The VOTRONIC Battery Protector 40 is connected between the supply battery and the consumer and is suitable for all lead-acid battery types (acid, gel, AGM) and makes. They protect the battery from dangerous deep discharge as well as the consumers and equipment from undervoltage and overvoltage and, controlled by an external switch, can also serve as a remote-controlled battery master switch. The reset to normal operation takes place automatically as soon as the voltage has risen again, e.g. to 12.5 V, due to battery recovery or brief charging. The switch-off can also be canceled manually using the "EMERGENCY ON" function. The Battery Protector 40 can be operated remotely via the "Sensor +" terminal using a simple switch (1-pole ON / OFF). This makes it a powerful battery main switch. The EMERGENCY ON function can also be operated remotelyImportant product features Switching current 40 A, briefly overloadable up to 60 A, externally visible switching status display EMERGENCY STOP function via switch on the device, can also be operated remotely via external switch Automatic reset as soon as the battery voltage returns to the normal range (charging) Separate sensor cable and switching thresholds with hysteresis and timer functions for trouble-free operation Bistable power relay, very low power consumption, less than 3 mA (according to EN 13976) No self-consumption when switched off via external switch, e.g. remote control as main battery switch Solid screw terminals for battery and load cable cross-sections up to 10 mm² "Motor" version with higher switch-off thresholds maintains the starting capability of emergency vehicles with only one battery circuit in accordance with DIN EN 1789 Technical data MPN 3075 Operating voltage: 12V Switching current (continuous/short): 40A/60A Switching threshold undervoltage: 10.7V Undervoltage reset point: 12.8V Overvoltage protection (off/on): 15.5V / 15V Weight: 97 grams

The VOTRONIC Battery Protector 40 Motor is connected between the supply battery and the consumer and is suitable for all lead-acid battery types (acid, gel, AGM) and makes. They protect the battery from dangerous deep discharge as well as the consumers and equipment from undervoltage and overvoltage and, controlled by an external switch, can also serve as a remote-controlled battery master switch. Compared to the "normal" Battery Protector 40, the motor version switches to undervoltage at 11.8V. The reset to normal operation takes place automatically as soon as the voltage has risen again, e.g. to 12.5 V, due to battery recovery or brief charging. The switch-off can also be canceled manually using the "EMERGENCY ON" function. The Battery Protector 40 can be operated remotely via the "Sensor +" terminal using a simple switch (1-pole ON / OFF). This makes it a powerful battery main switch. The EMERGENCY ON function can also be operated remotely Important product features Switching current 40 A, briefly overloadable up to 60 A, externally visible switching status displayEMERGENCY STOP function via switch on the device, can also be operated remotely via external switchAutomatic reset as soon as the battery voltage returns to the normal range (charging)Separate sensor cable and switching thresholds with hysteresis and timer functions for trouble-free operationBistable power relay, very low power consumption, less than 3 mA (according to EN 13976)No self-consumption when switched off via external switch, e.g. remote control as main battery switchSolid screw terminals for battery and load cable cross-sections up to 10 mm²"Motor" version with higher switch-off thresholds maintains the starting capability of emergency vehicles with only one battery circuit in accordance with DIN EN 1789Technical data MPN 3075Operating voltage: 12VSwitching current (continuous/short): 40A/60ASwitching threshold undervoltage: 11.8VUndervoltage reset point: 12.8VOvervoltage protection (off/on): 15.5V / 15VWeight: 97 grams

The VOTRONIC 6075 Battery Protector 40 24 is connected between the supply battery and the consumer and is suitable for all lead-acid battery types (acid, gel, AGM) and makes. They protect the battery from dangerous deep discharge as well as the consumers and equipment from undervoltage and overvoltage and, controlled by an external switch, can also serve as a remote-controlled battery master switch The reset to normal operation takes place automatically as soon as the voltage has risen again, e.g. to 25 V, due to battery recovery or brief charging. The switch-off can also be canceled manually using the "EMERGENCY ON" function. The Battery Protector 40 can be operated remotely via the "Sensor +" terminal using a simple switch (1-pole ON / OFF). This makes it a powerful battery main switch. The EMERGENCY ON function can also be operated remotely Important product features Switching current 40 A, briefly overloadable up to 60 A, externally visible switching status displayEMERGENCY STOP function via switch on the device, can also be operated remotely via external switchAutomatic reset as soon as the battery voltage returns to the normal range (charging)Separate sensor cable and switching thresholds with hysteresis and timer functions for trouble-free operationBistable power relay, very low power consumption, less than 3 mA (according to EN 13976)No self-consumption when switched off via external switch, e.g. remote control as main battery switchSolid screw terminals for battery and load cable cross-sections up to 10 mm²"Motor" version with higher switch-off thresholds maintains the starting capability of emergency vehicles with only one battery circuit in accordance with DIN EN 1789Technical data MPN 6075Operating voltage: 24VSwitching current (continuous/short): 40A/60ASwitching threshold undervoltage: 21.4VUndervoltage reset point: 25VOvervoltage protection (off/on): 31V/30VWeight: 97 gramsDimensions (W x H x D) 90 x 38 x 60 mm

Der VOTRONIC 6073 Battery Protector 40 24 Motor wird zwischen Versorgungsbatterie und Verbraucher geschaltet und ist für alle Bleibatterie-Typen (Säure, Gel, AGM) und -Fabrikate geeignet. Sie schützen die Batterie vor gefährlicher Tiefentladung sowie die Verbraucher und Ausrüstung vor Unter- und Überspannung und kann, von einem externen Schalter gesteuert, auch noch als fernbedienbare Batterie-Hauptschalter dienen. Im Vergleich zum "normalen" Battery Protector 40 24 schaltet die Motor Version schon bei 23,6V auf Unterspannung. Die Rücksetzung auf Normalbetrieb erfolgt automatisch sobald die Spannung durch Batterieerholung oder kurzes Laden wieder z. B. auf 25 V angestiegen ist. Auch manuell lässt sich die Abschaltung durch die "NOT-EIN" Funktion aufheben. Der Battery Protector 40 kann über die Klemme "Sensor +" mit einem einfachen Schalter (1pol. EIN / AUS) fernbedient werden. Er wird damit zum leistungsfähigen Batterie-Hauptschalter. Auch die NOT-EIN Funktion ist damit fernbedienbar wichtige Produktmerkmale Schaltstrom 40 A, kurzzeitig bis 60 A überlastbar, von außen sichtbare Schaltzustands-AnzeigeNOT-EIN Funktion über Schalter am Gerät, durch externen Schalter auch fernbedienbarAutomatische Rücksetzung, sobald sich die Batteriespannung wieder im normalen Bereich befindet (Ladung)Separates Fühlerkabel und Schaltschwellen mit Hysterese und Timerfunktionen für störungsfreie FunktionBistabiles Leistungsrelais, sehr geringer Eigenverbrauch, weniger als 3 mA (nach EN 13976)Kein Eigenverbrauch bei Abschaltung über externen Schalter, z.B. Fernbedienung als Batterie-HauptschalterSolide Schraubklemmen für Batterie- und Last- Kabelquerschnitte bis 10 mm²Ausführung „Motor“ mit höheren Abschaltschwellen erhält die Startfähigkeit bei Einsatzfahrzeugen mit nur einem Batteriekreis nach DIN EN 1789 technische Daten MPN 6073Betriebsspannung: 24VSchaltstrom (Dauer/Kurz): 40A/60ASchaltschwelle Unterspannung: 21,4VRücksetzpunkt Unterspannung: 25,6VSchutz vor Überspannung (Aus/Ein): 30V/31VGewicht: 97 GrammMaße (B x H x T) 90 x 38 x 60 mm (inkl. Befestigungs-Flansche, ohne Anschlüsse)

The VOTRONIC Battery Protector 100 is connected between the supply battery and the consumer and is suitable for all types (acid, gel, AGM) and brands of lead-acid batteries. It protects the battery from dangerous deep discharge and protects consumers and equipment from under- and overvoltage. Controlled by an external switch, it can also serve as a remote-controlled battery main switch.Compared to the “normal” Battery Protector 40, the motor version switches to undervoltage at 11.8V.The device automatically resets to normal operation as soon as the voltage has risen to 12.5 V, for example, due to battery recovery or a short charging period. The shutdown can also be manually canceled using the “EMERGENCY ON” function. The Battery Protector 100 can be remotely controlled via the “Sensor +” terminal using a simple switch (1-pole ON/OFF) via the “Sensor +” terminal. This turns it into a powerful main battery switch. The EMERGENCY ON function can also be remotely controlled.Important product featuresHigh switching current 100 A, can be overloaded to 180 A for short periods; switchable to 12V/24V vehicle electrical systemIntelligent automatic switching threshold always calculates the correct “empty” switch-off point based on stored battery characteristic curves to ensure reliable battery protection with optimum capacity utilization, both for high consumers (low switching threshold with shorter response time) and very small loads (e.g. “hidden” power consumers with response times over days/months with high response thresholds)Optional operation also with 3 fixed switch-off thresholds (manually) adjustableThe higher setting values maintain the starting capability of emergency vehicles with only one battery circuit (according to DIN EN 1789)Pre-alarm with visual (LED) and acoustic (beeper, can be switched off) display and separate warning switch output (PNP, positive output 0.2 A) enables the user to take timely countermeasures (e.g., switch off unnecessary consumers)Solid battery screw terminals for M6 cable lugs, protective caps included in deliveryTechnical dataMPN 3078Operating voltage: 12V/24Switching current (continuous/short): 100A/180ASwitching threshold for undervoltage in 12V mode: 10.6V / 11.5V / 11.8VSwitching threshold for undervoltage in 24V mode: 21.2V / 23V / 23.6VReset point for undervoltage in 12V mode: 12.4V / 12.5V / 12.8VReset point for undervoltage in 24V mode: 24.8V / 25V / 25.6VOvervoltage protection (off/on): 15.5V / 15VWeight: 180 grams