This motorhome CHARGE set with LiFePO4 battery - LARGE, makes it possible to charge your supply battery via solar power while standing still or via a charging booster while driving. This makes it clearly superior to a purely solar setup in terms of power supply in a motorhome or camper. If the sun doesn't shine for one or more days, or if you want or need to park in the shade, the battery can quickly run out with a purely solar setup. The up to 60Ah or 800 Wh charge per hour of driving that this set brings with it is a real blessing. You usually arrive at your pitch with a completely full battery and are much less dependent on sunshine.

A complete connection diagram is included with the NBS60. This means that installation is also feasible for beginners. The expected daily output of the solar modules (April to October) is 1600 Wh/day on average (max. 2000 Wh on sunny days in Switzerland). With 200Ah, the A200U delivers a total of 2560 Wh. This is enough battery capacity to charge an I Phone 250 times, charge a laptop 50 times or light up 8 LED spotlights for 480 hours. With this battery you could also operate a normal compressor refrigerator for at least 96 hours and run a 2000W inverter.

The motorhome CHARGE set without battery - LARGE: simple, proven, high-quality

The special thing about our sets for motorhomes and campers: We use an extra solid mounting system for the solar modules that can simply be stuck on. The module can be unscrewed from the spoiler at any time if you need to access the area under the solar module.

We have also paid particular attention to quality at the critical point, the cable feed-through into the interior of the motorhome. The supplied cable gland is made from the same sturdy material as the roof spoiler for the solar modules and is simply glued on. When fitted correctly, the connection is absolutely watertight and particularly durable.

Noqon, Acconic and Voltima are Volitmax's own brands and are particularly appreciated by customers for their high quality and durability at an affordable price.

Components of the motorhome CHARGE set without battery - LARGE:

All components of the set are listed and linked above.

You can click on the yellow text to open the products individually and call up more detailed information about them.
If you want to change individual components of the set (for example, because the solar modules we have suggested do not fit on your roof), you can simply open all the products listed individually, add them to your shopping cart and then make the adjustments in your shopping cart.

You can also do this if you want to replace individual products that are currently out of stock with items that are in stock. (As soon as only one product of the set is out of stock, the whole set will be displayed as "back soon" or "currently unavailable", even if most of the products are probably in stock)

If you are unsure, you are welcome to contact us. The best way to do this is to send us an email to [email protected].

The components of the set:

Acconic A200 LiFePO4 12V lithium supply battery 200Ah

Lithium batteries offer several advantages over conventional lead or AGM batteries. This makes them particularly interesting for use in motorhomes:

• Longevity: LiFePO4 batteries last over 3000 cycles at 80% DOD and even over 5000 cycles at 50% DOD. This means you probably won't have to change the battery for decades, which is cheaper in the long term than lead or AGM, despite slightly higher purchase costs
• Space-saving: Motorhomes are often dependent on limited space. With lithium batteries, you can save valuable storage space, as they are much more compact than lead-acid or AGM batteries.
• Lightness / low weight: If you need to stay under 3.5 tons, you can save a lot of weight with a lithium battery, as they are only about 30-40% of the weight of lead-acid or AGM while having twice the usable capacity. So with 15 kg of lithium, you can enjoy the usable capacity of 80 kg of lead-acid or AGM. This leaves more charging capacity for other loads.
• Absolutely safe, gas-free and heat-tolerant. The combination of lithium, iron and phosphate does not release any oxygen. The battery can therefore not burn or explode.
• Low self-discharge and an integrated battery management system (BMS) mean you don't have to worry about damaging your battery through deep discharge.

With 200Ah, the A200 delivers a total of 2560 Wh. This is enough battery capacity to charge an I Phone 240 times, charge a laptop 40 times or power 8 LED spotlights for 480 hours. You could operate a normal compressor refrigerator for 96 hours with this battery.
This makes it the ideal battery for larger campers. If you ever need 230V AC power, you can also easily connect a 2000W inverter here. Everything you need in a larger camper or motorhome (water pump, lights, charging cell phones and laptops, compressor refrigerator, kettle/coffee maker, blender, etc.) should be able to be supplied by this battery over several sun-free days (without any charging by solar). Only if you have really large consumers, such as a 230V induction hob, a water boiler or a fan heater, will this battery not be enough.

The A200 is also particularly space-saving and fits perfectly under the seat box of a Fiat Ducato driver or passenger seat, for example. Alternatively, we also have the A200 and the A200S in our range.

If 200Ah or 2650 Wh is not enough battery capacity for you, you can connect another A200 in parallel.

NOQON NBS60 solar charge booster with integrated 60A solar charge controller

The NOQON NBS models combine an MPPT solar charge controller and charge booster in one device.

When the vehicle is stationary, a 12V battery can be charged via the solar module with up to 30Ah or approx. 400 Wh charging power. When driving, the NBS60 even has a charging capacity of 60Ah or approx. 800Wh.
For optimum battery charging, the NOQON NBS automatically adjusts the charging characteristic to the required values via the voltage measurement cables. In doing so, it compensates for line losses and voltage fluctuations of the alternator that occur while driving.

• Switchable charging characteristics for optimum charging of lead-gel/dryfit, AGM/fleece or acid/wet batteries as well as LiFePO4 batteries
• Standard protection mechanisms: Overvoltage and undervoltage protection for the main battery, undervoltage protection for the starter battery, overload protection for B2B charging, overheating protection, reverse protection, PV overload protection, PV overvoltage protection
• and much more
• Thin cables (2.5mm2) to tap the "D+" or a "terminal 15" / "ignition on" signal of your vehicle are not included in the set.

VOLTIMA Genio GSM190-36 solar module 190 Watt monocrystalline

Genio modules are particularly suitable for mounting on the roofs of motorhomes or campervans. The angle of incidence of the sun is often lateral in the camper and so the light can be ideally reflected from the roof onto the lower side of the panel. In this way, a good deal of extra power can be extracted from a small space.

Alternatively, you can also use two normal modules such as the GSM180-36, or, if you don't have enough space on the roof with mounting spoilers, simply glue two flex panels such as the GSM180F-40 with mounting tape (you only need 1390 x 1340 mm space for this)

The expected daily output (April to October) is on average approx. 800Wh/day per BSM200-36
Dimensions of the BSM200-36: 1100 x 900 x 30 mm. (For two next to each other you need at least 1800mm + mounting rails space on the roof)

VOLTIMA 7-piece long complete mounting set for solar installation (white)

Spoiler profiles are the first choice, especially for caravans and motorhomes, when it comes to clean and long-term mounting of solar modules. If the modules are mounted in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). The complete mounting set also includes a cable bushing. When fitted correctly, they are absolutely leak-proof and extremely durable.

Sikaflex 554 (Sika 252i replacement) 300 ml construction adhesive (white)

Correctly applied bonding is superior to any screw connection in tough motorhome or boat applications. A strength of over 4 N/mm2 can be achieved on painted or GRP surfaces, a value that would never be achievable with a screw connection in the thin aluminum or GRP carrier layer - and without any holes in the roof. This adhesive set enables even a layman to create an absolutely firm connection between spoilers and the respective substrate.

Under "Accessories", we have listed many other useful products that you can use to optimize, supplement or adapt your solar system to your specific needs.

Before ordering:

Climb onto the roof of your camper / caravan / motorhome and carefully measure whether you have enough space on the roof. Remember that you need space for the solar panel AND the spoilers.

Also take into account any objects that may already be on the roof (skylights, fans, antennas, satellite dish, etc.).

Also plan exactly where your cable feed-through is to be placed, where your charge controller is to be installed in the vehicle and where the supply battery will be and how long the extension cable from the solar cells to the charge controller or from the charge controller to the supply battery needs to be. If the 5 meters of solar cable and 1 meter of charge controller cable provided in the set are not long enough, you will have to adjust the set manually.

Installation:

Use the installation instructions for the individual products and the connection diagram in the pictures.

AIS Batterien GmbH accepts no liability whatsoever for application errors, changes or damage to the vehicle caused by installation or necessary modifications, not even if the product has to be dismantled again due to a material defect; in such cases, replacement can only be provided for the product itself.