The Votronic Info Panel Pro (MPN 5330) for 12V systems is a convenient display and control panel and has been specially developed for use in motorhomes. It takes over the most important control and switching tasks and offers direct monitoring of fresh water, waste water and waste tanks, as well as the on-board and starter battery. It is also equipped with a main battery switch and a main pump switch for the fresh water supply.On the left-hand side, several LEDs indicate the current battery voltage in a range from 10.5V to 15.0V. If the voltage is too low, this is signaled by red LEDs. At the touch of a button, you can switch between the voltage display of the on-board and starter battery or deactivate the display.There are two further displays on the Info Panel Pro for monitoring tanks, which are represented by light bars with 10 LEDs each. The displays work continuously, as intermediate levels are displayed with variable brightness and trends can therefore be recognized immediately. This gives you a complete overview of all filling and emptying processes. The display can be switched on and off at the touch of a button and switches off again automatically after approx. 10 minutes. The tank display on the right-hand side of the Info Panel Pro can also be switched to two measuring inputs (e.g. waste water and waste tank) as standard.The Info Panel Pro is equipped with integrated protection against reverse polarity and overload. The labeled connections for 6.3 mm flat plugs (power connections) and screw terminals (signal connections) are located on the rear.To make installation easier for you, you also receive a drilling template with the Info Panel Pro. Thanks to the low installation depth of just 15 mm, the device can be installed almost anywhere.Scope of delivery:1v Votronic Info Panel Pro 5330, operating instructions

The Votronic 5748 VPC Power Control Jupiter 200 is part of an innovative series of combination panels that have been specially developed for installation in motorhomes. It combines the functions of the Merkur 5744 and Terra 5741 models and also has a lot more to offer as it combines a solar computer, battery computer and water management in just one device. The 200 is the second most powerful version of the new Multi-Panel series from Votronic. It differs from the 100 and 400 versions only in the maximum battery current that can be measured by the Jupiter Panel and the supplied Smart Shunt + ground strap. In terms of functionality, the three devices are identical.The Jupiter series is currently the benchmark for measuring and display devices in the motorhome sector. No other panel offers such a wide range of functions, measurement and display options. Jupiter is also significantly cheaper than buying all the devices individually.Integrated solar computerThe solar computer of the Jupiter combi panel corresponds in performance and function to the Solar-Computer S. The solar display is compatible with most Votronic charge controllers and the Triple series. Among other things, it shows the current solar power in W, the current solar current in A, the charged solar capacity in Ah and the charged solar energy in kWh. The solar computer provides a comprehensive picture of the current performance of your motorhome solar system.Integrated battery computer incl. smart shunt and ground strapCorresponds in terms of performance to the single device Battery Computer 200 S, which is also available as a 100 and 400A version. The Votronic battery computer provides a comprehensive impression of the condition of your starter and board battery and offers numerous functions.Microprocessor-controlled, the following values are measured, calculated and displayed: Max. battery current: 200A On-board battery voltage 7 to 32 V (volts). Internal measurement resolution 0.1 V Allows conclusions to be drawn about the battery behavior under different loads and is used for function checks, e.g. of the charger, solar system, alternator, etc. Flashing warning display in the event of overvoltage Battery current (charge/discharge) +/- 0 to max. +/- 1800 A, internal measurement resolution 0.1 A Checking the discharge currents (load) by consumers, indicated by a "-" sign, control of charging currents, indicated by a "Charge" sign Battery capacity (Ah and %) Remaining charge from 0 Ah / 0% (empty) to nominal capacity max. 2000 Ah / 100% (full) Battery voltage 2nd battery (e.g. starter battery), 7 to 32 V (volts), internal measurement resolution 0.1 V Switching output freely programmable and tactile (PNP, plus potential 12V / 24V, max. 0.5A) incl. remaining run indicator Integrated level indicator for water tanksThe third important highlight of the Jupiter 200 is the level indicator for the fresh and waste water tanks. Together with the 16A switch for the fresh water pump, water management can also be implemented via the Jupiter combi panel.Other important features Voltage display for the starter battery Potential-free switching output for an external relay with freely programmable switching thresholds (% residual capacity) as deep discharge protection and as a main switch Indoor and outdoor thermometer incl. 1 indoor and 1 outdoor sensor Clock in 24-hour format Double USB charging socket (5 V/2.5 A) Simple, intuitive operation Important technical data Simple, intuitive operation Specially developed for use in motorhomes and camper vans Compact, simple installation low installation depth, low power consumption for 12 V or 24 V batteries Display dimensions: 200x65x30 mm Installation dimensions: 185x57x24 mm Weight without smart shunt: only 200g High-quality technology made in Germany Scope of delivery:1x Votronic 5748 VPC Jupiter 200 Multi-Panel1x operating instructions1x temperature sensor for indoor use1x temperature sensor for outside1x Smart measuring shunt for connecting the battery computer2x 5m connection cables (stereo cables)1x 35mm ground strap for measuring shunt connection

The Votronic 5749 VPC Power Control Jupiter 100 is part of an innovative series of combination panels that have been specially developed for installation in motorhomes. It combines the functions of the Merkur 5744 and Terra 5741 models and also has a lot more to offer as it combines a solar computer, battery computer and water management in one device. The 400 is the largest version of the new Multi-Panel series from Votronic. It differs from the 200 and 100 versions only in the maximum battery current that can be measured with the Jupiter Panel.The Jupiter series is currently the benchmark for measuring and display devices in the motorhome sector. No other panel offers such a wide range of functions, measurement and display options. Jupiter is also significantly cheaper than buying all the devices included individually.Integrated solar computerThe solar computer of the Jupiter combi panel corresponds in performance and function to the Solar-Computer S. The solar display is compatible with most Votronic charge controllers and the Triple series. Among other things, it shows the current solar power in W, the current solar current in A, the charged solar capacity in Ah and the charged solar energy in kWh. The solar computer provides a comprehensive picture of the current performance of your motorhome solar system.Integrated battery computer incl. smart shunt and ground strapAlso corresponds in terms of performance to the single device Battery Computer 400 S (manufacturer number 1269), which is also available as a 200 and 100A version. The Votronic battery computer provides a comprehensive impression of the condition of your starter and board battery and offers numerous functions.Microprocessor-controlled, the following values are measured, calculated and displayed: max. battery current: 400A On-board battery voltage 7 to 32 V (volts). Internal measurement resolution 0.1 V Allows conclusions to be drawn about the battery behavior under different loads and is used for functional checks, e.g. of the charger, solar system, alternator, etc. Flashing warning display in the event of overvoltage Battery current (charge/discharge) +/- 0 to max. +/- 1800 A, internal measurement resolution 0.1 A Checking the discharge currents (load) by consumers, indicated by a "-" sign, control of charging currents, indicated by a "Charge" sign Battery capacity (Ah and %) Remaining charge from 0 Ah / 0% (empty) to nominal capacity max. 2000 Ah / 100% (full) Battery voltage 2nd battery (e.g. starter battery), 7 to 32 V (volts), internal measurement resolution 0.1 V Switching output freely programmable and tactile (PNP, plus potential 12V / 24V, max. 0.5A) incl. remaining run indicator Integrated level indicator for water tanksThe third important highlight of the Jupiter 100 is the level indicator for the fresh and waste water tanks. Together with the 16A switch for the fresh water pump, water management can also be implemented via the Jupiter combi panel.Other important features Voltage display for the starter battery Potential-free switching output for an external relay with freely programmable switching thresholds (% residual capacity) as deep discharge protection and main switch Indoor and outdoor thermometer incl. 1 indoor and 1 outdoor sensor Clock in 24-hour format Double USB charging socket (5 V/2.5 A) Simple, intuitive operation Important technical data Simple, intuitive operation Compact, simple installation low installation depth, low power consumption for 12 V or 24 V batteries Display dimensions: 200x65x30 mm Installation dimensions: 185x57x24 mm Weight without smart shunt: only 200g Scope of delivery:1x Votronic 5749 VPC Jupiter 400 Multi-Panel1x operating instructions1x temperature sensor for indoor use1x temperature sensor for outside1x Smart measuring shunt for connecting the battery computer2x 5m connection cables1x ground strap matched to the performance of the battery computer

The Votronic Power Control (VPC) Terra Multi-Panel (MPN 5741) is an innovative monitoring and control system that has been specially developed for use in motorhomes. The bright display provides you with the most important information about your system. At the same time, the panel offers a wide range of setting options. Compared to the combination panel 5744 (Merkur), Terra is aimed at users who also want to have the fill levels of the water tanks on the "screen". Compared to the Merkur model, Terra does not have USB charging sockets or a clock display.Highlights of the Terra VPC Kompi-Panel Voltage display for on-board and starter battery Voltage-controlled deep discharge protection for the on-board battery Switching output for an external relay as main switch Solar computer (for data see p. 55) for all VOTRONIC solar charge controllers (from 2014) and VBCS Triple Level indicator for fresh water and waste water tank Switch for the fresh water pump max. 16 A Voltage display in V for the on-board and starter battery with undervoltage protection for the on-board battery Main switch for the on-board supply via switching output 1A (e.g. via Switch Unit 40 or Switch Unit 100) Level indicator in % for fresh water and waste water tank Current solar power in W, current solar current in A Charged solar capacity in Ah, charged solar energy in kWh Compatible with all VOTRONIC solar controllers from 2014 onwards with integrated solar computerIn addition to the functions and level displays for the tanks, the VPC Terra Panel also has an integrated solar computer which offers the same range of functions as the Votronic Solar Computer S 1250, which is available separately. The solar display is compatible with the Votronic Triple series and, with the exception of the small SR controllers, with all Votronic solar charge controllers. High-quality technology, stable construction and modern design are the hallmarks of the Info Panel Pro series. Self-explanatory symbols allow intuitive operation and the large displayed values are easy to read in all lighting conditions, even from a distance. The currently selected function is also indicated by several LEDs.Important key technical data Battery voltage on board / start: 12 / 12 and 24 V Current consumption / with USB active: 0-50 mA / Switching current main switch max. 0.3 A Switching current pump max.: 16A Display dimensions (WxHxD): 200x55x18 mm Installation dimensions (WxHxD): 175x43x12 mm Weight: 175 grams Scope of delivery:1x Votronic 5741 VPC Terra combination panel + operating instructions

Votronic LCD control board Jupiter 100 with Smart Shunt 25mm² The VOTRONIC Power Control (VPC for short) is an innovative multi-panel system for motorhomes that combines the most important functions and information in one user-friendly device. The information is shown on a bright, white backlit graphic display. The large values displayed are easy to read in all lighting conditions, even from a distance. Colored LEDs indicate the selected function at all times. The individual versions differ in their range of functions, which are designed to meet the specific requirements of different vehicle types. While the Jupiter version, for example, leaves almost nothing to be desired in terms of energy supply and fill levels, the Merkur version is particularly recommended for more compact vehicles, which often do not have fixed tanks.All devices have at least one voltage display for the on-board and starter battery and a switching output for an external relay as a main switch. A deactivatable alarm (beeper) on the panel and a message on the display draw attention to the fact that the battery has fallen below an adjustable energy threshold and the main switch will automatically switch off in a few seconds to prevent the battery from discharging too deeply.

The Votronic 5748 VPC Power Control Jupiter 200 is part of an innovative series of combination panels that have been specially developed for installation in motorhomes. It combines the functions of the Merkur 5744 and Terra 5741 models and also has a lot more to offer as it combines a solar computer, battery computer and water management in just one device. The 200 is the second most powerful version of the new Multi-Panel series from Votronic. It differs from the 100 and 400 versions only in the maximum battery current that can be measured by the Jupiter Panel and the supplied Smart Shunt + ground strap. In terms of functionality, the three devices are identical.The Jupiter series is currently the benchmark for measuring and display devices in the motorhome sector. No other panel offers such a wide range of functions, measurement and display options. Jupiter is also significantly cheaper than buying all the devices individually.Integrated solar computerThe solar computer of the Jupiter combi panel corresponds in performance and function to the Solar-Computer S. The solar display is compatible with most Votronic charge controllers and the Triple series. Among other things, it shows the current solar power in W, the current solar current in A, the charged solar capacity in Ah and the charged solar energy in kWh. The solar computer provides a comprehensive picture of the current performance of your motorhome solar system.Integrated battery computer incl. smart shunt and ground strapCorresponds in terms of performance to the single device Battery Computer 200 S, which is also available as a 100 and 400A version. The Votronic battery computer provides a comprehensive impression of the condition of your starter and board battery and offers numerous functions.Microprocessor-controlled, the following values are measured, calculated and displayed: Max. battery current: 200A On-board battery voltage 7 to 32 V (volts). Internal measurement resolution 0.1 V Allows conclusions to be drawn about the battery behavior under different loads and is used for function checks, e.g. of the charger, solar system, alternator, etc. Flashing warning display in the event of overvoltage Battery current (charge/discharge) +/- 0 to max. +/- 1800 A, internal measurement resolution 0.1 A Checking the discharge currents (load) by consumers, indicated by a "-" sign, control of charging currents, indicated by a "Charge" sign Battery capacity (Ah and %) Remaining charge from 0 Ah / 0% (empty) to nominal capacity max. 2000 Ah / 100% (full) Battery voltage 2nd battery (e.g. starter battery), 7 to 32 V (volts), internal measurement resolution 0.1 V Switching output freely programmable and tactile (PNP, plus potential 12V / 24V, max. 0.5A) incl. remaining run indicator Integrated level indicator for water tanksThe third important highlight of the Jupiter 200 is the level indicator for the fresh and waste water tanks. Together with the 16A switch for the fresh water pump, water management can also be implemented via the Jupiter combi panel.Other important features Voltage display for the starter battery Potential-free switching output for an external relay with freely programmable switching thresholds (% residual capacity) as deep discharge protection and as a main switch Indoor and outdoor thermometer incl. 1 indoor and 1 outdoor sensor Clock in 24-hour format Double USB charging socket (5 V/2.5 A) Simple, intuitive operation Important technical data Simple, intuitive operation Specially developed for use in motorhomes and camper vans Compact, simple installation low installation depth, low power consumption for 12 V or 24 V batteries Display dimensions: 200x65x30 mm Installation dimensions: 185x57x24 mm Weight without smart shunt: only 200g High-quality technology made in Germany Scope of delivery:1x Votronic 5748 VPC Jupiter 200 Multi-Panel1x operating instructions1x temperature sensor for indoor use1x temperature sensor for outside1x Smart measuring shunt for connecting the battery computer2x 5m connection cables (stereo cables)1x 35mm ground strap for measuring shunt connection

The Votronic VPC Power Control Merkur (MPN 5744) is part of an innovative series of combi panels that have been specially developed for installation in motorhomes. Merkur functions as a control board and can, for example, take over important switching functions based on parameters such as temperature or battery voltage via the integrated switching output. Merkur's LCD display provides up-to-date data on the charging voltage of the board and service battery. Another highlight is the integrated solar computer, which is identical to the LCD Solar Computer S in terms of functionality and display. It is compatible with most Votronic solar charge controllers and the Triple series.The bright display provides you with the most important information about your system. And shows the time. The two built-in USB charging sockets, each with 2.5A output power at 5V, provide additional convenience. Merkur's range of services is rounded off with the temperature display for the vehicle interior and the outside temperature. The two required temperature sensors are already included in the scope of delivery.Highlights of the VPC Merkur at a glance Voltage display for on-board and starter battery Voltage-controlled deep discharge protection for the on-board battery Switching output for an external relay as main switch Integrated solar computer (see page 55 for data) for all VOTRONIC solar charge controllers (from 2014) and VBCS Triple displays: current solar power in W, current solar current in A, charged solar capacity in Ah, charged solar energy in kWh Voltage display in V of the on-board and starter battery with undervoltage protection for the on-board battery Main switch for the on-board supply via switching output 1A (e.g. via Switch Unit 40 or Switch Unit 100) Solid technology in a stylish design with high ease of useHigh-quality technology, stable construction and modern design are the hallmarks of the combi panels. Self-explanatory symbols allow intuitive operation, with the large values displayed being easy to read in all lighting conditions, even from a distance. The currently selected function is also indicated by several LEDs.Important key technical data Battery voltage on board / start: 12 / 12 and 24 V Current consumption / with USB active: 0-50 mA / Switching current main switch max. 0.3 A Switching current pump max.: 16A Display dimensions (WxHxD): 200x65x30 mm Installation dimensions (WxHxD): 185x57x24 mm Weight: 200 grams Scope of delivery:1x Votronic 5744 VPC Merkur Combi Panel +1x operating instructions1x temperature sensor for indoor use1x temperature sensor for outside