The Votronic 5545 tank electrode 15-50 K is a universally applicable tank sensor for measuring the tank level. The tank electrode 15-50 K is suitable for fallow water and sewage tanks as well as for drinking water tanks. Thanks to the use of appropriate materials, these tank sensors also comply with the DIN 2001-2 drinking water regulations and are designed for tanks with a height of between 15 and 50 cm.Another special feature is that the tank electrodes can be mounted on the top of the tank from the inside as well as from the outside. For fresh water tanks, they can even be mounted on the underside of the tank.Key product features of the 15-50 K tank electrode Rod electrode, easy to shorten to tank height For tanks with a height between 15 and 50 cm Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 m Connection cable 75 cm long Simple adjustment to the specified tank height Test mark: E-test (EMC/vehicle directive) Complies with DIN standard 2001-2 from the Drinking Water Ordinance Linear, infinitely variable fill level signal Suitable for 12V and 24V continuous operation Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic gauges: Fresh water tank gauge S, 5311 Waste water indicator S, 5313 Holding tank indicator S, 5315 Info Panel Pro, 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery:1x Votronic 5545 15-50 K tank sensor1x mounting material consisting of sealing ring, union nut PG 29, connection cable 75 cm1x operating instructions

The Votronic 5543 tank electrode 12-24 K is a universally applicable tank sensor for measuring the tank level. The tank electrode 12-24 K is suitable for service water and waste water tanks as well as for fresh water tanks. Thanks to the use of appropriate materials, these tank sensors also comply with the DIN 2001-2 drinking water regulations and are designed for tanks with a height of between 12 and 24 cm.Another special feature is that the tank electrodes can be mounted on the top of the tank from the inside as well as from the outside. In the case of fresh water tanks, they can even be installed on the underside of the tank. .Key product features of the 12-24 K tank electrode Rod electrode, easy to shorten to tank height For tanks with a height between 12 and 24 cm Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 m Connection cable 75 cm long Simple adjustment to the specified tank height Linear, stepless signal of the fill level Test mark: E-test (EMC/vehicle directive) Suitable for 12V and 24V continuous operation Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic gauges: Fresh water tank gauge S, 5311 Waste water indicator S, 5313 Holding tank indicator S, 5315 Info Panel Pro, 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery:1x Votronic 5543 12-24 K tank sensor1x mounting material consisting of sealing ring, union nut PG 29, connection cable 75 cm1x operating instructions

The fresh water tank gauge S from Votronic (MPN 5311) was designed for precise level measurement and can be used for all tank materials and tank sizes. The tank level is visualized via a 3-colour scalar, which is displayed on 10 LEDs, each representing 10% of the tank content. The display works continuously, as intermediate levels are displayed with variable brightness and therefore trends can be recognized immediately.The fresh water tank display S is designed as a panel version to match the VOTRONIC modular system and fits in perfectly with other VOTRONIC display units (uniform height 85 mm). Of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of just 18 mm allow installation in almost any location. The indicator is protected against reverse polarity and overload and is easy to connect via screw terminals on the back of the device.Key product features of the fresh water tank indicator S, 5311 Suitable for 12V and 24V DC operating voltage Low current consumption: only 1 - 30 mA Test mark: E-test, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimensions: 29 x 63 x 18 mm Can be switched on and off at the touch of a button High display resolution of the tank level thanks to 10-stage display Suitable for the Votronic module system Can also be operated with 2 tank sensorsThe display units can also be assigned to 2 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for switching, e.g. switch panel 16 A S art. no. 1289 or switch panel 2x16 A S art. no. 1291Compatible with many Votronic tank sensors Tank electrode 12-24 K, 5543 Tank electrode 15-50 K, 5545 Tank electrode 20 K-WC, 5555 Tank sensor FL, 5530 Tank sensor 30-110 K-FL, 5551 Scope of delivery:1x Votronic 5311 fresh water tank display S1x set of fixing screws1x drilling template1x Operating instructions

The level gauge / tank electrode FL from Votronic (MPN 5530) is based on a flexible cable probe and can be easily shortened to the appropriate tank height. The tank sensor is ideally suited for both fresh water tanks and waste water tanks. Thanks to the use of appropriate materials, these tank sensors also comply with the DIN 2001-2 drinking water regulations. The tank sensor is designed for high tanks with a height of between 30 and 110 cm.Another special feature of the Votronic FL tank electrode is that it can be mounted both on the inside and outside of the tank. The top and side walls of the tank can be used for mounting the Tank Sensor FL.Key product features of the Tank Sensor FL 5530 Permissible operating voltage: 12V and 24V DC (suitable for continuous operation) for mounting on the top or side wall of the tank suitable for fresh and waste water tanks suitable for tank heights from 30 to 100 cm Linear, stepless signal of the fill level Test mark: E-test (EMC/vehicle directive) Complies with DIN standard 2001-2 from the Drinking Water Ordinance Flexible cable probe, easy to shorten to tank height Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 mm Connection cable 75 cm long for plastic tanks: wall thickness max. 8 mm Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic gauges: . Fresh water tank gauge S, 5311 Waste water indicator S, 5313 Holding tank indicator S, 5315 Info Panel Pro 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery:1x Votronic 5530 FL tank sensor1x Flexible cable probe, sealing ring and PG 29 union nut1x Operating instructions

The Votronic waste water tank gauge S (MPN 5313) was designed for precise level measurement and can be used for all tank materials and tank sizes. The tank level is visualized via a 3-colour scale, which is displayed on 10 LEDs, each representing 10% of the tank content. The display works continuously, as intermediate levels are displayed with variable brightness and therefore trends can be recognized immediately.The waste water tank display Tank display S is designed as a panel version to match the VOTRONIC modular system and fits in perfectly with other VOTRONIC display units (uniform height 85 mm). Of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of just 18 mm allow installation in almost any location. The indicator is protected against reverse polarity and overload and is easy to connect via screw terminals on the back of the device.Key product features of the waste water tank indicator S, 5313 Suitable for 12V and 24V DC operating voltage Low current consumption: only 1 - 30 mA Test mark: E-test, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimensions: 29 x 63 x 18 mm Can be switched on and off at the touch of a button High display resolution of the tank level thanks to 10-stage display Suitable for the Votronic module system Can also be operated with 2 tank sensors The display units can also be assigned to 2 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for switching, e.g. switch panel 16 A S art. no. 1289 or switch panel 2x16 A S art. no. 1291Compatible with many Votronic tank sensors Tank electrode 12-24 K, 5543 Tank electrode 15-50 K, 5545 Tank electrode 20 K-WC, 5555 Tank sensor FL, 5530 Tank sensor 30-110 K-FL, 5551 Scope of delivery:1x Votronic 5313 waste water tank display S1x set of fixing screws1x drilling template1x operating instructions

The Votronic 5551 tank electrode 30-110 K-FL is a universally applicable tank sensor for measuring the tank level of drinking or fresh water tanks. The tank electrode 30-110 K-FL is suitable for both waste water tanks and fresh water tanks. Thanks to the use of appropriate materials, these tank sensors also comply with the DIN 2001-2 drinking water regulations. The tank sensor is designed for high tanks with a height of between 30 and 110 cm.Another special feature is that the tank electrodes can be mounted on the top of the tank from the inside as well as from the outside. In the case of fresh water tanks, they can even be mounted on the underside of the tank.Key product features of the 30-110 K-FL tank electrode Permissible operating voltage: 12V and 24V DC for installation on the top of the tank Suitable for drinking water and waste water tanks Flexible cable probe, easy to shorten to tank height Linear, stepless signal of the fill level Test mark: E-test (EMC/vehicle directive) Complies with DIN standard 2001-2 from the Drinking Water Ordinance Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 mm Connection cable 75 cm long For plastic tanks: wall thickness max. 8 mm Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic gauges: Fresh water tank gauge S, 5311 Waste water gauge S, 5313 Holding tank indicator S, 5315 Info Panel Pro 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery:1x Votronic 5551 30-110 K-FL tank sensor1x Flexible cable probe, sealing ring, union nut PG 291x operating instructions

The Votronic Info Panel Pro (MPN 5330) for 12V systems is a convenient display and control panel and has been specially developed for use in motorhomes. It takes over the most important control and switching tasks and offers direct monitoring of fresh water, waste water and waste tanks, as well as the on-board and starter battery. It is also equipped with a main battery switch and a main pump switch for the fresh water supply.On the left-hand side, several LEDs indicate the current battery voltage in a range from 10.5V to 15.0V. If the voltage is too low, this is signaled by red LEDs. At the touch of a button, you can switch between the voltage display of the on-board and starter battery or deactivate the display.There are two further displays on the Info Panel Pro for monitoring tanks, which are represented by light bars with 10 LEDs each. The displays work continuously, as intermediate levels are displayed with variable brightness and trends can therefore be recognized immediately. This gives you a complete overview of all filling and emptying processes. The display can be switched on and off at the touch of a button and switches off again automatically after approx. 10 minutes. The tank display on the right-hand side of the Info Panel Pro can also be switched to two measuring inputs (e.g. waste water and waste tank) as standard.The Info Panel Pro is equipped with integrated protection against reverse polarity and overload. The labeled connections for 6.3 mm flat plugs (power connections) and screw terminals (signal connections) are located on the rear.To make installation easier for you, you also receive a drilling template with the Info Panel Pro. Thanks to the low installation depth of just 15 mm, the device can be installed almost anywhere.Scope of delivery:1v Votronic Info Panel Pro 5330, operating instructions

The Votronic 5748 VPC Power Control Jupiter 200 is part of an innovative series of combination panels that have been specially developed for installation in motorhomes. It combines the functions of the Merkur 5744 and Terra 5741 models and also has a lot more to offer as it combines a solar computer, battery computer and water management in just one device. The 200 is the second most powerful version of the new Multi-Panel series from Votronic. It differs from the 100 and 400 versions only in the maximum battery current that can be measured by the Jupiter Panel and the supplied Smart Shunt + ground strap. In terms of functionality, the three devices are identical.The Jupiter series is currently the benchmark for measuring and display devices in the motorhome sector. No other panel offers such a wide range of functions, measurement and display options. Jupiter is also significantly cheaper than buying all the devices individually.Integrated solar computerThe solar computer of the Jupiter combi panel corresponds in performance and function to the Solar-Computer S. The solar display is compatible with most Votronic charge controllers and the Triple series. Among other things, it shows the current solar power in W, the current solar current in A, the charged solar capacity in Ah and the charged solar energy in kWh. The solar computer provides a comprehensive picture of the current performance of your motorhome solar system.Integrated battery computer incl. smart shunt and ground strapCorresponds in terms of performance to the single device Battery Computer 200 S, which is also available as a 100 and 400A version. The Votronic battery computer provides a comprehensive impression of the condition of your starter and board battery and offers numerous functions.Microprocessor-controlled, the following values are measured, calculated and displayed: Max. battery current: 200A On-board battery voltage 7 to 32 V (volts). Internal measurement resolution 0.1 V Allows conclusions to be drawn about the battery behavior under different loads and is used for function checks, e.g. of the charger, solar system, alternator, etc. Flashing warning display in the event of overvoltage Battery current (charge/discharge) +/- 0 to max. +/- 1800 A, internal measurement resolution 0.1 A Checking the discharge currents (load) by consumers, indicated by a "-" sign, control of charging currents, indicated by a "Charge" sign Battery capacity (Ah and %) Remaining charge from 0 Ah / 0% (empty) to nominal capacity max. 2000 Ah / 100% (full) Battery voltage 2nd battery (e.g. starter battery), 7 to 32 V (volts), internal measurement resolution 0.1 V Switching output freely programmable and tactile (PNP, plus potential 12V / 24V, max. 0.5A) incl. remaining run indicator Integrated level indicator for water tanksThe third important highlight of the Jupiter 200 is the level indicator for the fresh and waste water tanks. Together with the 16A switch for the fresh water pump, water management can also be implemented via the Jupiter combi panel.Other important features Voltage display for the starter battery Potential-free switching output for an external relay with freely programmable switching thresholds (% residual capacity) as deep discharge protection and as a main switch Indoor and outdoor thermometer incl. 1 indoor and 1 outdoor sensor Clock in 24-hour format Double USB charging socket (5 V/2.5 A) Simple, intuitive operation Important technical data Simple, intuitive operation Specially developed for use in motorhomes and camper vans Compact, simple installation low installation depth, low power consumption for 12 V or 24 V batteries Display dimensions: 200x65x30 mm Installation dimensions: 185x57x24 mm Weight without smart shunt: only 200g High-quality technology made in Germany Scope of delivery:1x Votronic 5748 VPC Jupiter 200 Multi-Panel1x operating instructions1x temperature sensor for indoor use1x temperature sensor for outside1x Smart measuring shunt for connecting the battery computer2x 5m connection cables (stereo cables)1x 35mm ground strap for measuring shunt connection

The Votronic waste tank indicator S (MPN 5315) was designed for precise level measurement and can be used for all tank materials and tank sizes. The tank level is visualized via a 3-colour scale, which is displayed on 10 LEDs, each representing 10% of the tank content. The display works continuously, as intermediate levels are displayed with variable brightness and therefore trends can be recognized immediately.The waste holding tank display Tank display S is designed as a panel version to match the VOTRONIC modular system and fits in perfectly with other VOTRONIC display units (uniform height 85 mm). Of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of just 18 mm allow installation in almost any location. The indicator is protected against reverse polarity and overload and is easy to connect via screw terminals on the back of the device.Key product features of the waste tank indicator S, 5315 Suitable for 12V and 24V DC operating voltage Low current consumption: only 1 - 30 mA Test mark: E-test, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimensions: 29 x 63 x 18 mm Can be switched on and off at the touch of a button High display resolution of the tank level thanks to 10-stage display Suitable for the Votronic module system Can also be operated with 2 tank sensorsThe display units can also be assigned to 2 tanks (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for switching, e.g. switch panel 16 A S art. no. 1289 or switch panel 2x16 A S art. no. 1291Compatible with many Votronic tank sensors Tank electrode 12-24 K, 5543 Tank electrode 15-50 K, 5545 Tank electrode 20 K-WC, 5555 Tank sensor FL, 5530 Tank sensor 30-110 K-FL, 5551 Scope of delivery:1x Votronic 5315 holding tank display S1x set of fixing screws1x drilling template1x operating instructions

The Votronic 5749 VPC Power Control Jupiter 100 is part of an innovative series of combination panels that have been specially developed for installation in motorhomes. It combines the functions of the Merkur 5744 and Terra 5741 models and also has a lot more to offer as it combines a solar computer, battery computer and water management in one device. The 400 is the largest version of the new Multi-Panel series from Votronic. It differs from the 200 and 100 versions only in the maximum battery current that can be measured with the Jupiter Panel.The Jupiter series is currently the benchmark for measuring and display devices in the motorhome sector. No other panel offers such a wide range of functions, measurement and display options. Jupiter is also significantly cheaper than buying all the devices included individually.Integrated solar computerThe solar computer of the Jupiter combi panel corresponds in performance and function to the Solar-Computer S. The solar display is compatible with most Votronic charge controllers and the Triple series. Among other things, it shows the current solar power in W, the current solar current in A, the charged solar capacity in Ah and the charged solar energy in kWh. The solar computer provides a comprehensive picture of the current performance of your motorhome solar system.Integrated battery computer incl. smart shunt and ground strapAlso corresponds in terms of performance to the single device Battery Computer 400 S (manufacturer number 1269), which is also available as a 200 and 100A version. The Votronic battery computer provides a comprehensive impression of the condition of your starter and board battery and offers numerous functions.Microprocessor-controlled, the following values are measured, calculated and displayed: max. battery current: 400A On-board battery voltage 7 to 32 V (volts). Internal measurement resolution 0.1 V Allows conclusions to be drawn about the battery behavior under different loads and is used for functional checks, e.g. of the charger, solar system, alternator, etc. Flashing warning display in the event of overvoltage Battery current (charge/discharge) +/- 0 to max. +/- 1800 A, internal measurement resolution 0.1 A Checking the discharge currents (load) by consumers, indicated by a "-" sign, control of charging currents, indicated by a "Charge" sign Battery capacity (Ah and %) Remaining charge from 0 Ah / 0% (empty) to nominal capacity max. 2000 Ah / 100% (full) Battery voltage 2nd battery (e.g. starter battery), 7 to 32 V (volts), internal measurement resolution 0.1 V Switching output freely programmable and tactile (PNP, plus potential 12V / 24V, max. 0.5A) incl. remaining run indicator Integrated level indicator for water tanksThe third important highlight of the Jupiter 100 is the level indicator for the fresh and waste water tanks. Together with the 16A switch for the fresh water pump, water management can also be implemented via the Jupiter combi panel.Other important features Voltage display for the starter battery Potential-free switching output for an external relay with freely programmable switching thresholds (% residual capacity) as deep discharge protection and main switch Indoor and outdoor thermometer incl. 1 indoor and 1 outdoor sensor Clock in 24-hour format Double USB charging socket (5 V/2.5 A) Simple, intuitive operation Important technical data Simple, intuitive operation Compact, simple installation low installation depth, low power consumption for 12 V or 24 V batteries Display dimensions: 200x65x30 mm Installation dimensions: 185x57x24 mm Weight without smart shunt: only 200g Scope of delivery:1x Votronic 5749 VPC Jupiter 400 Multi-Panel1x operating instructions1x temperature sensor for indoor use1x temperature sensor for outside1x Smart measuring shunt for connecting the battery computer2x 5m connection cables1x ground strap matched to the performance of the battery computer

The Votronic Power Control (VPC) Terra Multi-Panel (MPN 5741) is an innovative monitoring and control system that has been specially developed for use in motorhomes. The bright display provides you with the most important information about your system. At the same time, the panel offers a wide range of setting options. Compared to the combination panel 5744 (Merkur), Terra is aimed at users who also want to have the fill levels of the water tanks on the "screen". Compared to the Merkur model, Terra does not have USB charging sockets or a clock display.Highlights of the Terra VPC Kompi-Panel Voltage display for on-board and starter battery Voltage-controlled deep discharge protection for the on-board battery Switching output for an external relay as main switch Solar computer (for data see p. 55) for all VOTRONIC solar charge controllers (from 2014) and VBCS Triple Level indicator for fresh water and waste water tank Switch for the fresh water pump max. 16 A Voltage display in V for the on-board and starter battery with undervoltage protection for the on-board battery Main switch for the on-board supply via switching output 1A (e.g. via Switch Unit 40 or Switch Unit 100) Level indicator in % for fresh water and waste water tank Current solar power in W, current solar current in A Charged solar capacity in Ah, charged solar energy in kWh Compatible with all VOTRONIC solar controllers from 2014 onwards with integrated solar computerIn addition to the functions and level displays for the tanks, the VPC Terra Panel also has an integrated solar computer which offers the same range of functions as the Votronic Solar Computer S 1250, which is available separately. The solar display is compatible with the Votronic Triple series and, with the exception of the small SR controllers, with all Votronic solar charge controllers. High-quality technology, stable construction and modern design are the hallmarks of the Info Panel Pro series. Self-explanatory symbols allow intuitive operation and the large displayed values are easy to read in all lighting conditions, even from a distance. The currently selected function is also indicated by several LEDs.Important key technical data Battery voltage on board / start: 12 / 12 and 24 V Current consumption / with USB active: 0-50 mA / Switching current main switch max. 0.3 A Switching current pump max.: 16A Display dimensions (WxHxD): 200x55x18 mm Installation dimensions (WxHxD): 175x43x12 mm Weight: 175 grams Scope of delivery:1x Votronic 5741 VPC Terra combination panel + operating instructions

Votronic LCD control board Jupiter 100 with Smart Shunt 25mm² The VOTRONIC Power Control (VPC for short) is an innovative multi-panel system for motorhomes that combines the most important functions and information in one user-friendly device. The information is shown on a bright, white backlit graphic display. The large values displayed are easy to read in all lighting conditions, even from a distance. Colored LEDs indicate the selected function at all times. The individual versions differ in their range of functions, which are designed to meet the specific requirements of different vehicle types. While the Jupiter version, for example, leaves almost nothing to be desired in terms of energy supply and fill levels, the Merkur version is particularly recommended for more compact vehicles, which often do not have fixed tanks.All devices have at least one voltage display for the on-board and starter battery and a switching output for an external relay as a main switch. A deactivatable alarm (beeper) on the panel and a message on the display draw attention to the fact that the battery has fallen below an adjustable energy threshold and the main switch will automatically switch off in a few seconds to prevent the battery from discharging too deeply.

The Votronic tank electrode 20 K-WC (HAN 5555) is a tank sensor for cassette toilets in motorhomes, which are now considered the absolute standard. Cassette toilets are compact in design and have a display which, unfortunately, usually only marks the full state. Once this is reached, the toilet in the vehicle can no longer be used. The use of tank sensors in combination with Votronic fill level indicators allows you to plan the disposal and replacement of your mobile tanks in advance.The main product features of the 20 K-WC tank sensor Tank sensor specially designed for cassette toilets and mobile tanks Compact, robust, waterproof (IP67) Simple installation, no inspection opening required With 3-pin circular plug connection for disconnecting the tank Complete installation material included in the scope of delivery Rod electrode, easy to shorten to tank height Installation diameter 38 mm (or PG 29 thread) Flange diameter 46.5 mm Test mark: E-test (EMC/vehicle directive) Connection cable 75 cm long Mounting from above using mounting ring Detachable plug connection for tank emptying Optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic displays: . Waste water indicator S, 5313 Holding tank indicator S, 5315 Info Panel Pro, 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Solid measurement technology and simple installationThe tank electrode 20 K-WC has been further developed on the basis of the long-established tank electrode to provide a fully-fledged level indicator especially for use in cassette toilets. The compact design makes it possible to simply screw the tank sensor into the toilet cassette from above using the mounting ring supplied. The 38 mm diameter mounting hole required for this is easy to make using a hole saw. The fully encapsulated electronics are designed to be waterproof (IP67) and suitable for rough operation when flushing the toilet cassette.To change the cassette, the tank electrode 20 K-WC is disconnected from the vehicle via a solid 3-pin round plug and the plug is fixed to the cassette. In addition to the 3-pin round plug connection, the scope of delivery also includes a mounting ring and the complete mounting material.Scope of delivery:1x Votronic 5555 Tank electrode 20 K-WC

The Votronic 5748 VPC Power Control Jupiter 200 is part of an innovative series of combination panels that have been specially developed for installation in motorhomes. It combines the functions of the Merkur 5744 and Terra 5741 models and also has a lot more to offer as it combines a solar computer, battery computer and water management in just one device. The 200 is the second most powerful version of the new Multi-Panel series from Votronic. It differs from the 100 and 400 versions only in the maximum battery current that can be measured by the Jupiter Panel and the supplied Smart Shunt + ground strap. In terms of functionality, the three devices are identical.The Jupiter series is currently the benchmark for measuring and display devices in the motorhome sector. No other panel offers such a wide range of functions, measurement and display options. Jupiter is also significantly cheaper than buying all the devices individually.Integrated solar computerThe solar computer of the Jupiter combi panel corresponds in performance and function to the Solar-Computer S. The solar display is compatible with most Votronic charge controllers and the Triple series. Among other things, it shows the current solar power in W, the current solar current in A, the charged solar capacity in Ah and the charged solar energy in kWh. The solar computer provides a comprehensive picture of the current performance of your motorhome solar system.Integrated battery computer incl. smart shunt and ground strapCorresponds in terms of performance to the single device Battery Computer 200 S, which is also available as a 100 and 400A version. The Votronic battery computer provides a comprehensive impression of the condition of your starter and board battery and offers numerous functions.Microprocessor-controlled, the following values are measured, calculated and displayed: Max. battery current: 200A On-board battery voltage 7 to 32 V (volts). Internal measurement resolution 0.1 V Allows conclusions to be drawn about the battery behavior under different loads and is used for function checks, e.g. of the charger, solar system, alternator, etc. Flashing warning display in the event of overvoltage Battery current (charge/discharge) +/- 0 to max. +/- 1800 A, internal measurement resolution 0.1 A Checking the discharge currents (load) by consumers, indicated by a "-" sign, control of charging currents, indicated by a "Charge" sign Battery capacity (Ah and %) Remaining charge from 0 Ah / 0% (empty) to nominal capacity max. 2000 Ah / 100% (full) Battery voltage 2nd battery (e.g. starter battery), 7 to 32 V (volts), internal measurement resolution 0.1 V Switching output freely programmable and tactile (PNP, plus potential 12V / 24V, max. 0.5A) incl. remaining run indicator Integrated level indicator for water tanksThe third important highlight of the Jupiter 200 is the level indicator for the fresh and waste water tanks. Together with the 16A switch for the fresh water pump, water management can also be implemented via the Jupiter combi panel.Other important features Voltage display for the starter battery Potential-free switching output for an external relay with freely programmable switching thresholds (% residual capacity) as deep discharge protection and as a main switch Indoor and outdoor thermometer incl. 1 indoor and 1 outdoor sensor Clock in 24-hour format Double USB charging socket (5 V/2.5 A) Simple, intuitive operation Important technical data Simple, intuitive operation Specially developed for use in motorhomes and camper vans Compact, simple installation low installation depth, low power consumption for 12 V or 24 V batteries Display dimensions: 200x65x30 mm Installation dimensions: 185x57x24 mm Weight without smart shunt: only 200g High-quality technology made in Germany Scope of delivery:1x Votronic 5748 VPC Jupiter 200 Multi-Panel1x operating instructions1x temperature sensor for indoor use1x temperature sensor for outside1x Smart measuring shunt for connecting the battery computer2x 5m connection cables (stereo cables)1x 35mm ground strap for measuring shunt connection

The Votronic VPC Power Control Merkur (MPN 5744) is part of an innovative series of combi panels that have been specially developed for installation in motorhomes. Merkur functions as a control board and can, for example, take over important switching functions based on parameters such as temperature or battery voltage via the integrated switching output. Merkur's LCD display provides up-to-date data on the charging voltage of the board and service battery. Another highlight is the integrated solar computer, which is identical to the LCD Solar Computer S in terms of functionality and display. It is compatible with most Votronic solar charge controllers and the Triple series.The bright display provides you with the most important information about your system. And shows the time. The two built-in USB charging sockets, each with 2.5A output power at 5V, provide additional convenience. Merkur's range of services is rounded off with the temperature display for the vehicle interior and the outside temperature. The two required temperature sensors are already included in the scope of delivery.Highlights of the VPC Merkur at a glance Voltage display for on-board and starter battery Voltage-controlled deep discharge protection for the on-board battery Switching output for an external relay as main switch Integrated solar computer (see page 55 for data) for all VOTRONIC solar charge controllers (from 2014) and VBCS Triple displays: current solar power in W, current solar current in A, charged solar capacity in Ah, charged solar energy in kWh Voltage display in V of the on-board and starter battery with undervoltage protection for the on-board battery Main switch for the on-board supply via switching output 1A (e.g. via Switch Unit 40 or Switch Unit 100) Solid technology in a stylish design with high ease of useHigh-quality technology, stable construction and modern design are the hallmarks of the combi panels. Self-explanatory symbols allow intuitive operation, with the large values displayed being easy to read in all lighting conditions, even from a distance. The currently selected function is also indicated by several LEDs.Important key technical data Battery voltage on board / start: 12 / 12 and 24 V Current consumption / with USB active: 0-50 mA / Switching current main switch max. 0.3 A Switching current pump max.: 16A Display dimensions (WxHxD): 200x65x30 mm Installation dimensions (WxHxD): 185x57x24 mm Weight: 200 grams Scope of delivery:1x Votronic 5744 VPC Merkur Combi Panel +1x operating instructions1x temperature sensor for indoor use1x temperature sensor for outside