The Shine Lan-X data logger enables a secure and direct Ethernet connection between Growatt inverters and the Internet router. This makes it easy to monitor and maintain installed Growatt devices online. The data from the connected Growatt inverters is stored on the Shine LAN-X data logger for up to one month. The data transfer rate of the USB port is up to 12 Mbps and up to 10 Mbps via the LAN connection. Plug&PlayNo configurationImmediately ready for operation

The Growatt MIC 2000TL-X inverter is a lightweight and compact on-grid inverter, also known as a micro inverter, with which you can feed your solar energy into the home grid. It is ideal for use with a small solar system, for example on balconies, garden sheds, garages or areas with shading. The inverter has 1 MPPT tracker with a maximum input current of 13A. High safety is an important aspect and is achieved through several features such as a built-in DC switch, overvoltage protection and reverse polarity protection. The inverter uses natural convection cooling, which means that there is no mechanically noisy cooling system. It also has fewer moving parts, less maintenance and a lower risk of malfunction. At just 6 kg, it is one of the smallest inverters on the market. This makes the Growatt MIC 2000TL-X inverter easy and quick to set up by an installer, saving time and money. Specifications: Efficiency up to 97.4Mpp voltage range: 50-500VMax. Output power: 2000WMax. Output current: 9.5AMax. PV input power: 2800WMaximum input current: 13ASelf-consumption at night: <0.5WMpp tracker / strings: 1Number of phases: 1DC connection: MC4Very quiet thanks to convection coolingBuilt-in DC switch for solar cellsApprovals: VDE 0126-1-1, VDE-AR-N 4105:2018 and others.IP65Dimensions (L x W x H) - 274 x 254 x 138 [mm]Weight: 6kg Installation of the inverter We always recommend that you contact an authorized electrician when connecting your inverter to ensure a safe and legal installation. Warranty: 10 year Growatt warranty (see warranty document in downloads) Installation We always recommend that you consult an authorized electrician when connecting your battery to ensure a safe and legal installation. Scope of delivery: 1x Growatt MIC 2000TL-X inverter

The WiFi-F from Growatt is an easy-to-install monitoring extension for complete control of the status values of your PV system. The device is attached to the inverter, allowing the inverter to receive or send data. The maximum range is 100M. The inverter data is transmitted to the Growatt Monitoring Cloud, which can be used free of charge. The system data is visually processed and stored there. The data can be retrieved via the Shinephone app or via the browser connection.

The Growatt connection cable effortlessly connects your Growatt NEO 800M-X inverter to a conventional earthed socket. The cable is equipped with a BC05A plug (also known as a "field connector") on the inverter side and a Schuko plug on the socket side. This cable is used to connect the micro inverter to your domestic power supply. Ready for immediate use as delivered as Plug & Playfor flexible installation of the NEO 800M-X inverter in your home Technical features Manufacturer part number: Power Cord 018.0728800Cable length: 5mApplication: Connection of the NEO 800M-X Microinverter to the domestic power supply via a Schuko socket outletPlug connector on the socket outlet side: Schuko plugConnector on the inverter side: BC05A plug Compatible micro inverter Growatt NEO 800M-X micro inverter Scope of delivery: 1x Growatt Power Cord AC cable

The Growatt MIC 1500TL-X inverter is a lightweight and compact on-grid inverter, also known as a micro inverter, with which you can feed your solar energy into the home grid. It is ideal for use with a small solar system, for example on balconies, garden sheds, garages or areas with shading. The inverter has 1 MPPT tracker with a maximum input current of 13A. High safety is an important aspect and is achieved through several features such as a built-in DC switch, overvoltage protection and reverse polarity protection. The inverter uses natural convection cooling, which means that there is no mechanically noisy cooling system. It also has fewer moving parts, less maintenance and a lower risk of malfunction. At only 6 kg. It is one of the smallest inverters on the market. This makes the Growatt MIC 1500TL-X inverter easy and quick to set up by an installer, saving time and money. Specifications: Efficiency up to 97.4Mpp voltage range: 50-500VMax. Output power: 1500WMax. Output current: 7.1AMax. PV input power: 2100WMaximum input current: 13ASelf-consumption at night: <0.5WMpp tracker / strings: 1Number of phases: 1DC connection: MC4Very quiet thanks to convection coolingBuilt-in DC switch for solar cellsApprovals: VDE 0126-1-1, VDE-AR-N 4105:2018 and others.IP65Dimensions (L x W x H) - 274 x 254 x 138 [mm]Weight: 6kg Installation of the inverter We always recommend that you contact an authorized electrician when connecting your inverter to ensure a safe and legal installation. Warranty: 10 year Growatt warranty (see warranty document in downloads) Scope of delivery: 1x Growatt MIC 1500TL-X inverter

The Growatt SPF 5000 ES Off-Grid Inverter is one of the best off-grid inverters on the market, which is ideal for stand-alone systems (e.g. summer house or allotment, etc.). With this 5000W inverter, you can keep several devices running at the same time. Of course, the inverter has a built-in MPPT tracker so that you can get the maximum benefit from your solar panels. It is possible to connect external power to the off-grid inverter either from the mains or a gasoline generator in case the battery is discharged and the solar panels do not provide the required power. The Growatt SPF 5000 ES is suitable for a maximum panel voltage of 450 V DC and can be used with or without a battery (48V). If you want to use a battery, you can either use the appropriate ones from Growatt (Growatt ARK LV or GBLI6532) or you can assemble a 48 V battery yourself, for example from 4 x 12 V or 2 x 24 V. If the capacity of a single SPF 5000 ES is not large enough, you can connect up to six units in parallel to increase the total output to up to 30kWh. The integrated MPPT charge controller optimizes the charging and discharging of the battery. Charging priorities can be set, e.g. charging from the solar system is preferred to charging from the grid if solar power is available. The inverter can be monitored via WLAN. You can use the separately available "Wi-Fi-F dongle" for this purpose. Growatt offers an intelligent online service for remote troubleshooting of technical problems and updates. As a Growatt customer, customer service is available to you around the clock, 365 days a year. This means that you can intervene yourself in the event of a fault and rectify it with the help of customer service. These functions and services make the inverter a safe choice for your solar system. Installing the inverter Detailed installation instructions can be found in the download section. We do not offer technical support for the Growatt SPF 5000 ES off-grid inverter and self-built battery systems, etc. Instead, please read the Growatt manual and consult an electrician if necessary. Scope of delivery: 1x SPF 5000 ES off-grid inverter

With the Growatt ShineLink WiFi module, all inverter data is stored and can be accessed via the Shinelink. This gives a clear picture of the performance of the Growatt inverters and the data archive of the ShineLink is backed up for 30 days. The ShineLink can monitor up to 8 inverters and has a range of 120 meters. The Growatt ShineLink-X data logger (MPN: ShineLink-X) is used for online monitoring and maintenance of a Growatt inverter. Memory data is recorded over a period of one month. Data protection plays a major role in wireless communication, so this information can be encrypted. The Growatt servers are based in Frankfurt.The ShineLink-X at a glanceMonitoring of up to 8 invertersRatio frequency communication120m rangePlug and playAutomatic IP addressingEncrypted dataBuilt-in memory for one monthCable-free, easy installationGrowatt Shine monitoring platformThe Growatt monitoring platform can be used with the ShineLink-X. This is available as a smartphone app (for iOS and Android) and as a web version. Use of the platform is free of charge. All Growatt products that are owned can be configured and monitored via Shine. It is also possible to display self-consumption and trends.Compatible inverter series:MIC 600-3300TL-XMIN 2500-4600TL-X/XH/XAMOD 3-15KTL3-X/XHMID 17-22KTL3-X/XHMID 25-40KTL3-XMAX 50-80KTL3 LVMAX 100-125KTL3 LVSPH 3000-6000TL BL-UPSPH 4000-10000TL3 BH-UPSPA 4000-10000TL3 BH-UPTechnical data:Communication: Rf433 - up to 120m (under free field conditions)Input voltage AC power supply: 196-250VDimensions: 105 x 85 x 26 mmWeight: 1kgMounting: Table or wall mounting possibleProtection class: IP30Status display: LEDOperating temperature range: -20°C - +65°CManufacturer's warranty: 1 yearScope of delivery:1x ShineLan Box1x ShineRF Stick-X1x network cable

The Growatt ATS-T is a 3-phase transfer switch and controls the changeover of the switching device to provide power to the EPS load both when connected to the grid and in stand-alone operation. It is used with Growatt inverters from the SPH and SPA series. The ATS-T can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230V/400VacFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 3.8 kgDimensions: 312 x 295.4 x 85 mm Scope of delivery: 1x Growatt ATS-T 3-phase transfer switch

The TPM-E electricity meter from Growatt is a 3-phase complete solution for grid export limitation and self-consumption monitoring, the data of which can be read on an LCD display. It is characterized by high measurement accuracy and easy installation through plug and play. With RS485 communication and direct connections, the electricity meter is compatible with many Growatt inverters. Quick plug-and-play installationPrecise measurement of current consumptionFor three-phase systemsSupports zero export function with Growatt inverters Technical data Dimensions: 72 x 94.5 x 65 mmWeight: 398 gOperating temperature range: -25°C - +55°CStorage temperature range: -40°C - +70°CProtection class: IP51Power supply type: 3P4WInput voltage: 320-520V ACFrequency: 50/60 HzMax. Current: 100 ACommunication: RS485 Scope of delivery: 1x Growatt TPM-E 3-phase electricity meter

This is a Growatt cable set for SPH inverters and ARK-2.5L-A1 LV . A power cable and a communication cable for easy plug-and-play installation of Growatt ARK-2.5L-A1 lithium battery and Growatt SPH 3000 and Growatt SPH3600 . This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set for ARK-2.5L-A1 LV? Then simply contact us by e-mail or telephone.

This Growatt cable set is a necessary connection cable between the ARK 2.5H-A1 HV battery units and the SPH inverters. The kit includes power cables and a communication cable for easy plug-and-play installation of the Growatt ARK 2.5H-A1 HV lithium battery and the Growatt SPH 6000-10000 3-phase hybrid inverter. This Growatt cable is mandatory when connecting the battery to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 1 communication cable in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or telephone.

The Growatt battery cable set is required to connect Growatt ARK2.5H-A1 batteries to MIN or MOD-XH series inverters. Contents 2x 2m power cable (plus/minus)2m communication cable2m earthing cable ARK high-voltage battery system The ARK battery system from Growatt offers a high degree of flexibility thanks to its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. Installation and expansion of the system is simple and straightforward thanks to the modular design and the use of cables. Another innovation of the ARK system is that, unlike other battery systems, no battery cabinet is required. Only a battery base is required for a stable stand. Scope of delivery: 1x Growatt battery connection cable set for MIN and MOD-XH inverters

The connection cable for the APX series from Growatt connects two battery towers of the system with each other. This ensures trouble-free communication between all components. The APX battery system The Growatt APX battery system has a modular design and additional batteries can be stacked on top of each other. The APX 5.0P-B1 has a capacity of 5kWh and the BMS has a maximum (discharge) current of 13A or 26A. This means that a capacity of 5-30 kWh can be achieved and selected. The nominal voltage per battery module is 385 V and the operating voltage range is between 330-450V. The lithium iron phosphate battery (LFP) is free of cobalt, which results in a more cost-effective battery, for example. Scope of delivery: 1x Growatt APX connection cable series connection

The Growatt Shinewifi-S Wifi Stick is used to connect the hybrid inverter to the Internet. The Growatt Shinewifi-S Wifi Stick is compatible with the single-phase Growatt SPH and Growatt SPA TL3 BH inverter series.

With the Growatt MIC 800TL-X string inverter (MPN: MIC 800TL-X), we offer a single-phase inverter that combines high yields with user-friendliness. It is particularly suitable for small PV systems and delivers up to 800W AC output power. Simply connect it to your solar system via the MC4 connection and you're ready to go. This allows you to cover part of your electricity requirements cost-effectively.The device can also be monitored and configured on the move using the Shine app or web application via an optional WLAN module. The Growatt MIC inverter at a glance Single-phase operationMaximum power point trackingConnect directly to photovoltaic modulesTouch button and OLED displayCompact design and easy installation10-year manufacturer's warrantyOptionally possible: monitoring with the Shine platform (chargeable accessory required) Why a string inverter? The output of solar modules varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur as soon as the output of a panel in a row is lower, resulting in lower electricity production for the entire row. A string inverter can reduce these losses. Maximum Power Point Tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a solar system. The MPPT of the MIC inverter sets the optimum ratio between voltage and current over the course of the day, depending on the solar radiation and the temperature of the solar modules. The wide MPPT voltage range means that a large number of solar modules can be connected and this enables efficient energy yield, the advantage of which is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and low weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connections, the connection from the solar supply to the inverter is also completed in just a few moments. The numerous protective functions ensure safe and smooth operation of the solar system. Protective devices DC reverse polarity protectionDC disconnectorDC / AC surge arrester: type IIIInsulation resistance detectionEarth fault, mains and residual current monitoringAC short-circuit protectionIsolated network detectionAFCI protection Technical data max. PV power: 1120Wmax. input voltage: 500VStart voltage: 50VNominal DC voltage: 120VMPPT voltage range: 50V-500VNominal AC power: 800WNominal AC voltage: 230VMax. Efficiency: 96.5%Operating temperature range: -25°C - +60°CProtection class: IP65Weight: 6kgDimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt MIC 800TL-X inverter1x mounting bracket1x operating instructions

The SPM-E electricity meter from Growatt is a complete 1-phase solution for grid export limitation and self-consumption monitoring, whose data can be read on an LCD display. It is characterized by high measurement accuracy and simple installation through plug and play. With RS485 communication and direct connections, the electricity meter is compatible with many Growatt inverters. Quick plug-and-play installationPrecise measurement of current consumptionFor single-phase systemsSupports zero export function with Growatt inverters Technical data Dimensions: 36 x 99 x 63 mmWeight: 223 gOperating temperature range: -25°C - +55°CStorage temperature range: -40°C - +70°CProtection class: IP51Current type: 1P2WInput voltage: 184 - 276V ACFrequency: 50/60 HzMax. Current: 100 ACommunication: RS485 Scope of delivery: 1x Growatt SPM-E 1-phase electricity meter

Der Growatt SPF 6000 ES Plus ist ein 1-phasiger Off-Grid Speicher-Wechselrichter. Ausgestattet mit zwei MPP-Trackern gewährleistet er eine effiziente Energiegewinnung selbst unter schwankenden Sonneneinstrahlungen. Dieser innovative Solarinverter eignet sich perfekt für netzunabhängige Notstromversorgung und Eigenverbrauchsanwendungen, zudem ist der Betrieb sowohl mit als auch ohne Batterie möglich. Egal, ob du nach einer autarken Lösung oder einer intelligenten Art der Stromnutzung suchst – der SPF6000 ES Plus bietet verschiedene Modi für konfigurierbare Netz- oder Solareingangsprioritäten, um deinen Präferenzen gerecht zu werden. Der SPF 6000 ES Plus Inverter im Fokus leistungsstärker mit 8000W Solarleistungfür Batterietypen: Lithium / Bleisäure / GELAusgangsleistungsfaktor bis zu 1,02 integrierte MPP-Tracker2 AC-Eingangsanschlüsse mit integriertem Umschalter2-fache Spitzenleistungsfähigkeitmit CAN/RS485 für BMS-KommumikationParallelbetrieb von bis zu 6 Gerätenoptionale WIFI/GPRS FernüberwachungSpitzenwirkungsgrad von 93% zusätzliche Besonderheiten reine SinuswelleBetrieb ohne Batterie möglichPlug & Play Schnellanschluss für PV-Klemmenstaubdichter Filter für raue Umgebungen 2 integrierte MPP-Tracker Der SPF6000 verfügt über zwei integrierte MPP-Tracker. Diese Tracker sorgen dafür, den optimalen Leistungspunkt der Solarmodule zu finden und sicherzustellen, dass die maximal verfügbare Leistung aus den Modulen gewonnen wird. Durch die Verwendung von zwei MPP-Trackern kann der Wechselrichter effizienter arbeiten, insbesondere wenn die Solaranlage aus Modulen mit unterschiedlichen Eigenschaften besteht oder sich in unterschiedlichen Neigungswinkeln befindet. Dadurch können die einzelnen MPPTs unabhängig voneinander arbeiten und die optimale Leistung aus den Solarmodulen erzielen, was zu einer verbesserten Gesamteffizienz der Solaranlage führt. Der maximale Eingangsstrom pro MPP-Tracker liegt bei 16A. Konfigurierbare Netz- oder Solareingangspriorität Die konfigurierbare Netz- oder Solareingangspriorität im Growatt SPF 6000 ES Plus ermöglicht individuelle Energieoptimierung. Du bestimmst, ob Solarenergie oder das Stromnetz vorrangig genutzt wird. Diese Anpassung sichert zuverlässige Energieversorgung – perfekt in Gebieten mit instabiler Stromversorgung oder für erneuerbare Energieprioritäten. Diese Funktion erhöht Unabhängigkeit vom Stromnetz und gewährleistet flexibles Energiemanagement nach deinen Präferenzen, während konstante Versorgung gesichert wird. Ausgleichsladefunktion Die Ausgleichsladefunktion im SPF 6000 ES Plus optimiert die Batterielebensdauer, indem sie die Ladung der Zellen gleichmäßig hält. So werden Überbelastungen und Entladungen vermieden, was die Batterie länger nutzbar macht. Dies minimiert Kapazitätsverluste und sorgt für anhaltend stabile Leistung über die Zeit. Intelligent und automatisch ausgeführt, gewährleistet diese Funktion, dass deine Batteriebank stets in bestem Zustand ist, was die Gesamtleistung des Systems steigert und deine netzunabhängige Energielösung zuverlässig macht. Zeitgesteuertes Laden und Leistungskontrolle Der Growatt SPF 6000 ES Plus Wechselrichter bietet zeitgesteuertes Laden und eine präzise Leistungskontrolle, die deine Energieverwaltung noch effizienter machen. Mit der zeitgesteuerten Ladefunktion kannst du festlegen, zu welchen Zeiten der Inverter die Batterien bevorzugt auflädt. Dies ermöglicht es dir, die Solarenergie in den Stunden mit höchster Sonneneinstrahlung optimal zu nutzen und so die Batteriekapazität für den späteren Verbrauch zu erhöhen. Die Leistungskontrolle des SPF 6000 ES Plus erlaubt dir eine genaue Überwachung und Anpassung der Energieproduktion und -verwendung. Du kannst die Ausgangsleistung des Inverters je nach Bedarf feinabstimmen und somit sicherstellen, dass deine Energieversorgung den aktuellen Anforderungen entspricht. Diese Funktion ist besonders nützlich, um unerwartete Stromspitzen zu bewältigen oder die Inbetriebnahme von energieintensiven Geräten zu steuern, während sie gleichzeitig die Stabilität und Zuverlässigkeit deines Energieversorgungssystems gewährleisten. Growatt Überwachungsplattform  Durch den Einsatz des optionalen Zubehörs der Shine-Serie kannst du die Growatt Monitoring-Plattform nutzen. Diese Plattform steht dir sowohl als Smartphone-App für iOS und Android als auch in einer Webversion zur Verfügung. Das Shine-Zubehör muss separat erworben werden, aber die Nutzung der Plattform ist kostenfrei. Über Shine kannst du alle deine Growatt-Produkte konfigurieren und überwachen, und es ermöglicht dir auch die Anzeige des Eigenverbrauchs sowie das Verfolgen von Trends. Zur SPF-Serie sind folgende Shine-Optionen kompatibel: ShineWiFi-FShineGPRS-F Technische Daten Inverter Output Nennleistung: 6000VA / 6000WBatteriespannung: 48 VDCParallelschaltbarkeit: max. 6 EinheitenAC-Spannungsregelung (Batteriebetrieb): 230VAC +/- 5% @ 50/60HzSpitzenleistung: 12000 VA Solarladegerät Max. PV-Leistung: 8000WMPPT-Bereich der Betriebsspannung: 120VDC ~ 450VDCMax. PV-Anlagen-Leerlaufspannung: 500 VDCMax. Solar-Ladestrom: 100A AC-Ladegerät AC Lader Ladestrom: 80AAC-Eingangsspannung: 230VACWählbarer Spannungsbereich: 170-280 VAC; 90-280 VACFrequenzbereich: 50/60Hz (Automatische Erkennung)Betriebstemperaturbereich: 0°C - 55°C Physisch Schutzklasse: IP20Abmessungen: 460 x 395 x 132 mmGewicht: 13,5 kg Lieferumfang 1x Growatt SPF 6000 ES Plus Off-Grid Speicher-Wechselrichter

The Growatt SPH4600TL BL-UP hybrid inverter supports solar modules with an output of up to 8200W. It offers a scalable system configuration and a UPS function with a switchover time of 10ms. In addition, the single-phase inverter enables intelligent load management via a potential-free contact. With these functions, the inverter offers a flexible and reliable solution for solar projects. About the SPH4600TL BL-UP inverter Two MPP trackers (Maximum Power Point)UPS function, 10ms switching timeIntelligent load management via potential-free contactScalable system configurationVPP interface readyIntelligent remote monitoring and maintenanceSupports lithium and lead-acid batteriesDC/AC ratio up to 1.5LCD+LED displayComplies with CE, VDE0126-1-1, etc. Hybrid inverter Compared to conventional inverters, hybrid inverters offer the option of not only feeding the generated solar power into the grid, but also storing it in batteries. This means that the stored solar power can be used even when the sun is not shining. Another function of hybrid inverters is to optimize a household's electricity consumption by primarily using the solar power generated directly in the household before it is fed into the grid. This leads to a reduction in energy costs and less dependence on expensive grid electricity. Operating modes - configurable according to system requirements Online mode Different operating modes can be set for optimum system integration of the SPH inverter. When entered directly on the device, a priority mode can only be set for one period. When using the online platform, up to three time periods can be set for the priority mode (a chargeable accessory is required to use this function). Load first:With the standard "Load first" mode, the connected loads (consumers) are supplied with energy first. As soon as the PV energy is sufficient for the load, the surplus energy is fed into the battery. If the battery is fully charged or none is connected, the remaining energy is fed into the grid.Battery first:In this mode, the inverter first fully charges the battery with the maximum possible solar power. If the PV power is not sufficient, the grid charging function can also be activated.Grid first:In this mode, the PV energy generated is fed into the grid first. The on and off time of the mode can be set here, as well as the power rate. Backup mode: If there is no longer any grid voltage at the device, e.g. due to a short-term power failure or blackout, the Growatt SPH automatically switches to backup mode. This ensures that the AC output is supplied via the EPS-LOAD connection. The required energy is only supplied via the solar system and the battery. If the PV system also fails, the battery secures the AC supply until it is discharged. If required, the automatic switch to this mode can also be deactivated. Maximum Power Point Tracking By using Maximum Power Point Tracking (MPPT) technology, the optimum yield is achieved in a solar system. The MIC inverter has an MPPT that sets the ideal ratio between voltage and current during the course of the day according to the solar radiation and the module temperature of the solar modules. Thanks to the wide MPPT voltage range, many solar modules can be connected, which enables efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Intelligent load management The inverter's integrated intelligent load management enables efficient and precise control of energy consumption. Electrical loads can be intelligently controlled and prioritized via the potential-free contact. This function makes it possible to automatically detect the energy demand and make optimum use of the available energy. Intelligent load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your solar system. Growatt monitoring platform The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) as well as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. You can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends.The following Shine options are compatible with the SPH series: ShineWiFi-XShineLink-XShine4G-XShineMaster Technical data Recommended module power: up to 8200 WMax. DC voltage: 550 VStarting voltage: 120 VMPPT voltage range: 120-550 V/360 VBattery voltage range: 42~59 VMax. Charge/discharge current: 85 AContinuous charge/discharge power: 4000 WAC rated power: 4600 WMax. Apparent power: 4600 VAMax. AC output power: 4000 WMax. Output current: 17.4 AAC nominal voltage range: 230V (180Vac-270Vac)AC mains frequency range: 50/60 Hz (45Hz-55Hz/55Hz-65Hz)Housing classification: IP65Manufacturer's warranty: 10 yearsMaximum efficiency of 97.4%Dimensions: 420 x 560 x 180mmWeight: 31 kg Scope of delivery 1x Growatt SPH4600TL BL-UP inverter

The Growatt MIC 3000TL-X inverter is a lightweight and compact on-grid inverter, also known as a micro inverter, with which you can feed your solar energy into the home grid. It is ideal for use with a small solar system, for example on balconies, garden sheds, garages or areas with shading. The inverter has 1 MPPT tracker with a maximum input current of 13A. High safety is an important aspect and is achieved through several features such as a built-in DC switch, overvoltage protection and reverse polarity protection. The inverter uses natural convection cooling, which means that there is no mechanically noisy cooling system. It also has fewer moving parts, less maintenance and a lower risk of malfunction. At just 6.2 kg, it is one of the smallest inverters on the market. This makes the Growatt MIC 3000TL-X inverter easy and quick to set up by an installer, saving time and money. Specifications: Efficiency up to 97.4Mpp voltage range: 65-550VMax. Output power: 3000WMax. Output current: 14.3AMax. PV input power: 4200WMaximum input current: 13ASelf-consumption at night: <0.5WMpp tracker / strings: 1Number of phases: 1DC connection: MC4Very quiet thanks to convection coolingBuilt-in DC switch for solar cellsApprovals: VDE 0126-1-1, VDE-AR-N 4105:2018 and others.IP65Dimensions (L x W x H) - 274 x 254 x 138 [mm]Weight: 6.2 kg Installation of the inverter We always recommend that you contact an authorized electrician when connecting your inverter to ensure a safe and legal installation. Warranty: 10 year Growatt warranty (see warranty document in downloads) Installation We always recommend that you consult an authorized electrician when connecting your battery to ensure a safe and legal installation. Scope of delivery: 1x Growatt MIC 3000TL-X inverter

The Growatt ATS-S is a single-phase transfer switch and controls the changeover of the switching device both when connected to the power grid and in stand-alone operation in order to provide power to the EPS load. It is used with Growatt inverters from the SPH and SPA series. The ATS-S can automatically switch to stand-alone operation in the event of a power failure and thus supply everything else with power to guarantee smooth operation. Its natural cooling concept is used to prevent overheating. Technical data Voltage: 230 VFrequency: 50/60 HzMax. Current: 30 AProtection class: IP65Operating temperature: -25°C - +50°CWeight: 2.38 kgDimensions: 250 x 200 x 86 mm Scope of delivery: 1x Growatt ATS-S 1-phase transfer switch

The Growatt MIC 1000TL-X inverter is a lightweight and compact on-grid inverter, also known as a micro inverter, with which you can feed your solar energy into the home grid. It is ideal for use with a small solar system, for example on balconies, garden sheds, garages or areas with shading. The inverter is suitable both for new systems and for retrofitting and can be combined with all types of solar module. The inverter has 1 MPPT tracker with a maximum input current of 13A. High safety is an important aspect and is achieved through several features such as built-in DC switch, overvoltage protection and reverse polarity protection. The inverter uses natural convection cooling, which means that there is no mechanically noisy cooling system. It also has fewer moving parts, less maintenance and a lower risk of malfunction. At only 6 kg. It is one of the smallest inverters on the market. This makes the Growatt MIC 1000TL-X inverter easy and quick to set up by an installer, saving time and money. Specifications: Efficiency up to 97.4Mpp voltage range: 50-500VMax. Output power: 1000WMax. Output current: 4.8AMax. PV input power: 1400WMaximum input current: 13ASelf-consumption at night: <0.5WMpp tracker / strings: 1Number of phases: 1DC connection: MC4Very quiet thanks to convection coolingBuilt-in DC switch for solar cellsApprovals: VDE 0126-1-1, VDE-AR-N 4105:2018 and others.IP65Dimensions (L x W x H) - 274 x 254 x 138 [mm]Weight: 6kg Installation of the inverter We always recommend that you contact an authorized electrician when connecting your inverter to ensure a safe and legal installation. Warranty: 10 year Growatt warranty (see warranty document in downloads) Installation We always recommend that you consult an authorized electrician when connecting your battery to ensure a safe and legal installation. Scope of delivery: 1x Growatt MIC 1000TL-X inverter

This Growatt cable set is for connecting SPH inverters and 2x GBLI batteries if you want to connect two such batteries in parallel. These are power cables and communication cables for easy plug-and-play installation of the Growatt GBLI6532 lithium battery and the Growatt SPH 3000 and 3600 inverter. This Growatt cable set is mandatory when connecting two GBLI batteries to the inverter. The length of this Growatt cable set is 2 meters and the set contains 2 x power cables (+/-) and 2 communication cables in the colors black and orange. Do you have any questions regarding the purchase of the Growatt cable set? Then simply contact us by e-mail or give us a call.

With the Growatt MIC 750TL-X string inverter (MPN: MIC 750TL-X), we offer a single-phase inverter that combines high yields with user-friendliness. It is particularly suitable for small PV systems and delivers up to 750W AC output power. Simply connect it to your solar system via the MC4 connection and you're ready to go. This allows you to cover part of your electricity requirements cost-effectively. The device can also be monitored and configured on the move using the Shine app or web application via an optional WLAN module. The Growatt MIC inverter at a glance Single-phase operationMaximum power point trackingConnect directly to photovoltaic modulesTouch button and OLED displayCompact design and easy installation10-year manufacturer's warrantyOptionally possible: monitoring with the Shine platform (chargeable accessory required) Why a string inverter? The output of solar modules varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur as soon as the output of a panel in a row is lower, resulting in lower electricity production for the entire row. A string inverter can reduce these losses. Maximum Power Point Tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a solar system. The MPPT of the MIC inverter sets the optimum ratio between voltage and current over the course of the day, depending on the solar radiation and the temperature of the solar modules. The wide MPPT voltage range means that a large number of solar modules can be connected and this enables efficient energy yield, the advantage of which is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and low weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connections, the connection from the solar supply to the inverter is also completed in just a few moments. The numerous protective functions ensure safe and smooth operation of the solar system. Protective devices DC reverse polarity protectionDC disconnectorDC / AC surge arrester: type IIIInsulation resistance detectionEarth fault, mains and residual current monitoringAC short-circuit protectionIsolated network detectionAFCI protection Technical data max. PV power: 1050Wmax. input voltage: 500VStart voltage: 50VNominal DC voltage: 120VMPPT voltage range: 50V-500VNominal AC power: 750WNominal AC voltage: 230VMax. Efficiency: 97.4%Operating temperature range: -25°C - +60°CProtection class: IP65Weight: 6kgDimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt MIC 750TL-X inverter1x mounting bracket1x operating instructions

The Growatt inverters in the MID series are particularly suitable for larger PV systems without storage. They can be used for self-supply or as a full feed-in. The maximum output power of the inverter is 20,000W and the device is compatible with a photovoltaic system with a maximum size of 30kWp. The maximum efficiency of the inverter is 98.3%. The European efficiency of 97.5% takes into account the typical weather conditions in Europe. The Growatt MID 20KTL3-X is transformerless and therefore works particularly efficiently. The inverter contains 2 MPP trackers. This means that 2 independent strings can be connected. This is important if the PV system consists of differently arranged surfaces, for example with east-west orientation. A 3-phase smart meter is still required to operate the Growatt MID 20KTL3-X and is not included in the scope of delivery. High safety is an important aspect and is achieved through several features such as built-in DC switch, overvoltage protection, reverse polarity protection and many other protective mechanisms. Specifications: Efficiency up to 97.4Mpp voltage range: 160V - 1000VMax. Output power: 20 000 WMax. Output current: 31.9 AMax. Size of the PV system: 30 000 WMaximum input current: 27 A (per MPP tracker)Self-consumption at night: <1WMpp tracker: 2Number of phases: 3DC connection: H4/MC4(optional)Built-in DC switch for solar cellsIP66Dimensions (L x W x H) - 525 x 395 x 222 [mm]Weight: 23 kg Installation of the inverter We always recommend that you contact an authorized electrician when connecting your inverter to ensure a safe and legal installation. Warranty: 10 year Growatt warranty (see warranty conditions in downloads) Scope of delivery: 1x Growatt MID 20KTL3-X inverter