The Shine Lan-X data logger enables a secure and direct Ethernet connection between Growatt inverters and the Internet router. This makes it easy to monitor and maintain installed Growatt devices online. The data from the connected Growatt inverters is stored on the Shine LAN-X data logger for up to one month. The data transfer rate of the USB port is up to 12 Mbps and up to 10 Mbps via the LAN connection. Plug&PlayNo configurationImmediately ready for operation

The WiFi-F from Growatt is an easy-to-install monitoring extension for complete control of the status values of your PV system. The device is attached to the inverter, allowing the inverter to receive or send data. The maximum range is 100M. The inverter data is transmitted to the Growatt Monitoring Cloud, which can be used free of charge. The system data is visually processed and stored there. The data can be retrieved via the Shinephone app or via the browser connection.

The Growatt connection cable effortlessly connects your Growatt NEO 800M-X inverter to a conventional earthed socket. The cable is equipped with a BC05A plug (also known as a "field connector") on the inverter side and a Schuko plug on the socket side. This cable is used to connect the micro inverter to your domestic power supply. Ready for immediate use as delivered as Plug & Playfor flexible installation of the NEO 800M-X inverter in your home Technical features Manufacturer part number: Power Cord 018.0728800Cable length: 5mApplication: Connection of the NEO 800M-X Microinverter to the domestic power supply via a Schuko socket outletPlug connector on the socket outlet side: Schuko plugConnector on the inverter side: BC05A plug Compatible micro inverter Growatt NEO 800M-X micro inverter Scope of delivery: 1x Growatt Power Cord AC cable

With the Growatt ShineLink WiFi module, all inverter data is stored and can be accessed via the Shinelink. This gives a clear picture of the performance of the Growatt inverters and the data archive of the ShineLink is backed up for 30 days. The ShineLink can monitor up to 8 inverters and has a range of 120 meters. The Growatt ShineLink-X data logger (MPN: ShineLink-X) is used for online monitoring and maintenance of a Growatt inverter. Memory data is recorded over a period of one month. Data protection plays a major role in wireless communication, so this information can be encrypted. The Growatt servers are based in Frankfurt.The ShineLink-X at a glanceMonitoring of up to 8 invertersRatio frequency communication120m rangePlug and playAutomatic IP addressingEncrypted dataBuilt-in memory for one monthCable-free, easy installationGrowatt Shine monitoring platformThe Growatt monitoring platform can be used with the ShineLink-X. This is available as a smartphone app (for iOS and Android) and as a web version. Use of the platform is free of charge. All Growatt products that are owned can be configured and monitored via Shine. It is also possible to display self-consumption and trends.Compatible inverter series:MIC 600-3300TL-XMIN 2500-4600TL-X/XH/XAMOD 3-15KTL3-X/XHMID 17-22KTL3-X/XHMID 25-40KTL3-XMAX 50-80KTL3 LVMAX 100-125KTL3 LVSPH 3000-6000TL BL-UPSPH 4000-10000TL3 BH-UPSPA 4000-10000TL3 BH-UPTechnical data:Communication: Rf433 - up to 120m (under free field conditions)Input voltage AC power supply: 196-250VDimensions: 105 x 85 x 26 mmWeight: 1kgMounting: Table or wall mounting possibleProtection class: IP30Status display: LEDOperating temperature range: -20°C - +65°CManufacturer's warranty: 1 yearScope of delivery:1x ShineLan Box1x ShineRF Stick-X1x network cable

The Growatt ATS-T is a 3-phase transfer switch and controls the changeover of the switching device to provide power to the EPS load both when connected to the grid and in stand-alone operation. It is used with Growatt inverters from the SPH and SPA series. The ATS-T can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230V/400VacFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 3.8 kgDimensions: 312 x 295.4 x 85 mm Scope of delivery: 1x Growatt ATS-T 3-phase transfer switch

The TPM-E electricity meter from Growatt is a 3-phase complete solution for grid export limitation and self-consumption monitoring, the data of which can be read on an LCD display. It is characterized by high measurement accuracy and easy installation through plug and play. With RS485 communication and direct connections, the electricity meter is compatible with many Growatt inverters. Quick plug-and-play installationPrecise measurement of current consumptionFor three-phase systemsSupports zero export function with Growatt inverters Technical data Dimensions: 72 x 94.5 x 65 mmWeight: 398 gOperating temperature range: -25°C - +55°CStorage temperature range: -40°C - +70°CProtection class: IP51Power supply type: 3P4WInput voltage: 320-520V ACFrequency: 50/60 HzMax. Current: 100 ACommunication: RS485 Scope of delivery: 1x Growatt TPM-E 3-phase electricity meter

This is a Growatt cable set for SPH inverters and ARK-2.5L-A1 LV . A power cable and a communication cable for easy plug-and-play installation of Growatt ARK-2.5L-A1 lithium battery and Growatt SPH 3000 and Growatt SPH3600 . This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set for ARK-2.5L-A1 LV? Then simply contact us by e-mail or telephone.

This Growatt cable set is a necessary connection cable between the ARK 2.5H-A1 HV battery units and the SPH inverters. The kit includes power cables and a communication cable for easy plug-and-play installation of the Growatt ARK 2.5H-A1 HV lithium battery and the Growatt SPH 6000-10000 3-phase hybrid inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or telephone.

The Growatt battery cable set is required to connect Growatt ARK2.5H-A1 batteries to MIN or MOD-XH series inverters. Contents 2x 2m power cable (plus/minus)2m communication cable2m earthing cable ARK high-voltage battery system The ARK battery system from Growatt offers a high degree of flexibility thanks to its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Another innovation of the ARK system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand. Scope of delivery: 1x Growatt battery connection cable set for MIN and MOD-XH inverters

The connection cable for the APX series from Growatt connects two battery towers of the system with each other. This ensures trouble-free communication between all components. The APX battery system The Growatt APX battery system has a modular design and additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5kWh and the BMS has a maximum (discharge) current of 13A or 26A. This means that a capacity of 5-30 kWh can be achieved and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which results in a more cost-effective battery, for example. Scope of delivery: 1x Growatt APX connection cable series connection

The Growatt Shinewifi-S Wifi Stick is used to connect the hybrid inverter to the Internet. The Growatt Shinewifi-S Wifi Stick is compatible with the single-phase Growatt SPH and Growatt SPA TL3 BH inverter series.

The SPM-E electricity meter from Growatt is a complete 1-phase solution for grid export limitation and self-consumption monitoring, whose data can be read on an LCD display. It is characterized by high measurement accuracy and simple installation through plug and play. With RS485 communication and direct connections, the electricity meter is compatible with many Growatt inverters. Quick plug-and-play installationPrecise measurement of current consumptionFor single-phase systemsSupports zero export function with Growatt inverters Technical data Dimensions: 36 x 99 x 63 mmWeight: 223 gOperating temperature range: -25°C - +55°CStorage temperature range: -40°C - +70°CProtection class: IP51Current type: 1P2WInput voltage: 184 - 276V ACFrequency: 50/60 HzMax. Current: 100 ACommunication: RS485 Scope of delivery: 1x Growatt SPM-E 1-phase electricity meter

The Growatt ATS-S is a single-phase transfer switch and controls the changeover of the switching device both when connected to the power grid and in stand-alone operation in order to provide power to the EPS load. It is used with Growatt inverters from the SPH and SPA series. The ATS-S can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230 VFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 2.38 kgDimensions: 250 x 200 x 86 mm Scope of delivery: 1x Growatt ATS-S 1-phase transfer switch

This Growatt cable set is for connecting SPH inverters and 2x GBLI batteries if you want to connect two such batteries in parallel. These are power cables and communication cables for easy plug-and-play installation of the Growatt GBLI6532 lithium battery and the Growatt SPH 3000 and 3600 inverter. This Growatt cable set is mandatory when connecting two GBLI batteries to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 2 communication cables in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or give us a call.

This Growatt cable set is for SPH inverters and GBLI batteries. A power cable and a communication cable for easy plug-and-play installation of the Growatt GBLI6532 lithium battery and the Growatt SPH 3000 and 3600 inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or give us a call.

The Growatt connection cable effortlessly connects your Growatt NEO 800M-X inverter to a conventional earthed socket. The cable is equipped with a BC05A plug (also known as a "field connector") on the inverter side and a Schuko plug on the socket side. This cable is used to connect the micro inverter to your domestic power supply. Ready for immediate use as delivered as Plug & Playfor flexible installation of the NEO 800M-X inverter in your home Technical features Manufacturer part number: Power Cord 018.0728800Cable length: 5mApplication: Connection of the NEO 800M-X Microinverter to the domestic power supply via a Schuko socket outletPlug connector on the socket outlet side: Schuko plugConnector on the inverter side: BC05A plug Compatible micro inverter Growatt NEO 800M-X micro inverter Scope of delivery: 1x Growatt Power Cord AC cable

The Growatt ATS-S is a single-phase transfer switch and controls the changeover of the switching device both when connected to the power grid and in stand-alone operation in order to provide power to the EPS load. It is used with Growatt inverters from the SPH and SPA series. The ATS-S can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230 VFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 2.38 kgDimensions: 250 x 200 x 86 mm Scope of delivery: 1x Growatt ATS-S 1-phase transfer switch

The connection cable for the APX series from Growatt connects two battery towers of the system with each other. This ensures trouble-free communication between all components. The APX battery system The Growatt APX battery system has a modular design and additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5kWh and the BMS has a maximum (discharge) current of 13A or 26A. This means that a capacity of 5-30 kWh can be achieved and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which results in a more cost-effective battery, for example. Scope of delivery: 1x Growatt APX connection cable series connection

This is a Growatt cable set for SPH inverters and ARK-2.5L-A1 LV . A power cable and a communication cable for easy plug-and-play installation of Growatt ARK-2.5L-A1 lithium battery and Growatt SPH 3000 and Growatt SPH3600 . This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set for ARK-2.5L-A1 LV? Then simply contact us by e-mail or telephone.

The Growatt ATS-T is a 3-phase transfer switch and controls the changeover of the switching device to provide power to the EPS load both when connected to the grid and in stand-alone operation. It is used with Growatt inverters from the SPH and SPA series. The ATS-T can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230V/400VacFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 3.8 kgDimensions: 312 x 295.4 x 85 mm Scope of delivery: 1x Growatt ATS-T 3-phase transfer switch

This Growatt cable set is a necessary connection cable between the ARK 2.5H-A1 HV battery units and the SPH inverters. The kit includes power cables and a communication cable for easy plug-and-play installation of the Growatt ARK 2.5H-A1 HV lithium battery and the Growatt SPH 6000-10000 3-phase hybrid inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or telephone.

The TPM-E electricity meter from Growatt is a 3-phase complete solution for grid export limitation and self-consumption monitoring, the data of which can be read on an LCD display. It is characterized by high measurement accuracy and easy installation through plug and play. With RS485 communication and direct connections, the electricity meter is compatible with many Growatt inverters. Quick plug-and-play installationPrecise measurement of current consumptionFor three-phase systemsSupports zero export function with Growatt inverters Technical data Dimensions: 72 x 94.5 x 65 mmWeight: 398 gOperating temperature range: -25°C - +55°CStorage temperature range: -40°C - +70°CProtection class: IP51Power supply type: 3P4WInput voltage: 320-520V ACFrequency: 50/60 HzMax. Current: 100 ACommunication: RS485 Scope of delivery: 1x Growatt TPM-E 3-phase electricity meter

This Growatt cable set is for SPH inverters and GBLI batteries. A power cable and a communication cable for easy plug-and-play installation of the Growatt GBLI6532 lithium battery and the Growatt SPH 3000 and 3600 inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or give us a call.

This Growatt cable set is for connecting SPH inverters and 2x GBLI batteries if you want to connect two such batteries in parallel. These are power cables and communication cables for easy plug-and-play installation of the Growatt GBLI6532 lithium battery and the Growatt SPH 3000 and 3600 inverter. This Growatt cable set is mandatory when connecting two GBLI batteries to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 2 communication cables in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or give us a call.