurierbar Arbeitsmodus: Wenn die Anforderungen für di Netzverbindung erfüllt sind - die Gleichstromspannung ist größer als 200V und die Netzspannung und -Frequenz liegen im zulässigen Bereich, wird der Wechselrichter die von den Solarpanelen erzeugte Gleichstromleistung in Wechselstromleistung umwandeln und sie mit der grünen LED-Anzeige ins Netz einspeisen. Wenn die Gleichstromspannung unter 160V fällt, wird der Wechselrichter automatisch von der Netzverbindung getrennt und den Betriebsmodus verlassen. Er wird automatisch in den Betriebsmodus zurückkehren und sich wieder mit dem Netz verbinden, sobald die Anforderungen erfüllt sind. Fehlermodus: Wenn eine unerwartete Situation auftritt, wie zum Beispiel ein Systemausfall oder ein Wechselrichterausfall, wird der Wechselrichter die Fehlermeldung auf den Bildschirm anzeigen. Im Fehlermodus wird die blattförmige Anzeige rot leuchten und der Wechselrichter wird vom netz getrennt. Abschaltmodus: Wenn die PV-Leistung unzureichend ist oder keine PV-Leistung erzeugt wird, wird der Wechselrichter automatisch heruntergefahren. Im Abschaltmodus verbraucht der Wechselrichter keine Energie aus dem netz oder den Solarpanelen und das Display, sowie die Anzeigen werden ausgeschaltet. AC&DC Typ II SPD AC- und DC-Typ II SPDs (Surge Protective Devices) schützen Netz-Inverter vor Überspannungen und sind eine wichtige Komponente für die Sicherheit und Zuverlässigkeit von Solaranlagen. AC-SPDs schützen die Wechselstromseite und DC-SPDs die Gleichstromseite des Inverters. Diese Schutzeinrichtungen leiten überschüssige Spannungsimpulse ab, die durch Blitzschläge, Schaltvorgänge im Stromnetz oder andere Ereignisse verursacht werden können. Zahlreiche Schutzfunktionen DC- / AC-Überspannungsableiter: Typ IIDC-Verpolungsschutz und -TrennschalterIsolationswiderstandserkennungAC-KurzschlussschutzNetz-, Fehlerstrom- und String-ÜberwachungInselnetzerkennungAFCI-Schutz (Fehlerlichtbogenerkennung) Growatt Überwachungsplattform Durch die Verwendung des optionalen Zubehörs aus der Shine-Serie kann die Growatt Monitoring-Plattform genutzt werden. Diese ist sowohl als Smartphone-App für iOS und Android als auch als Webversion verfügbar. Das Shine-Zubehör muss separat erworben werden, die Nutzung der Plattform ist jedoch kostenlos. Mit Shine kannst du alle Ihre Growatt-Produkte konfigurieren und überwachen sowie deinen Eigenverbrauch und Trends anzeigen lassen. Mit der MID-XH-Serie sind folgende Shine-Optionen kompatibel: Shine WiFi-XShineLan-XShineLink-X Technische Daten Eingang (DC) Max. PV-Leistung: 34000WMax. Eingangsspannung: 1100VStart-Spannung: 200VNennspannung: 600VMPPT-Spannungsbereich: 160-1000VMax. Eingangsstrom pro MPPT: 32AMax. Kurzschlussstrom pro MPPT: 40AAnzahl unabhängige MPPT: 2 Eingang (DC-Batterie) Kompatibel mit APX HV BatteriesystemBetriebsspannungsbereich: 600-980VMax. Betriebsstrom: 25A pro AnschlussMax. Ladeleistung: 15000W pro AnschlussMax. Entladeleistung: 17000W Ausgang (AC) AC-Nennleistung: 17000WMax. AC-Betriebsleistung: 18700VAAC-Nennspannungsbereich: 220V/380V, 230V/400V (340-44V0)Frequenzbereich: 50/60 Hz (45-55Hz/55-65Hz)Max. Ausgangsstrom: 28,3A Allgemein Max. Wirkungsgrad: 98,75%Abmessungen: 580 x 435 x 230 mmGewicht: 31 kgBetriebstemperaturbereich: -25°C - +60°CSchutzklasse: IP66Herstellergarantie: 10 Jahre Lieferumfang 1x Growatt MID 17KTL3-XH Hybrid-Wechselrichter

The Growatt MOD 4KTL3-XH-BP hybrid inverter (MPN MOD 4KTL3-XH-BP) is a 3-phase inverter that ensures simple and user-friendly operation of large solar systems thanks to its high performance and compact size. The inverter is characterized by a high efficiency of 98.3 %, which makes it a powerful and flexible device when configuring a system. In addition to 2 independent MPPT inputs and a maximum PV power of 8000W, the inverter also has an OLED touch display, which is a great advantage for simple and uncomplicated operation. Loads and batteries can also be connected. The APX battery system is compatible with this. As an option, the MOD-XH-BP series can be combined with the SYN 50 XH 30 backup box to achieve off-grid operation. The MOD-XH-BP series: 2 independent MPPTsBattery-ready, future-proofType II SPD on DC and AC sideIntegrated AFCI functionSupport for export limitationOLED and touch buttonDC/AC ratio up to 2.0Off-grid function possible with optional accessories Hybrid inverter In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the solar system into the grid, but also store it in batteries. This means that the solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before feeding it into the grid. Active safety with AFCI function An Arc Fault Circuit Interrupteris an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. In addition to providing protection, it analyzes current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. Colloquially, the AFCI is also known as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a solar system. The MPPT determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the MOD Inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Operating modes - configurable according to system requirements Working mode: The MOD-XH converts the DC power from PV strings into AC power and feeds this into the power grid. As soon as the output power does not meet the requirements for grid-connected power generation, the normal operating mode is switched off.Fault mode: The inverter monitors and regulates the status of the system in real time. For example, if system or inverter faults occur, the display shows the fault information and disconnects the inverter output from the grid.Switch-off mode: The inverter switches off automatically when solar radiation is weak or absent. AC&DC Type II SPD AC and DC Type II SPDs (Surge Protective Devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of solar systems. AC SPDs protect the AC side and DC SPDs protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions DC / AC surge arrester: Type IIDC reverse polarity protection and disconnectorInsulation resistance detectionAC short-circuit protectionMains, residual current and string monitoringIslanding detectionAFCI protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can use Shine to configure and monitor all your Growatt products and display self-consumption and trends.The following Shine options are compatible with the MOD 3-15KTL3-X/XH series: ShineWiFi-XShine4G-XShineLan-XShineLink-X Technical data Input (DC) Max. PV line: 8000WMax. Input voltage: 1100VStart voltage: 160VNominal voltage: 600VMPPT-Spannungsbereich: 140-1000VMax. Input current per MPPT: 16AMax. Short-circuit current per MPPT: 20A Input (DC battery) Compatible with ARK XH battery systemOperating voltage range: 600-950VMax. Operating current: 11AMax. Charging power: 6000WMax. Discharge power: 4400W Output (AC) Rated AC power: 4000WNominal AC voltage range: 220V/380V, 230V/400V (340-44V0)Frequency range: 50/60 Hz (45-55Hz/55-65Hz)Max. Output current: 6.7A general Max. Efficiency: 98.3%Dimensions: 425 x 387 x 147 mmWeight: 12.5 kgOperating temperature range: -25°C - +60°CProtection class: IP66Manufacturer's warranty: 5 years Scope of delivery 1x Growatt MOD 4KTL3-XH-BP hybrid inverter

The Growatt SPH10000TL3-BH-UP hybrid inverter has a maximum output power of 10000 watts. The hybrid inverter can be operated both with and without a battery. This means that the inverter is not dependent on the power grid and is therefore not affected by grid faults. You also have more flexibility with your PV system. You can use the solar power you generate yourself or simply feed it into the grid. The battery inverter also has 2 MPP trackers so that two independent strings can be connected. This feature is particularly important if, for example, part of your PV system is affected by shade at certain times of the day. The unaffected part of your system can therefore continue to generate electricity at maximum output. Quiet inverter The Growatt SPH10000TL3-BH-UP hybrid inverter uses a special GT topology, which means there is no need for a fan or transformer. Thanks to these properties, the inverter does not cause any noise emissions and is therefore also perfectly suited for installations in residential buildings. The inverter also has a very long service life thanks to the natural cooling. Yield The Growatt SPH10000TL3-BH-UP hybrid inverter has a maximum efficiency of 97.5%. With a storable solution and dynamic control, you can also manage the inverter yourself. Growatt online service The inverter includes a permanent monitoring option via LAN, WiFi or a combination of RF / UTP (Shinelink). Growatt offers an intelligent online service for remote rectification of technical problems and updates. Customer service is also available to you as an end customer 365 days a year, around the clock. This allows you to take action yourself in the event of faults and rectify them with the help of customer service, without having to rely on your installer. These functions and services make the inverter a safe choice for your PV system. Growatt also offers you a ten-year manufacturer's warranty on your device. The SPH 10000TL3-BH-UP inverter from Growatt has these interfaces: RS485CANUSBRF(optional)WIFI(optional)GPRS(optional)To be able to use the WiFi functions of the hybrid inverter, you need the Growatt ShineWiFi-X, which is available separately. Included in the order: Growatt SmartMeter

The Growatt MOD 10KTL3-XH-BP hybrid inverter (MPN MOD 10KTL3-XH-BP) is a 3-phase inverter that ensures simple and user-friendly operation of large solar systems thanks to its high performance and compact size. The inverter is characterized by a high efficiency of 98.6%, which makes it a powerful and flexible device when configuring a system. In addition to 2 independent MPPT inputs and a maximum PV power of 20000W, the inverter also has an OLED touch display, which is a great advantage for simple and uncomplicated operation. Loads and batteries can also be connected. The APX battery system is compatible with this. As an option, the MOD-XH-BP series can be combined with the SYN 50 XH 30 backup box to achieve off-grid operation. The MOD-XH-BP series: 2 independent MPPTsBattery-ready, future-proofType II SPD on DC and AC sideIntegrated AFCI functionSupport for export limitationOLED and touch buttonDC/AC ratio up to 2.0Off-grid function possible with optional accessories Hybrid inverter In contrast to conventional inverters, hybrid inverters can not only feed the electricity generated by the solar system into the grid, but also store it in batteries. This means that the solar power is also available when the sun is not shining. Another feature of hybrid inverters is their ability to optimize a household's electricity consumption by preferring to use the solar power directly in the household before feeding it into the grid. Active safety with AFCI function An Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. In addition to providing protection, it analyzes current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. Colloquially, the AFCI is also known as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a solar system. The MPPT determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the MOD Inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Operating modes - configurable according to system requirements Working mode: The MOD-XH converts the DC power from PV strings into AC power and feeds this into the power grid. As soon as the output power does not meet the requirements for grid-connected power generation, the normal operating mode is switched off.Fault mode: The inverter monitors and regulates the status of the system in real time. For example, if system or inverter faults occur, the display shows the fault information and disconnects the inverter output from the grid.Switch-off mode: The inverter switches off automatically when solar radiation is weak or absent. AC&DC Type II SPD AC and DC Type II SPDs (Surge Protective Devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of solar systems. AC SPDs protect the AC side and DC SPDs protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions DC / AC surge arrester: Type IIDC reverse polarity protection and disconnectorInsulation resistance detectionAC short-circuit protectionMains, residual current and string monitoringIslanding detectionAFCI protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can use Shine to configure and monitor all your Growatt products and display self-consumption and trends.The following Shine options are compatible with the MOD 3-15KTL3-X/XH series: ShineWiFi-XShine4G-XShineLan-XShineLink-X Technical data Input (DC) Max. PV line: 20000WMax. Input voltage: 1100VStart voltage: 160VNominal voltage: 600VMPPT-Spannungsbereich: 140-1000VMax. Input current per MPPT: 16AMax. Short-circuit current per MPPT: 20A Input (DC battery) Compatible with ARK XH battery systemOperating voltage range: 600-950VMax. Operating current: 18.5AMax. Charging power: 10000WMax. Discharge power: 11000W Output (AC) Rated AC power: 10000WNominal AC voltage range: 220V/380V, 230V/400V (340-44V0)Frequency range: 50/60 Hz (45-55Hz/55-65Hz)Max. Output current: 16.7A general Max. Efficiency: 98.6%Dimensions: 425 x 387 x 178 mmWeight: 14 kgOperating temperature range: -25°C - +60°CProtection class: IP66Manufacturer's warranty: 5 years Scope of delivery 1x Growatt MOD 10KTL3-XH-BP hybrid inverter

The compact MIN 4600TL-XH hybrid inverter from Growatt (MPN: MIN 4600-XH) is ideal for anyone who values future-proofing combined with low investment costs. With its two MPP trackers and numerous protection functions, the single-phase PV inverter ensures optimum energy yield. Thanks to a battery interface, the device can be expanded into a storage system in no time at all. It is also possible to limit the grid feed-in thanks to the export limitation. Battery-compatible, future-proof The XH series represents the latest generation of intelligent grid-connected inverters for use in private households and is characterized by its high level of adaptability. With its integrated battery interface, it enables effortless expansion to a storage system in the future without the need for additional devices or retrofitting costs. In addition, the XH series offers double the performance to meet the requirements. Introducing the Growatt MIN-XH Two MPP trackers1-phaseType II SPD on the DC sideMax. efficiency 98.4%AFCI function optionalTouch button and OLED display24h self-consumption monitoringcompatible with the ARK 2.5H-A1 battery with BDC as BMS Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology generates the best possible yield from a solar system. The MPPT determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the MOD Inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. AC&DC type II SPD AC and DC type II SPDs (Surge Protective Devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of solar systems. AC SPDs protect the AC side and DC SPDs protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Arc Fault Circuit Interrupter (AFCI technology) This process was developed to prevent fires caused by arcing in incorrectly installed or damaged PV modules, connectors or cables. To minimize this risk, Growatt offers an optional arc detection system that provides greater safety and protection for your PV system. The technology can be used to detect and interrupt potential fire hazards. Monitoring with the Shine series Use the Growatt monitoring platform with the optional Shine series accessories! The platform is available as a free smartphone app for iOS and Android and can also be accessed via the web version. The accessories must be purchased separately. With the help of Shine, all Growatt products can be configured and monitored, and self-consumption and trends can be displayed. The following Shine options are compatible with the MID series: ShineWiFi-XShineLink-XShine4G-XShineLan-X Technical data max. PV power (STC): 9200Wmax. input voltage: 550Vnominal DC voltage: 360VMPP voltage range: 70V-550VNumber of independent MPP trackers: 2Number of strings per MPP tracker: 1max. input current per MPP tracker: 13.5AMax. short-circuit current per MPP tracker: 16.9AOperating voltage range: 360-550V (DC battery)AC rated power: 4600WRated AC voltage: 230VAC mains frequency: 50/60 Hzmax. efficiency 98.4%Max. output current: 20.9 AProtection class: IP65Operating temperature range: -25°C - +60°CDimensions: 375 x 350 x 160 mmWeight: 10.8 kg Scope of delivery: 1x Growatt MIN 4600TL-XH hybrid inverter

The Growatt SPH3600TL BL-UP hybrid inverter supports solar modules with an output of up to 7200W. It offers a scalable system configuration and a UPS function with a switchover time of 10ms. In addition, the single-phase inverter enables intelligent load management via a potential-free contact. With these functions, the inverter offers a flexible and reliable solution for solar projects. About the SPH3600TL BL-UP inverter Two MPP trackers (Maximum Power Point)UPS function, 10ms switching timeIntelligent load management via potential-free contactScalable system configurationVPP interface readyIntelligent remote monitoring and maintenanceSupports lithium and lead-acid batteriesDC/AC ratio up to 1.5LCD+LED displayComplies with CE, VDE0126-1-1, etc. Hybrid inverter Compared to conventional inverters, hybrid inverters offer the option of not only feeding the generated solar power into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by primarily using the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the SPH inverter. When entered directly on the device, a priority mode can only be set for one period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid.Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated.Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any grid voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt SPH automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the solar system and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking By using Maximum Power Point Tracking (MPPT) technology, the optimum yield is achieved in a solar system. The MIC inverter has an MPPT that sets the ideal ratio between voltage and current during the course of the day according to the solar radiation and the module temperature of the solar modules. Thanks to the wide MPPT voltage range, many solar modules can be connected, which enables efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated intelligent load management enables efficient and precise control of energy consumption. Electrical loads can be intelligently controlled and prioritized via the potential-free contact. This function makes it possible to automatically detect the energy demand and make optimum use of the available energy. Intelligent load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your solar system. Growatt monitoring platform The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) as well as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends.The following Shine options are compatible with the SPH series: ShineWiFi-XShineLink-XShine4G-XShineMaster Technical data Recommended module power: up to 7200 WMax. DC voltage: 550 VStarting voltage: 120 VMPPT voltage range: 120-550 V/360 VBattery voltage range: 42~59 VMax. Charge/discharge current: 75 AContinuous charge/discharge power: 3680 WAC rated power: 3680 WMax. Apparent power: 3680 VAMax. AC output power: 3680 WMax. Output current: 17.4 AAC nominal voltage range: 230V (180Vac-270Vac)AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz)Housing classification: IP65Manufacturer's warranty: 10 yearsMaximum efficiency of 97.2%Dimensions: 420 x 560 x 180mmWeight: 31kg Scope of delivery 1x Growatt SPH3600TL BL-UP inverter

The compact MIN 4200TL-XH hybrid inverter from Growatt (MPN: MIN 4200-XH) is ideal for anyone who values future-proofing combined with low investment costs. With its two MPP trackers and numerous protection functions, the single-phase PV inverter ensures optimum energy yield. Thanks to a battery interface, the device can be expanded into a storage system in no time at all. It is also possible to limit the grid feed-in thanks to the export limitation. Battery-compatible, future-proof The XH series represents the latest generation of intelligent grid-connected inverters for use in private households and is characterized by its high level of adaptability. With its integrated battery interface, it enables effortless expansion to a storage system in the future without the need for additional devices or retrofitting costs. In addition, the XH series offers double the performance to meet the requirements. Introducing the Growatt MIN-XH Two MPP trackers1-phaseType II SPD on the DC sideMax. efficiency 98.4%AFCI function optionalTouch button and OLED display24h self-consumption monitoringcompatible with the ARK 2.5H-A1 battery with BDC as BMS Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology generates the best possible yield from a solar system. The MPPT determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the MOD Inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. AC&DC type II SPD AC and DC type II SPDs (Surge Protective Devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of solar systems. AC SPDs protect the AC side and DC SPDs protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Arc Fault Circuit Interrupter (AFCI technology) This process was developed to prevent fires caused by arcing in incorrectly installed or damaged PV modules, connectors or cables. To minimize this risk, Growatt offers an optional arc detection system that provides greater safety and protection for your PV system. The technology can be used to detect and interrupt potential fire hazards. Monitoring with the Shine series Use the Growatt monitoring platform with the optional Shine series accessories! The platform is available as a free smartphone app for iOS and Android and can also be accessed via the web version. The accessories must be purchased separately. With the help of Shine, all Growatt products can be configured and monitored, and self-consumption and trends can be displayed. The following Shine options are compatible with the MID series: ShineWiFi-XShineLink-XShine4G-XShineLan-X Technical data max. PV power (STC): 8400Wmax. input voltage: 550Vnominal DC voltage: 360VMPP voltage range: 70V-550VNumber of independent MPP trackers: 2Number of strings per MPP tracker: 1max. input current per MPP tracker: 13.5AMax. short-circuit current per MPP tracker: 16.9AOperating voltage range: 360-500V (DC battery)AC rated power: 4200WRated AC voltage: 230VAC mains frequency: 50/60 Hzmax. efficiency 98.4%max. output current: 19 AProtection class: IP65Operating temperature range: -25°C - +60°CDimensions: 375 x 350 x 160 mmWeight: 10.8 kg Scope of delivery: 1x Growatt MIN 4200 TL-XH hybrid inverter

The Growatt SPH3000TL BL-UP hybrid inverter supports solar systems with a total output of up to 6000W. It offers a scalable system configuration and an uninterruptible power supply with a switchover time of 10ms. In addition, the single-phase inverter enables intelligent load management via a potential-free contact. With these functions, the inverter offers a flexible and reliable solution for solar projects. About the SPH3000TL BL-UP inverter Two MPP trackers (Maximum Power Point)UPS function, 10ms switching timeIntelligent load management via potential-free contactScalable system configurationVPP interface readyIntelligent remote monitoring and maintenanceSupports lithium and lead-acid batteriesDC/AC ratio up to 1.5LCD+LED displayComplies with CE, VDE0126-1-1, etc. Hybrid inverter Compared to conventional inverters, hybrid inverters offer the option of not only feeding the generated solar power into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by primarily using the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the SPH inverter. When entered directly on the device, a priority mode can only be set for one period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid.Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated.Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any grid voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt SPH automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the solar system and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking By using Maximum Power Point Tracking (MPPT) technology, the optimum yield is achieved in a solar system. The MIC inverter has an MPPT that sets the ideal ratio between voltage and current during the course of the day according to the solar radiation and the module temperature of the solar modules. Thanks to the wide MPPT voltage range, many solar modules can be connected, which enables efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated intelligent load management enables efficient and precise control of energy consumption. Electrical loads can be intelligently controlled and prioritized via the potential-free contact. This function makes it possible to automatically detect the energy demand and make optimum use of the available energy. Intelligent load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your solar system. Growatt monitoring platform The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) as well as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends.The following Shine options are compatible with the SPH series: ShineWiFi-XShineLink-XShine4G-XShineMaster Technical data Recommended module power: up to 6000 WMax. DC voltage: 550 VStarting voltage: 120 VMPPT voltage range: 120-550 V/360 VBattery voltage range: 42~59 VMax. Charge/discharge current: 66 AContinuous charge/discharge power: 3000 WAC rated power: 3000 WMax. Apparent power: 3000 VAMax. AC output power: 3000 WMax. Output current: 17.4 AAC nominal voltage range: 230V (180Vac-270Vac)AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz)Housing classification: IP65Manufacturer's warranty: 10 yearsMaximum efficiency of 97.2%Dimensions: 420 x 560 x 180mmWeight: 31 kg Scope of delivery 1x Growatt SPH3000TL BL-UP inverter

The SPA 6000TL3 BH-UP from Growatt is a 3-phase grid inverter that provides a state-of-the-art solution for your solar projects. With three programmable operating modes, a VPP interface and a wide battery voltage range of 100-550V, it offers efficiency and flexibility. In addition, it supports retrofits and new systems and ensures compatibility with high-voltage batteries. About the SPA 6000TL3 BH-UP inverter 100% three-phase unbalanced outputIntelligent power control at phase levelIntelligent load control via dry contactWide battery voltage range 100-550 VUPS function, 10ms transferVPP interfaceProgrammable operating modesDisplay via LED and LCDSupports lithium and lead-acid batteriesEasy installation Intelligent load management The inverter's integrated smart load control enables precise and efficient control of energy consumption. By using a potential-free contact, electrical loads can be controlled intelligently and prioritized. This function enables automatic detection of energy requirements and optimum use of the available energy. Smart load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your solar system. Growatt monitoring platform By using the optional accessories of the Shine series, you can use the Growatt monitoring platform. This platform is available as a smartphone app for iOS and Android as well as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. You can configure and monitor all your Growatt products via Shine, and it also allows you to view self-consumption and track trends.The following Shine options are compatible with the SPA series: ShineWiFi-XShineLink-XShine4G-XShineMaster Operating modes - Configurable according to system requirements Online mode Users can set an appropriate priority mode in online mode according to the request while the SPA is working. If the LCD and button settings are used, only one time period can be set. However, if the website settings are used, up to three time periods can be set for the priority mode Load First: With an inverter in the SPA system, the energy from the inverter is optimized for the load and then the battery is charged. Excess energy is exported to the grid. Without an inverter or if the energy is low, the battery discharges first for the load and the grid supplies the energy if the battery capacity is insufficient.Battery First: When the SPA series operates in this mode, the battery is charged first. This is suitable for periods of low power consumption. The switch-on and switch-off times of the mode and the end time of the battery charge level must be set. It is also possible to set a power that is lower than the maximum output power of the battery. With an inverter in the SPA system, the energy from the inverter is first used for the battery, then for the load. The grid supplies the energy if the power of the inverter is not sufficient. Without an inverter or if its energy is too low, the battery and the load are supplied by the grid.Grid First: When the SPA series is operating in grid-first mode, the energy is fed into the grid first. Time periods can be set when the power consumption is too high. The switch-on and switch-off times of the mode and the end time of the battery state of charge must be set here. A power can be set that is lower than the maximum output power of the battery. With an inverter in the SPA system, the battery discharges to the load. If the sum of the inverter power and the battery power is greater than the load, excess energy flows into the grid. Without an inverter or if the energy of the inverter is too low, the battery discharges to the load and excess energy flows into the grid. Backup mode: If the grid fails, the system switches to backup mode and AC power is output via the EPS LOAD connection using all the energy from the battery. Note that the maximum output power of the SPA in this mode is 10,000W and the load connected to the EPS LOAD port should be less than 10,000W. Note: You can only set a time period for "Battery First" and "Grid First" on the LCD. If you want to set more, you can do so via the Shineserver. Error mode: The SPA's intelligent control system continuously monitors and adjusts the status of the system. When the inverter detects unexpected events such as system error or machine error, the LCD display will show the error information and the LED light will light up in error mode. Programming mode: Programming mode indicates that the SPA system is being updated. The power supply should not be interrupted during the process. The inverter will automatically log out when the update is complete and switch to another mode. Verification mode: Before the SPA operates in normal mode, it will switch to self-check mode. If everything is OK then, the system will switch to normal mode. Otherwise, the error mode will respond. Standby mode: If the system has no errors but the conditions are not met, the SPA will remain in standby mode. Technical data AC rated power: 6000WAC rated voltage range: 230/400V (310-476V)Frequency range: 50/60Hz, ±5HzMax. Output current: 9.1ABattery voltage range: 100-550VMax. Charging and discharging current: 25AIP protection class: IP65Manufacturer's warranty: 10 yearsOperating temperature range: -25°C - +60°CMaximum efficiency of 98Dimensions: 505 x 453 x 198 mmWeight: 28 kg Scope of delivery 1x Growatt SPA 6000TL3 BH-UP grid inverter

The Growatt SPH3000TL BL-UP hybrid inverter supports solar systems with a total output of up to 6000W. It offers a scalable system configuration and an uninterruptible power supply with a switchover time of 10ms. In addition, the single-phase inverter enables intelligent load management via a potential-free contact. With these functions, the inverter offers a flexible and reliable solution for solar projects. About the SPH3000TL BL-UP inverter Two MPP trackers (Maximum Power Point)UPS function, 10ms switching timeIntelligent load management via potential-free contactScalable system configurationVPP interface readyIntelligent remote monitoring and maintenanceSupports lithium and lead-acid batteriesDC/AC ratio up to 1.5LCD+LED displayComplies with CE, VDE0126-1-1, etc. Hybrid inverter Compared to conventional inverters, hybrid inverters offer the option of not only feeding the generated solar power into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by primarily using the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the SPH inverter. When entered directly on the device, a priority mode can only be set for one period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid.Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated.Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any grid voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt SPH automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the solar system and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking By using Maximum Power Point Tracking (MPPT) technology, the optimum yield is achieved in a solar system. The MIC inverter has an MPPT that sets the ideal ratio between voltage and current during the course of the day according to the solar radiation and the module temperature of the solar modules. Thanks to the wide MPPT voltage range, many solar modules can be connected, which enables efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated intelligent load management enables efficient and precise control of energy consumption. Electrical loads can be intelligently controlled and prioritized via the potential-free contact. This function makes it possible to automatically detect the energy demand and make optimum use of the available energy. Intelligent load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your solar system. Growatt monitoring platform The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) as well as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends.The following Shine options are compatible with the SPH series: ShineWiFi-XShineLink-XShine4G-XShineMaster Technical data Recommended module power: up to 6000 WMax. DC voltage: 550 VStarting voltage: 120 VMPPT voltage range: 120-550 V/360 VBattery voltage range: 42~59 VMax. Charge/discharge current: 66 AContinuous charge/discharge power: 3000 WAC rated power: 3000 WMax. Apparent power: 3000 VAMax. AC output power: 3000 WMax. Output current: 17.4 AAC nominal voltage range: 230V (180Vac-270Vac)AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz)Housing classification: IP65Manufacturer's warranty: 10 yearsMaximum efficiency of 97.2%Dimensions: 420 x 560 x 180mmWeight: 31 kg Scope of delivery 1x Growatt SPH3000TL BL-UP inverter

Growatt MIN 2500TL-XH 2.5kW Hybrid inverter 1-phase With a hybrid inverter, the electricity produced in the solar system can be temporarily stored in a storage battery. This ensures increased self-consumption of solar power and brings you a step closer to self-sufficiency. This hybrid inverter is compatible with the following battery modules: Growatt ARK HV and Growatt ARK XHThe optimal performance of the MIN-2500TL-XH is supported by 2 MPP trackers. The device also has active arc protection and a clear overview with 24-hour self-consumption monitoring. The inverter has a maximum efficiency of 98.2% and the maximum output power is 2500W. The product is compatible with a system of up to 5kWP. An OLED display and touch function make the inverter user-friendly. Specifications: Efficiency up to 98.2% DC voltage range 70V - 500VPanel power up to 5000W.Can charge batteries up to 6000W and supply 2500W AC to the gridBuilt-in DC switch for solar cellsNo noise as the inverter is equipped with its own cooling systemIP652 x MPPT trackers. (useful if you have 2 solar panels on different sides of your roof, for example)Growatt warranty: see downloads Product warranty inverter: 10 years Installation of the inverter We always recommend that you contact an authorized electrician when connecting your inverter to ensure a safe and legal installation. Warranty: 10 year Growatt warranty (see warranty document in downloads) Scope of delivery: 1x Growatt MIN 2500TL-XH 2.5kW Hybrid Inverter 1-phase

Growatt MIN 3000TL-XH 3kW Hybrid inverter 1-phase With a hybrid inverter, the electricity produced in the solar system can be stored temporarily. This ensures increased self-consumption of solar power and brings you a step closer to self-sufficiency. This hybrid inverter is compatible with the following battery modules: Growatt ARK HV and Growatt ARK XH The optimal performance of the MIN-3000TL-XH is supported by 2 MPP trackers. The device also has active arc protection and a clear overview with 24-hour self-consumption monitoring. The inverter has a maximum efficiency of 98.2% and the maximum output power is 3000W. The product is compatible with a system of up to 6kWP. An OLED display and touch function make the inverter user-friendly. Specifications: Efficiency up to 98.2% DC voltage range 70V - 550VPanel power up to 6000W.Can charge batteries up to 6000W and supply 3000W AC to the gridBuilt-in DC switch for solar cellsNo noise as the inverter is equipped with its own cooling systemIP652 x MPPT trackers. (useful if you have 2 solar panels on different sides of your roof, for example)Growatt warranty: see downloads Product warranty inverter: 10 years Installation of the inverter We always recommend that you contact an authorized electrician when connecting your inverter to ensure a safe and legal installation. Warranty: 10 year Growatt warranty (see warranty document in downloads) Scope of delivery: 1x Growatt MIN 3000TL-XH 2.5kW Hybrid Inverter 1-phase

Growatt MIN 3600TL-XH 3.6kW Hybrid inverter 1-phase With a hybrid inverter, the electricity produced in the solar system can be stored temporarily. This ensures increased self-consumption of solar power and brings you a step closer to self-sufficiency. This hybrid inverter is compatible with the following battery modules: Growatt ARK HV and Growatt ARK XH The optimal performance of the MIN-3600TL-XH is supported by 2 MPP trackers. The device also has active arc protection and a clear overview with 24-hour self-consumption monitoring. The inverter has a maximum efficiency of 98.2% and the maximum output power is 3600W. The product is compatible with a system of up to 7.2kWP. An OLED display and touch function make the inverter user-friendly. Specifications: Efficiency up to 98.2% DC voltage range 70V - 550VPanel power up to 7200W.Can supply 3600W alternating current to the gridBuilt-in DC switch for solar cellsNo noise as the inverter is equipped with its own cooling systemIP652 x MPPT trackers. (useful if you have 2 solar panels on different sides of your roof, for example)Growatt warranty: see downloads Product warranty inverter: 10 years Installation of the inverter We always recommend that you contact an authorized electrician when connecting your inverter to ensure a safe and legal installation. Warranty: 10 year Growatt warranty (see warranty document in downloads) Scope of delivery: 1x Growatt MIN 3600TL-XH 2.5kW Hybrid Inverter 1-phase

The compact MIN 4200TL-XH hybrid inverter from Growatt (MPN: MIN 4200-XH) is ideal for anyone who values future-proofing combined with low investment costs. With its two MPP trackers and numerous protection functions, the single-phase PV inverter ensures optimum energy yield. Thanks to a battery interface, the device can be expanded into a storage system in no time at all. It is also possible to limit the grid feed-in thanks to the export limitation. Battery-compatible, future-proof The XH series represents the latest generation of intelligent grid-connected inverters for use in private households and is characterized by its high level of adaptability. With its integrated battery interface, it enables effortless expansion to a storage system in the future without the need for additional devices or retrofitting costs. In addition, the XH series offers double the performance to meet the requirements. Introducing the Growatt MIN-XH Two MPP trackers1-phaseType II SPD on the DC sideMax. efficiency 98.4%AFCI function optionalTouch button and OLED display24h self-consumption monitoringcompatible with the ARK 2.5H-A1 battery with BDC as BMS Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology generates the best possible yield from a solar system. The MPPT determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the MOD Inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. AC&DC type II SPD AC and DC type II SPDs (Surge Protective Devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of solar systems. AC SPDs protect the AC side and DC SPDs protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Arc Fault Circuit Interrupter (AFCI technology) This process was developed to prevent fires caused by arcing in incorrectly installed or damaged PV modules, connectors or cables. To minimize this risk, Growatt offers an optional arc detection system that provides greater safety and protection for your PV system. The technology can be used to detect and interrupt potential fire hazards. Monitoring with the Shine series Use the Growatt monitoring platform with the optional Shine series accessories! The platform is available as a free smartphone app for iOS and Android and can also be accessed via the web version. The accessories must be purchased separately. With the help of Shine, all Growatt products can be configured and monitored, and self-consumption and trends can be displayed. The following Shine options are compatible with the MID series: ShineWiFi-XShineLink-XShine4G-XShineLan-X Technical data max. PV power (STC): 8400Wmax. input voltage: 550Vnominal DC voltage: 360VMPP voltage range: 70V-550VNumber of independent MPP trackers: 2Number of strings per MPP tracker: 1max. input current per MPP tracker: 13.5AMax. short-circuit current per MPP tracker: 16.9AOperating voltage range: 360-500V (DC battery)AC rated power: 4200WRated AC voltage: 230VAC mains frequency: 50/60 Hzmax. efficiency 98.4%max. output current: 19 AProtection class: IP65Operating temperature range: -25°C - +60°CDimensions: 375 x 350 x 160 mmWeight: 10.8 kg Scope of delivery: 1x Growatt MIN 4200 TL-XH hybrid inverter

The compact MIN 4600TL-XH hybrid inverter from Growatt (MPN: MIN 4600-XH) is ideal for anyone who values future-proofing combined with low investment costs. With its two MPP trackers and numerous protection functions, the single-phase PV inverter ensures optimum energy yield. Thanks to a battery interface, the device can be expanded into a storage system in no time at all. It is also possible to limit the grid feed-in thanks to the export limitation. Battery-compatible, future-proof The XH series represents the latest generation of intelligent grid-connected inverters for use in private households and is characterized by its high level of adaptability. With its integrated battery interface, it enables effortless expansion to a storage system in the future without the need for additional devices or retrofitting costs. In addition, the XH series offers double the performance to meet the requirements. Introducing the Growatt MIN-XH Two MPP trackers1-phaseType II SPD on the DC sideMax. efficiency 98.4%AFCI function optionalTouch button and OLED display24h self-consumption monitoringcompatible with the ARK 2.5H-A1 battery with BDC as BMS Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology generates the best possible yield from a solar system. The MPPT determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the MOD Inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. AC&DC type II SPD AC and DC type II SPDs (Surge Protective Devices) protect grid inverters from overvoltages and are an important component for the safety and reliability of solar systems. AC SPDs protect the AC side and DC SPDs protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Arc Fault Circuit Interrupter (AFCI technology) This process was developed to prevent fires caused by arcing in incorrectly installed or damaged PV modules, connectors or cables. To minimize this risk, Growatt offers an optional arc detection system that provides greater safety and protection for your PV system. The technology can be used to detect and interrupt potential fire hazards. Monitoring with the Shine series Use the Growatt monitoring platform with the optional Shine series accessories! The platform is available as a free smartphone app for iOS and Android and can also be accessed via the web version. The accessories must be purchased separately. With the help of Shine, all Growatt products can be configured and monitored, and self-consumption and trends can be displayed. The following Shine options are compatible with the MID series: ShineWiFi-XShineLink-XShine4G-XShineLan-X Technical data max. PV power (STC): 9200Wmax. input voltage: 550Vnominal DC voltage: 360VMPP voltage range: 70V-550VNumber of independent MPP trackers: 2Number of strings per MPP tracker: 1max. input current per MPP tracker: 13.5AMax. short-circuit current per MPP tracker: 16.9AOperating voltage range: 360-550V (DC battery)AC rated power: 4600WRated AC voltage: 230VAC mains frequency: 50/60 Hzmax. efficiency 98.4%Max. output current: 20.9 AProtection class: IP65Operating temperature range: -25°C - +60°CDimensions: 375 x 350 x 160 mmWeight: 10.8 kg Scope of delivery: 1x Growatt MIN 4600TL-XH hybrid inverter