This motorhome solar set without battery MEDIUM is the perfect medium-sized solar set for a self-sufficient power supply in your motorhome, caravan or camper. Installation takes less than two hours - experienced hands are much quicker. A complete installation diagram is included and enables even complete beginners to master the installation quickly and successfully. The expected daily output (April to October) is an average of 1000 Wh/day (max. 1400 Wh on sunny days in Switzerland). The system is ideally suited for charging 12V LiFePO4, AGM, GEL or lead-acid batteries.

Motorhome solar set without battery MEDIUM: simple, proven, high quality

The set contains all the components you need to charge your batteries on the move.

Voltima is a Volitmax own brand and is valued by customers for its high quality and durability at an affordable price.

Components of the motorhome solar set without battery MEDIUM

All components of the set are listed and linked above.

You can click on the yellow text to open the products individually and get more detailed information about them.
If you want to change individual components of the set (for example, because the solar modules we have suggested do not fit on your roof), you can simply open all the products listed individually, add them to your shopping cart and then make the adjustments in your shopping cart.

You can also do this if you want to replace individual products that are currently out of stock with items that are in stock. (As soon as only one product of the set is out of stock, the whole set will be displayed as "coming soon", even if only one product is missing)

If you are unsure, you are welcome to contact us. The best way to do this is to send us an email to [email protected].

The components of the set:

VOLTIMA SCD25 MPPT solar charge controller Dual 12V 350Wp 50V 25A

With MPPT technology, the controller automatically determines the maximum power output (MPP) of the solar modules several times per second. It then transforms the excess voltage of the solar module into a higher charging current for the battery (realized by high-frequency switching controller technology with high efficiency). This additional charging current ensures shorter charging times and the best possible power utilization of the solar system. A Bluetooth dongle for monitoring the charging data via smartphone app or a permanently installable monitor can be purchased separately if required.

• Two battery charging outputs: For the main supply on-board battery as well as backup charging and charge retention of the starter battery
• Switchable charging characteristics for optimum charging of lead gel/dryfit, AGM/fleece or acid/wet batteries as well as LiFePO4 batteries
• Standard protection against overload, overcharging, overheating, reverse polarity and reverse battery discharge
• and much more
  

VOLTIMA Genio GSM130-36 solar module 130 watt monocrystalline

Bifacial modules are particularly suitable for mounting on the roofs of motorhomes or camper vans. The angle of incidence of the sun is often lateral in the camper and so the light can be ideally reflected from the roof onto the lower side of the panel. In this way, a good deal of extra power can be extracted from a small space.

Alternatively, you can also use a normal module such as the GSM130-36 (2x) or simply glue two flex panels such as the GSM160F-36 with mounting tape.

• The expected daily output (April to October) is on average approx. 500Wh/day per BSM130-36
• Dimensions of the BSM130-36: 1160 x 540 x 30 mm. (For two next to each other you need at least 1160 x 1080 x 30 mm + mounting rails space on the roof)

VOLTIMA 7-piece short complete mounting set for solar installation (white)

Spoiler profiles are the first choice, especially for caravans and motorhomes, when it comes to clean and long-term mounting of solar modules. If the modules are mounted in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). The complete mounting set also includes a cable bushing. Correctly fitted, they are absolutely leak-proof and extremely durable and you can even easily remove the module to access the surfaces underneath.

Sikaflex 554 (Sika 252i replacement) 300 ml construction adhesive (white)

A properly executed bond is superior to any screw connection in tough motorhome or boat applications. A strength of over 4 N/mm2 can be achieved on painted or GRP surfaces, a value that would never be achievable with a screw connection in the thin aluminum or GRP carrier layer - and without any holes in the roof. This adhesive set enables even a layman to create an absolutely firm connection between spoilers and the respective substrate. If the Sikaflex is not in stock, you can use the L&L Polymer if necessary.

If you connect the system to a battery with round terminals, you will also need terminal clamps (not included in the set)

Under "Accessories" we have listed many other useful products that you can use to optimize, supplement or adapt your solar system to your specific needs.

Before ordering:

Climb onto the roof of your camper / caravan / motorhome and measure exactly whether you have enough space on the roof. Remember that you need space for the solar panel AND the spoilers.

Also take into account any objects that may already be on the roof (skylights, fans, antennas, satellite dish, etc.).

Also plan exactly where your cable feed-through is to be placed, where your charge controller is to be installed in the vehicle and where the supply battery will be and how long the extension cable from the solar cells to the charge controller or from the charge controller to the supply battery needs to be. If the 5 meters of solar cable and 1 meter of charge controller cable provided in the set are not long enough, you will have to adjust the set manually.

Installation:

Use the installation instructions in the download section and the connection diagram in the pictures

AIS Batterien GmbH accepts no liability whatsoever for application errors, changes or damage to the vehicle caused by installation or necessary modifications, not even if the product has to be dismantled again due to a material defect; in such cases, replacement can only be provided for the product itself.