This motorhome solar set without battery - LARGE, is the perfect large solar set for a self-sufficient power supply in your motorhome, caravan or camper. Installation takes less than two hours - experienced hands are much quicker. A complete installation diagram is included and enables even complete beginners to master the installation quickly and successfully. The expected daily output (April to October) is an average of 1800 Wh/day (max. 2400 Wh on sunny days in Switzerland). The system is ideally suited for charging 12V LiFePO4, AGM, GEL or lead-acid batteries.

Motorhome solar set without battery LARGE: simple, proven, high quality

The set contains all the components you need to charge your batteries on the move.

Voltima is a Volitmax own brand and is appreciated by customers for its high quality and durability at an affordable price.

Components of the motorhome solar set without battery LARGE

All components of the set are listed and linked above.

You can click on the yellow text to open the products individually and get more detailed information about them.
If you want to change individual components of the set (for example, because the solar modules we suggest do not fit on your roof), you can simply open all the products listed individually, add them to your shopping cart and then make the adjustments in your shopping cart.

You can also do this if you want to replace individual products that are currently out of stock with items that are in stock. (As soon as only one product of the set is out of stock, the whole set will be displayed as "back soon")

If you are unsure, you are welcome to contact us. The best way to do this is to send us an email to [email protected].

The components of the set:

VOLTIMA SCN40 MPPT solar charge controller 12V/24V 480Wp/960Wp 50V 40A

With MPPT technology, the controller automatically determines the maximum power output (MPP) of the solar modules several times per second. It then transforms the excess voltage of the solar module into a higher charging current for the battery (realized by high-frequency switching controller technology with high efficiency). This additional charging current ensures shorter charging times and the best possible power utilization of the solar system. A Bluetooth dongle for monitoring the charging data via smartphone app or a permanently installable monitor can be purchased separately if required.

• Load output: the charge controller has a direct load output to connect loads that should not run off a battery.
• Switchable charging characteristics for optimum charging of lead-gel/dryfit, AGM/fleece or acid/wet batteries as well as LiFePO4 batteries
• Standard protection against overload, overcharging, overheating, reverse polarity and reverse battery discharge
• and much more
  

VOLTIMA Genio GSM190-36 solar module 190 watt monocrystalline

Genio modules are particularly suitable for installation on the roofs of motorhomes or camper vans. The angle of incidence of the sun is often lateral in the camper and so the light can be ideally reflected from the roof onto the lower side of the panel. In this way, a good deal of extra power can be extracted from a small space.

Alternatively, you can also use two normal modules such as the GSM180-36, or if you don't have enough space on the roof with mounting spoilers, simply glue two flex panels such as the GSM180F-40 with mounting tape (you only need 1390 x 1340 mm space for this)

• The expected daily output (April to October) is on average approx. 800Wh/day per BSM200-36
• Dimensions of the BSM200-36: 1100 x 900 x 30 mm. (For two next to each other you need at least 1800mm + mounting rails space on the roof)

VOLTIMA 7-piece long complete mounting set for solar installation (white)

Spoiler profiles are the first choice, especially for caravans and motorhomes, when it comes to clean and long-term mounting of solar modules. If the modules are mounted in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). The complete mounting set also includes a cable bushing. When fitted correctly, they are absolutely leak-proof and extremely durable.

Sikaflex 554 (Sika 252i replacement) 300 ml construction adhesive (white)

Correctly applied bonding is superior to any screw connection in tough motorhome or boat applications. A strength of over 4 N/mm2 can be achieved on painted or GRP surfaces, a value that would never be achievable with a screw connection in the thin aluminum or GRP carrier layer - and without any holes in the roof. This adhesive set enables even a layman to create an absolutely firm connection between spoilers and the respective substrate. If the Sikaflex is not in stock, you can switch to the L&L Polymer if necessary.

If you connect the system to a battery with round terminals, you will also need terminal clamps ( not included in the set)

Under "Accessories" we have listed many other useful products that you can use to optimize, supplement or adapt your solar system to your specific needs.

Before ordering:

Climb onto the roof of your camper / caravan / motorhome and measure exactly whether you have enough space on the roof. Remember that you need space for the solar panel AND the spoilers.

Also take into account any objects that may already be on the roof (skylights, fans, antennas, satellite dish, etc.).

Also plan exactly where your cable feed-through is to be placed, where your charge controller is to be installed in the vehicle and where the supply battery will be and how long the extension cable from the solar cells to the charge controller or from the charge controller to the supply battery needs to be. If the 5 meters of solar cable and 1 meter of charge controller cable provided in the set are not long enough, you will have to adjust the set manually.

Installation:

Use the installation instructions in the download section of the products, as well as the connection diagram in the pictures.

AIS Batterien GmbH accepts no liability whatsoever for application errors, changes or damage to the vehicle that have become necessary as a result of installation, nor if the product has to be dismantled again as a result of a material defect; in such cases, replacement can only be provided for the product itself.